| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20220904165145.39cb4f75@jic23-huawei>
Date: Sun, 4 Sep 2022 16:51:45 +0100
From: Jonathan Cameron <jic23@...nel.org>
To: Ramona Bolboaca <ramona.bolboaca@...log.com>
Cc: <robh+dt@...nel.org>, <krzysztof.kozlowski+dt@...aro.org>,
<linux-iio@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v2 2/2] iio: adc: add max11205 adc driver
On Sun, 4 Sep 2022 16:50:03 +0100
Jonathan Cameron <jic23@...nel.org> wrote:
> On Wed, 31 Aug 2022 16:30:21 +0300
> Ramona Bolboaca <ramona.bolboaca@...log.com> wrote:
>
> > Adding support for max11205 16-bit single-channel ultra-low power
> > delta-sigma adc.
> > The MAX11205 is compatible with the 2-wire interface and uses
> > SCLK and RDY/DOUT for serial communications. In this mode, all
> > controls are implemented by timing the high or low phase of the SCLK.
> > The 2-wire serial interface only allows for data to be read out through
> > the RDY/DOUT output.
> >
> > Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX11205.pdf
> > Signed-off-by: Ramona Bolboaca <ramona.bolboaca@...log.com>
>
> Given the requested changes below and those from Andy and Kryzstof are minor, I'll just
> tweak them whilst applying.
On that note, applied to the togreg branch of iio.git (with changes as noted)
and pushed out as testing for 0-day to see if it can find anything we missed.
Thanks,
Jonathan
>
> Diff for this patch was below. The long line for chip_info is a bit ugly but
> not too bad...
>
> diff --git a/drivers/iio/adc/max11205.c b/drivers/iio/adc/max11205.c
> index 68e6082e70e5..fc90fed81eb6 100644
> --- a/drivers/iio/adc/max11205.c
> +++ b/drivers/iio/adc/max11205.c
> @@ -1,6 +1,6 @@
> // SPDX-License-Identifier: GPL-2.0
> /*
> - * max11205 16-Bit Delta-Sigma ADC
> + * Maxim MAX11205 16-Bit Delta-Sigma ADC
> *
> * Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX1240-max11205.pdf
> * Copyright (C) 2022 Analog Devices, Inc.
> @@ -19,20 +19,20 @@
> #define MAX11205A_OUT_DATA_RATE 116
> #define MAX11205B_OUT_DATA_RATE 13
>
> -enum chip_type {
> +enum max11205_chip_type {
> TYPE_MAX11205A,
> TYPE_MAX11205B,
> };
>
> -struct chip_info {
> +struct max11205_chip_info {
> unsigned int out_data_rate;
> const char *name;
> };
>
> struct max11205_state {
> - const struct chip_info *chip_info;
> - struct regulator *vref;
> - struct ad_sigma_delta sd;
> + const struct max11205_chip_info *chip_info;
> + struct regulator *vref;
> + struct ad_sigma_delta sd;
> };
>
> static const struct ad_sigma_delta_info max11205_sigma_delta_info = {
> @@ -81,12 +81,12 @@ static const struct iio_chan_spec max11205_channels[] = {
> .endianness = IIO_BE
> },
> .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> - BIT(IIO_CHAN_INFO_SAMP_FREQ) |
> - BIT(IIO_CHAN_INFO_SCALE),
> + BIT(IIO_CHAN_INFO_SAMP_FREQ) |
> + BIT(IIO_CHAN_INFO_SCALE),
> },
> };
>
> -static const struct chip_info max11205_chip_info[] = {
> +static const struct max11205_chip_info max11205_chip_info[] = {
> [TYPE_MAX11205A] = {
> .out_data_rate = MAX11205A_OUT_DATA_RATE,
> .name = "max11205a",
> @@ -117,9 +117,9 @@ static int max11205_probe(struct spi_device *spi)
> ad_sd_init(&st->sd, indio_dev, spi, &max11205_sigma_delta_info);
>
> st->chip_info = device_get_match_data(&spi->dev);
> -
> if (!st->chip_info)
> - st->chip_info = (const struct chip_info *)spi_get_device_id(spi)->driver_data;
> + st->chip_info =
> + (const struct max11205_chip_info *)spi_get_device_id(spi)->driver_data;
>
> indio_dev->name = st->chip_info->name;
> indio_dev->modes = INDIO_DIRECT_MODE;
>
> > ---
> > changes in v2:
> > - add chip_info null pointer check
> > - add support for probing with ACPI table
> > - remove function for module removal
> > - remove irq flag from max11205_sigma_delta_info
> > - add missing commas and missing spaces
> > - remove redundant blank line
> > - wrap text to 75-80 chars
> > - removed typos in commit message
> > drivers/iio/adc/Kconfig | 14 +++
> > drivers/iio/adc/Makefile | 1 +
> > drivers/iio/adc/max11205.c | 183 +++++++++++++++++++++++++++++++++++++
> > 3 files changed, 198 insertions(+)
> > create mode 100644 drivers/iio/adc/max11205.c
> >
>
> > +enum chip_type {
> > + TYPE_MAX11205A,
> > + TYPE_MAX11205B,
> > +};
> > +
> > +struct chip_info {
> > + unsigned int out_data_rate;
> > + const char *name;
> > +};
> Prefix these enums and structures with max11205.
>
> They have very generic names, so it's definitely possible that
> something with the same name might be added to a header included
> by this driver
> > +
> > +struct max11205_state {
> > + const struct chip_info *chip_info;
> > + struct regulator *vref;
> > + struct ad_sigma_delta sd;
> > +};
> > +
>
>
> > +static const struct iio_chan_spec max11205_channels[] = {
> > + {
> > + .type = IIO_VOLTAGE,
> > + .indexed = 1,
> > + .scan_type = {
> > + .sign = 's',
> > + .realbits = 16,
> > + .storagebits = 16,
> > + .endianness = IIO_BE
> > + },
> > + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> > + BIT(IIO_CHAN_INFO_SAMP_FREQ) |
>
> Code editors always get confused on these, but please add an
> indent to this line and the next one. Either align it with the BIT()
> above, or just push it in one tab.
>
> > + BIT(IIO_CHAN_INFO_SCALE),
> > + },
> > +};
>
>
Powered by blists - more mailing lists