| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20220901072414.1923075-8-iskren.chernev@gmail.com>
Date: Thu, 1 Sep 2022 10:24:06 +0300
From: Iskren Chernev <iskren.chernev@...il.com>
To: Bjorn Andersson <bjorn.andersson@...aro.org>,
Rob Herring <robh+dt@...nel.org>
Cc: phone-devel@...r.kernel.org, ~postmarketos/upstreaming@...ts.sr.ht,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
Iskren Chernev <iskren.chernev@...il.com>,
Andy Gross <agross@...nel.org>,
Konrad Dybcio <konrad.dybcio@...ainline.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
linux-kernel@...r.kernel.org
Subject: [PATCH 07/14] arm64: dts: qcom: sm6115: Add sdhci nodes and related pinctrl
Add support for the two sdhci's present on the SM6115 and the related
pinctrl.
Signed-off-by: Iskren Chernev <iskren.chernev@...il.com>
---
arch/arm64/boot/dts/qcom/sm6115.dtsi | 171 +++++++++++++++++++++++++++
1 file changed, 171 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
index 00fd185c87aa..cde963c56ac9 100644
--- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
@@ -399,6 +399,110 @@ tlmm: pinctrl@...000 {
gpio-ranges = <&tlmm 0 0 121>;
#gpio-cells = <2>;
interrupt-controller;
+
+ sdc1_state_on: sdc1-on {
+ clk {
+ pins = "sdc1_clk";
+ bias-disable;
+ drive-strength = <16>;
+ };
+
+ cmd {
+ pins = "sdc1_cmd";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+
+ data {
+ pins = "sdc1_data";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+
+ rclk {
+ pins = "sdc1_rclk";
+ bias-pull-down;
+ };
+ };
+
+ sdc1_state_off: sdc1-off {
+ clk {
+ pins = "sdc1_clk";
+ bias-disable;
+ drive-strength = <2>;
+ };
+
+ cmd {
+ pins = "sdc1_cmd";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ data {
+ pins = "sdc1_data";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ rclk {
+ pins = "sdc1_rclk";
+ bias-pull-down;
+ };
+ };
+
+ sdc2_state_on: sdc2-on {
+ clk {
+ pins = "sdc2_clk";
+ bias-disable;
+ drive-strength = <16>;
+ };
+
+ cmd {
+ pins = "sdc2_cmd";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+
+ data {
+ pins = "sdc2_data";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+
+ sd-cd {
+ pins = "gpio88";
+ function = "gpio";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+ };
+
+ sdc2_state_off: sdc2-off {
+ clk {
+ pins = "sdc2_clk";
+ bias-disable;
+ drive-strength = <2>;
+ };
+
+ cmd {
+ pins = "sdc2_cmd";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ data {
+ pins = "sdc2_data";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ sd-cd {
+ pins = "gpio88";
+ function = "gpio";
+ bias-disable;
+ drive-strength = <2>;
+ };
+ };
};
gcc: clock-controller@...0000 {
@@ -449,6 +553,73 @@ rpm_msg_ram: memory@...0000 {
reg = <0x45f0000 0x7000>;
};
+ sdhc_1: sdhci@...4000 {
+ compatible = "qcom,sm6115-sdhci", "qcom,sdhci-msm-v5";
+ reg = <0x4744000 0x1000>, <0x4745000 0x1000>, <0x4748000 0x8000>;
+ reg-names = "hc", "cqhci", "ice";
+
+ interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hc_irq", "pwr_irq";
+
+ clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+ <&gcc GCC_SDCC1_APPS_CLK>,
+ <&xo_board>,
+ <&gcc GCC_SDCC1_ICE_CORE_CLK>;
+ clock-names = "iface", "core", "xo", "ice_core_clk";
+
+ pinctrl-0 = <&sdc1_state_on>;
+ pinctrl-1 = <&sdc1_state_off>;
+ pinctrl-names = "default", "sleep";
+
+ bus-width = <8>;
+ non-removable;
+ status = "disabled";
+ };
+
+ sdhc_2: sdhci@...4000 {
+ compatible = "qcom,sm6115-sdhci", "qcom,sdhci-msm-v5";
+ reg = <0x04784000 0x1000>;
+ reg-names = "hc";
+
+ interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hc_irq", "pwr_irq";
+
+ clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+ <&gcc GCC_SDCC2_APPS_CLK>,
+ <&xo_board>;
+ clock-names = "iface", "core", "xo";
+
+ pinctrl-0 = <&sdc2_state_on>;
+ pinctrl-1 = <&sdc2_state_off>;
+ pinctrl-names = "default", "sleep";
+
+ power-domains = <&rpmpd SM6115_VDDCX>;
+ operating-points-v2 = <&sdhc2_opp_table>;
+ iommus = <&apps_smmu 0x00a0 0x0>;
+ resets = <&gcc GCC_SDCC2_BCR>;
+
+ bus-width = <4>;
+ qcom,dll-config = <0x0007642c>;
+ qcom,ddr-config = <0x80040868>;
+ status = "disabled";
+
+ sdhc2_opp_table: sdhc2-opp-table {
+ compatible = "operating-points-v2";
+
+ opp-100000000 {
+ opp-hz = /bits/ 64 <100000000>;
+ required-opps = <&rpmpd_opp_low_svs>;
+ };
+
+ opp-202000000 {
+ opp-hz = /bits/ 64 <202000000>;
+ required-opps = <&rpmpd_opp_nom>;
+ };
+ };
+ };
+
usb3: usb@...8800 {
compatible = "qcom,sm6115-dwc3", "qcom,dwc3";
reg = <0x04ef8800 0x400>;
--
2.37.2
Powered by blists - more mailing lists