| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20220915165404.ghcjntxom7kzqyuy@pengutronix.de>
Date: Thu, 15 Sep 2022 18:54:04 +0200
From: Marco Felsch <m.felsch@...gutronix.de>
To: Laurent Pinchart <laurent.pinchart@...asonboard.com>
Cc: mchehab@...nel.org, robh+dt@...nel.org,
krzysztof.kozlowski+dt@...aro.org, vkoul@...nel.org, kishon@...com,
sakari.ailus@...ux.intel.com, hverkuil@...all.nl,
jacopo@...ndi.org, linux-kernel@...r.kernel.org,
linux-phy@...ts.infradead.org, devicetree@...r.kernel.org,
linux-media@...r.kernel.org, kernel@...gutronix.de
Subject: Re: [PATCH 4/4] media: tc358746: add Toshiba TC358746 Parallel to
CSI-2 bridge driver
Hi Laurent,
On 22-09-05, Laurent Pinchart wrote:
> Hi Marco,
>
> Thank you for the patch.
>
> On Thu, Aug 18, 2022 at 04:33:07PM +0200, Marco Felsch wrote:
> > Adding support for the TC358746 parallel <-> MIPI CSI bridge. This chip
> > supports two operating modes:
> > 1st) parallel-in -> mipi-csi out
> > 2nd) mipi-csi in -> parallel out
> >
> > This patch only adds the support for the 1st mode.
> >
> > Signed-off-by: Marco Felsch <m.felsch@...gutronix.de>
> > ---
> > drivers/media/i2c/Kconfig | 17 +
> > drivers/media/i2c/Makefile | 1 +
> > drivers/media/i2c/tc358746.c | 1645 ++++++++++++++++++++++++++++++++++
> > 3 files changed, 1663 insertions(+)
> > create mode 100644 drivers/media/i2c/tc358746.c
> >
> > diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
> > index 7806d4b81716..aefb9c9e0c08 100644
> > --- a/drivers/media/i2c/Kconfig
> > +++ b/drivers/media/i2c/Kconfig
> > @@ -1272,6 +1272,23 @@ config VIDEO_TC358743_CEC
> > When selected the tc358743 will support the optional
> > HDMI CEC feature.
> >
> > +config VIDEO_TC358746
> > + tristate "Toshiba TC358746 parallel-CSI2 bridge"
> > + depends on VIDEO_DEV && I2C
> > + select VIDEO_V4L2_SUBDEV_API
> > + select MEDIA_CONTROLLER
> > + select V4L2_FWNODE
> > + select GENERIC_PHY_MIPI_DPHY
> > + select REGMAP_I2C
> > + select COMMON_CLK
> > + help
> > + Support for the Toshiba TC358746 parallel to MIPI CSI-2 bridge.
> > + The bridge can work in both directions but currently only the
> > + parallel-in / csi-out path is supported.
> > +
> > + To compile this driver as a module, choose M here: the
> > + module will be called tc358746.
> > +
> > config VIDEO_TVP514X
> > tristate "Texas Instruments TVP514x video decoder"
> > depends on VIDEO_DEV && I2C
> > diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
> > index 0a2933103dd9..d1096c2ab480 100644
> > --- a/drivers/media/i2c/Makefile
> > +++ b/drivers/media/i2c/Makefile
> > @@ -118,6 +118,7 @@ obj-$(CONFIG_VIDEO_SONY_BTF_MPX) += sony-btf-mpx.o
> > obj-$(CONFIG_VIDEO_SR030PC30) += sr030pc30.o
> > obj-$(CONFIG_VIDEO_ST_MIPID02) += st-mipid02.o
> > obj-$(CONFIG_VIDEO_TC358743) += tc358743.o
> > +obj-$(CONFIG_VIDEO_TC358746) += tc358746.o
> > obj-$(CONFIG_VIDEO_TDA1997X) += tda1997x.o
> > obj-$(CONFIG_VIDEO_TDA7432) += tda7432.o
> > obj-$(CONFIG_VIDEO_TDA9840) += tda9840.o
> > diff --git a/drivers/media/i2c/tc358746.c b/drivers/media/i2c/tc358746.c
> > new file mode 100644
> > index 000000000000..7b71d0cf72a9
> > --- /dev/null
> > +++ b/drivers/media/i2c/tc358746.c
> > @@ -0,0 +1,1645 @@
> > +// SPDX-License-Identifier: GPL-2.0-only
> > +/*
> > + * TC358746 - Parallel <-> CSI-2 Bridge
> > + *
> > + * Copyright 2022 Marco Felsch <kernel@...gutronix.de>
> > + *
> > + * Notes:
> > + * - Currently only 'Parallel-in -> CSI-out' mode is supported!
> > + */
> > +
> > +#include <linux/bitfield.h>
> > +#include <linux/clk.h>
> > +#include <linux/clk-provider.h>
> > +#include <linux/delay.h>
> > +#include <linux/i2c.h>
> > +#include <linux/interrupt.h>
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +#include <linux/phy/phy-mipi-dphy.h>
> > +#include <linux/property.h>
> > +#include <linux/pm_runtime.h>
> > +#include <linux/regmap.h>
> > +#include <media/v4l2-ctrls.h>
> > +#include <media/v4l2-device.h>
> > +#include <media/v4l2-fwnode.h>
> > +#include <media/v4l2-mc.h>
> > +
> > +/* 16-bit registers */
> > +#define CHIPID_REG 0x0000
> > +#define CHIPID GENMASK(15, 8)
> > +
> > +#define SYSCTL_REG 0x0002
> > +#define SRESET BIT(0)
> > +
> > +#define CONFCTL_REG 0x0004
> > +#define PDATAF_MASK GENMASK(9, 8)
> > +#define PDATAF_MODE0 0
> > +#define PDATAF_MODE1 1
> > +#define PDATAF_MODE2 2
> > +#define PDATAF(val) FIELD_PREP(PDATAF_MASK, (val))
> > +#define PPEN BIT(6)
> > +#define DATALANE_MASK GENMASK(1, 0)
> > +
> > +#define FIFOCTL_REG 0x0006
> > +#define DATAFMT_REG 0x0008
> > +#define PDFMT(val) FIELD_PREP(GENMASK(7, 4), (val))
> > +
> > +#define MCLKCTL_REG 0x000c
> > +#define MCLK_HIGH_MASK GENMASK(15, 8)
> > +#define MCLK_LOW_MASK GENMASK(7, 0)
> > +#define MCLK_HIGH(val) FIELD_PREP(MCLK_HIGH_MASK, (val))
> > +#define MCLK_LOW(val) FIELD_PREP(MCLK_LOW_MASK, (val))
> > +
> > +#define PLLCTL0_REG 0x0016
> > +#define PLL_PRD_MASK GENMASK(15, 12)
> > +#define PLL_PRD(val) FIELD_PREP(PLL_PRD_MASK, (val))
> > +#define PLL_FBD_MASK GENMASK(8, 0)
> > +#define PLL_FBD(val) FIELD_PREP(PLL_FBD_MASK, (val))
> > +
> > +#define PLLCTL1_REG 0x0018
> > +#define PLL_FRS_MASK GENMASK(11, 10)
> > +#define PLL_FRS(val) FIELD_PREP(PLL_FRS_MASK, (val))
> > +#define CKEN BIT(4)
> > +#define RESETB BIT(1)
> > +#define PLL_EN BIT(0)
> > +
> > +#define CLKCTL_REG 0x0020
> > +#define MCLKDIV_MASK GENMASK(3, 2)
> > +#define MCLKDIV(val) FIELD_PREP(MCLKDIV_MASK, (val))
> > +#define MCLKDIV_8 0
> > +#define MCLKDIV_4 1
> > +#define MCLKDIV_2 2
> > +
> > +#define WORDCNT_REG 0x0022
> > +#define PP_MISC_REG 0x0032
> > +#define FRMSTOP BIT(15)
> > +#define RSTPTR BIT(14)
> > +
> > +/* 32-bit registers */
> > +#define CLW_DPHYCONTTX_REG 0x0100
> > +#define CLW_CNTRL_REG 0x0140
> > +#define D0W_CNTRL_REG 0x0144
> > +#define LANEDISABLE BIT(0)
> > +
> > +#define STARTCNTRL_REG 0x0204
> > +#define START BIT(0)
> > +
> > +#define LINEINITCNT_REG 0x0210
> > +#define LPTXTIMECNT_REG 0x0214
> > +#define TCLK_HEADERCNT_REG 0x0218
> > +#define TCLK_ZEROCNT(val) FIELD_PREP(GENMASK(15, 8), (val))
> > +#define TCLK_PREPARECNT(val) FIELD_PREP(GENMASK(6, 0), (val))
> > +
> > +#define TCLK_TRAILCNT_REG 0x021C
> > +#define THS_HEADERCNT_REG 0x0220
> > +#define THS_ZEROCNT(val) FIELD_PREP(GENMASK(14, 8), (val))
> > +#define THS_PREPARECNT(val) FIELD_PREP(GENMASK(6, 0), (val))
> > +
> > +#define TWAKEUP_REG 0x0224
> > +#define TCLK_POSTCNT_REG 0x0228
> > +#define THS_TRAILCNT_REG 0x022C
> > +#define HSTXVREGEN_REG 0x0234
> > +#define TXOPTIONCNTRL_REG 0x0238
> > +#define CSI_CONTROL_REG 0x040C
> > +#define CSI_MODE BIT(15)
> > +#define TXHSMD BIT(7)
> > +#define NOL(val) FIELD_PREP(GENMASK(2, 1), (val))
> > +
> > +#define CSI_CONFW_REG 0x0500
> > +#define MODE(val) FIELD_PREP(GENMASK(31, 29), (val))
> > +#define MODE_SET 0x5
> > +#define ADDRESS(val) FIELD_PREP(GENMASK(28, 24), (val))
> > +#define CSI_CONTROL_ADDRESS 0x3
> > +#define DATA(val) FIELD_PREP(GENMASK(15, 0), (val))
> > +
> > +#define CSI_START_REG 0x0518
> > +#define STRT BIT(0)
> > +
> > +static const struct v4l2_mbus_framefmt tc358746_def_fmt = {
> > + .width = 640,
> > + .height = 480,
> > + .code = MEDIA_BUS_FMT_UYVY8_2X8,
> > + .field = V4L2_FIELD_NONE,
> > + .colorspace = V4L2_COLORSPACE_DEFAULT,
> > + .ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT,
> > + .quantization = V4L2_QUANTIZATION_DEFAULT,
> > + .xfer_func = V4L2_XFER_FUNC_DEFAULT,
> > +};
> > +
> > +static const char * const tc358746_supplies[] = {
> > + "vddc", "vddio", "vddmipi"
> > +};
> > +
> > +enum {
> > + TC358746_SINK,
> > + TC358746_SOURCE,
> > + TC358746_NR_PADS
> > +};
> > +
> > +struct tc358746 {
> > + struct v4l2_subdev sd;
> > + struct media_pad pads[TC358746_NR_PADS];
> > + struct v4l2_async_notifier notifier;
> > + struct v4l2_mbus_framefmt mbusfmt;
>
> Could you use the active state API instead of manually storing mbusfmt
> here ? It involves
I will do that, thanks for the hint and it also elimates a few basic
checks like the pad-num check.
