| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <f05f2c68-70cf-60b7-49a9-f531f329de5c@loongson.cn>
Date: Sat, 3 Sep 2022 14:48:41 +0800
From: YanTeng Si <siyanteng@...ngson.cn>
To: William Breathitt Gray <william.gray@...aro.org>,
linux-iio@...r.kernel.org
Cc: linux-kernel@...r.kernel.org
Subject: Re: [PATCH] counter: Realign counter_comp comment block to 80
characters
在 2022/9/2 20:08, William Breathitt Gray 写道:
> The member documentation comment lines for struct counter_comp extend
> past the 80-characters column boundary due to extra identation at the
> start of each section. This patch realigns the comment block within the
> 80-characters boundary by removing these superfluous indents.
>
> Cc: Yanteng Si <siyanteng@...ngson.cn>
> Signed-off-by: William Breathitt Gray <william.gray@...aro.org>
Reviewed-by: Yanteng Si <siyanteng@...ngson.cn>
> ---
> include/linux/counter.h | 40 ++++++++++++++++++++--------------------
> 1 file changed, 20 insertions(+), 20 deletions(-)
>
> diff --git a/include/linux/counter.h b/include/linux/counter.h
> index 1fe17f5adb09..a81234bc8ea8 100644
> --- a/include/linux/counter.h
> +++ b/include/linux/counter.h
> @@ -38,64 +38,64 @@ enum counter_comp_type {
> * @type: Counter component data type
> * @name: device-specific component name
> * @priv: component-relevant data
> - * @action_read: Synapse action mode read callback. The read value of the
> + * @action_read: Synapse action mode read callback. The read value of the
> * respective Synapse action mode should be passed back via
> * the action parameter.
> - * @device_u8_read: Device u8 component read callback. The read value of the
> + * @device_u8_read: Device u8 component read callback. The read value of the
> * respective Device u8 component should be passed back via
> * the val parameter.
> - * @count_u8_read: Count u8 component read callback. The read value of the
> + * @count_u8_read: Count u8 component read callback. The read value of the
> * respective Count u8 component should be passed back via
> * the val parameter.
> - * @signal_u8_read: Signal u8 component read callback. The read value of the
> + * @signal_u8_read: Signal u8 component read callback. The read value of the
> * respective Signal u8 component should be passed back via
> * the val parameter.
> - * @device_u32_read: Device u32 component read callback. The read value of
> + * @device_u32_read: Device u32 component read callback. The read value of
> * the respective Device u32 component should be passed
> * back via the val parameter.
> - * @count_u32_read: Count u32 component read callback. The read value of the
> + * @count_u32_read: Count u32 component read callback. The read value of the
> * respective Count u32 component should be passed back via
> * the val parameter.
> - * @signal_u32_read: Signal u32 component read callback. The read value of
> + * @signal_u32_read: Signal u32 component read callback. The read value of
> * the respective Signal u32 component should be passed
> * back via the val parameter.
> - * @device_u64_read: Device u64 component read callback. The read value of
> + * @device_u64_read: Device u64 component read callback. The read value of
> * the respective Device u64 component should be passed
> * back via the val parameter.
> - * @count_u64_read: Count u64 component read callback. The read value of the
> + * @count_u64_read: Count u64 component read callback. The read value of the
> * respective Count u64 component should be passed back via
> * the val parameter.
> - * @signal_u64_read: Signal u64 component read callback. The read value of
> + * @signal_u64_read: Signal u64 component read callback. The read value of
> * the respective Signal u64 component should be passed
> * back via the val parameter.
> - * @action_write: Synapse action mode write callback. The write value of
> + * @action_write: Synapse action mode write callback. The write value of
> * the respective Synapse action mode is passed via the
> * action parameter.
> - * @device_u8_write: Device u8 component write callback. The write value of
> + * @device_u8_write: Device u8 component write callback. The write value of
> * the respective Device u8 component is passed via the val
> * parameter.
> - * @count_u8_write: Count u8 component write callback. The write value of
> + * @count_u8_write: Count u8 component write callback. The write value of
> * the respective Count u8 component is passed via the val
> * parameter.
> - * @signal_u8_write: Signal u8 component write callback. The write value of
> + * @signal_u8_write: Signal u8 component write callback. The write value of
> * the respective Signal u8 component is passed via the val
> * parameter.
> - * @device_u32_write: Device u32 component write callback. The write value of
> + * @device_u32_write: Device u32 component write callback. The write value of
> * the respective Device u32 component is passed via the
> * val parameter.
> - * @count_u32_write: Count u32 component write callback. The write value of
> + * @count_u32_write: Count u32 component write callback. The write value of
> * the respective Count u32 component is passed via the val
> * parameter.
> - * @signal_u32_write: Signal u32 component write callback. The write value of
> + * @signal_u32_write: Signal u32 component write callback. The write value of
> * the respective Signal u32 component is passed via the
> * val parameter.
> - * @device_u64_write: Device u64 component write callback. The write value of
> + * @device_u64_write: Device u64 component write callback. The write value of
> * the respective Device u64 component is passed via the
> * val parameter.
> - * @count_u64_write: Count u64 component write callback. The write value of
> + * @count_u64_write: Count u64 component write callback. The write value of
> * the respective Count u64 component is passed via the val
> * parameter.
> - * @signal_u64_write: Signal u64 component write callback. The write value of
> + * @signal_u64_write: Signal u64 component write callback. The write value of
> * the respective Signal u64 component is passed via the
> * val parameter.
> */
>
> base-commit: a12224997bec72d231a8dd642876e6364decdc45
Powered by blists - more mailing lists