[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220916102340.11520-10-johan+linaro@kernel.org>
Date: Fri, 16 Sep 2022 12:23:38 +0200
From: Johan Hovold <johan+linaro@...nel.org>
To: Vinod Koul <vkoul@...nel.org>
Cc: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>,
Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...ainline.org>,
Kishon Vijay Abraham I <kishon@...com>,
linux-arm-msm@...r.kernel.org, linux-phy@...ts.infradead.org,
linux-kernel@...r.kernel.org,
Johan Hovold <johan+linaro@...nel.org>
Subject: [PATCH v2 09/11] phy: qcom-qmp-combo: drop unused legacy DT workaround
Commit 5e17b95d9893 ("phy: qcom-qmp: Utilize fully-specified DT
registers") added a workaround for legacy devicetrees which did not
specify register regions for the second lane of some dual-lane PHYs.
At the time, the only two dual-lane PHYs supported by mainline were
"qcom,sdm845-qmp-usb3-phy" and "qcom,sdm845-qmp-ufs-phy", neither
of which is a combo PHY.
Drop the workaround for malformed devicetrees, which should no longer be
needed since the QMP driver split.
Signed-off-by: Johan Hovold <johan+linaro@...nel.org>
---
drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 27 +++++------------------
1 file changed, 6 insertions(+), 21 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index 1d55892c6575..b5dde7f06ea9 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -66,9 +66,6 @@
#define POWER_DOWN_DELAY_US_MIN 10
#define POWER_DOWN_DELAY_US_MAX 11
-/* Define the assumed distance between lanes for underspecified device trees. */
-#define QMP_PHY_LEGACY_LANE_STRIDE 0x400
-
struct qmp_phy_init_tbl {
unsigned int offset;
unsigned int val;
@@ -2729,28 +2726,16 @@ static int qmp_combo_create(struct device *dev, struct device_node *np, int id,
if (cfg->pcs_usb_offset)
qphy->pcs_usb = qphy->pcs + cfg->pcs_usb_offset;
- /*
- * If this is a dual-lane PHY, then there should be registers for the
- * second lane. Some old device trees did not specify this, so fall
- * back to old legacy behavior of assuming they can be reached at an
- * offset from the first lane.
- */
if (cfg->is_dual_lane_phy) {
qphy->tx2 = devm_of_iomap(dev, np, 3, NULL);
- qphy->rx2 = devm_of_iomap(dev, np, 4, NULL);
- if (IS_ERR(qphy->tx2) || IS_ERR(qphy->rx2)) {
- dev_warn(dev,
- "Underspecified device tree, falling back to legacy register regions\n");
+ if (IS_ERR(qphy->tx2))
+ return PTR_ERR(qphy->tx2);
- /* In the old version, pcs_misc is at index 3. */
- qphy->pcs_misc = qphy->tx2;
- qphy->tx2 = qphy->tx + QMP_PHY_LEGACY_LANE_STRIDE;
- qphy->rx2 = qphy->rx + QMP_PHY_LEGACY_LANE_STRIDE;
-
- } else {
- qphy->pcs_misc = devm_of_iomap(dev, np, 5, NULL);
- }
+ qphy->rx2 = devm_of_iomap(dev, np, 4, NULL);
+ if (IS_ERR(qphy->rx2))
+ return PTR_ERR(qphy->rx2);
+ qphy->pcs_misc = devm_of_iomap(dev, np, 5, NULL);
} else {
qphy->pcs_misc = devm_of_iomap(dev, np, 3, NULL);
}
--
2.35.1
Powered by blists - more mailing lists