linux-kernel - Re: [PATCH v5 08/13] ACPI: PM: Take wake IRQ into consideration when entering suspend-to-idle

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <CAJZ5v0gwU81_QX9JJSRyEVY9NABGxczYpp1w6OrOVGrJ8Xdmcg@mail.gmail.com>
Date:   Thu, 29 Sep 2022 12:06:29 +0200
From:   "Rafael J. Wysocki" <rafael@...nel.org>
To:     Raul Rangel <rrangel@...omium.org>
Cc:     "Rafael J. Wysocki" <rafael@...nel.org>,
        ACPI Devel Maling List <linux-acpi@...r.kernel.org>,
        linux-input <linux-input@...r.kernel.org>,
        Tim Van Patten <timvp@...gle.com>,
        Mika Westerberg <mika.westerberg@...ux.intel.com>,
        Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
        Dmitry Torokhov <dmitry.torokhov@...il.com>,
        "jingle.wu" <jingle.wu@....com.tw>,
        Hans de Goede <hdegoede@...hat.com>,
        Mario Limonciello <mario.limonciello@....com>,
        Linus Walleij <linus.walleij@...aro.org>,
        Len Brown <lenb@...nel.org>,
        Linux Kernel Mailing List <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v5 08/13] ACPI: PM: Take wake IRQ into consideration when
 entering suspend-to-idle

On Wed, Sep 28, 2022 at 11:10 PM Raul Rangel <rrangel@...omium.org> wrote:
>
> On Sat, Sep 24, 2022 at 11:00 AM Rafael J. Wysocki <rafael@...nel.org> wrote:
> >
> > On Wed, Sep 21, 2022 at 5:52 PM Raul E Rangel <rrangel@...omium.org> wrote:
> > >
> > > This change adds support for ACPI devices that use ExclusiveAndWake or
> > > SharedAndWake in their _CRS GpioInt definition (instead of using _PRW),
> > > and also provide power resources. Previously the ACPI subsystem had no
> > > idea if the device had a wake capable interrupt armed. This resulted
> > > in the ACPI device PM system placing the device into D3Cold, and thus
> > > cutting power to the device. With this change we will now query the
> > > _S0W method to figure out the appropriate wake capable D-state.
> > >
> > > Signed-off-by: Raul E Rangel <rrangel@...omium.org>
> > > ---
> > >
> > > Changes in v5:
> > > - Go back to using adev->wakeup.flags.valid to keep the diff cleaner
> > > - Fix a typo in comment
> > >
> > >  drivers/acpi/device_pm.c | 19 +++++++++++++++++--
> > >  1 file changed, 17 insertions(+), 2 deletions(-)
> > >
> > > diff --git a/drivers/acpi/device_pm.c b/drivers/acpi/device_pm.c
> > > index 9dce1245689ca2..3111fc426e04fd 100644
> > > --- a/drivers/acpi/device_pm.c
> > > +++ b/drivers/acpi/device_pm.c
>
> > > @@ -681,8 +681,23 @@ static int acpi_dev_pm_get_state(struct device *dev, struct acpi_device *adev,
> > >                 d_min = ret;
> > >                 wakeup = device_may_wakeup(dev) && adev->wakeup.flags.valid
> > >                         && adev->wakeup.sleep_state >= target_state;
> Just an FYI, I didn't update the code that handles the target state >
> S0. I need to get a
> device that has S3 capabilities and the correct firmware to test this.
> I figure I can do
> that as a different patch when I have time to test with an S3 device.

That's fine.

> > > -       } else {
> > > -               wakeup = adev->wakeup.flags.valid;
> > > +       } else if (adev->wakeup.flags.valid) {
> > > +               /* ACPI GPE specified in _PRW. */
> > > +               wakeup = true;
>
> >
> > I would retain the "else" clause as it was and just add a new "else
> > if" one before it.
> >
> Done

Thanks!

> > > +       } else if (device_may_wakeup(dev) && dev->power.wakeirq) {
> > > +               /*
> > > +                * The ACPI subsystem doesn't manage the wake bit for IRQs
> > > +                * defined with ExclusiveAndWake and SharedAndWake. Instead we
> > > +                * expect them to be managed via the PM subsystem. Drivers
> > > +                * should call dev_pm_set_wake_irq to register an IRQ as a wake
> > > +                * source.
> > > +                *
> > > +                * If a device has a wake IRQ attached we need to check the
> > > +                * _S0W method to get the correct wake D-state. Otherwise we
> > > +                * end up putting the device into D3Cold which will more than
> > > +                * likely disable wake functionality.
> > > +                */
> > > +               wakeup = true;
> > >         }
> > >
> > >         /*
> > > --
>
> I'll send out v6 soon unless anyone else has any comments.