[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <d1f49935-b465-7495-d345-f35bf4dea9f9@linaro.org>
Date: Tue, 30 Aug 2022 20:38:10 +0300
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Chunfeng Yun <chunfeng.yun@...iatek.com>,
Vinod Koul <vkoul@...nel.org>, Rob Herring <robh+dt@...nel.org>
Cc: Kishon Vijay Abraham I <kishon@...com>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Matthias Brugger <matthias.bgg@...il.com>,
linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org, linux-phy@...ts.infradead.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
Krzysztof Kozlowski <krzysztof.kozlowski@...onical.com>,
Eddie Hung <eddie.hung@...iatek.com>
Subject: Re: [PATCH v2 2/7] dt-bindings: phy: mediatek,tphy: add property to
set pre-emphasis
On 29/08/2022 11:08, Chunfeng Yun wrote:
> Add a property to set usb2 phy's pre-emphasis, which used to widen eye
> opening and boost eye swing.
>
> Signed-off-by: Chunfeng Yun <chunfeng.yun@...iatek.com>
> ---
> v2: Add more description suggested by Krzysztof
> ---
> .../devicetree/bindings/phy/mediatek,tphy.yaml | 10 ++++++++++
> 1 file changed, 10 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
> index 848edfb1f677..e0754fb44451 100644
> --- a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
> +++ b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
> @@ -219,6 +219,16 @@ patternProperties:
> minimum: 1
> maximum: 15
>
> + mediatek,pre-emphasis:
> + description:
> + The level of pre-emphasis which used to widen the eye opening and
> + boost eye swing, the unit step is about 4.16% increment; e.g. the
> + level 1 means amplitude increases about 4.16%, the level 2 is about
> + 8.3% etc. (U2 phy)
> + $ref: /schemas/types.yaml#/definitions/uint32
As I proposed - use instead common units. Since only three values are
allowed - make it an enum. These bindings are expected to be
usable/applicable on several devices, so units, not register values
which can change between devices, are the proper and reliable way to
describe a feature.
Best regards,
Krzysztof
Powered by blists - more mailing lists