[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <7cec789d6d54f4bb85e9129d39a3da52e26293dd.camel@mediatek.com>
Date: Thu, 15 Sep 2022 16:32:31 +0800
From: Bo-Chen Chen <rex-bc.chen@...iatek.com>
To: AngeloGioacchino Del Regno
<angelogioacchino.delregno@...labora.com>,
"robh+dt@...nel.org" <robh+dt@...nel.org>,
"krzysztof.kozlowski+dt@...aro.org"
<krzysztof.kozlowski+dt@...aro.org>
CC: "matthias.bgg@...il.com" <matthias.bgg@...il.com>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"linux-mediatek@...ts.infradead.org"
<linux-mediatek@...ts.infradead.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Project_Global_Chrome_Upstream_Group
<Project_Global_Chrome_Upstream_Group@...iatek.com>
Subject: Re: [PATCH 1/4] arm64: dts: mt8195: Add dp-intf nodes
On Thu, 2022-09-15 at 16:13 +0800, AngeloGioacchino Del Regno wrote:
> Il 15/09/22 09:58, Bo-Chen Chen ha scritto:
> > Add dp-intf0 and dp-intf1 nodes for MT8195.
> >
> > Signed-off-by: Bo-Chen Chen <rex-bc.chen@...iatek.com>
> > ---
> > arch/arm64/boot/dts/mediatek/mt8195.dtsi | 23
> > +++++++++++++++++++++++
> > 1 file changed, 23 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
> > b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
> > index 905d1a90b406..93e6a106a9b8 100644
> > --- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
> > +++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
> > @@ -2155,5 +2155,28 @@
> > clock-names = "apb", "smi", "gals";
> > power-domains = <&spm
> > MT8195_POWER_DOMAIN_VDOSYS1>;
> > };
> > +
> > + dp_intf0: dp-intf@...15000 {
>
> Please keep the devicetree nodes ordered by mmio.
> dp_intf0 goes between mutex@...16000 and larb@...18000.
>
Hello Angelo,
Thanks for your review.
I think it should be merge@...14000 and mutex@...16000?
I will move dp-intf@...15000 between them.
> > + status = "disabled";
>
> status = "disabled" across the entire mt8195.dtsi nodes is always at
> the end.
> Please keep consistency.
>
OK, I will modify this in next version.
BRs,
Bo-Chen
> > + compatible = "mediatek,mt8195-dp-intf";
> > + reg = <0 0x1c015000 0 0x1000>;
> > + interrupts = <GIC_SPI 657 IRQ_TYPE_LEVEL_HIGH
> > 0>;
> > + clocks = <&vdosys0 CLK_VDO0_DP_INTF0>,
> > + <&vdosys0 CLK_VDO0_DP_INTF0_DP_INTF>,
> > + <&apmixedsys CLK_APMIXED_TVDPLL1>;
> > + clock-names = "engine", "pixel", "pll";
> > + };
> > +
> > + dp_intf1: dp-intf@...13000 {
> > + compatible = "mediatek,mt8195-dp-intf";
> > + reg = <0 0x1c113000 0 0x1000>;
> > + interrupts = <GIC_SPI 513 IRQ_TYPE_LEVEL_HIGH
> > 0>;
> > + power-domains = <&spm
> > MT8195_POWER_DOMAIN_VDOSYS1>;
> > + clocks = <&vdosys1 CLK_VDO1_DP_INTF0_MM>,
> > + <&vdosys1 CLK_VDO1_DPINTF>,
> > + <&apmixedsys CLK_APMIXED_TVDPLL2>;
> > + clock-names = "engine", "pixel", "pll";
> > + status = "disabled";
> > + };
> > };
> > };
>
>
Powered by blists - more mailing lists