lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Mon, 29 Aug 2022 11:34:28 +0200
From:   Pali Rohár <pali@...nel.org>
To:     Lorenzo Pieralisi <lpieralisi@...nel.org>
Cc:     Thomas Petazzoni <thomas.petazzoni@...tlin.com>,
        Rob Herring <robh@...nel.org>,
        Krzysztof Wilczyński <kw@...ux.com>,
        Bjorn Helgaas <bhelgaas@...gle.com>, linux-pci@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2] PCI: aardvark: Add support for PCI Bridge Subsystem
 Vendor ID on emulated bridge

On Monday 29 August 2022 11:31:32 Lorenzo Pieralisi wrote:
> On Tue, Jul 12, 2022 at 12:59:15AM +0200, Pali Rohár wrote:
> > Register with Subsystem Device/Vendor ID is at offset 0x2c. Export is via
> > emulated bridge.
> 
> "Export it..." I suppose.

Yes, it is a typo :-(

> So in short, this patch enables support for the Subsystem Device/Vendor
> ID - by reading it in the PCI controller config space and storing it
> in the emulated bridge control structures, so that it is exposed in
> the respective PCI capability.

Yes, it reads it from internal aardvark registers and stores it into the
emulated bridge config space.

> Correct ?
> 
> Thanks,
> Lorenzo
> 
> > After this change Subsystem ID is visible in lspci output at line:
> > 
> >   Capabilities: [40] Subsystem
> > 
> > Signed-off-by: Pali Rohár <pali@...nel.org>
> > 
> > ---
> > Changes in v2:
> > * Fix wrong rebase, do not add PCIE_CORE_EXP_ROM_BAR_REG
> > ---
> >  drivers/pci/controller/pci-aardvark.c | 3 +++
> >  1 file changed, 3 insertions(+)
> > 
> > diff --git a/drivers/pci/controller/pci-aardvark.c b/drivers/pci/controller/pci-aardvark.c
> > index 74511f015168..060936ef01fe 100644
> > --- a/drivers/pci/controller/pci-aardvark.c
> > +++ b/drivers/pci/controller/pci-aardvark.c
> > @@ -32,6 +32,7 @@
> >  #define PCIE_CORE_DEV_ID_REG					0x0
> >  #define PCIE_CORE_CMD_STATUS_REG				0x4
> >  #define PCIE_CORE_DEV_REV_REG					0x8
> > +#define PCIE_CORE_SSDEV_ID_REG					0x2c
> >  #define PCIE_CORE_PCIEXP_CAP					0xc0
> >  #define PCIE_CORE_ERR_CAPCTL_REG				0x118
> >  #define     PCIE_CORE_ERR_CAPCTL_ECRC_CHK_TX			BIT(5)
> > @@ -982,6 +983,8 @@ static int advk_sw_pci_bridge_init(struct advk_pcie *pcie)
> >  	/* Indicates supports for Completion Retry Status */
> >  	bridge->pcie_conf.rootcap = cpu_to_le16(PCI_EXP_RTCAP_CRSVIS);
> >  
> > +	bridge->subsystem_vendor_id = advk_readl(pcie, PCIE_CORE_SSDEV_ID_REG) & 0xffff;
> > +	bridge->subsystem_id = advk_readl(pcie, PCIE_CORE_SSDEV_ID_REG) >> 16;
> >  	bridge->has_pcie = true;
> >  	bridge->data = pcie;
> >  	bridge->ops = &advk_pci_bridge_emul_ops;
> > -- 
> > 2.20.1
> > 

Powered by blists - more mailing lists