| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <51c98dd6-5897-6e8b-303c-270e946568f0@huawei.com>
Date: Fri, 23 Sep 2022 16:43:43 +0800
From: Li Huafei <lihuafei1@...wei.com>
To: "Masami Hiramatsu (Google)" <mhiramat@...nel.org>
CC: <guoren@...nel.org>, <palmer@...belt.com>, <rostedt@...dmis.org>,
<mingo@...hat.com>, <paul.walmsley@...ive.com>,
<aou@...s.berkeley.edu>, <naveen.n.rao@...ux.ibm.com>,
<anil.s.keshavamurthy@...el.com>, <davem@...emloft.net>,
<jszhang@...nel.org>, <peterz@...radead.org>,
<liaochang1@...wei.com>, <me@...ki.ch>, <penberg@...nel.org>,
<linux-riscv@...ts.infradead.org>, <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH RESEND v2 2/2] riscv: kprobe: Allow coexistence of ftrace
and kprobe
Hi Masami,
Thanks for your comment and sorry for the late reply.
On 2022/9/10 11:25, Masami Hiramatsu (Google) wrote:
> Hi Li,
>
> On Fri, 9 Sep 2022 10:36:25 +0800
> Li Huafei <lihuafei1@...wei.com> wrote:
>
>> When using ftrace and kprobe at the same time, it was found that one
>> might cause the other to be unavailable. This can be reproduced by the
>> following steps.
>
> Yes, this must be solved by CONFIG_HAVE_KPROBES_ON_FTRACE.
>
>>
>> # cd /sys/kernel/debug/tracing/
>> # echo cmdline_proc_show > set_ftrace_filter
>> # echo function > current_tracer
>> # echo 'p cmdline_proc_show' > kprobe_events
>> # echo 'p cmdline_proc_show+4' >> kprobe_events
>> # ls events/kprobes/
>> enable p_cmdline_proc_show_0
>> filter p_cmdline_proc_show_4
>> # echo 1 > events/kprobes/p_cmdline_proc_show_4/enable
>> # echo 1 > events/kprobes/p_cmdline_proc_show_0/enable
>> [ 129.830108] 00000000ebed457d: expected (ffdb0097 4f0080e7) but got (00100073 4f0080e7)
>> [ 129.835990] ------------[ ftrace bug ]------------
>> [ 129.839510] ftrace failed to modify
>> [ 129.839536] [<ffffffff80258910>] cmdline_proc_show+0x0/0x46
>> [ 129.845831] actual: 23:3c:11:fe:73:00:10:00
>> [ 129.849299] Updating ftrace call site to call a different ftrace function
>> [ 129.853998] ftrace record flags: e0000002
>> [ 129.856771] (2) R
>> [ 129.856771] expected tramp: ffffffff80008e60
>> [ 129.861688] ------------[ cut here ]------------
>> [ 129.865092] WARNING: CPU: 0 PID: 14 at kernel/trace/ftrace.c:2085 ftrace_bug+0x21a/0x24c
>> [ 129.870949] Modules linked in:
>> [ 129.873301] CPU: 0 PID: 14 Comm: migration/0 Not tainted 5.18.0-rc3-00002-gd8bfcd250f58 #6
>> [ 129.879217] Hardware name: riscv-virtio,qemu (DT)
>> [ 129.882666] Stopper: multi_cpu_stop+0x0/0x168 <- stop_machine_cpuslocked+0xfa/0x12e
>> [ 129.888430] epc : ftrace_bug+0x21a/0x24c
>> [ 129.891254] ra : ftrace_bug+0x21a/0x24c
>> [ 129.894057] epc : ffffffff807c3bee ra : ffffffff807c3bee sp : ff20000000283c80
>> [ 129.899144] gp : ffffffff813a83b8 tp : ff60000080021600 t0 : ffffffff804155c0
>> [ 129.904257] t1 : 0720072007200720 t2 : 7420646574636570 s0 : ff20000000283cb0
>> [ 129.909402] s1 : ff6000007fe622a0 a0 : 0000000000000022 a1 : c0000000ffffefff
