[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20221009221912.1217372-30-sashal@kernel.org>
Date: Sun, 9 Oct 2022 18:18:55 -0400
From: Sasha Levin <sashal@...nel.org>
To: linux-kernel@...r.kernel.org, stable@...r.kernel.org
Cc: "Russell King (Oracle)" <rmk+kernel@...linux.org.uk>,
Jakub Kicinski <kuba@...nel.org>,
Sasha Levin <sashal@...nel.org>, linux@...linux.org.uk,
andrew@...n.ch, hkallweit1@...il.com, davem@...emloft.net,
edumazet@...gle.com, pabeni@...hat.com, netdev@...r.kernel.org
Subject: [PATCH AUTOSEL 5.15 30/46] net: sfp: re-implement soft state polling setup
From: "Russell King (Oracle)" <rmk+kernel@...linux.org.uk>
[ Upstream commit 8475c4b70b040f9d8cbc308100f2c4d865f810b3 ]
Re-implement the decision making for soft state polling. Instead of
generating the soft state mask in sfp_soft_start_poll() by looking at
which GPIOs are available, record their availability in
sfp_sm_mod_probe() in sfp->state_hw_mask.
This will then allow us to clear bits in sfp->state_hw_mask in module
specific quirks when the hardware signals should not be used, thereby
allowing us to switch to using the software state polling.
Signed-off-by: Russell King (Oracle) <rmk+kernel@...linux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@...nel.org>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
drivers/net/phy/sfp.c | 38 ++++++++++++++++++++++++++------------
1 file changed, 26 insertions(+), 12 deletions(-)
diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c
index 028a5df5c538..e5cbd5b117cc 100644
--- a/drivers/net/phy/sfp.c
+++ b/drivers/net/phy/sfp.c
@@ -234,6 +234,7 @@ struct sfp {
bool need_poll;
struct mutex st_mutex; /* Protects state */
+ unsigned int state_hw_mask;
unsigned int state_soft_mask;
unsigned int state;
struct delayed_work poll;
@@ -499,17 +500,18 @@ static void sfp_soft_set_state(struct sfp *sfp, unsigned int state)
static void sfp_soft_start_poll(struct sfp *sfp)
{
const struct sfp_eeprom_id *id = &sfp->id;
+ unsigned int mask = 0;
sfp->state_soft_mask = 0;
- if (id->ext.enhopts & SFP_ENHOPTS_SOFT_TX_DISABLE &&
- !sfp->gpio[GPIO_TX_DISABLE])
- sfp->state_soft_mask |= SFP_F_TX_DISABLE;
- if (id->ext.enhopts & SFP_ENHOPTS_SOFT_TX_FAULT &&
- !sfp->gpio[GPIO_TX_FAULT])
- sfp->state_soft_mask |= SFP_F_TX_FAULT;
- if (id->ext.enhopts & SFP_ENHOPTS_SOFT_RX_LOS &&
- !sfp->gpio[GPIO_LOS])
- sfp->state_soft_mask |= SFP_F_LOS;
+ if (id->ext.enhopts & SFP_ENHOPTS_SOFT_TX_DISABLE)
+ mask |= SFP_F_TX_DISABLE;
+ if (id->ext.enhopts & SFP_ENHOPTS_SOFT_TX_FAULT)
+ mask |= SFP_F_TX_FAULT;
+ if (id->ext.enhopts & SFP_ENHOPTS_SOFT_RX_LOS)
+ mask |= SFP_F_LOS;
+
+ // Poll the soft state for hardware pins we want to ignore
+ sfp->state_soft_mask = ~sfp->state_hw_mask & mask;
if (sfp->state_soft_mask & (SFP_F_LOS | SFP_F_TX_FAULT) &&
!sfp->need_poll)
@@ -523,10 +525,11 @@ static void sfp_soft_stop_poll(struct sfp *sfp)
static unsigned int sfp_get_state(struct sfp *sfp)
{
- unsigned int state = sfp->get_state(sfp);
+ unsigned int soft = sfp->state_soft_mask & (SFP_F_LOS | SFP_F_TX_FAULT);
+ unsigned int state;
- if (state & SFP_F_PRESENT &&
- sfp->state_soft_mask & (SFP_F_LOS | SFP_F_TX_FAULT))
+ state = sfp->get_state(sfp) & sfp->state_hw_mask;
+ if (state & SFP_F_PRESENT && soft)
state |= sfp_soft_get_state(sfp);
return state;
@@ -1940,6 +1943,15 @@ static int sfp_sm_mod_probe(struct sfp *sfp, bool report)
if (ret < 0)
return ret;
+ /* Initialise state bits to use from hardware */
+ sfp->state_hw_mask = SFP_F_PRESENT;
+ if (sfp->gpio[GPIO_TX_DISABLE])
+ sfp->state_hw_mask |= SFP_F_TX_DISABLE;
+ if (sfp->gpio[GPIO_TX_FAULT])
+ sfp->state_hw_mask |= SFP_F_TX_FAULT;
+ if (sfp->gpio[GPIO_LOS])
+ sfp->state_hw_mask |= SFP_F_LOS;
+
if (!memcmp(id.base.vendor_name, "ALCATELLUCENT ", 16) &&
!memcmp(id.base.vendor_pn, "3FE46541AA ", 16))
sfp->module_t_start_up = T_START_UP_BAD_GPON;
@@ -2565,6 +2577,8 @@ static int sfp_probe(struct platform_device *pdev)
return PTR_ERR(sfp->gpio[i]);
}
+ sfp->state_hw_mask = SFP_F_PRESENT;
+
sfp->get_state = sfp_gpio_get_state;
sfp->set_state = sfp_gpio_set_state;
--
2.35.1
Powered by blists - more mailing lists