> - Implementing the .init_cfg() operation
> - Calling v4l2_subdev_init_finalize() in probe
> - Replacing calls to __tc358746_get_pad_format() with
> v4l2_subdev_get_pad_format()
> - Propagating the format from sink to source in tc358746_set_fmt()
> - Dropping tc358746_src_mbus_code() from tc358746_get_fmt() and simply
> retrieving the format using v4l2_subdev_get_pad_format() there
> - Dropping this field
>
> The formats for both the ACTIVE and TRY states will then be stored in
> the subdev state, unconditionally. You can retrieve the active state
> with v4l2_subdev_get_locked_active_state() in tc358746_s_stream().
>
> > + struct v4l2_fwnode_endpoint csi_vep;
> > +
> > + struct v4l2_ctrl_handler ctrl_hdl;
> > +
> > + struct regmap *regmap;
> > + struct clk *refclk;
> > + struct gpio_desc *reset_gpio;
> > + struct regulator_bulk_data supplies[ARRAY_SIZE(tc358746_supplies)];
> > +
> > + struct clk_hw mclk_hw;
> > + unsigned long mclk_rate;
> > + u8 mclk_prediv;
> > + u16 mclk_postdiv;
> > +
> > + unsigned long pll_rate;
> > + u8 pll_post_div;
> > + u16 pll_pre_div;
> > + u16 pll_mul;
> > +
> > + struct v4l2_ctrl *sensor_pclk_ctrl;
> > +
> > +#define TC358746_VB_MAX_SIZE (511 * 32)
> > +#define TC358746_VB_DEFAULT_SIZE (1 * 32)
> > + unsigned int vb_size; /* Video buffer size in bits */
> > +
> > + struct phy_configure_opts_mipi_dphy dphy_cfg;
> > +};
> > +
> > +static inline struct tc358746 *to_tc358746(struct v4l2_subdev *sd)
> > +{
> > + return container_of(sd, struct tc358746, sd);
> > +}
> > +
> > +static inline struct tc358746 *clk_hw_to_tc358746(struct clk_hw *hw)
> > +{
> > + return container_of(hw, struct tc358746, mclk_hw);
> > +}
> > +
> > +struct tc358746_format {
> > + u32 code;
> > + bool csi_format;
> > + unsigned char bus_width;
> > + unsigned char bpp;
> > + /* Register values */
> > + u8 pdformat; /* Peripheral Data Format */
> > + u8 pdataf; /* Parallel Data Format Option */
> > +};
> > +
> > +enum {
> > + PDFORMAT_RAW8 = 0,
> > + PDFORMAT_RAW10,
> > + PDFORMAT_RAW12,
> > + PDFORMAT_RGB888,
> > + PDFORMAT_RGB666,
> > + PDFORMAT_RGB565,
> > + PDFORMAT_YUV422_8BIT,
> > + /* RESERVED = 7 */
> > + PDFORMAT_RAW14 = 8,
> > + PDFORMAT_YUV422_10BIT,
> > + PDFORMAT_YUV444,
> > +};
> > +
> > +/* Check tc358746_src_mbus_code() if you add new formats */
> > +static const struct tc358746_format tc358746_formats[] = {
> > + {
> > + .code = MEDIA_BUS_FMT_UYVY8_2X8,
> > + .bus_width = 8,
> > + .bpp = 16,
> > + .pdformat = PDFORMAT_YUV422_8BIT,
> > + .pdataf = PDATAF_MODE0,
> > + }, {
> > + .code = MEDIA_BUS_FMT_UYVY8_1X16,
> > + .csi_format = true,
> > + .bus_width = 16,
> > + .bpp = 16,
> > + .pdformat = PDFORMAT_YUV422_8BIT,
> > + .pdataf = PDATAF_MODE1,
> > + }, {
> > + .code = MEDIA_BUS_FMT_YUYV8_1X16,
> > + .csi_format = true,
> > + .bus_width = 16,
> > + .bpp = 16,
> > + .pdformat = PDFORMAT_YUV422_8BIT,
> > + .pdataf = PDATAF_MODE2,
> > + }, {
> > + .code = MEDIA_BUS_FMT_UYVY10_2X10,
> > + .bus_width = 10,
> > + .bpp = 20,
> > + .pdformat = PDFORMAT_YUV422_10BIT,
> > + .pdataf = PDATAF_MODE0, /* don't care */
> > + }, {
> > + /* in datasheet listed as YUV444 */
> > + .code = MEDIA_BUS_FMT_GBR888_1X24,
> > + .csi_format = true,
> > + .bus_width = 24,
> > + .bpp = 24,
> > + .pdformat = PDFORMAT_YUV444,
>
> This looks quite weird, does 24-bit RGB really map to the CSI-2 YUV444
> data type ?
It is written in the comments.. but I can drop for now since I don't
have a device to ensure it.
> > + .pdataf = PDATAF_MODE0, /* don't care */
> > + },
> > +};
> > +
> > +/* Get n-th format for pad */
> > +static const struct tc358746_format *
> > +tc358746_get_format_by_idx(unsigned int pad, unsigned int index)
> > +{
> > + unsigned int idx = 0;
> > + unsigned int i;
> > +
> > + if (pad >= TC358746_NR_PADS)
> > + return ERR_PTR(-EINVAL);
>
> That should be tested by the subdev core, I think you can drop the
> check. Same below.
Yes, thanks :)
> > +
> > + for (i = 0; i < ARRAY_SIZE(tc358746_formats); i++) {
> > + const struct tc358746_format *fmt = &tc358746_formats[i];
> > +
> > + if ((pad == TC358746_SOURCE && fmt->csi_format) ||
> > + (pad == TC358746_SINK)) {
> > + if (idx == index)
> > + return fmt;
> > + idx++;
> > + }
> > + }
> > +
> > + return ERR_PTR(-EINVAL);
> > +}
> > +
> > +static const struct tc358746_format *
> > +tc358746_get_format_by_code(unsigned int pad, u32 code)
> > +{
> > + unsigned int i;
> > +
> > + if (pad >= TC358746_NR_PADS)
> > + return ERR_PTR(-EINVAL);
> > +
> > + for (i = 0; i < ARRAY_SIZE(tc358746_formats); i++) {
> > + const struct tc358746_format *fmt = &tc358746_formats[i];
> > +
> > + if (pad == TC358746_SINK && fmt->code == code)
> > + return fmt;
> > +
> > + if (pad == TC358746_SOURCE && fmt->csi_format &&
> > + fmt->code == code)
> > + return fmt;
>
> You could also write
>
> if (pad == TC358746_SOURCE && !fmt->csi_format)
> continue;
>
> if (fmt->code == code)
> return fmt;
>
> Up to you.
Okay, I will do that.
