[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAL_JsqLKCgW439gUTtXux+_i5ZLwoEF3SzjSg2V27-QpY9EqUA@mail.gmail.com>
Date: Tue, 18 Oct 2022 08:52:35 -0500
From: Rob Herring <robh@...nel.org>
To: Conor Dooley <conor.dooley@...rochip.com>
Cc: Rafał Miłecki <zajec5@...il.com>,
Rafał Miłecki <rafal@...ecki.pl>,
William Zhang <william.zhang@...adcom.com>,
Srinivas Kandagatla <srinivas.kandagatla@...aro.org>,
Joel Peshkin <joel.peshkin@...adcom.com>,
Florian Fainelli <f.fainelli@...il.com>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
bcm-kernel-feedback-list@...adcom.com,
linux-arm-kernel@...ts.infradead.org,
Tom Rini <trini@...sulko.com>, u-boot@...ts.denx.de,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH V2] dt-bindings: nvmem: u-boot,env: add Broadcom's variant binding
On Tue, Oct 18, 2022 at 5:19 AM Conor Dooley <conor.dooley@...rochip.com> wrote:
>
> On Fri, Oct 14, 2022 at 04:09:40PM -0500, Rob Herring wrote:
> > On Fri, 30 Sep 2022 18:36:31 +0200, Rafał Miłecki wrote:
> > > From: Rafał Miłecki <rafal@...ecki.pl>
> > >
> > > Broadcom uses U-Boot for a lot of their bcmbca familiy chipsets. U-Boot
> > > stores its configuration in an environment data block.
> > >
> > > Such blocks are usually stored on flash as a separated partition at
> > > hardcoded address. Broadcom however decided to:
> > > 1. Store env data block inside U-Boot partition
> > > 2. Avoid sticking to hardcoded offsets
> > > 3. Use custom header with "uEnv" magic and env data length
> > >
> > > Example (length 0x4000):
> > > $ hexdump -n 32 -C -s 0x40000 /dev/mtdblock0
> > > 00040000 76 6e 45 75 00 40 00 00 34 89 7a 82 49 4d 41 47 |vnEu.@....z.IMAG|
> > > 00040010 45 3d 4e 41 4e 44 3a 31 4d 2c 31 30 32 34 4d 00 |E=NAND:1M,1024M.|
> > > (0x40000 offset is unit specific and can change)
> > >
> > > Starting with the commit 118f3fbe517f4 ("dt-bindings: mtd: partitions:
> > > support label/name only partition") DT can describe partitions matching
> > > them by a name (without specifying actual address). With that feature
> > > and this binding change it's possible to:
> > > 1. Specify DT node for Broadcom's U-Boot env data subpartition
> > > 2. Add nodes for specific environment data variables
> > > 3. Reference them as NVMEM cells
> > >
> > > This binding is unlikely to help Broadcom's U-Boot. U-Boot SPL needs to
> > > find environment data early (before it accesses DTB) and it does that by
> > > looking for an "uEnv" magic. Dirty way.
> > >
> > > This binding can however be used by operating systems. It allows
> > > describing cleanly U-Boot, its env data and variables. It tells
> > > operating system about Broadcom-specific env data so it can parse it.
> > >
> > > Signed-off-by: Rafał Miłecki <rafal@...ecki.pl>
> > > ---
> > > V2: Work on better commit body & add example
> > > ---
> > > .../devicetree/bindings/nvmem/u-boot,env.yaml | 21 +++++++++++++++++++
> > > 1 file changed, 21 insertions(+)
> > >
> >
> > Applied, thanks!
>
> Hey Rob,
> Maybe my tooling is out of date or w/e but this is breaking
> dt_binding_check for me.
>
> I applied the below to fix the build, which I was about to send, before
> realising that you'd applied it and wondered if I was missing something.
Indeed, it is broken. I've applied your fix. Thanks.
Rob
Powered by blists - more mailing lists