>> [ 129.914472] a2 : 0000000000000001 a3 : 0000000000000000 a4 : 341adec112294700
>> [ 129.919487] a5 : 341adec112294700 a6 : 0000000000000730 a7 : 0000000000000030
>> [ 129.924595] s2 : ffffffff80258910 s3 : ffffffffffffffea s4 : 0000000000000000
>> [ 129.929776] s5 : 0000000000000a35 s6 : ffffffff80d667c8 s7 : ff6000007fe04000
>> [ 129.934892] s8 : 0000000000000004 s9 : 0000000000000002 s10: 0000000000000001
>> [ 129.939992] s11: 0000000000000003 t3 : ff6000007ff20f00 t4 : ff6000007ff20f00
>> [ 129.945134] t5 : ff6000007ff20000 t6 : ff200000002839c8
>> [ 129.948838] status: 0000000000000100 badaddr: 0000000000000000 cause: 0000000000000003
>> [ 129.954580] [<ffffffff800bf110>] ftrace_replace_code+0xce/0xd0
>> [ 129.958771] [<ffffffff800bf280>] ftrace_modify_all_code+0xb4/0x12c
>> [ 129.964420] [<ffffffff800bf30a>] __ftrace_modify_code+0x12/0x1c
>> [ 129.969163] [<ffffffff800b4ea4>] multi_cpu_stop+0x9a/0x168
>> [ 129.973035] [<ffffffff800b4b1c>] cpu_stopper_thread+0xb4/0x15e
>> [ 129.977205] [<ffffffff8003457a>] smpboot_thread_fn+0x106/0x1e4
>> [ 129.981277] [<ffffffff80030ca6>] kthread+0xee/0x108
>> [ 129.984763] [<ffffffff800039ba>] ret_from_exception+0x0/0xc
>> [ 129.988809] ---[ end trace 0000000000000000 ]---
>> # cat trace
>> # tracer: function
>> #
>> # WARNING: FUNCTION TRACING IS CORRUPTED
>> # MAY BE MISSING FUNCTION EVENTS
>> # entries-in-buffer/entries-written: 0/0 #P:4
>> #
>> # _-----=> irqs-off/BH-disabled
>> # / _----=> need-resched
>> # | / _---=> hardirq/softirq
>> # || / _--=> preempt-depth
>> # ||| / _-=> migrate-disable
>> # |||| / delay
>> # TASK-PID CPU# ||||| TIMESTAMP FUNCTION
>> # | | | ||||| | |
>>
>> As you can see, the ftrace functionality is broken. This is because
>> DYNAMIC_FTRACE uses 4 instructions to make the jump from the function
>> entry to the ftrace trampoline.
>>
>> After 'echo function > current_tracer':
>>
>> <cmdline_proc_show>:
>> 0xffffffff80258910 <+0>: sd ra,-8(sp)
>> 0xffffffff80258914 <+4>: auipc ra,0xffdb0
>> 0xffffffff80258918 <+8>: jalr 1264(ra) # 0xffffffff80008e04 <ftrace_caller>
>> 0xffffffff8025891c <+12>: ld ra,-8(sp)
>>
>> After 'echo 1 > events/kprobes/p_cmdline_proc_show_4/enable':
>>
>> <cmdline_proc_show>:
>> 0xffffffff80258910 <+0>: sd ra,-8(sp)
>> 0xffffffff80258914 <+4>: ebreak
>> 0xffffffff80258918 <+8>: jalr 1264(ra)
>> 0xffffffff8025891c <+12>: ld ra,-8(sp)
>>
>> This time the second instruction is replaced with a breakpoint
>> instruction and the ftrace-related instructions are broken. Then, when
>> enabling 'p_cmdline_proc_show_0', a regs ftrace handler is registered
>> based on KPROBES_ON_FTRACE, ftrace_modify_call() changes 'ftrace_caller'
>> to 'ftrace_regs_caller', and checks for ftrace-related instructions is
>> modified or not. Here it has been modified, causing ftrace to report a
>> warning and disable itself.
>>
>> In turn, the breakpoints inserted by kprobe may be overwritten by
>> ftrace.
