| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <0583bec6-3bcd-b4b5-910e-bb82ec72028e@somainline.org>
Date: Sat, 3 Sep 2022 21:46:21 +0200
From: Konrad Dybcio <konrad.dybcio@...ainline.org>
To: Iskren Chernev <iskren.chernev@...il.com>,
Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Rob Herring <robh+dt@...nel.org>
Cc: phone-devel@...r.kernel.org, ~postmarketos/upstreaming@...ts.sr.ht,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
Andy Gross <agross@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 7/9] arm64: dts: qcom: sm6115: Add basic soc dtsi
On 3.09.2022 19:41, Iskren Chernev wrote:
> Add support for Qualcomm SM6115 SoC. This includes:
> - GCC
> - Pinctrl
> - RPM (CC+PD)
> - USB
> - MMC
> - UFS
>
> Signed-off-by: Iskren Chernev <iskren.chernev@...il.com>
> ---
> Remaining issues from make dtbs_check:
> - qcom,glink-rpm -- this is still in a txt file
> - rpm-requests: qcom,glink-channels -- according to txt file, it is allowed
> property
> - pinctrl -- the existing bindings should support both simple (single pin)
> and multi-block pinctr blocks (this commit contains multi-block only).
> However it doesn't work. This block needs to be revisited:
>
> #PIN CONFIGURATION NODES
> patternProperties:
> '-state$':
> oneOf:
> - $ref: "#/$defs/qcom-sm6115-tlmm-state"
> - patternProperties:
> ".*":
> $ref: "#/$defs/qcom-sm6115-tlmm-state"
>
> - ufs phy: binding complains about missing #clock and #phy -cells. The
> outer binding is never used as a clock or a phy (via reference), and
> I don't think it will be. Also none of the other ufs phy dts files has
> those props
> - usb: according to schema, there should be 4 interrupts, but some have
> 2 (like sm6115), and some have none. I see no such interrupts on DS. Are
> they defined elsewhere?
>
> arch/arm64/boot/dts/qcom/sm6115.dtsi | 904 +++++++++++++++++++++++++++
> 1 file changed, 904 insertions(+)
> create mode 100644 arch/arm64/boot/dts/qcom/sm6115.dtsi
>
> diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> new file mode 100644
> index 000000000000..a1a5dc24e4db
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> @@ -0,0 +1,904 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2021, Iskren Chernev <iskren.chernev@...il.com>
> + */
> +
> +#include <dt-bindings/clock/qcom,gcc-sm6115.h>
> +#include <dt-bindings/clock/qcom,rpmcc.h>
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/power/qcom-rpmpd.h>
> +
> +/ {
> + interrupt-parent = <&intc>;
> +
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + chosen { };
> +
> + clocks {
> + xo_board: xo-board {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-output-names = "xo_board";
Not sure if it's necessary given you pass these to clock controllers explicitly anyway.
> + };
> +
> + sleep_clk: sleep-clk {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-output-names = "sleep_clk";
> + };
> + };
> +
> + cpus {
> + #address-cells = <2>;
> + #size-cells = <0>;
> +
> + CPU0: cpu@0 {
> + device_type = "cpu";
> + compatible = "qcom,kryo260";
> + reg = <0x0 0x0>;
> + capacity-dmips-mhz = <1024>;
> + dynamic-power-coefficient = <100>;
> + enable-method = "psci";
> + next-level-cache = <&L2_0>;
> + L2_0: l2-cache {
> + compatible = "cache";
> + cache-level = <2>;
> + };
> + };
> +
> + CPU1: cpu@1 {
> + device_type = "cpu";
> + compatible = "qcom,kryo260";
> + reg = <0x0 0x1>;
> + capacity-dmips-mhz = <1024>;
