| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20220830030139.29899-3-lvjianmin@loongson.cn>
Date: Tue, 30 Aug 2022 11:01:39 +0800
From: Jianmin Lv <lvjianmin@...ngson.cn>
To: lpieralisi@...nel.org, robin.murphy@....com, chenhuacai@...ngson.cn
Cc: guohanjun@...wei.com, sudeep.holla@....com, rafael@...nel.org,
lenb@...nel.org, robert.moore@...el.com,
linux-kernel@...r.kernel.org, linux-acpi@...r.kernel.org,
loongarch@...ts.linux.dev
Subject: [PATCH V3 2/2] LoongArch: Remove ARCH_HAS_PHYS_TO_DMA
Use _DMA defined in ACPI spec for translation between
DMA address and CPU address, and implement acpi_arch_dma_setup
for initializing dev->dma_range_map, where acpi_dma_get_range
is called for parsing _DMA.
e.g.
If we have two dma ranges:
cpu address dma address size offset
0x200080000000 0x2080000000 0x400000000 0x1fe000000000
0x400080000000 0x4080000000 0x400000000 0x3fc000000000
_DMA for pci devices should be declared in host bridge as
flowing:
Name (_DMA, ResourceTemplate() {
QWordMemory (ResourceProducer,
PosDecode,
MinFixed,
MaxFixed,
NonCacheable,
ReadWrite,
0x0,
0x4080000000,
0x447fffffff,
0x3fc000000000,
0x400000000,
,
,
)
QWordMemory (ResourceProducer,
PosDecode,
MinFixed,
MaxFixed,
NonCacheable,
ReadWrite,
0x0,
0x2080000000,
0x247fffffff,
0x1fe000000000,
0x400000000,
,
,
)
})
Signed-off-by: Jianmin Lv <lvjianmin@...ngson.cn>
---
arch/loongarch/Kconfig | 1 -
arch/loongarch/kernel/dma.c | 52 +++++++++++++++++--------------------------
arch/loongarch/kernel/setup.c | 2 +-
include/linux/acpi.h | 9 +++++---
4 files changed, 28 insertions(+), 36 deletions(-)
diff --git a/arch/loongarch/Kconfig b/arch/loongarch/Kconfig
index b57daee..9dedcf9 100644
--- a/arch/loongarch/Kconfig
+++ b/arch/loongarch/Kconfig
@@ -7,7 +7,6 @@ config LOONGARCH
select ARCH_ENABLE_MEMORY_HOTPLUG
select ARCH_ENABLE_MEMORY_HOTREMOVE
select ARCH_HAS_ACPI_TABLE_UPGRADE if ACPI
- select ARCH_HAS_PHYS_TO_DMA
select ARCH_HAS_PTE_SPECIAL
select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
select ARCH_INLINE_READ_LOCK if !PREEMPTION
diff --git a/arch/loongarch/kernel/dma.c b/arch/loongarch/kernel/dma.c
index 8c9b531..7a9c6a9 100644
--- a/arch/loongarch/kernel/dma.c
+++ b/arch/loongarch/kernel/dma.c
@@ -2,39 +2,29 @@
/*
* Copyright (C) 2020-2022 Loongson Technology Corporation Limited
*/
-#include <linux/init.h>
+#include <linux/acpi.h>
#include <linux/dma-direct.h>
-#include <linux/dma-mapping.h>
-#include <linux/dma-map-ops.h>
-#include <linux/swiotlb.h>
-#include <asm/bootinfo.h>
-#include <asm/dma.h>
-#include <asm/loongson.h>
-
-/*
- * We extract 4bit node id (bit 44~47) from Loongson-3's
- * 48bit physical address space and embed it into 40bit.
- */
-
-static int node_id_offset;
-
-dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr)
-{
- long nid = (paddr >> 44) & 0xf;
-
- return ((nid << 44) ^ paddr) | (nid << node_id_offset);
-}
-
-phys_addr_t dma_to_phys(struct device *dev, dma_addr_t daddr)
+void acpi_arch_dma_setup(struct device *dev)
{
- long nid = (daddr >> node_id_offset) & 0xf;
+ int ret;
+ u64 mask, end = 0;
+ const struct bus_dma_region *map = NULL;
+
+ ret = acpi_dma_get_range(dev, &map);
+ if (!ret && map) {
+ const struct bus_dma_region *r = map;
+
+ for (end = 0; r->size; r++) {
+ if (r->dma_start + r->size - 1 > end)
+ end = r->dma_start + r->size - 1;
+ }
+
+ mask = DMA_BIT_MASK(ilog2(end) + 1);
+ dev->bus_dma_limit = end;
+ dev->dma_range_map = map;
+ dev->coherent_dma_mask = min(dev->coherent_dma_mask, mask);
+ *dev->dma_mask = min(*dev->dma_mask, mask);
+ }
- return ((nid << node_id_offset) ^ daddr) | (nid << 44);
-}
-
-void __init plat_swiotlb_setup(void)
-{
- swiotlb_init(true, SWIOTLB_VERBOSE);
- node_id_offset = ((readl(LS7A_DMA_CFG) & LS7A_DMA_NODE_MASK) >> LS7A_DMA_NODE_SHF) + 36;
}
diff --git a/arch/loongarch/kernel/setup.c b/arch/loongarch/kernel/setup.c
index c74860b..974f085 100644
--- a/arch/loongarch/kernel/setup.c
+++ b/arch/loongarch/kernel/setup.c
@@ -247,7 +247,7 @@ static void __init arch_mem_init(char **cmdline_p)
sparse_init();
memblock_set_bottom_up(true);
- plat_swiotlb_setup();
+ swiotlb_init(true, SWIOTLB_VERBOSE);
dma_contiguous_reserve(PFN_PHYS(max_low_pfn));
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index 34e0545..33977b87 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -278,14 +278,17 @@ int acpi_table_parse_madt(enum acpi_madt_type id,
void acpi_numa_x2apic_affinity_init(struct acpi_srat_x2apic_cpu_affinity *pa);
+#if defined(CONFIG_ARM64) || defined(CONFIG_LOONGARCH)
+void acpi_arch_dma_setup(struct device *dev);
+#else
+static inline void acpi_arch_dma_setup(struct device *dev) { }
+#endif
+
#ifdef CONFIG_ARM64
void acpi_numa_gicc_affinity_init(struct acpi_srat_gicc_affinity *pa);
-void acpi_arch_dma_setup(struct device *dev);
#else
static inline void
acpi_numa_gicc_affinity_init(struct acpi_srat_gicc_affinity *pa) { }
-static inline void
-acpi_arch_dma_setup(struct device *dev) { }
#endif
int acpi_numa_memory_affinity_init (struct acpi_srat_mem_affinity *ma);
--
1.8.3.1
Powered by blists - more mailing lists