| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <28d62f85365b2a718e143cf5bd0c1230bee8168f.camel@mediatek.com>
Date: Thu, 1 Sep 2022 19:03:00 +0800
From: Peter Chiu <chui-hao.chiu@...iatek.com>
To: Matthias Brugger <matthias.bgg@...il.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>
CC: <devicetree@...r.kernel.org>, Ryder Lee <ryder.Lee@...iatek.com>,
"Evelyn Tsai" <evelyn.tsai@...iatek.com>,
Sam Shih <sam.shih@...iatek.com>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-mediatek@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v4] arm64: dts: mt7986: add built-in Wi-Fi device nodes
On Thu, 2022-09-01 at 10:13 +0200, Matthias Brugger wrote:
>
> On 01/09/2022 05:47, Peter Chiu wrote:
> > On Tue, 2022-08-30 at 10:43 +0200, Matthias Brugger wrote:
> > >
> > > On 30/06/2022 11:49, Peter Chiu wrote:
> > > > This enables built-in 802.11ax Wi-Fi support.
> > > >
> > > > Reviewed-by: Sam Shih <sam.shih@...iatek.com>
> > > > Reviewed-by: Ryder Lee <ryder.lee@...iatek.com>
> > > > Signed-off-by: Peter Chiu <chui-hao.chiu@...iatek.com>
> > > > ---
> > > > v2: add clocks and clock-names.
> > > > v3: rename wmac to wifi and change underscores to dash in node
> > > > names.
> > > > v4: rebase to the latest codebase.
> > > > ---
> > > > arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts | 41
> > > > +++++++++++++++++++
> > > > arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 23
> > > > +++++++++++
> > > > arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts | 43
> > > > ++++++++++++++++++++
> > > > 3 files changed, 107 insertions(+)
> > > >
> > > > diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
> > > > b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
> > > > index 882277a..28cd168 100644
> > > > --- a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
> > > > +++ b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
> > > > @@ -115,6 +115,13 @@ &uart2 {
> > > > status = "okay";
> > > > };
> > > >
> > > > +&wifi {
> > > > + status = "okay";
> > > > + pinctrl-names = "default", "dbdc";
> > > > + pinctrl-0 = <&wf_2g_5g_pins>;
> > > > + pinctrl-1 = <&wf_dbdc_pins>;
> > > > +};
> > > > +
> > > > &pio {
> > > > uart1_pins: uart1-pins {
> > > > mux {
> > > > @@ -129,4 +136,38 @@ mux {
> > > > groups = "uart2";
> > > > };
> > > > };
> > > > +
> > > > + wf_2g_5g_pins: wf-2g-5g-pins {
> > > > + mux {
> > > > + function = "wifi";
> > > > + groups = "wf_2g", "wf_5g";
> > >
> > > yaml says:
> > > - if:
> > > properties:
> > > function:
> > > const: wifi
> > > then:
> > > properties:
> > > groups:
> > > enum: [wf_2g, wf_5g, wf_dbdc]
> > >
> > >
> > > Did you run the binding checker against this DTS?
> >
> > The binding checker showed the groups setting is too long. We will
> > send
> > a patch to fix yaml by setting groups as string-array.
> >
>
> Wait, does this mean the binding was wrong in the first place, as you
> can't set
> all three groups in one node?
Yes, we need to set two groups in a node for the board which supports
wifi 2g and wifi 5g simultaneously. The bindings lack the following
code which set groups to string-array.
$ref: /schemas/types.yaml#/definitions/string-array
>
> > > Why can't we just merge wf_2g_5g_pins with wf_dbdc_pins?
> >
> > Since they use different pinmux settings on the same pin, we need
> > to
> > distinguish them.
> >
>
> wf-2g-5g-pins and wf-dbdc-pins set the same drive-strength to the
> very same
> group of pins. What do you mean exactly? Sorry I'm not an expert on
> the pinctrl
> infrastructure.
wf-2g-5g-pins and wf-dbdc-pins use different functions by setting
different groups. But I set useless drive-strength in the wf-dbdc-pins
node. I will remove them in the next version.