> + dynamic-power-coefficient = <100>;
> + enable-method = "psci";
> + next-level-cache = <&L2_0>;
> + };
> +
> + CPU2: cpu@2 {
> + device_type = "cpu";
> + compatible = "qcom,kryo260";
> + reg = <0x0 0x2>;
> + capacity-dmips-mhz = <1024>;
> + dynamic-power-coefficient = <100>;
> + enable-method = "psci";
> + next-level-cache = <&L2_0>;
> + };
> +
> + CPU3: cpu@3 {
> + device_type = "cpu";
> + compatible = "qcom,kryo260";
> + reg = <0x0 0x3>;
> + capacity-dmips-mhz = <1024>;
> + dynamic-power-coefficient = <100>;
> + enable-method = "psci";
> + next-level-cache = <&L2_0>;
> + };
> +
> + CPU4: cpu@100 {
> + device_type = "cpu";
> + compatible = "qcom,kryo260";
> + reg = <0x0 0x100>;
> + enable-method = "psci";
> + capacity-dmips-mhz = <1638>;
> + dynamic-power-coefficient = <282>;
> + next-level-cache = <&L2_1>;
> + L2_1: l2-cache {
> + compatible = "cache";
> + cache-level = <2>;
> + };
> + };
> +
> + CPU5: cpu@101 {
> + device_type = "cpu";
> + compatible = "qcom,kryo260";
> + reg = <0x0 0x101>;
> + capacity-dmips-mhz = <1638>;
> + dynamic-power-coefficient = <282>;
> + enable-method = "psci";
> + next-level-cache = <&L2_1>;
> + };
> +
> + CPU6: cpu@102 {
> + device_type = "cpu";
> + compatible = "qcom,kryo260";
> + reg = <0x0 0x102>;
> + capacity-dmips-mhz = <1638>;
> + dynamic-power-coefficient = <282>;
> + enable-method = "psci";
> + next-level-cache = <&L2_1>;
> + };
> +
> + CPU7: cpu@103 {
> + device_type = "cpu";
> + compatible = "qcom,kryo260";
> + reg = <0x0 0x103>;
> + capacity-dmips-mhz = <1638>;
> + dynamic-power-coefficient = <282>;
> + enable-method = "psci";
> + next-level-cache = <&L2_1>;
> + };
> +
> + cpu-map {
> + cluster0 {
> + core0 {
> + cpu = <&CPU0>;
> + };
> +
> + core1 {
> + cpu = <&CPU1>;
> + };
> +
> + core2 {
> + cpu = <&CPU2>;
> + };
> +
> + core3 {
> + cpu = <&CPU3>;
> + };
> + };
> +
> + cluster1 {
> + core0 {
> + cpu = <&CPU4>;
> + };
> +
> + core1 {
> + cpu = <&CPU5>;
> + };
> +
> + core2 {
> + cpu = <&CPU6>;
> + };
> +
> + core3 {
> + cpu = <&CPU7>;
> + };
> + };
> + };
> + };
> +
> + firmware {
> + scm: scm {
> + compatible = "qcom,scm-sm6115", "qcom,scm";
> + #reset-cells = <1>;
> + };
> + };
> +
> + memory@...00000 {
> + device_type = "memory";
> + /* We expect the bootloader to fill in the size */
> + reg = <0 0x80000000 0 0>;
> + };
> +
> + pmu {
> + compatible = "arm,armv8-pmuv3";
> + interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + psci {
> + compatible = "arm,psci-1.0";
> + method = "smc";
> + };
> +
> + reserved-memory {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + hyp_mem: memory@...00000 {
> + reg = <0x0 0x45700000 0x0 0x600000>;
> + no-map;
> + };
> +
> + xbl_aop_mem: memory@...00000 {
> + reg = <0x0 0x45e00000 0x0 0x140000>;
> + no-map;
> + };
> +
> + sec_apps_mem: memory@...ff000 {
> + reg = <0x0 0x45fff000 0x0 0x1000>;
> + no-map;
> + };
> +
> + smem_mem: memory@...00000 {
> + reg = <0x0 0x46000000 0x0 0x200000>;
> + no-map;
> + };
> +
> + cdsp_sec_mem: memory@...00000 {
> + reg = <0x0 0x46200000 0x0 0x1e00000>;
> + no-map;
> + };
> +
> + pil_modem_mem: memory@...00000 {
> + reg = <0x0 0x4ab00000 0x0 0x6900000>;
> + no-map;
> + };
> +
> + pil_video_mem: memory@...00000 {
> + reg = <0x0 0x51400000 0x0 0x500000>;
> + no-map;
> + };
> +
> + wlan_msa_mem: memory@...00000 {
> + reg = <0x0 0x51900000 0x0 0x100000>;
> + no-map;
> + };
> +
> + pil_cdsp_mem: memory@...00000 {