> > + }
> > +
> > + return ERR_PTR(-EINVAL);
> > +}
> > +
> > +static u32 tc358746_src_mbus_code(u32 code)
> > +{
> > + switch (code) {
> > + case MEDIA_BUS_FMT_UYVY8_2X8:
> > + return MEDIA_BUS_FMT_UYVY8_1X16;
> > + case MEDIA_BUS_FMT_UYVY10_2X10:
> > + return MEDIA_BUS_FMT_UYVY10_1X20;
> > + default:
> > + return code;
> > + }
> > +}
> > +
> > +static bool tc358746_writeable_reg(struct device *dev, unsigned int reg)
> > +{
> > + switch (reg) {
> > + case SYSCTL_REG ... CSI_START_REG:
> > + return true;
> > + default:
> > + return false;
> > + }
> > +}
> > +
> > +static bool tc358746_readable_reg(struct device *dev, unsigned int reg)
> > +{
> > + switch (reg) {
> > + case CHIPID_REG ... CSI_START_REG:
> > + return true;
> > + default:
> > + return false;
> > + }
> > +}
> > +
> > +static const struct regmap_config tc358746_regmap_config = {
> > + .name = "tc358746",
> > + .reg_bits = 16,
> > + .val_bits = 16,
> > + .max_register = CSI_START_REG,
> > + .writeable_reg = tc358746_writeable_reg,
> > + .readable_reg = tc358746_readable_reg,
> > + .reg_format_endian = REGMAP_ENDIAN_BIG,
> > + .val_format_endian = REGMAP_ENDIAN_BIG,
> > +};
> > +
> > +static int tc358746_write(struct tc358746 *tc358746, u32 reg, u32 val)
> > +{
> > + size_t count;
> > +
> > + /* 32-bit registers starting from CLW_DPHYCONTTX */
> > + count = reg < CLW_DPHYCONTTX_REG ? 1 : 2;
> > +
> > + return regmap_bulk_write(tc358746->regmap, reg, &val, count);
> > +}
> > +
> > +static int tc358746_read(struct tc358746 *tc358746, u32 reg, u32 *val)
> > +{
> > + size_t count;
> > +
> > + /* 32-bit registers starting from CLW_DPHYCONTTX */
> > + count = reg < CLW_DPHYCONTTX_REG ? 1 : 2;
> > + *val = 0;
> > +
> > + return regmap_bulk_read(tc358746->regmap, reg, val, count);
> > +}
> > +
> > +static int
> > +tc358746_update_bits(struct tc358746 *tc358746, u32 reg, u32 mask, u32 val)
> > +{
> > + u32 tmp, orig;
> > + int err;
> > +
> > + err = tc358746_read(tc358746, reg, &orig);
> > + if (err)
> > + return err;
> > +
> > + tmp = orig & ~mask;
> > + tmp |= val & mask;
> > +
> > + return tc358746_write(tc358746, reg, tmp);
> > +}
> > +
> > +static int tc358746_set_bits(struct tc358746 *tc358746, u32 reg, u32 bits)
> > +{
> > + return tc358746_update_bits(tc358746, reg, bits, bits);
> > +}
> > +
> > +static int tc358746_clear_bits(struct tc358746 *tc358746, u32 reg, u32 bits)
> > +{
> > + return tc358746_update_bits(tc358746, reg, bits, 0);
> > +}
> > +
> > +static int tc358746_sw_reset(struct tc358746 *tc358746)
> > +{
> > + int err;
> > +
> > + err = tc358746_set_bits(tc358746, SYSCTL_REG, SRESET);
> > + if (err)
> > + return err;
> > +
> > + udelay(10);
> > +
> > + return tc358746_clear_bits(tc358746, SYSCTL_REG, SRESET);
> > +}
> > +
> > +static int
> > +tc358746_apply_pll_config(struct tc358746 *tc358746)
> > +{
> > + u8 post = tc358746->pll_post_div;
> > + u16 pre = tc358746->pll_pre_div;
> > + u16 mul = tc358746->pll_mul;
> > + u32 val, mask;
> > + int err;
> > +
> > + err = tc358746_read(tc358746, PLLCTL1_REG, &val);
> > + if (err)
> > + return err;
> > +
> > + /* Don't touch the PLL if running */
> > + if (FIELD_GET(PLL_EN, val) == 1)
> > + return 0;
> > +
> > + /* Pre-div and Multiplicator have a internal +1 logic */
> > + val = PLL_PRD(pre - 1) | PLL_FBD(mul - 1);
> > + mask = PLL_PRD_MASK | PLL_FBD_MASK;
> > + err = tc358746_update_bits(tc358746, PLLCTL0_REG, mask, val);
> > + if (err)
> > + return err;
> > +
> > + val = PLL_FRS(ilog2(post)) | RESETB | PLL_EN;
> > + mask = PLL_FRS_MASK | RESETB | PLL_EN;
> > + tc358746_update_bits(tc358746, PLLCTL1_REG, mask, val);
> > + if (err)
> > + return err;
> > +
> > + udelay(1000);
> > +
> > + return tc358746_set_bits(tc358746, PLLCTL1_REG, CKEN);
> > +}
> > +
> > +static int tc358746_apply_misc_config(struct tc358746 *tc358746)
> > +{
> > + struct device *dev = tc358746->sd.dev;
> > + const struct tc358746_format *fmt;
> > + u32 val;
> > + int err;
> > +
> > + fmt = tc358746_get_format_by_code(TC358746_SINK, tc358746->mbusfmt.code);
> > + if (IS_ERR(fmt))
> > + return PTR_ERR(fmt);
>
> mbusfmt.code is supposed to have been validated, so you can drop the
> error check here.
Yes.
> > +
> > + /* Self defined CSI user data type id's are not supported yet */
> > + val = PDFMT(fmt->pdformat);
> > + dev_dbg(dev, "DATAFMT: 0x%x\n", val);
> > + err = tc358746_write(tc358746, DATAFMT_REG, val);
> > + if (err)
> > + return err;
> > +
> > + val = PDATAF(fmt->pdataf);
> > + dev_dbg(dev, "CONFCTL[PDATAF]: 0x%x\n", fmt->pdataf);
> > + err = tc358746_update_bits(tc358746, CONFCTL_REG, PDATAF_MASK, val);
> > + if (err)
> > + return err;
> > +
> > + val = tc358746->vb_size / 32;
> > + dev_dbg(dev, "FIFOCTL: %u (0x%x)\n", val, val);
> > + err = tc358746_write(tc358746, FIFOCTL_REG, val);
> > + if (err)
> > + return err;
> > +
> > + /* Total number of bytes for each line/width */
> > + val = tc358746->mbusfmt.width * fmt->bpp / 8;
> > + dev_dbg(dev, "WORDCNT: %u (0x%x)\n", val, val);
> > + return tc358746_write(tc358746, WORDCNT_REG, val);
> > +}
> > +
> > +#ifndef MHZ
>
> Where would it be previously defined ? This sounds like asking for
> trouble later.
Sorry I don't get that, do you mean that I should define it at the very
beginning?
> > +#define MHZ (1000 * 1000)
> > +#endif
> > +
> > +/* Use MHz as base so the div needs no u64 */
> > +static u32 tc358746_cfg_to_cnt(unsigned int cfg_val,
> > + unsigned int clk_mhz,
> > + unsigned int time_base)
> > +{
> > + return DIV_ROUND_UP(cfg_val * clk_mhz, time_base);
> > +}
> > +
> > +static u32 tc358746_ps_to_cnt(unsigned int cfg_val,
> > + unsigned int clk_mhz)
> > +{
> > + return tc358746_cfg_to_cnt(cfg_val, clk_mhz, USEC_PER_SEC);
> > +}
> > +
> > +static u32 tc358746_us_to_cnt(unsigned int cfg_val,
> > + unsigned int clk_mhz)
> > +{
> > + return tc358746_cfg_to_cnt(cfg_val, clk_mhz, 1);
> > +}
> > +
> > +static int tc358746_apply_dphy_config(struct tc358746 *tc358746)
> > +{
> > + struct phy_configure_opts_mipi_dphy *cfg = &tc358746->dphy_cfg;
> > + bool non_cont_clk = !!(tc358746->csi_vep.bus.mipi_csi2.flags &
> > + V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK);
> > + struct device *dev = tc358746->sd.dev;
> > + unsigned long hs_byte_clk, hf_clk;
> > + u32 val, val2, lptxcnt;
> > + int err;
> > +
> > + /* The hs_byte_clk is also called SYSCLK in the excel sheet */
> > + hs_byte_clk = cfg->hs_clk_rate / 8;
> > + hs_byte_clk /= MHZ;
> > + hf_clk = hs_byte_clk / 2;
> > +
> > + val = tc358746_us_to_cnt(cfg->init, hf_clk) - 1;
> > + dev_dbg(dev, "LINEINITCNT: %u (0x%x)\n", val, val);
> > + err = tc358746_write(tc358746, LINEINITCNT_REG, val);
> > + if (err)
> > + return err;
> > +
> > + val = tc358746_ps_to_cnt(cfg->lpx, hs_byte_clk) - 1;
> > + lptxcnt = val;
> > + dev_dbg(dev, "LPTXTIMECNT: %u (0x%x)\n", val, val);