Best Regards,
Peter Chiu
>
> Regards,
> Matthias
>
>
> > Best Regards,
> > Peter Chiu
> > >
> > > Regards,
> > > Matthias
> > >
> > > > + };
> > > > + conf {
> > > > + pins = "WF0_HB1", "WF0_HB2", "WF0_HB3",
> > > > "WF0_HB4",
> > > > + "WF0_HB0", "WF0_HB0_B",
> > > > "WF0_HB5",
> > > > "WF0_HB6",
> > > > + "WF0_HB7", "WF0_HB8", "WF0_HB9",
> > > > "WF0_HB10",
> > > > + "WF0_TOP_CLK", "WF0_TOP_DATA",
> > > > "WF1_HB1",
> > > > + "WF1_HB2", "WF1_HB3", "WF1_HB4",
> > > > "WF1_HB0",
> > > > + "WF1_HB5", "WF1_HB6", "WF1_HB7",
> > > > "WF1_HB8",
> > > > + "WF1_TOP_CLK", "WF1_TOP_DATA";
> > > > + drive-strength = <4>;
> > > > + };
> > > > + };
> > > > +
> > > > + wf_dbdc_pins: wf-dbdc-pins {
> > > > + mux {
> > > > + function = "wifi";
> > > > + groups = "wf_dbdc";
> > > > + };
> > > > + conf {
> > > > + pins = "WF0_HB1", "WF0_HB2", "WF0_HB3",
> > > > "WF0_HB4",
> > > > + "WF0_HB0", "WF0_HB0_B",
> > > > "WF0_HB5",
> > > > "WF0_HB6",
> > > > + "WF0_HB7", "WF0_HB8", "WF0_HB9",
> > > > "WF0_HB10",
> > > > + "WF0_TOP_CLK", "WF0_TOP_DATA",
> > > > "WF1_HB1",
> > > > + "WF1_HB2", "WF1_HB3", "WF1_HB4",
> > > > "WF1_HB0",
> > > > + "WF1_HB5", "WF1_HB6", "WF1_HB7",
> > > > "WF1_HB8",
> > > > + "WF1_TOP_CLK", "WF1_TOP_DATA";
> > > > + drive-strength = <4>;
> > > > + };
> > > > + };
> > > > };
> > > > diff --git a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
> > > > b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
> > > > index e3a407d..890ded0 100644
> > > > --- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
> > > > +++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
> > > > @@ -7,6 +7,7 @@
> > > > #include <dt-bindings/interrupt-controller/irq.h>
> > > > #include <dt-bindings/interrupt-controller/arm-gic.h>
> > > > #include <dt-bindings/clock/mt7986-clk.h>
> > > > +#include <dt-bindings/reset/mt7986-resets.h>
> > > >
> > > > / {
> > > > interrupt-parent = <&gic>;
> > > > @@ -70,6 +71,11 @@ secmon_reserved: secmon@...00000 {
> > > > reg = <0 0x43000000 0 0x30000>;
> > > > no-map;
> > > > };
> > > > +
> > > > + wmcpu_emi: wmcpu-reserved@...00000 {
> > > > + no-map;
> > > > + reg = <0 0x4fc00000 0 0x00100000>;
> > > > + };
> > > > };
> > > >
> > > > timer {
> > > > @@ -261,6 +267,23 @@ eth: ethernet@...00000 {
> > > > #size-cells = <0>;
> > > > status = "disabled";
> > > > };
> > > > +
> > > > + wifi: wifi@...00000 {
> > > > + compatible = "mediatek,mt7986-wmac";
> > > > + resets = <&watchdog
> > > > MT7986_TOPRGU_CONSYS_SW_RST>;
> > > > + reset-names = "consys";