> + reg = <0x0 0x51a00000 0x0 0x1e00000>;
> + no-map;
> + };
> +
> + pil_adsp_mem: memory@...00000 {
> + reg = <0x0 0x53800000 0x0 0x2800000>;
> + no-map;
> + };
> +
> + pil_ipa_fw_mem: memory@...00000 {
> + reg = <0x0 0x56100000 0x0 0x10000>;
> + no-map;
> + };
> +
> + pil_ipa_gsi_mem: memory@...10000 {
> + reg = <0x0 0x56110000 0x0 0x5000>;
> + no-map;
> + };
> +
> + pil_gpu_mem: memory@...15000 {
> + reg = <0x0 0x56115000 0x0 0x2000>;
> + no-map;
> + };
> +
> + cont_splash_memory: memory@...00000 {
> + reg = <0x0 0x5c000000 0x0 0x00f00000>;
> + no-map;
> + };
> +
> + dfps_data_memory: memory@...00000 {
> + reg = <0x0 0x5cf00000 0x0 0x0100000>;
> + no-map;
> + };
> +
> + removed_mem: memory@...00000 {
> + reg = <0x0 0x60000000 0x0 0x3900000>;
> + no-map;
> + };
> +
> + secure_display_memory: memory@...00000 {
> + reg = <0x0 0xf3c00000 0x0 0x5c00000>;
> + no-map;
> + };
> +
> + dump_mem: memory@...00000 {
> + reg = <0x0 0xf9800000 0x0 0x800000>;
> + no-map;
> + };
> +
> + adsp_mem: memory@...00000 {
> + reg = <0x0 0xfa000000 0x0 0x800000>;
> + no-map;
> + };
> +
> + qseecom_mem: memory@...00000 {
> + reg = <0x0 0xfa800000 0x0 0x1400000>;
> + no-map;
> + };
> +
> + user_contig_mem: memory@...00000 {
> + reg = <0x0 0xfbc00000 0x0 0x1000000>;
Pretty sure this and linux_cma_mem don't need to be reserved at a precise
location.. I might be wrong, though..
> + no-map;
> + };
> +
> + qseecom_ta_mem: memory@...00000 {
> + reg = <0x0 0xfcc00000 0x0 0x1000000>;
> + no-map;
> + };
> +
> + linux_cma_mem: memory@...00000 {
> + reg = <0x0 0xfdc00000 0x0 0x2000000>;
> + no-map;
> + };
> +
> + };
> +
> + rpm-glink {
> + compatible = "qcom,glink-rpm";
> +
> + interrupts = <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>;
> + qcom,rpm-msg-ram = <&rpm_msg_ram>;
> + mboxes = <&apcs_glb 0>;
> +
> + rpm_requests: rpm-requests {
> + compatible = "qcom,rpm-sm6115";
> + qcom,glink-channels = "rpm_requests";
> +
> + rpmcc: clock-controller {
> + compatible = "qcom,rpmcc-sm6115", "qcom,rpmcc";
> + #clock-cells = <1>;
> + };
> +
> + rpmpd: power-controller {
> + compatible = "qcom,sm6115-rpmpd";
> + #power-domain-cells = <1>;
> + operating-points-v2 = <&rpmpd_opp_table>;
> +
> + rpmpd_opp_table: opp-table {
> + compatible = "operating-points-v2";
> +
> + rpmpd_opp_min_svs: opp1 {
> + opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
> + };
> +
> + rpmpd_opp_low_svs: opp2 {
> + opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
> + };
> +
> + rpmpd_opp_svs: opp3 {
> + opp-level = <RPM_SMD_LEVEL_SVS>;
> + };
> +
> + rpmpd_opp_svs_plus: opp4 {
> + opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
> + };
> +
> + rpmpd_opp_nom: opp5 {
> + opp-level = <RPM_SMD_LEVEL_NOM>;
> + };
> +
> + rpmpd_opp_nom_plus: opp6 {
> + opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
> + };
> +
> + rpmpd_opp_turbo: opp7 {
> + opp-level = <RPM_SMD_LEVEL_TURBO>;
> + };
> +
> + rpmpd_opp_turbo_plus: opp8 {
> + opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>;
> + };
> + };
> + };
> + };
> + };
> +
> + smem {
> + compatible = "qcom,smem";
> + memory-region = <&smem_mem>;
> + qcom,rpm-msg-ram = <&rpm_msg_ram>;
> + hwlocks = <&tcsr_mutex 3>;
> + };
> +
> + soc: soc {
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0 0 0 0xffffffff>;
> +
> + tlmm: pinctrl@...000 {
> + compatible = "qcom,sm6115-tlmm";
> + reg = <0x500000 0x400000>,
> + <0x900000 0x400000>,
Bad indentation.