> > + err = tc358746_write(tc358746, LPTXTIMECNT_REG, val);
> > + if (err)
> > + return err;
> > +
> > + val = tc358746_ps_to_cnt(cfg->clk_prepare, hs_byte_clk) - 1;
> > + val2 = tc358746_ps_to_cnt(cfg->clk_zero, hs_byte_clk) - 1;
> > + dev_dbg(dev, "TCLK_PREPARECNT: %u (0x%x)\n", val, val);
> > + dev_dbg(dev, "TCLK_ZEROCNT: %u (0x%x)\n", val2, val2);
> > + dev_dbg(dev, "TCLK_HEADERCNT: 0x%x\n",
> > + (u32)(TCLK_PREPARECNT(val) | TCLK_ZEROCNT(val2)));
> > + err = tc358746_write(tc358746, TCLK_HEADERCNT_REG,
> > + TCLK_PREPARECNT(val) | TCLK_ZEROCNT(val2));
> > + if (err)
> > + return err;
> > +
> > + val = tc358746_ps_to_cnt(cfg->clk_trail, hs_byte_clk);
> > + dev_dbg(dev, "TCLK_TRAILCNT: %u (0x%x)\n", val, val);
> > + err = tc358746_write(tc358746, TCLK_TRAILCNT_REG, val);
> > + if (err)
> > + return err;
> > +
> > + val = tc358746_ps_to_cnt(cfg->hs_prepare, hs_byte_clk) - 1;
> > + val2 = tc358746_ps_to_cnt(cfg->hs_zero, hs_byte_clk) - 1;
> > + dev_dbg(dev, "THS_PREPARECNT: %u (0x%x)\n", val, val);
> > + dev_dbg(dev, "THS_ZEROCNT: %u (0x%x)\n", val2, val2);
> > + dev_dbg(dev, "THS_HEADERCNT: 0x%x\n",
> > + (u32)(THS_PREPARECNT(val) | THS_ZEROCNT(val2)));
> > + err = tc358746_write(tc358746, THS_HEADERCNT_REG,
> > + THS_PREPARECNT(val) | THS_ZEROCNT(val2));
> > + if (err)
> > + return err;
> > +
> > + /* TWAKEUP > 1ms in lptxcnt steps */
> > + val = tc358746_us_to_cnt(cfg->wakeup, hs_byte_clk);
> > + val = val / (lptxcnt + 1) - 1;
> > + dev_dbg(dev, "TWAKEUP: %u (0x%x)\n", val, val);
> > + err = tc358746_write(tc358746, TWAKEUP_REG, val);
> > + if (err)
> > + return err;
> > +
> > + val = tc358746_ps_to_cnt(cfg->clk_post, hs_byte_clk);
> > + dev_dbg(dev, "TCLK_POSTCNT: %u (0x%x)\n", val, val);
> > + err = tc358746_write(tc358746, TCLK_POSTCNT_REG, val);
> > + if (err)
> > + return err;
> > +
> > + val = tc358746_ps_to_cnt(cfg->hs_trail, hs_byte_clk);
> > + dev_dbg(dev, "THS_TRAILCNT: %u (0x%x)\n", val, val);
> > + err = tc358746_write(tc358746, THS_TRAILCNT_REG, val);
> > + if (err)
> > + return err;
> > +
> > + dev_dbg(dev, "CONTCLKMODE: %u", non_cont_clk ? 0 : 1);
> > + return tc358746_write(tc358746, TXOPTIONCNTRL_REG, non_cont_clk ? 0 : 1);
> > +}
> > +
> > +#define MAX_DATA_LANES 4
> > +
> > +static int tc358746_enable_csi_lanes(struct tc358746 *tc358746, int enable)
> > +{
> > + unsigned int lanes = tc358746->dphy_cfg.lanes;
> > + unsigned int lane;
> > + u32 reg, val;
> > + int err;
> > +
> > + err = tc358746_update_bits(tc358746, CONFCTL_REG, DATALANE_MASK,
> > + lanes - 1);
> > + if (err)
> > + return err;
> > +
> > + /* Clock lane */
> > + val = enable ? 0 : LANEDISABLE;
> > + dev_dbg(tc358746->sd.dev, "CLW_CNTRL: 0x%x\n", val);
> > + err = tc358746_write(tc358746, CLW_CNTRL_REG, val);
> > + if (err)
> > + return err;
> > +
> > + for (lane = 0; lane < MAX_DATA_LANES; lane++) {
> > + /* Data lanes */
> > + reg = D0W_CNTRL_REG + lane * 0x4;
> > + val = (enable && lane < lanes) ? 0 : LANEDISABLE;
> > +
> > + dev_dbg(tc358746->sd.dev, "D%uW_CNTRL: 0x%x\n", lane, val);
> > + err = tc358746_write(tc358746, reg, val);
> > + if (err)
> > + return err;
> > + }
> > +
> > + val = 0;
> > + if (enable) {
> > + /* Clock lane */
> > + val |= BIT(0);
> > +
> > + /* Data lanes */
> > + for (lane = 1; lane <= lanes; lane++)
> > + val |= BIT(lane);
> > + }
> > +
> > + dev_dbg(tc358746->sd.dev, "HSTXVREGEN: 0x%x\n", val);
> > + return tc358746_write(tc358746, HSTXVREGEN_REG, val);
> > +}
> > +
> > +static int tc358746_enable_csi_module(struct tc358746 *tc358746, int enable)
> > +{
> > + unsigned int lanes = tc358746->dphy_cfg.lanes;
> > + int err;
> > +
> > + /*
> > + * START and STRT are only reseted/disabled by sw reset. This is
> > + * required to put the lane state back into LP-11 state. The sw reset
> > + * don't reset register values.
> > + */
> > + if (!enable)
> > + return tc358746_sw_reset(tc358746);
> > +
> > + err = tc358746_write(tc358746, STARTCNTRL_REG, START);
> > + if (err)
> > + return err;
> > +
> > + err = tc358746_write(tc358746, CSI_START_REG, STRT);
> > + if (err)
> > + return err;
> > +
> > + /* CSI_CONTROL_REG is only indirect accessible */
> > + return tc358746_write(tc358746, CSI_CONFW_REG,
> > + MODE(MODE_SET) |
> > + ADDRESS(CSI_CONTROL_ADDRESS) |
> > + DATA(CSI_MODE | TXHSMD | NOL(lanes - 1)));
> > +}
> > +
> > +static int tc358746_enable_parallel_port(struct tc358746 *tc358746, int enable)
> > +{
> > + int err;
> > +
> > + if (enable) {
> > + err = tc358746_write(tc358746, PP_MISC_REG, 0);
> > + if (err)
> > + return err;
> > +
> > + return tc358746_set_bits(tc358746, CONFCTL_REG, PPEN);
> > + }
> > +
> > + err = tc358746_set_bits(tc358746, PP_MISC_REG, FRMSTOP);
> > + if (err)
> > + return err;
> > +
> > + err = tc358746_clear_bits(tc358746, CONFCTL_REG, PPEN);
> > + if (err)
> > + return err;
> > +
> > + return tc358746_set_bits(tc358746, PP_MISC_REG, RSTPTR);
> > +}
> > +
> > +static inline struct v4l2_subdev *tc358746_get_remote_sd(struct media_pad *pad)
> > +{
> > + pad = media_pad_remote_pad_first(pad);
> > + if (!pad)
> > + return NULL;
> > +
> > + return media_entity_to_v4l2_subdev(pad->entity);
> > +}
> > +
> > +static int tc358746_s_stream(struct v4l2_subdev *sd, int enable)
> > +{
> > + struct tc358746 *tc358746 = to_tc358746(sd);
> > + struct v4l2_subdev *src;
> > + int err;
> > +
> > + dev_dbg(sd->dev, "%sable\n", enable ? "en" : "dis");
> > +
> > + src = tc358746_get_remote_sd(&tc358746->pads[TC358746_SINK]);
> > + if (!src)
> > + return -EPIPE;
> > +
> > + if (enable) {
> > + err = pm_runtime_resume_and_get(sd->dev);
> > + if (err)
> > + return err;
> > +
> > + err = tc358746_enable_csi_lanes(tc358746, 1);
> > + if (err) {
> > + pm_runtime_mark_last_busy(sd->dev);
> > + pm_runtime_put_sync_autosuspend(sd->dev);
> > + return err;
>
> Looks like a candidate for a goto statement.
Thought about it too but than I thought about the placement of the
label and I went this way. I can change it. Should the label placed at
the end of the function or at the end of this block.
> > + }
> > +
> > + err = tc358746_enable_csi_module(tc358746, 1);
> > + if (err) {
> > + pm_runtime_mark_last_busy(sd->dev);
> > + pm_runtime_put_sync_autosuspend(sd->dev);
> > + return err;
> > + }
> > +
> > + err = tc358746_enable_parallel_port(tc358746, 1);
> > + if (err) {
> > + pm_runtime_mark_last_busy(sd->dev);
> > + pm_runtime_put_sync_autosuspend(sd->dev);
> > + return err;
> > + }
> > +
> > + err = v4l2_subdev_call(src, video, s_stream, 1);
> > + if (err) {
> > + pm_runtime_mark_last_busy(sd->dev);
> > + pm_runtime_put_sync_autosuspend(sd->dev);
> > + }
> > +
> > + return err;
> > + }
> > +
> > + /*
> > + * Lane disable trigger state change from LP-11 to LP-00
> > + * therefore it must happen before the CSI modile is disabled.