> > > > + clocks = <&topckgen
> > > > CLK_TOP_CONN_MCUSYS_SEL>,
> > > > + <&topckgen
> > > > CLK_TOP_AP2CNN_HOST_SEL>;
> > > > + clock-names = "mcu", "ap2conn";
> > > > + reg = <0 0x18000000 0 0x1000000>,
> > > > + <0 0x10003000 0 0x1000>,
> > > > + <0 0x11d10000 0 0x1000>;
> > > > + interrupts = <GIC_SPI 213
> > > > IRQ_TYPE_LEVEL_HIGH>,
> > > > + <GIC_SPI 214
> > > > IRQ_TYPE_LEVEL_HIGH>,
> > > > + <GIC_SPI 215
> > > > IRQ_TYPE_LEVEL_HIGH>,
> > > > + <GIC_SPI 216
> > > > IRQ_TYPE_LEVEL_HIGH>;
> > > > + memory-region = <&wmcpu_emi>;
> > > > + };
> > > > };
> > > >
> > > > };
> > > > diff --git a/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
> > > > b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
> > > > index 0f49d57..7f21b10 100644
> > > > --- a/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
> > > > +++ b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
> > > > @@ -98,3 +98,46 @@ fixed-link {
> > > > };
> > > > };
> > > > };
> > > > +
> > > > +&wifi {
> > > > + status = "okay";
> > > > + pinctrl-names = "default", "dbdc";
> > > > + pinctrl-0 = <&wf_2g_5g_pins>;
> > > > + pinctrl-1 = <&wf_dbdc_pins>;
> > > > +};
> > > > +
> > > > +&pio {
> > > > + wf_2g_5g_pins: wf-2g-5g-pins {
> > > > + mux {
> > > > + function = "wifi";
> > > > + groups = "wf_2g", "wf_5g";
> > > > + };
> > > > + conf {
> > > > + pins = "WF0_HB1", "WF0_HB2", "WF0_HB3",
> > > > "WF0_HB4",
> > > > + "WF0_HB0", "WF0_HB0_B",
> > > > "WF0_HB5",
> > > > "WF0_HB6",
> > > > + "WF0_HB7", "WF0_HB8", "WF0_HB9",
> > > > "WF0_HB10",
> > > > + "WF0_TOP_CLK", "WF0_TOP_DATA",
> > > > "WF1_HB1",
> > > > + "WF1_HB2", "WF1_HB3", "WF1_HB4",
> > > > "WF1_HB0",
> > > > + "WF1_HB5", "WF1_HB6", "WF1_HB7",
> > > > "WF1_HB8",
> > > > + "WF1_TOP_CLK", "WF1_TOP_DATA";
> > > > + drive-strength = <4>;
> > > > + };
> > > > + };
> > > > +
> > > > + wf_dbdc_pins: wf-dbdc-pins {
> > > > + mux {
> > > > + function = "wifi";
> > > > + groups = "wf_dbdc";
> > > > + };
> > > > + conf {
> > > > + pins = "WF0_HB1", "WF0_HB2", "WF0_HB3",
> > > > "WF0_HB4",
> > > > + "WF0_HB0", "WF0_HB0_B",
> > > > "WF0_HB5",
> > > > "WF0_HB6",
> > > > + "WF0_HB7", "WF0_HB8", "WF0_HB9",
> > > > "WF0_HB10",
> > > > + "WF0_TOP_CLK", "WF0_TOP_DATA",
> > > > "WF1_HB1",
> > > > + "WF1_HB2", "WF1_HB3", "WF1_HB4",
> > > > "WF1_HB0",
> > > > + "WF1_HB5", "WF1_HB6", "WF1_HB7",
> > > > "WF1_HB8",
> > > > + "WF1_TOP_CLK", "WF1_TOP_DATA";
> > > > + drive-strength = <4>;
> > > > + };
> > > > + };
> > > > +};
Powered by blists - more mailing lists