> + <0xd00000 0x400000>;
> + reg-names = "west", "south", "east";
> + interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + gpio-ranges = <&tlmm 0 0 121>;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> +
> + sdc1_state_on: sdc1-on-state {
> + clk {
> + pins = "sdc1_clk";
> + bias-disable;
> + drive-strength = <16>;
> + };
> +
> + cmd {
> + pins = "sdc1_cmd";
> + bias-pull-up;
> + drive-strength = <10>;
> + };
> +
> + data {
> + pins = "sdc1_data";
> + bias-pull-up;
> + drive-strength = <10>;
> + };
> +
> + rclk {
> + pins = "sdc1_rclk";
> + bias-pull-down;
> + };
> + };
> +
> + sdc1_state_off: sdc1-off-state {
> + clk {
> + pins = "sdc1_clk";
> + bias-disable;
> + drive-strength = <2>;
> + };
> +
> + cmd {
> + pins = "sdc1_cmd";
> + bias-pull-up;
> + drive-strength = <2>;
> + };
> +
> + data {
> + pins = "sdc1_data";
> + bias-pull-up;
> + drive-strength = <2>;
> + };
> +
> + rclk {
> + pins = "sdc1_rclk";
> + bias-pull-down;
> + };
> + };
> +
> + sdc2_state_on: sdc2-on-state {
> + clk {
> + pins = "sdc2_clk";
> + bias-disable;
> + drive-strength = <16>;
> + };
> +
> + cmd {
> + pins = "sdc2_cmd";
> + bias-pull-up;
> + drive-strength = <10>;
> + };
> +
> + data {
> + pins = "sdc2_data";
> + bias-pull-up;
> + drive-strength = <10>;
> + };
> +
> + sd-cd {
> + pins = "gpio88";
> + function = "gpio";
> + bias-pull-up;
> + drive-strength = <2>;
> + };
> + };
> +
> + sdc2_state_off: sdc2-off-state {
> + clk {
> + pins = "sdc2_clk";
> + bias-disable;
> + drive-strength = <2>;
> + };
> +
> + cmd {
> + pins = "sdc2_cmd";
> + bias-pull-up;
> + drive-strength = <2>;
> + };
> +
> + data {
> + pins = "sdc2_data";
> + bias-pull-up;
> + drive-strength = <2>;
> + };
> +
> + sd-cd {
> + pins = "gpio88";
> + function = "gpio";
> + bias-disable;
> + drive-strength = <2>;
> + };
> + };
> + };
> +
> + gcc: clock-controller@...0000 {
> + compatible = "qcom,gcc-sm6115";
> + reg = <0x1400000 0x1f0000>;
> + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>;
> + clock-names = "bi_tcxo", "sleep_clk";
> + #clock-cells = <1>;
> + #reset-cells = <1>;
> + #power-domain-cells = <1>;
> + };
> +
> + hsusb_phy: phy@...3000 {
> + compatible = "qcom,sm6115-qusb2-phy";
> + reg = <0x1613000 0x180>;
> + #phy-cells = <0>;
> +
> + clocks = <&gcc GCC_AHB2PHY_USB_CLK>,
> + <&rpmcc RPM_SMD_XO_CLK_SRC>;
> + clock-names = "cfg_ahb", "ref";
> +
> + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
> + nvmem-cells = <&qusb2_hstx_trim>;
> +
> + status = "disabled";
> + };
> +
> + qfprom@...0000 {
> + compatible = "qcom,sm6115-qfprom", "qcom,qfprom";
> + reg = <0x1b40000 0x7000>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + qusb2_hstx_trim: hstx-trim@25b {
> + reg = <0x25b 0x1>;
> + bits = <1 4>;
> + };
> + };
> +
> + spmi_bus: spmi@...0000 {
> + compatible = "qcom,spmi-pmic-arb";
> + reg = <0x1c40000 0x1100>,
> + <0x1e00000 0x2000000>,
> + <0x3e00000 0x100000>,
> + <0x3f00000 0xa0000>,
> + <0x1c0a000 0x26000>;
> + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
> + interrupt-names = "periph_irq";
> + interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
> + qcom,ee = <0>;
> + qcom,channel = <0>;
> + #address-cells = <2>;
> + #size-cells = <0>;
> + interrupt-controller;
> + #interrupt-cells = <4>;
> + };
> +
> + tcsr_mutex: hwlock@...0000 {
> + compatible = "qcom,tcsr-mutex";
> + reg = <0x340000 0x20000>;
> + #hwlock-cells = <1>;
> + };
> +
> + rpm_msg_ram: sram@...0000 {
> + compatible = "qcom,rpm-msg-ram";
> + reg = <0x45f0000 0x7000>;
> + };
> +
> + sdhc_1: mmc@...4000 {
> + compatible = "qcom,sm6115-sdhci", "qcom,sdhci-msm-v5";
> + reg = <0x4744000 0x1000>, <0x4745000 0x1000>, <0x4748000 0x8000>;
> + reg-names = "hc", "cqhci", "ice";
> +
> + interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
Bad indentation.