> > + */
> > + err = tc358746_enable_csi_lanes(tc358746, 0);
> > + if (err)
> > + return err;
> > +
> > + err = tc358746_enable_csi_module(tc358746, 0);
> > + if (err)
> > + return err;
> > +
> > + err = tc358746_enable_parallel_port(tc358746, 0);
> > + if (err)
> > + return err;
> > +
> > + pm_runtime_mark_last_busy(sd->dev);
> > + pm_runtime_put_sync_autosuspend(sd->dev);
> > +
> > + return v4l2_subdev_call(src, video, s_stream, 0);
> > +}
> > +
> > +static int tc358746_enum_mbus_code(struct v4l2_subdev *sd,
> > + struct v4l2_subdev_state *sd_state,
> > + struct v4l2_subdev_mbus_code_enum *code)
> > +{
> > + const struct tc358746_format *fmt;
> > +
> > + fmt = tc358746_get_format_by_idx(code->pad, code->index);
> > + if (IS_ERR(fmt))
> > + return PTR_ERR(fmt);
> > +
> > + code->code = fmt->code;
> > +
> > + return 0;
> > +}
> > +
> > +static struct v4l2_mbus_framefmt *
> > +__tc358746_get_pad_format(struct v4l2_subdev *sd,
> > + struct v4l2_subdev_state *sd_state,
> > + unsigned int pad, u32 which)
> > +{
> > + struct tc358746 *tc358746 = to_tc358746(sd);
> > +
> > + switch (which) {
> > + case V4L2_SUBDEV_FORMAT_TRY:
> > + return v4l2_subdev_get_try_format(sd, sd_state, pad);
> > + case V4L2_SUBDEV_FORMAT_ACTIVE:
> > + return &tc358746->mbusfmt;
> > + default:
> > + return NULL;
> > + }
> > +}
> > +
> > +static int tc358746_get_fmt(struct v4l2_subdev *sd,
> > + struct v4l2_subdev_state *sd_state,
> > + struct v4l2_subdev_format *format)
> > +{
> > + struct tc358746 *tc358746 = to_tc358746(sd);
> > +
> > + if (format->pad >= TC358746_NR_PADS)
> > + return -EINVAL;
> > +
> > + format->format = tc358746->mbusfmt;
> > + if (format->pad == TC358746_SOURCE)
> > + format->format.code = tc358746_src_mbus_code(tc358746->mbusfmt.code);
> > +
> > + return 0;
> > +}
> > +
> > +static int tc358746_set_fmt(struct v4l2_subdev *sd,
> > + struct v4l2_subdev_state *sd_state,
> > + struct v4l2_subdev_format *format)
> > +{
> > + struct v4l2_mbus_framefmt *mbusformat;
> > + const struct tc358746_format *fmt;
> > +
> > + if (format->pad >= TC358746_NR_PADS)
> > + return -EINVAL;
> > +
> > + /* The src follows the properties from the sink */
> > + if (format->pad == TC358746_SOURCE)
> > + return tc358746_get_fmt(sd, sd_state, format);
> > +
> > + mbusformat = __tc358746_get_pad_format(sd, sd_state, format->pad,
> > + format->which);
> > + if (!mbusformat)
> > + return -EINVAL;
> > +
> > + fmt = tc358746_get_format_by_code(format->pad, format->format.code);
> > + if (IS_ERR(fmt))
> > + fmt = tc358746_get_format_by_code(format->pad, tc358746_def_fmt.code);
> > +
> > + format->format.code = fmt->code;
> > + format->format.field = V4L2_FIELD_NONE;
> > +
> > + dev_dbg(sd->dev, "Update format: %ux%u code:0x%x -> %ux%u code:0x%x",
> > + mbusformat->width, mbusformat->height, mbusformat->code,
> > + format->format.width, format->format.height, format->format.code);
> > +
> > + *mbusformat = format->format;
> > +
> > + return 0;
> > +}
> > +
> > +static unsigned long tc358746_find_pll_settings(struct tc358746 *tc358746,
> > + unsigned long refclk,
> > + unsigned long fout)
> > +
> > +{
> > + struct device *dev = tc358746->sd.dev;
> > + unsigned long best_freq = 0;
> > + u32 min_delta = 0xffffffff;
> > + u16 prediv_max = 17;
> > + u16 prediv_min = 1;
> > + u16 m_best, mul;
> > + u16 p_best, p;
> > + u8 postdiv;
> > +
> > + if (fout > 1000 * MHZ) {
> > + dev_err(dev, "HS-Clock above 1 Ghz are not supported\n");
> > + return 0;
> > + } else if (fout >= 500 * MHZ)
> > + postdiv = 1;
> > + else if (fout >= 250 * MHZ)
> > + postdiv = 2;
> > + else if (fout >= 125 * MHZ)
> > + postdiv = 4;
> > + else
> > + postdiv = 8;
> > +
> > + for (p = prediv_min; p <= prediv_max; p++) {
> > + unsigned long delta, fin;
> > + u64 tmp;
> > +
> > + fin = DIV_ROUND_CLOSEST(refclk, p);
> > + if (fin < 4 * MHZ || fin > 40 * MHZ)
> > + continue;
> > +
> > + tmp = fout * p * postdiv;
> > + do_div(tmp, fin);
> > + mul = tmp;
> > + if (mul > 511)
> > + continue;
> > +
> > + tmp = mul * fin;
> > + do_div(tmp, p * postdiv);
> > +
> > + delta = abs(fout - tmp);
> > + if (delta < min_delta) {
> > + p_best = p;
> > + m_best = mul;
> > + min_delta = delta;
> > + best_freq = tmp;
> > + };
> > +
> > + if (delta == 0)
> > + break;
> > + };
> > +
> > + if (!best_freq) {
> > + dev_err(dev, "Failed find PLL frequency\n");
> > + return 0;
> > + }
> > +
> > + tc358746->pll_post_div = postdiv;
> > + tc358746->pll_pre_div = p_best;
> > + tc358746->pll_mul = m_best;
> > +
> > + if (best_freq != fout)
> > + dev_warn(dev, "Request PLL freq:%lu, found PLL freq:%lu\n",
> > + fout, best_freq);
> > +
> > + dev_dbg(dev, "Found PLL settings: freq:%lu prediv:%u multi:%u postdiv:%u\n",
> > + best_freq, p_best, m_best, postdiv);
> > +
> > + return best_freq;
> > +}
> > +
> > +#define TC358746_PRECISION 10
> > +
> > +static int
> > +tc358746_link_validate(struct v4l2_subdev *sd, struct media_link *link,
> > + struct v4l2_subdev_format *source_fmt,
> > + struct v4l2_subdev_format *sink_fmt)
> > +{
> > + struct tc358746 *tc358746 = to_tc358746(sd);
> > + unsigned long csi_bitrate, sensor_bitrate;
> > + const struct tc358746_format *fmt;
> > + unsigned int fifo_sz, tmp, n;
> > + s64 sensor_pclk_rate;
> > +
> > + /* Check the FIFO settings */
> > + fmt = tc358746_get_format_by_code(TC358746_SINK, tc358746->mbusfmt.code);
> > + if (IS_ERR(fmt))
> > + return PTR_ERR(fmt);
> > +
> > + sensor_pclk_rate = v4l2_ctrl_g_ctrl_int64(tc358746->sensor_pclk_ctrl);
> > + sensor_bitrate = sensor_pclk_rate * fmt->bus_width;
> > +
> > + csi_bitrate = tc358746->dphy_cfg.lanes * tc358746->pll_rate;
> > +
> > + dev_dbg(tc358746->sd.dev,
> > + "Fifo settings params: sensor-bitrate:%lu csi-bitrate:%lu",
> > + sensor_bitrate, csi_bitrate);
> > +
> > + /* Avoid possible FIFO overflows */
> > + if (csi_bitrate < sensor_bitrate) {
> > + dev_err(sd->dev,
> > + "Link validation failed csi-bitrate:%lu < sensor-bitrate:%lu\n",
> > + csi_bitrate, sensor_bitrate);
> > + return -EINVAL;
> > + }
> > +
> > + /* Best case */
> > + if (csi_bitrate == sensor_bitrate) {
> > + tc358746->vb_size = TC358746_VB_DEFAULT_SIZE;
> > + goto out;
> > + }
> > +
> > + /*
> > + * Avoid possible FIFO underflow in case of
> > + * csi_bitrate > sensor_bitrate. For such case the chip has a internal
> > + * fifo which can be used to delay the line output.
> > + *
> > + * Fifo size calculation:
> > + *
> > + * fifo-sz, image-width - in bits
> > + * sbr - sensor_bitrate in bits/s
> > + * csir - csi_bitrate in bits/s
> > + *
> > + * 1 1 1
> > + * image-width * --- + fifo-sz --- >= ---- * image-width
> > + * sbr sbr csir
> > + *
> > + * fifo-sz >= abs(sbr/csir * image-width - image-width)
> > + * `-----´
> > + * n
> > + *
> > + */
> > +
> > + sensor_bitrate /= TC358746_PRECISION;
> > + n = csi_bitrate / sensor_bitrate;
> > + tmp = (tc358746->mbusfmt.width * TC358746_PRECISION) / n;
> > + fifo_sz = tc358746->mbusfmt.width - tmp;
> > + fifo_sz *= fmt->bpp;
> > + tc358746->vb_size = round_up(fifo_sz, 32);
> > +
>
> Please also call v4l2_subdev_link_validate_default() here.
Did it in my internal prepared v2 ^^ I call it now at the very
beginning of this function.
> I wonder if the above calculation wouldn't be better performed in
> .s_stream() (or rather in a function being called by .s_stream()) when
> enabling streaming.
No I wouldn't shift that, since the link validation is in IMHO the
correct place to inform the user that the pipeline can't negotiate if
the fifo can't be configured correctly. Therefore I placed it here.