>
> In this case, we should NOT probe such address by kprobes. The reason
> why I introduce the CONFIG_KPROBES_ON_FTRACE is to avoid this issue.
>
Yes, I think CONFIG_KPROBES_ON_FTRACE is mainly intended to solve the
problem of coexistence with ftrace and not just as an optimization.
>
>>
>> The problem is that we think that only the first instruction address at
>> the function entry is needed for ftrace, but it is actually the first 4.
>> As Masami mentioned in [1], we can treat the first 4 instructions as a
>> 16-byte virtual instruction, and func+4, func+8 and func+12 will be
>> changed to func+0. This way, ftrace and kprobe do not bother each other
>> and can coexist.
>>
>> After this patch:
>>
>> # cd /sys/kernel/debug/tracing/
>> # echo cmdline_proc_show > set_ftrace_filter
>> # echo function > current_tracer
>> # echo 'p cmdline_proc_show' > kprobe_events
>> # echo 'p cmdline_proc_show+4' >> kprobe_events
>> # echo 'p cmdline_proc_show+8' >> kprobe_events
>> # echo 'p cmdline_proc_show+12' >> kprobe_events
>> # echo 'p cmdline_proc_show+16' >> kprobe_events
>
> Oh, no, I meant, if it is a 16 byte virtual insturiction, it should
> reject probing the address inside the instruction. It is rejected as
> same as the case you probe "function+1" address (that is not an
> instruction boundary, right?)
>
> So, it should reject it instead of modifying the probed address. (Return
> -EILSEQ) It is usual there is any instruction which can not be probed.
>
> Or, is there any real reason you "have to" probe such intermediate
> address?
No. In fact in my first version of the patch(see [1]),
arch_adjust_kprobe_addr() returned -EILSEQ when probing intermediate
addresses. but Guo pointed out that I changed the API and it did.
Currently there are x86 & powerpc using their own arch_adjust_kprobe_addr().
On x86, when X86_KERNEL_IBT is enabled, arch_adjust_kprobe_addr()
adjusts sym+0 (endbr) to sym+4 (ftrace location). If we probe through
kprobe_events, we get:
# cd /sys/kernel/debug/tracing/
# echo 'p cmdline_proc_show' > kprobe_events
# echo 'p cmdline_proc_show+4' >> kprobe_events
# ls events/kprobes/
enable p_cmdline_proc_show_0
filter p_cmdline_proc_show_4
# cat /sys/kernel/debug/kprobes/list
ffffffff812d31e4 k cmdline_proc_show+0x4 [DISABLED][FTRACE]
ffffffff812d31e4 k cmdline_proc_show+0x4 [DISABLED][FTRACE]
'/sys/kernel/debug/tracing/events/kprobes/' shows that we generated two
probe_events, but '/sys/kernel/debug/kprobes/list' shows that it is the
same address with two probes (aggr_kprobe).
The same is true for powerpc:
# cd /sys/kernel/debug/tracing/
# echo 'p cmdline_proc_show' > kprobe_events
# echo 'p cmdline_proc_show+12' >> kprobe_events
# ls events/kprobes/
enable p_cmdline_proc_show_0
filter p_cmdline_proc_show_12
# cat /sys/kernel/debug/kprobes/list
c000000000515c0c k cmdline_proc_show+0xc [DISABLED][FTRACE]
c000000000515c0c k cmdline_proc_show+0xc [DISABLED][FTRACE]
c0000000000508c0 k __kretprobe_trampoline+0x0 [OPTIMIZED]
So for kprobe, can we consider all instructions before the "real"
instruction of the function as a virtual instruction? And then refuse to
probe the intermediate address of this virtual instruction to avoid
ambiguity for the user here.
