[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <eee9ab0f-a96f-2b92-1021-0c94492d5a55@redhat.com>
Date: Tue, 6 Sep 2022 00:02:06 +0200
From: Paolo Bonzini <pbonzini@...hat.com>
To: Sean Christopherson <seanjc@...gle.com>
Cc: kvm@...r.kernel.org, linux-kernel@...r.kernel.org,
Suravee Suthikulpanit <suravee.suthikulpanit@....com>,
Maxim Levitsky <mlevitsk@...hat.com>,
Li RongQing <lirongqing@...du.com>
Subject: Re: [PATCH v2 04/23] KVM: x86: Inhibit AVIC SPTEs if any vCPU enables
x2APIC
On 9/3/22 02:22, Sean Christopherson wrote:
> Reintroduce APICV_INHIBIT_REASON_X2APIC as a "partial" inhibit for AMD
> to fix a bug where the APIC access page is visible to vCPUs that have
> x2APIC enabled, i.e. shouldn't be able to "see" the xAPIC MMIO region.
>
> On AMD, due to its "hybrid" mode where AVIC is enabled when x2APIC is
> enabled even without x2AVIC support, the bug occurs any time AVIC is
> enabled as x2APIC is fully emulated by KVM. I.e. hardware isn't aware
> that the guest is operating in x2APIC mode.
>
> Opportunistically drop the "can" while updating avic_activate_vmcb()'s
> comment, i.e. to state that KVM _does_ support the hybrid mode. Move
> the "Note:" down a line to conform to preferred kernel/KVM multi-line
> comment style.
>
> Leave Intel as-is for now to avoid a subtle performance regression, even
> though Intel likely suffers from the same bug. On Intel, in theory the
> bug rears its head only when vCPUs share host page tables (extremely
> likely) and x2APIC enabling is not consistent within the guest, i.e. if
> some vCPUs have x2APIC enabled and other does do not (unlikely to occur
> except in certain situations, e.g. bringing up APs).
>
> Fixes: 0e311d33bfbe ("KVM: SVM: Introduce hybrid-AVIC mode")
> Cc: stable@...r.kernel.org
> Suggested-by: Maxim Levitsky <mlevitsk@...hat.com>
> Signed-off-by: Sean Christopherson <seanjc@...gle.com>
> ---
> arch/x86/include/asm/kvm_host.h | 10 ++++++++++
> arch/x86/kvm/lapic.c | 4 +++-
> arch/x86/kvm/mmu/mmu.c | 2 +-
> arch/x86/kvm/svm/avic.c | 15 +++++++-------
> arch/x86/kvm/x86.c | 35 +++++++++++++++++++++++++++++----
> 5 files changed, 53 insertions(+), 13 deletions(-)
>
> diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
> index 2c96c43c313a..1fd1b66ceeb6 100644
> --- a/arch/x86/include/asm/kvm_host.h
> +++ b/arch/x86/include/asm/kvm_host.h
> @@ -1132,6 +1132,15 @@ enum kvm_apicv_inhibit {
> * AVIC is disabled because SEV doesn't support it.
> */
> APICV_INHIBIT_REASON_SEV,
> +
> + /*
> + * Due to sharing page tables across vCPUs, the xAPIC memslot must be
> + * inhibited if any vCPU has x2APIC enabled. Note, this is a "partial"
> + * inhibit; APICv can still be activated, but KVM mustn't retain/create
> + * SPTEs for the APIC access page. Like the APIC ID and APIC base
> + * inhibits, this is sticky for simplicity.