> > +out:
> > + dev_dbg(tc358746->sd.dev,
> > + "Found FIFO size[bits]:%u -> aligned to size[bits]:%u\n",
> > + fifo_sz, tc358746->vb_size);
> > +
> > + return tc358746->vb_size > TC358746_VB_MAX_SIZE ? -EINVAL : 0;
> > +}
> > +
> > +static int tc358746_get_mbus_config(struct v4l2_subdev *sd, unsigned int pad,
> > + struct v4l2_mbus_config *config)
> > +{
> > + struct tc358746 *tc358746 = to_tc358746(sd);
> > +
> > + if (pad != TC358746_SOURCE)
> > + return -EINVAL;
> > +
> > + config->type = V4L2_MBUS_CSI2_DPHY;
> > + config->bus.mipi_csi2 = tc358746->csi_vep.bus.mipi_csi2;
> > +
> > + return 0;
> > +}
> > +
> > +static int tc358746_link_setup(struct media_entity *entity,
> > + const struct media_pad *local,
> > + const struct media_pad *remote, u32 flags)
> > +{
> > + struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(entity);
> > + struct v4l2_subdev *sensor_sd =
> > + media_entity_to_v4l2_subdev(remote->entity);
> > + struct tc358746 *tc358746 = to_tc358746(sd);
> > + struct device *dev = sd->dev;
> > + struct v4l2_ctrl *ctrl;
> > +
> > + /* no special requirements on source pads */
> > + if (local->flags & MEDIA_PAD_FL_SOURCE)
> > + return 0;
> > +
> > + dev_dbg(dev, "link setup '%s':%d->'%s':%d[%d]",
> > + remote->entity->name, remote->index, local->entity->name,
> > + local->index, flags & MEDIA_LNK_FL_ENABLED);
> > +
> > + /* Required for the fifo calculation */
> > + ctrl = v4l2_ctrl_find(sensor_sd->ctrl_handler, V4L2_CID_PIXEL_RATE);
> > + if (!ctrl) {
> > + dev_err(dev, "Subdev [%s] must support V4L2_CID_PIXEL_RATE\n",
> > + sensor_sd->name);
> > + return -EINVAL;
> > + }
> > + tc358746->sensor_pclk_ctrl = ctrl;
> > +
> > + return 0;
> > +}
> > +
> > +int __maybe_unused
> > +tc358746_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg)
> > +{
> > + struct tc358746 *tc358746 = to_tc358746(sd);
> > +
> > + /* 32-bit registers starting from CLW_DPHYCONTTX */
> > + reg->size = reg->reg < CLW_DPHYCONTTX_REG ? 2 : 4;
> > +
> > + if (pm_runtime_resume_and_get(sd->dev)) {
> > + dev_err(sd->dev, "Failed to resume the device\n");
> > + return 0;
> > + }
> > +
> > + tc358746_read(tc358746, reg->reg, (u32 *)®->val);
> > +
> > + pm_runtime_mark_last_busy(sd->dev);
> > + pm_runtime_put_sync_autosuspend(sd->dev);
> > +
> > + return 0;
> > +}
> > +
> > +int __maybe_unused
> > +tc358746_s_register(struct v4l2_subdev *sd, const struct v4l2_dbg_register *reg)
> > +{
> > + struct tc358746 *tc358746 = to_tc358746(sd);
> > +
> > + if (pm_runtime_resume_and_get(sd->dev)) {
> > + dev_err(sd->dev, "Failed to resume the device\n");
> > + return 0;
> > + }
> > +
> > + tc358746_write(tc358746, (u32)reg->reg, (u32)reg->val);
> > +
> > + pm_runtime_mark_last_busy(sd->dev);
> > + pm_runtime_put_sync_autosuspend(sd->dev);
> > +
> > + return 0;
> > +}
> > +
> > +static const struct v4l2_subdev_core_ops tc358746_core_ops = {
> > +#ifdef CONFIG_VIDEO_ADV_DEBUG
> > + .g_register = tc358746_g_register,
> > + .s_register = tc358746_s_register,
> > +#endif
>
> Have you found this to be useful ?
It's useful since the regmap usage, because some registers are 32bit
wide and some 16bit wide... Those functions abstract it and I can set
values :) which is not allowed by the regmap debug interface. So yes,
it's not that bad..
> > +};
> > +
> > +static const struct v4l2_subdev_video_ops tc358746_video_ops = {
> > + .s_stream = tc358746_s_stream,
> > +};
> > +
> > +static const struct v4l2_subdev_pad_ops tc358746_pad_ops = {
> > + .enum_mbus_code = tc358746_enum_mbus_code,
> > + .set_fmt = tc358746_set_fmt,
> > + .get_fmt = tc358746_get_fmt,
> > + .link_validate = tc358746_link_validate,
> > + .get_mbus_config = tc358746_get_mbus_config,
> > +};
> > +
> > +static const struct v4l2_subdev_ops tc358746_ops = {
> > + .core = &tc358746_core_ops,
> > + .video = &tc358746_video_ops,
> > + .pad = &tc358746_pad_ops,
> > +};
> > +
> > +static const struct media_entity_operations tc358746_entity_ops = {
> > + .get_fwnode_pad = v4l2_subdev_get_fwnode_pad_1_to_1,
> > + .link_setup = tc358746_link_setup,
> > + .link_validate = v4l2_subdev_link_validate,
> > +};
> > +
> > +static int tc358746_mclk_enable(struct clk_hw *hw)
> > +{
> > + struct tc358746 *tc358746 = clk_hw_to_tc358746(hw);
> > + unsigned int div;
> > + u32 val;
> > + int err;
> > +
> > + div = tc358746->mclk_postdiv / 2;
> > + val = MCLK_HIGH(div - 1) | MCLK_LOW(div - 1);
> > + dev_dbg(tc358746->sd.dev, "MCLKCTL: %u (0x%x)\n", val, val);
> > + err = tc358746_write(tc358746, MCLKCTL_REG, val);
> > + if (err)
> > + return err;
> > +
> > + if (tc358746->mclk_prediv == 8)
> > + val = MCLKDIV(MCLKDIV_8);
> > + else if (tc358746->mclk_prediv == 4)
> > + val = MCLKDIV(MCLKDIV_4);
> > + else
> > + val = MCLKDIV(MCLKDIV_2);
> > +
> > + dev_dbg(tc358746->sd.dev, "CLKCTL[MCLKDIV]: %u (0x%x)\n", val, val);
> > + return tc358746_update_bits(tc358746, CLKCTL_REG, MCLKDIV_MASK, val);
> > +}
> > +
> > +static void tc358746_mclk_disable(struct clk_hw *hw)
> > +{
> > + struct tc358746 *tc358746 = clk_hw_to_tc358746(hw);
> > +
> > + tc358746_write(tc358746, MCLKCTL_REG, 0);
> > +}
> > +
> > +static long
> > +tc358746_find_mclk_settings(struct tc358746 *tc358746, unsigned long mclk_rate)
> > +{
> > + unsigned long pll_rate = tc358746->pll_rate;
> > + const unsigned char prediv[] = { 2, 4, 8 };
> > + unsigned int mclk_prediv, mclk_postdiv;
> > + struct device *dev = tc358746->sd.dev;
> > + unsigned int postdiv, mclkdiv;
> > + unsigned long best_mclk_rate;
> > + unsigned int i;
> > +
> > + /*
> > + * MCLK-Div
> > + * -------------------´`---------------------
> > + * ´ `
> > + * +-------------+ +------------------------+
> > + * | MCLK-PreDiv | | MCLK-PostDiv |
> > + * PLL --> | (2/4/8) | --> | (mclk_low + mclk_high) | --> MCLK
> > + * +-------------+ +------------------------+
> > + *
> > + * The register value of mclk_low/high is mclk_low/high+1, i.e.:
> > + * mclk_low/high = 1 --> 2 MCLK-Ref Counts
> > + * mclk_low/high = 255 --> 256 MCLK-Ref Counts == max.
> > + * If mclk_low and mclk_high are 0 then MCLK is disabled.
