lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <cover.1663827071.git.rtanwar@maxlinear.com>
Date:   Thu, 22 Sep 2022 14:24:23 +0800
From:   Rahul Tanwar <rtanwar@...linear.com>
To:     <sboyd@...nel.org>, <mturquette@...libre.com>,
        <linux-clk@...r.kernel.org>
CC:     <linux-kernel@...r.kernel.org>, <linux-lgm-soc@...linear.com>,
        "Rahul Tanwar" <rtanwar@...linear.com>
Subject: [PATCH RESEND v2 0/5] Modify MxL's CGU clk driver to make it secure boot compatible

* Rebase on latest 6.0 clk linux tree and resend patch series because of
  no response from anyone so far. Please let me know if anyone has any
  concerns about these changes. Thanks.

MxL's CGU driver was found to be lacking below required features. Add these
required lacking features:

1. Since it is a core driver, it has to conform to secure boot & secure
   access architecture. In order for the register accesses to be secure
   access compliant, it needs regmap support as per our security architecture.
   Hence, replace direct read/writel with regmap based IO. Also remove spinlocks
   because they are no longer necessary because regmap uses its own lock.

2. There are some gate clocks which are used by the power mgmt IP to gate when
   a certain power saving mode is activated. These gate clocks can also be 
   gated from CGU clk driver. This creates a conflict. To avoid the conflict,
   by default disable gating such gate registers from CGU clk driver. But keep
   a flag to do so for other older IP's which uses same CGU clk IP but does not
   use same power mgmt IP.

3. Fix two functional bugs found during testing.

This patch series is based on below git tree:
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux.git


Rahul Tanwar (5):
  clk: mxl: Switch from direct readl/writel based IO to regmap based IO
  clk: mxl: Remove unnecessary spinlocks
  clk: mxl: Avoid disabling gate clocks from clk driver
  clk: mxl: Add validation for register reads/writes
  clk: mxl: Add a missing flag to allow parent clock rate change

 drivers/clk/x86/Kconfig       |   5 +-
 drivers/clk/x86/clk-cgu-pll.c |  23 ++-----
 drivers/clk/x86/clk-cgu.c     | 117 +++++++++++-----------------------
 drivers/clk/x86/clk-cgu.h     |  71 +++++++++++++--------
 drivers/clk/x86/clk-lgm.c     |  16 +++--
 5 files changed, 101 insertions(+), 131 deletions(-)

-- 
2.17.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