[1]
https://lore.kernel.org/lkml/20220426015751.88582-2-lihuafei1@huawei.com/
Thanks,
Huafei
>
> Thank you,
>
>> # ls events/kprobes/
>> enable p_cmdline_proc_show_12 p_cmdline_proc_show_8
>> filter p_cmdline_proc_show_16
>> p_cmdline_proc_show_0 p_cmdline_proc_show_4
>> # echo 1 > events/kprobes/enable
>> # cat ../kprobes/list
>> ffffffff8025cba4 k cmdline_proc_show+0x0 [FTRACE]
>> ffffffff8025cba4 k cmdline_proc_show+0x0 [FTRACE]
>> ffffffff8025cba4 k cmdline_proc_show+0x0 [FTRACE]
>> ffffffff8025cba4 k cmdline_proc_show+0x0 [FTRACE]
>> ffffffff8025cbb4 k cmdline_proc_show+0x10
>> # cat /proc/cmdline
>> nokaslr rootwait root=/dev/vda rw
>> # cat trace
>> # tracer: function
>> #
>> # entries-in-buffer/entries-written: 6/6 #P:4
>> #
>> # _-----=> irqs-off/BH-disabled
>> # / _----=> need-resched
>> # | / _---=> hardirq/softirq
>> # || / _--=> preempt-depth
>> # ||| / _-=> migrate-disable
>> # |||| / delay
>> # TASK-PID CPU# ||||| TIMESTAMP FUNCTION
>> # | | | ||||| | |
>> cat-144 [000] ...2. 179.164908: p_cmdline_proc_show_12: (cmdline_proc_show+0x0/0x46)
>> cat-144 [000] ...2. 179.165617: p_cmdline_proc_show_8: (cmdline_proc_show+0x0/0x46)
>> cat-144 [000] ...2. 179.165653: p_cmdline_proc_show_4: (cmdline_proc_show+0x0/0x46)
>> cat-144 [000] ...2. 179.165655: p_cmdline_proc_show_0: (cmdline_proc_show+0x0/0x46)
>> cat-144 [000] ...2. 179.165837: cmdline_proc_show <-seq_read_iter
>> cat-144 [000] d.... 179.166099: p_cmdline_proc_show_16: (cmdline_proc_show+0x10/0x46)
>>
>> [1] https://patchwork.kernel.org/project/linux-arm-kernel/patch/20191218140622.57bbaca5@xhacker.debian/
>>
>> Fixes: c22b0bcb1dd0 ("riscv: Add kprobes supported")
>> Suggested-by: Guo Ren <guoren@...nel.org>
>> Signed-off-by: Li Huafei <lihuafei1@...wei.com>
>> ---
>> v1: https://lore.kernel.org/lkml/20220426015751.88582-1-lihuafei1@huawei.com/
>> v2: https://lore.kernel.org/lkml/20220819025522.154189-2-lihuafei1@huawei.com/
>>
>> v2 RESEND:
>> - Rebase onto v6.0-rc4.
>>
>> Changlog in v1 -> v2:
>> - Allows probing func+offs(<16) instead of returning -EILSEQ, which
>> does not change the arch_adjust_kprobe_addr() interface convention.
>> - ftrace_location(addr) is unnecessary, consistent with powerpc and
>> x86.
>>
>> arch/riscv/include/asm/ftrace.h | 26 ++++++++++++++++++++++++++
>> arch/riscv/kernel/ftrace.c | 26 --------------------------
>> arch/riscv/kernel/probes/kprobes.c | 20 ++++++++++++++++++++
>> 3 files changed, 46 insertions(+), 26 deletions(-)
>>
>> diff --git a/arch/riscv/include/asm/ftrace.h b/arch/riscv/include/asm/ftrace.h
>> index 04dad3380041..c59e4a63f1c1 100644
>> --- a/arch/riscv/include/asm/ftrace.h
>> +++ b/arch/riscv/include/asm/ftrace.h
>> @@ -77,6 +77,32 @@ do { \
>> */
>> #define MCOUNT_INSN_SIZE 8
>>
>> +/*
>> + * Put 16 bytes at the front of the function within the patchable function
>> + * entry nops' area.
>> + *
>> + * 0: REG_S ra, -SZREG(sp)
>> + * 1: auipc ra, 0x?