> > + *
> > + * Keep it simple and support 50/50 duty cycles only for now,
> > + * so the calc will be:
> > + *
> > + * MCLK = PLL / (MCLK-PreDiv * 2 * MCLK-PostDiv)
> > + */
> > +
> > + if (mclk_rate == tc358746->mclk_rate)
> > + return mclk_rate;
> > +
> > + /* Highest possible rate */
> > + mclkdiv = pll_rate / mclk_rate;
> > + if (mclkdiv <= 8) {
> > + mclk_prediv = 2;
> > + mclk_postdiv = 4;
> > + best_mclk_rate = pll_rate / (2 * 4);
> > + goto out;
> > + }
> > +
> > + /* First check the prediv */
> > + for (i = 0; i < ARRAY_SIZE(prediv); i++) {
> > + postdiv = mclkdiv / prediv[i];
> > +
> > + if (postdiv % 2)
> > + continue;
> > +
> > + if (postdiv >= 4 && postdiv <= 512) {
> > + mclk_prediv = prediv[i];
> > + mclk_postdiv = postdiv;
> > + best_mclk_rate = pll_rate / (prediv[i] * postdiv);
> > + goto out;
> > + }
> > + }
> > +
> > + /* No suitable prediv found, so try to adjust the postdiv */
> > + for (postdiv = 4; postdiv <= 512; postdiv += 2) {
> > + unsigned int pre;
> > +
> > + pre = mclkdiv / postdiv;
> > + if (pre == 2 || pre == 4 || pre == 8) {
> > + mclk_prediv = pre;
> > + mclk_postdiv = postdiv;
> > + best_mclk_rate = pll_rate / (pre * postdiv);
> > + goto out;
> > + }
> > + }
> > +
> > + /* The MCLK <-> PLL gap is to high -> use largest possible div */
> > + mclk_prediv = 8;
> > + mclk_postdiv = 512;
> > + best_mclk_rate = pll_rate / (8 * 512);
> > +
> > +out:
> > + tc358746->mclk_prediv = mclk_prediv;
> > + tc358746->mclk_postdiv = mclk_postdiv;
> > + tc358746->mclk_rate = best_mclk_rate;
> > +
> > + if (best_mclk_rate != mclk_rate)
> > + dev_warn(dev, "Request MCLK freq:%lu, found MCLK freq:%lu\n",
> > + mclk_rate, best_mclk_rate);
> > +
> > + dev_dbg(dev, "Found MCLK settings: freq:%lu prediv:%u postdiv:%u\n",
> > + best_mclk_rate, mclk_prediv, mclk_postdiv);
> > +
> > + return best_mclk_rate;
> > +}
> > +
> > +unsigned long tc358746_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
> > +{
> > + struct tc358746 *tc358746 = clk_hw_to_tc358746(hw);
> > + unsigned int prediv, postdiv;
> > + u32 val;
> > + int err;
> > +
> > + err = tc358746_read(tc358746, MCLKCTL_REG, &val);
> > + if (err)
> > + return 0;
> > +
> > + postdiv = FIELD_GET(MCLK_LOW_MASK, val) + 1;
> > + postdiv += FIELD_GET(MCLK_HIGH_MASK, val) + 1;
> > +
> > + err = tc358746_read(tc358746, CLKCTL_REG, &val);
> > + if (err)
> > + return 0;
> > +
> > + prediv = FIELD_GET(MCLKDIV_MASK, val);
> > + if (prediv == MCLKDIV_8)
> > + prediv = 8;
> > + else if (prediv == MCLKDIV_4)
> > + prediv = 4;
> > + else
> > + prediv = 2;
> > +
> > + return tc358746->pll_rate / (prediv * postdiv);
> > +}
> > +
> > +static long tc358746_mclk_round_rate(struct clk_hw *hw, unsigned long rate,
> > + unsigned long *parent_rate)
> > +{
> > + struct tc358746 *tc358746 = clk_hw_to_tc358746(hw);
> > +
> > + *parent_rate = tc358746->pll_rate;
> > +
> > + return tc358746_find_mclk_settings(tc358746, rate);
> > +}
> > +
> > +static int tc358746_mclk_set_rate(struct clk_hw *hw, unsigned long rate,
> > + unsigned long parent_rate)
> > +{
> > + struct tc358746 *tc358746 = clk_hw_to_tc358746(hw);
> > +
> > + tc358746_find_mclk_settings(tc358746, rate);
> > +
> > + return tc358746_mclk_enable(hw);
> > +}
> > +
> > +static const struct clk_ops tc358746_mclk_ops = {
> > + .enable = tc358746_mclk_enable,
> > + .disable = tc358746_mclk_disable,
> > + .recalc_rate = tc358746_recalc_rate,
> > + .round_rate = tc358746_mclk_round_rate,
> > + .set_rate = tc358746_mclk_set_rate,
> > +};
> > +
> > +static int tc358746_notify_bound(struct v4l2_async_notifier *notifier,
> > + struct v4l2_subdev *sd,
> > + struct v4l2_async_subdev *asd)
> > +{
> > + struct tc358746 *tc358746 =
> > + container_of(notifier, struct tc358746, notifier);
> > + struct media_pad *sink = &tc358746->pads[TC358746_SINK];
> > +
> > + return v4l2_create_fwnode_links_to_pad(sd, sink, MEDIA_LNK_FL_ENABLED);
> > +}
> > +
> > +static const struct v4l2_async_notifier_operations tc358746_notify_ops = {
> > + .bound = tc358746_notify_bound,
> > +};
> > +
> > +static int tc358746_async_register(struct tc358746 *tc358746)
> > +{
> > + struct v4l2_fwnode_endpoint vep = {
> > + .bus_type = V4L2_MBUS_PARALLEL,
> > + };
> > + struct v4l2_async_subdev *asd;
> > + struct fwnode_handle *ep;
> > + int err;
> > +
> > + ep = fwnode_graph_get_endpoint_by_id(dev_fwnode(tc358746->sd.dev),
> > + TC358746_SINK, 0, 0);
> > + if (!ep)
> > + return -ENOTCONN;
> > +
> > + err = v4l2_fwnode_endpoint_parse(ep, &vep);
> > + if (err) {
> > + fwnode_handle_put(ep);
> > + return err;
> > + }
> > +
> > + v4l2_async_nf_init(&tc358746->notifier);
> > + asd = v4l2_async_nf_add_fwnode_remote(&tc358746->notifier, ep,
> > + struct v4l2_async_subdev);
> > + if (IS_ERR(asd)) {
> > + fwnode_handle_put(ep);
> > + return PTR_ERR(asd);
> > + }
> > +
> > + fwnode_handle_put(ep);
> > +
> > + tc358746->notifier.ops = &tc358746_notify_ops;
> > +
> > + err = v4l2_async_subdev_nf_register(&tc358746->sd, &tc358746->notifier);
> > + if (err) {
> > + v4l2_async_nf_cleanup(&tc358746->notifier);
> > + return err;
> > + }
> > +
> > + tc358746->sd.fwnode = fwnode_graph_get_endpoint_by_id(
> > + dev_fwnode(tc358746->sd.dev), TC358746_SOURCE, 0, 0);
> > +
> > + err = v4l2_async_register_subdev(&tc358746->sd);
> > + if (err) {
> > + v4l2_async_nf_unregister(&tc358746->notifier);
> > + v4l2_async_nf_cleanup(&tc358746->notifier);
> > + }
> > +
> > + return err;
> > +}
> > +
> > +static int tc358746_probe(struct i2c_client *client)
> > +{
> > + struct clk_init_data mclk_initdata = { };
> > + struct device *dev = &client->dev;
> > + struct v4l2_fwnode_endpoint *vep;
> > + unsigned long csi_link_rate;
> > + struct tc358746 *tc358746;
> > + struct fwnode_handle *ep;
> > + unsigned char csi_lanes;
> > + struct v4l2_subdev *sd;
> > + struct v4l2_ctrl *ctrl;
> > + unsigned long refclk;
> > + unsigned int i;
> > + int err;
> > + u32 val;
> > +
> > + tc358746 = devm_kzalloc(&client->dev, sizeof(*tc358746), GFP_KERNEL);
> > + if (!tc358746)
> > + return -ENOMEM;
> > +
> > + tc358746->regmap = devm_regmap_init_i2c(client, &tc358746_regmap_config);
> > + if (IS_ERR(tc358746->regmap))
> > + return dev_err_probe(dev, PTR_ERR(tc358746->regmap),
> > + "Failed to init regmap\n");
> > +
> > + tc358746->refclk = devm_clk_get(dev, "refclk");
> > + if (IS_ERR(tc358746->refclk))
> > + return dev_err_probe(dev, PTR_ERR(tc358746->refclk),
> > + "Failed to get refclk\n");
> > +
> > + err = clk_prepare_enable(tc358746->refclk);
> > + if (err)
> > + return dev_err_probe(dev, err,
> > + "Failed to enable refclk\n");
> > +
> > + refclk = clk_get_rate(tc358746->refclk);
> > + clk_disable_unprepare(tc358746->refclk);
> > +
> > + if (refclk < 6 * MHZ || refclk > 40 * MHZ)
> > + return dev_err_probe(dev, -EINVAL, "Invalid refclk range\n");
> > +
> > + for (i = 0; i < ARRAY_SIZE(tc358746_supplies); i++)
> > + tc358746->supplies[i].supply = tc358746_supplies[i];
> > +
> > + err = devm_regulator_bulk_get(dev, ARRAY_SIZE(tc358746_supplies),
> > + tc358746->supplies);
> > + if (err)
> > + return dev_err_probe(dev, err, "Failed to get supplies\n");
> > +
> > + tc358746->reset_gpio = devm_gpiod_get_optional(dev, "reset",
> > + GPIOD_OUT_HIGH);
> > + if (IS_ERR(tc358746->reset_gpio))
> > + return dev_err_probe(dev, PTR_ERR(tc358746->reset_gpio),
> > + "Failed to get reset-gpios\n");
> > +
> > + sd = &tc358746->sd;
> > + v4l2_i2c_subdev_init(sd, client, &tc358746_ops);
> > + sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
> > + sd->entity.function = MEDIA_ENT_F_VID_IF_BRIDGE;
> > + sd->entity.ops = &tc358746_entity_ops;
> > +
> > + tc358746->pads[TC358746_SINK].flags = MEDIA_PAD_FL_SINK;
> > + tc358746->pads[TC358746_SOURCE].flags = MEDIA_PAD_FL_SOURCE;
> > + err = media_entity_pads_init(&sd->entity, TC358746_NR_PADS,
> > + tc358746->pads);
> > + if (err)
> > + return dev_err_probe(dev, err,
> > + "Failed to setup media-entity pads\n");
> > +
> > + ep = fwnode_graph_get_endpoint_by_id(dev_fwnode(dev), TC358746_SOURCE,
> > + 0, 0);
> > + if (!ep) {
> > + dev_err(dev, "Missing endpoint node\n");
> > + err = -EINVAL;