> + interrupt-names = "hc_irq", "pwr_irq";
> +
> + clocks = <&gcc GCC_SDCC1_AHB_CLK>,
> + <&gcc GCC_SDCC1_APPS_CLK>,
> + <&xo_board>,
> + <&gcc GCC_SDCC1_ICE_CORE_CLK>;
> + clock-names = "iface", "core", "xo", "ice";
> +
> + pinctrl-0 = <&sdc1_state_on>, <&sdc1_state_off>;
> + pinctrl-names = "default", "sleep";
> +
> + bus-width = <8>;
> + status = "disabled";
> + };
> +
> + sdhc_2: mmc@...4000 {
> + compatible = "qcom,sm6115-sdhci", "qcom,sdhci-msm-v5";
> + reg = <0x04784000 0x1000>;
> + reg-names = "hc";
> +
> + interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
Bad indentation.
> + interrupt-names = "hc_irq", "pwr_irq";
> +
> + clocks = <&gcc GCC_SDCC2_AHB_CLK>,
> + <&gcc GCC_SDCC2_APPS_CLK>,
> + <&xo_board>;
> + clock-names = "iface", "core", "xo";
> +
> + pinctrl-0 = <&sdc2_state_on>, <&sdc2_state_off>;
> + pinctrl-names = "default", "sleep";
> +
> + power-domains = <&rpmpd SM6115_VDDCX>;
> + operating-points-v2 = <&sdhc2_opp_table>;
> + iommus = <&apps_smmu 0x00a0 0x0>;
> + resets = <&gcc GCC_SDCC2_BCR>;
> +
> + bus-width = <4>;
> + qcom,dll-config = <0x0007642c>;
> + qcom,ddr-config = <0x80040868>;
> + status = "disabled";
> +
> + sdhc2_opp_table: opp-table {
> + compatible = "operating-points-v2";
> +
> + opp-100000000 {
> + opp-hz = /bits/ 64 <100000000>;
> + required-opps = <&rpmpd_opp_low_svs>;
> + };
> +
> + opp-202000000 {
> + opp-hz = /bits/ 64 <202000000>;
> + required-opps = <&rpmpd_opp_nom>;
> + };
> + };
> + };
> +
> + ufs_mem_hc: ufs@...4000 {
> + compatible = "qcom,sm6115-ufshc", "qcom,ufshc",
> + "jedec,ufs-2.0";
Wouldn't this fit in a single, 100char line?
> + reg = <0x4804000 0x3000>, <0x4810000 0x8000>;
> + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
> + phys = <&ufs_mem_phy_lanes>;
> + phy-names = "ufsphy";
> + lanes-per-direction = <1>;
> + #reset-cells = <1>;
> + resets = <&gcc GCC_UFS_PHY_BCR>;
> + reset-names = "rst";
> +
> + power-domains = <&gcc GCC_UFS_PHY_GDSC>;
> + iommus = <&apps_smmu 0x100 0>;
> +
> + clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
> + <&gcc GCC_SYS_NOC_UFS_PHY_AXI_CLK>,
> + <&gcc GCC_UFS_PHY_AHB_CLK>,
> + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
> + <&gcc GCC_UFS_PHY_ICE_CORE_CLK>,
> + <&rpmcc RPM_SMD_XO_CLK_SRC>,
> + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
> + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>;
> + clock-names = "core_clk",
> + "bus_aggr_clk",
> + "iface_clk",
> + "core_clk_unipro",
> + "core_clk_ice",
> + "ref_clk",
> + "tx_lane0_sync_clk",
> + "rx_lane0_sync_clk";
> +
> + freq-table-hz = <50000000 200000000>,
> + <0 0>,
> + <0 0>,
> + <37500000 150000000>,
> + <75000000 300000000>,
> + <0 0>,
> + <0 0>,
> + <0 0>;
> +
> + status = "disabled";
> + };
> +
> + ufs_mem_phy: phy@...7000 {
> + compatible = "qcom,sm6115-qmp-ufs-phy";
> + reg = <0x4807000 0x1c4>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + clocks = <&gcc GCC_UFS_CLKREF_CLK>,
> + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
> + clock-names = "ref", "ref_aux";
> +
> + resets = <&ufs_mem_hc 0>;
> + reset-names = "ufsphy";
> + status = "disabled";
> +
> + ufs_mem_phy_lanes: phy@...7400 {
> + reg = <0x4807400 0x098>,
> + <0x4807600 0x130>,
> + <0x4807c00 0x16c>;
> + #phy-cells = <0>;
> + };
> + };
> +
> + usb3: usb@...8800 {
> + compatible = "qcom,sm6115-dwc3", "qcom,dwc3";
> + reg = <0x04ef8800 0x400>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
> + <&gcc GCC_USB30_PRIM_MASTER_CLK>,