> + */
> + APICV_INHIBIT_REASON_X2APIC,
> };
>
> struct kvm_arch {
> @@ -1903,6 +1912,7 @@ gpa_t kvm_mmu_gva_to_gpa_write(struct kvm_vcpu *vcpu, gva_t gva,
> gpa_t kvm_mmu_gva_to_gpa_system(struct kvm_vcpu *vcpu, gva_t gva,
> struct x86_exception *exception);
>
> +bool kvm_apicv_memslot_activated(struct kvm *kvm);
> bool kvm_apicv_activated(struct kvm *kvm);
> bool kvm_vcpu_apicv_activated(struct kvm_vcpu *vcpu);
> void kvm_vcpu_update_apicv(struct kvm_vcpu *vcpu);
> diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
> index 38e9b8e5278c..d956cd37908e 100644
> --- a/arch/x86/kvm/lapic.c
> +++ b/arch/x86/kvm/lapic.c
> @@ -2394,8 +2394,10 @@ void kvm_lapic_set_base(struct kvm_vcpu *vcpu, u64 value)
> }
> }
>
> - if (((old_value ^ value) & X2APIC_ENABLE) && (value & X2APIC_ENABLE))
> + if (((old_value ^ value) & X2APIC_ENABLE) && (value & X2APIC_ENABLE)) {
> kvm_apic_set_x2apic_id(apic, vcpu->vcpu_id);
> + kvm_set_apicv_inhibit(vcpu->kvm, APICV_INHIBIT_REASON_X2APIC);
> + }
>
> if ((old_value ^ value) & (MSR_IA32_APICBASE_ENABLE | X2APIC_ENABLE)) {
> kvm_vcpu_update_apicv(vcpu);
> diff --git a/arch/x86/kvm/mmu/mmu.c b/arch/x86/kvm/mmu/mmu.c
> index e418ef3ecfcb..cea25552869f 100644
> --- a/arch/x86/kvm/mmu/mmu.c
> +++ b/arch/x86/kvm/mmu/mmu.c
> @@ -4150,7 +4150,7 @@ static int kvm_faultin_pfn(struct kvm_vcpu *vcpu, struct kvm_page_fault *fault)
> * when the AVIC is re-enabled.
> */
> if (slot && slot->id == APIC_ACCESS_PAGE_PRIVATE_MEMSLOT &&
> - !kvm_apicv_activated(vcpu->kvm))
> + !kvm_apicv_memslot_activated(vcpu->kvm))
> return RET_PF_EMULATE;
> }
>
> diff --git a/arch/x86/kvm/svm/avic.c b/arch/x86/kvm/svm/avic.c
> index 6a3d225eb02c..19be5f1afaac 100644
> --- a/arch/x86/kvm/svm/avic.c
> +++ b/arch/x86/kvm/svm/avic.c
> @@ -72,12 +72,12 @@ static void avic_activate_vmcb(struct vcpu_svm *svm)
>
> vmcb->control.int_ctl |= AVIC_ENABLE_MASK;
>
> - /* Note:
> - * KVM can support hybrid-AVIC mode, where KVM emulates x2APIC
> - * MSR accesses, while interrupt injection to a running vCPU
> - * can be achieved using AVIC doorbell. The AVIC hardware still
> - * accelerate MMIO accesses, but this does not cause any harm
> - * as the guest is not supposed to access xAPIC mmio when uses x2APIC.
> + /*
> + * Note: KVM supports hybrid-AVIC mode, where KVM emulates x2APIC MSR
> + * accesses, while interrupt injection to a running vCPU can be
> + * achieved using AVIC doorbell. KVM disables the APIC access page
> + * (prevents mapping it into the guest) if any vCPU has x2APIC enabled,
> + * thus enabling AVIC activates only the doorbell mechanism.