> > + goto err_mc;
> > + }
> > +
> > + /* Currently we only support 'parallel in' -> 'csi out' */
> > + vep = &tc358746->csi_vep;
> > + vep->bus_type = V4L2_MBUS_CSI2_DPHY;
> > + err = v4l2_fwnode_endpoint_alloc_parse(ep, vep);
> > + fwnode_handle_put(ep);
> > + if (err) {
> > + dev_err(dev, "Failed to parse source endpoint\n");
> > + goto err_mc;
> > + }
> > +
> > + csi_lanes = vep->bus.mipi_csi2.num_data_lanes;
> > + if (csi_lanes == 0 || csi_lanes > 4 ||
> > + vep->nr_of_link_frequencies == 0) {
> > + dev_err(dev, "error: Invalid CSI-2 settings\n");
> > + err = -EINVAL;
> > + goto err_vep;
> > + }
> > +
> > + /* TODO: Add support to handle multiple link frequencies */
> > + csi_link_rate = (unsigned long)vep->link_frequencies[0];
> > + tc358746->pll_rate = tc358746_find_pll_settings(tc358746, refclk,
> > + csi_link_rate * 2);
> > + if (!tc358746->pll_rate) {
> > + err = -EINVAL;
> > + goto err_vep;
> > + }
> > +
> > + err = phy_mipi_dphy_get_default_config_for_hsclk(tc358746->pll_rate,
> > + csi_lanes,
> > + &tc358746->dphy_cfg);
> > + if (err)
> > + goto err_vep;
> > +
> > + tc358746->mbusfmt = tc358746_def_fmt;
> > + tc358746->vb_size = TC358746_VB_DEFAULT_SIZE;
> > +
> > + dev_set_drvdata(dev, tc358746);
> > + pm_runtime_set_autosuspend_delay(dev, 200);
> > + pm_runtime_use_autosuspend(dev);
> > + pm_runtime_enable(dev);
> > +
> > + err = pm_runtime_resume_and_get(dev);
> > + if (err < 0) {
> > + dev_err(dev, "Failed to resume the device\n");
> > + goto err_vep;
> > + }
> > +
> > + /* Ensure that CSI interface is put into LP-11 state */
> > + err = tc358746_sw_reset(tc358746);
> > + if (err) {
> > + pm_runtime_put_noidle(dev);
> > + dev_err(dev, "Failed to reset the device\n");
> > + goto err_pm;
> > + }
> > +
> > + err = tc358746_read(tc358746, CHIPID_REG, &val);
> > + pm_runtime_mark_last_busy(dev);
> > + pm_runtime_put_sync_autosuspend(dev);
> > + if (err) {
> > + dev_err(dev, "Failed to read chipid\n");
> > + err = -ENODEV;
> > + goto err_pm;
> > + }
> > +
> > + if (FIELD_GET(CHIPID, val) != 0x44) {
> > + dev_err(dev, "Invalid chipid 0x%02x\n",
> > + (u32)FIELD_GET(CHIPID, val));
> > + err = -ENODEV;
> > + goto err_pm;
> > + }
> > +
> > + /* Optional MCLK provider support */
> > + if (device_property_present(dev, "#clock-cells")) {
> > + const char *mclk_name;
> > +
> > + /* Init to highest possibel MCLK */
> > + tc358746->mclk_postdiv = 512;
> > + tc358746->mclk_prediv = 8;
> > +
> > + mclk_name = "tc358746-mclk";
> > + device_property_read_string(dev, "clock-output-names",
> > + &mclk_name);
> > +
> > + mclk_initdata.name = mclk_name;
> > + mclk_initdata.ops = &tc358746_mclk_ops;
> > + tc358746->mclk_hw.init = &mclk_initdata;
> > +
> > + err = devm_clk_hw_register(dev, &tc358746->mclk_hw);
> > + if (err) {
> > + dev_err(dev, "Failed to register mclk provider\n");
> > + goto err_pm;
> > + }
> > +
> > + err = devm_of_clk_add_hw_provider(dev, of_clk_hw_simple_get,
> > + &tc358746->mclk_hw);
> > + if (err) {
> > + dev_err(dev, "Failed to add mclk provider\n");
> > + goto err_pm;
> > + }
> > + }
> > +
> > + v4l2_ctrl_handler_init(&tc358746->ctrl_hdl, 1);
> > +
> > + ctrl = v4l2_ctrl_new_int_menu(&tc358746->ctrl_hdl, NULL,
> > + V4L2_CID_LINK_FREQ, 0, 0,
> > + vep->link_frequencies);
> > + if (ctrl)
> > + ctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY;
> > +
> > + tc358746->sd.ctrl_handler = &tc358746->ctrl_hdl;
> > + if (tc358746->ctrl_hdl.error) {
> > + err = tc358746->ctrl_hdl.error;
> > + goto err_pm;
> > + }
> > +
> > + v4l2_ctrl_handler_setup(&tc358746->ctrl_hdl);
> > +
> > + err = tc358746_async_register(tc358746);
> > + if (err < 0)
> > + goto err_ctrl;
> > +
> > + dev_info(dev, "%s found @ 0x%x (%s)\n", client->name,
> > + client->addr, client->adapter->name);
>
> I'd skip this to avoid adding noise to the kernel log at boot time. I
> would also probably split some of the code out of the probe function as
> it's fairly large. Up to you.
Yes it is large but most of it is just requesting stuff and so..
Therefore I kept it here since I don't need it elsewhere. What about
setting it to dev_dbg()? Sometimes it can be useful e.g. to find the
problem why /dev/media is not comming up..
> > +
> > + return 0;
> > +
> > +err_ctrl:
> > + v4l2_ctrl_handler_free(&tc358746->ctrl_hdl);
> > +err_pm:
> > + pm_runtime_disable(dev);
> > + pm_runtime_set_suspended(dev);
> > + pm_runtime_dont_use_autosuspend(dev);
> > +err_vep:
> > + v4l2_fwnode_endpoint_free(vep);
> > +err_mc:
> > + media_entity_cleanup(&sd->entity);
> > +
> > + return err;
> > +}
> > +
> > +static int tc358746_remove(struct i2c_client *client)
> > +{
> > + struct v4l2_subdev *sd = i2c_get_clientdata(client);
> > + struct tc358746 *tc358746 = to_tc358746(sd);
> > +
> > + v4l2_ctrl_handler_free(&tc358746->ctrl_hdl);
> > + v4l2_fwnode_endpoint_free(&tc358746->csi_vep);
> > + v4l2_async_nf_unregister(&tc358746->notifier);
> > + v4l2_async_nf_cleanup(&tc358746->notifier);
> > + v4l2_async_unregister_subdev(sd);
> > + v4l2_device_unregister_subdev(sd);
>
> This shouldn't be needed v4l2_async_unregister_subdev() should be
> enough.
Okay, thanks. There are a lot of unregister helpers in the v4l2 space..
>
> > + media_entity_cleanup(&sd->entity);
> > +
> > + pm_runtime_disable(sd->dev);
> > + pm_runtime_set_suspended(sd->dev);
> > + pm_runtime_dont_use_autosuspend(sd->dev);
> > +
> > + return 0;
> > +}
> > +
> > +static int tc358746_suspend(struct device *dev)
> > +{
> > + struct tc358746 *tc358746 = dev_get_drvdata(dev);
> > +
> > + clk_disable_unprepare(tc358746->refclk);
> > +
> > + return regulator_bulk_disable(ARRAY_SIZE(tc358746_supplies),
> > + tc358746->supplies);
>
> Shouldn't you reenable the clock if this fails ?
Hm.. if this fails I could end in a undefined chip state. But I got the
point that the framework would be in a bad state if it tries again to
suspend the device.
> > +}
> > +
> > +static int tc358746_resume(struct device *dev)
> > +{
> > + struct tc358746 *tc358746 = dev_get_drvdata(dev);
> > + int err;
> > +
> > + gpiod_set_value(tc358746->reset_gpio, 1);
> > +
> > + err = regulator_bulk_enable(ARRAY_SIZE(tc358746_supplies),
> > + tc358746->supplies);
> > + if (err)
> > + return err;
> > +
> > + /* min. 200ns */
> > + usleep_range(10, 20);
> > +
> > + gpiod_set_value(tc358746->reset_gpio, 0);
> > +
> > + err = clk_prepare_enable(tc358746->refclk);
> > + if (err)
> > + return err;
>
> The regulators need to be disabled in case of failure here and below
> (and so does the clock below).
Yes, you're right.
> > +
> > + /* min. 700us ... 1ms */
> > + usleep_range(1000, 1500);
> > +
> > + /* Sync state */
> > + err = tc358746_apply_pll_config(tc358746);
> > + if (err)
> > + return err;
> > +
> > + err = tc358746_apply_dphy_config(tc358746);
> > + if (err)
> > + return err;
> > +
> > + return tc358746_apply_misc_config(tc358746);
>
> Does all this belong to the PM resume handler ? It seems configuration
> could be handled in .s_stream() instead.
This gets called by the s_stream() during getting the power state but I
can move the dphy/misc_config to the .s_stream() of course. The pll
needs to be there since the device can be a clock provider e.g. for the
sensor.
Thanks for the review :)
Regards,
Marco
> > +}
> > +
> > +DEFINE_RUNTIME_DEV_PM_OPS(tc358746_pm_ops, tc358746_suspend,
> > + tc358746_resume, NULL);
> > +
> > +static const struct of_device_id __maybe_unused tc358746_of_match[] = {
> > + { .compatible = "toshiba,tc358746" },
> > + { },
> > +};
> > +MODULE_DEVICE_TABLE(of, tc358746_of_match);
> > +
> > +static struct i2c_driver tc358746_driver = {
> > + .driver = {
> > + .name = "tc358746",
> > + .pm = pm_ptr(&tc358746_pm_ops),
> > + .of_match_table = tc358746_of_match,
> > + },
> > + .probe_new = tc358746_probe,
> > + .remove = tc358746_remove,
> > +};
> > +
> > +module_i2c_driver(tc358746_driver);
> > +
> > +MODULE_DESCRIPTION("Toshiba TC358746 Parallel to CSI-2 bridge driver");
> > +MODULE_AUTHOR("Marco Felsch <kernel@...gutronix.de>");
> > +MODULE_LICENSE("GPL");
>
> --
> Regards,
>
> Laurent Pinchart
>
Powered by blists - more mailing lists