>> + * 2: jalr -?(ra)
>> + * 3: REG_L ra, -SZREG(sp)
>> + *
>> + * So the opcodes is:
>> + * 0: 0xfe113c23 (sd)/0xfe112e23 (sw)
>> + * 1: 0x???????? -> auipc
>> + * 2: 0x???????? -> jalr
>> + * 3: 0xff813083 (ld)/0xffc12083 (lw)
>> + */
>> +#if __riscv_xlen == 64
>> +#define INSN0 0xfe113c23
>> +#define INSN3 0xff813083
>> +#elif __riscv_xlen == 32
>> +#define INSN0 0xfe112e23
>> +#define INSN3 0xffc12083
>> +#endif
>> +
>> +#define FUNC_ENTRY_SIZE 16
>> +#define FUNC_ENTRY_JMP 4
>> +
>> #ifndef __ASSEMBLY__
>> struct dyn_ftrace;
>> int ftrace_init_nop(struct module *mod, struct dyn_ftrace *rec);
>> diff --git a/arch/riscv/kernel/ftrace.c b/arch/riscv/kernel/ftrace.c
>> index 552088e9acc4..9d951aab662a 100644
>> --- a/arch/riscv/kernel/ftrace.c
>> +++ b/arch/riscv/kernel/ftrace.c
>> @@ -70,32 +70,6 @@ static int __ftrace_modify_call(unsigned long hook_pos, unsigned long target,
>> return 0;
>> }
>>
>> -/*
>> - * Put 16 bytes at the front of the function within the patchable function
>> - * entry nops' area.
>> - *
>> - * 0: REG_S ra, -SZREG(sp)
>> - * 1: auipc ra, 0x?
>> - * 2: jalr -?(ra)
>> - * 3: REG_L ra, -SZREG(sp)
>> - *
>> - * So the opcodes is:
>> - * 0: 0xfe113c23 (sd)/0xfe112e23 (sw)
>> - * 1: 0x???????? -> auipc
>> - * 2: 0x???????? -> jalr
>> - * 3: 0xff813083 (ld)/0xffc12083 (lw)
>> - */
>> -#if __riscv_xlen == 64
>> -#define INSN0 0xfe113c23
>> -#define INSN3 0xff813083
>> -#elif __riscv_xlen == 32
>> -#define INSN0 0xfe112e23
>> -#define INSN3 0xffc12083
>> -#endif
>> -
>> -#define FUNC_ENTRY_SIZE 16
>> -#define FUNC_ENTRY_JMP 4
>> -
>> int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
>> {
>> unsigned int call[4] = {INSN0, 0, 0, INSN3};
>> diff --git a/arch/riscv/kernel/probes/kprobes.c b/arch/riscv/kernel/probes/kprobes.c
>> index e6e950b7cf32..ef7aabec9681 100644
>> --- a/arch/riscv/kernel/probes/kprobes.c
>> +++ b/arch/riscv/kernel/probes/kprobes.c
>> @@ -21,6 +21,26 @@ DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk);
>> static void __kprobes
>> post_kprobe_handler(struct kprobe *, struct kprobe_ctlblk *, struct pt_regs *);
>>
>> +#ifdef CONFIG_DYNAMIC_FTRACE
>> +kprobe_opcode_t *arch_adjust_kprobe_addr(unsigned long addr, unsigned long offset,
>> + bool *on_func_entry)
>> +{
>> + /*
>> + * The first 4 instructions at the beginning of the ftraced function
>> + * are used as a jump to ftrace trampoline, which we can think of as
>> + * a 16-byte virtual instruction. func+4, func+8 and func+12 will be
>> + * changed to func+0. This allows the function entry to be probed with
>> + * the help of KPROBES_ON_FTRACE and does not break ftrace
>> + * functionality.
>> + */
>> + if (offset < FUNC_ENTRY_SIZE)
>> + offset = 0;
>> +
>> + *on_func_entry = !offset;
>> + return (kprobe_opcode_t *)(addr + offset);
>> +}
>> +#endif
>> +
>> static void __kprobes arch_prepare_ss_slot(struct kprobe *p)
>> {
>> unsigned long offset = GET_INSN_LENGTH(p->opcode);
>> --
>> 2.17.1
>>
>
>
Powered by blists - more mailing lists