> + <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>,
> + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
> + <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
> + <&gcc GCC_USB3_PRIM_CLKREF_CLK>;
> + clock-names = "cfg_noc", "core", "iface", "mock_utmi",
> + "sleep", "xo";
> +
> + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
> + <&gcc GCC_USB30_PRIM_MASTER_CLK>;
> + assigned-clock-rates = <19200000>, <66666667>;
> +
> + interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "hs_phy_irq", "ss_phy_irq";
> +
> + resets = <&gcc GCC_USB30_PRIM_BCR>;
> + power-domains = <&gcc GCC_USB30_PRIM_GDSC>;
> + qcom,select-utmi-as-pipe-clk;
> + status = "disabled";
> +
> + usb3_dwc3: usb@...0000 {
> + compatible = "snps,dwc3";
> + reg = <0x04e00000 0xcd00>;
> + interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
> + phys = <&hsusb_phy>;
> + phy-names = "usb2-phy";
> + iommus = <&apps_smmu 0x120 0x0>;
> + snps,dis_u2_susphy_quirk;
> + snps,dis_enblslpm_quirk;
> + snps,has-lpm-erratum;
> + snps,hird-threshold = /bits/ 8 <0x10>;
> + snps,usb3_lpm_capable;
> + maximum-speed = "high-speed";
> + dr_mode = "peripheral";
> + };
> + };
> +
> + apps_smmu: iommu@...0000 {
> + compatible = "qcom,sm6115-smmu-500", "arm,mmu-500";
> + reg = <0xc600000 0x80000>;
> + #iommu-cells = <2>;
> + #global-interrupts = <1>;
> +
> + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + apcs_glb: mailbox@...1000 {
> + compatible = "qcom,sm6115-apcs-hmss-global";
> + reg = <0xf111000 0x1000>;
> +
> + #mbox-cells = <1>;
> + };
> +
> + timer@...0000 {
> + compatible = "arm,armv7-timer-mem";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> + reg = <0xf120000 0x1000>;
> + clock-frequency = <19200000>;
> +
> + frame@...1000 {
> + frame-number = <0>;
> + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0xf121000 0x1000>,
> + <0xf122000 0x1000>;
> + };
> +
> + frame@...3000 {
> + frame-number = <1>;
> + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0xf123000 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@...4000 {
> + frame-number = <2>;
> + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0xf124000 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@...5000 {
> + frame-number = <3>;
> + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0xf125000 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@...6000 {
> + frame-number = <4>;
> + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0xf126000 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@...7000 {
> + frame-number = <5>;
> + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0xf127000 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@...8000 {
> + frame-number = <6>;
> + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0xf128000 0x1000>;
> + status = "disabled";
> + };
> + };
> +
> + intc: interrupt-controller@...0000 {
> + compatible = "arm,gic-v3";
> + #interrupt-cells = <3>;
> + interrupt-controller;
> + interrupt-parent = <&intc>;
> + #redistributor-regions = <1>;
> + redistributor-stride = <0x0 0x20000>;
> + reg = <0xf200000 0x10000>,
> + <0xf300000 0x100000>;
Compatible first, reg second.
> + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> + };
> + };
> +
> + timer {
> + compatible = "arm,armv8-timer";
> + interrupts = <GIC_PPI 1 0xf08>,
> + <GIC_PPI 2 0xf08>,
> + <GIC_PPI 3 0xf08>,
> + <GIC_PPI 0 0xf08>;
> + clock-frequency = <19200000>;
Remove clock-frequency if the platform boots without it.
Konrad
> + };
> +};
Powered by blists - more mailing lists