linux-kernel - Re: [PATCH 06/11] dt-bindings: thermal: k3-j72xx: conditionally require efuse reg range

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <166558062789.1936784.4988511846855638539.robh@kernel.org>
Date:   Wed, 12 Oct 2022 08:19:39 -0500
From:   Rob Herring <robh@...nel.org>
To:     Bryan Brattlof <bb@...com>
Cc:     Nishanth Menon <nm@...com>,
        Daniel Lezcano <daniel.lezcano@...aro.org>,
        Zhang Rui <rui.zhang@...el.com>,
        Amit Kucheria <amitk@...nel.org>,
        Linux Device Tree <devicetree@...r.kernel.org>,
        Tero Kristo <kristo@...nel.org>,
        "Rafael J. Wysocki" <rafael@...nel.org>,
        Keerthy <j-keerthy@...com>,
        Linux Thermal <linux-pm@...r.kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Rob Herring <robh+dt@...nel.org>,
        LKML <linux-kernel@...r.kernel.org>,
        Vignesh Raghavendra <vigneshr@...com>,
        Linux ARM <linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH 06/11] dt-bindings: thermal: k3-j72xx: conditionally require efuse reg range

On Tue, 11 Oct 2022 18:17:22 -0500, Bryan Brattlof wrote:
> Only some of TI's J721E SoCs will need a eFuse register range mapped to
> determine if they're affected by TI's i2128 erratum. All other SoC will
> not need this eFuse range to be mapped to function properly
> 
> Update the bindings for the k3_j72xx_bandgap thermal driver so other
> devices will only need to define two register ranges
> 
> Signed-off-by: Bryan Brattlof <bb@...com>
> ---
>  .../bindings/thermal/ti,j72xx-thermal.yaml    | 34 +++++++++++++------
>  1 file changed, 24 insertions(+), 10 deletions(-)
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/thermal/ti,j72xx-thermal.example.dtb: thermal-sensor@...40000: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+'
	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/thermal/ti,j72xx-thermal.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.