> */
> if (apic_x2apic_mode(svm->vcpu.arch.apic) &&
> avic_mode == AVIC_MODE_X2) {
> @@ -1014,7 +1014,8 @@ bool avic_check_apicv_inhibit_reasons(enum kvm_apicv_inhibit reason)
> BIT(APICV_INHIBIT_REASON_BLOCKIRQ) |
> BIT(APICV_INHIBIT_REASON_SEV) |
> BIT(APICV_INHIBIT_REASON_APIC_ID_MODIFIED) |
> - BIT(APICV_INHIBIT_REASON_APIC_BASE_MODIFIED);
> + BIT(APICV_INHIBIT_REASON_APIC_BASE_MODIFIED) |
> + BIT(APICV_INHIBIT_REASON_X2APIC);
>
> return supported & BIT(reason);
> }
> diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
> index d7374d768296..6ab9088c2531 100644
> --- a/arch/x86/kvm/x86.c
> +++ b/arch/x86/kvm/x86.c
> @@ -9379,15 +9379,29 @@ static void kvm_pv_kick_cpu_op(struct kvm *kvm, int apicid)
> kvm_irq_delivery_to_apic(kvm, NULL, &lapic_irq, NULL);
> }
>
> -bool kvm_apicv_activated(struct kvm *kvm)
> +bool kvm_apicv_memslot_activated(struct kvm *kvm)
> {
> return (READ_ONCE(kvm->arch.apicv_inhibit_reasons) == 0);
> }
> +
> +static unsigned long kvm_apicv_get_inhibit_reasons(struct kvm *kvm)
> +{
> + /*
> + * x2APIC only needs to "inhibit" the MMIO region, all other aspects of
> + * APICv can continue to be utilized.
> + */
> + return READ_ONCE(kvm->arch.apicv_inhibit_reasons) & ~APICV_INHIBIT_REASON_X2APIC;
> +}
> +
> +bool kvm_apicv_activated(struct kvm *kvm)
> +{
> + return !kvm_apicv_get_inhibit_reasons(kvm);
> +}
> EXPORT_SYMBOL_GPL(kvm_apicv_activated);
>
> bool kvm_vcpu_apicv_activated(struct kvm_vcpu *vcpu)
> {
> - ulong vm_reasons = READ_ONCE(vcpu->kvm->arch.apicv_inhibit_reasons);
> + ulong vm_reasons = kvm_apicv_get_inhibit_reasons(vcpu->kvm);
> ulong vcpu_reasons = static_call(kvm_x86_vcpu_get_apicv_inhibit_reasons)(vcpu);
>
> return (vm_reasons | vcpu_reasons) == 0;
> @@ -10122,7 +10136,15 @@ void __kvm_set_or_clear_apicv_inhibit(struct kvm *kvm,
>
> set_or_clear_apicv_inhibit(&new, reason, set);
>
> - if (!!old != !!new) {
> + /*
> + * If the overall "is APICv activated" status is unchanged, simply add
> + * or remove the inihbit from the pile. x2APIC is an exception, as it
> + * is a partial inhibit (only blocks SPTEs for the APIC access page).
> + * If x2APIC is the only inhibit in either the old or the new set, then
> + * vCPUs need to be kicked to transition between partially-inhibited
> + * and fully-inhibited.
> + */
> + if ((!!old != !!new) || old == X2APIC_ENABLE || new == X2APIC_ENABLE) {
> /*
> * Kick all vCPUs before setting apicv_inhibit_reasons to avoid
> * false positives in the sanity check WARN in svm_vcpu_run().
> @@ -10137,7 +10159,12 @@ void __kvm_set_or_clear_apicv_inhibit(struct kvm *kvm,
> */
> kvm_make_all_cpus_request(kvm, KVM_REQ_APICV_UPDATE);
> kvm->arch.apicv_inhibit_reasons = new;
> - if (new) {
> +
> + /*
> + * Zap SPTEs for the APIC access page if APICv is newly
> + * inhibited (partially or fully).
> + */
> + if (new && !old) {
> unsigned long gfn = gpa_to_gfn(APIC_DEFAULT_PHYS_BASE);
> kvm_zap_gfn_range(kvm, gfn, gfn+1);
> }
Reviewed-by: Paolo Bonzini <pbonzini@...hat.com>
Powered by blists - more mailing lists