[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20221017205610.1.I29f6a2189e84e35ad89c1833793dca9e36c64297@changeid>
Date: Mon, 17 Oct 2022 20:57:20 -0700
From: Brian Norris <briannorris@...omium.org>
To: Ulf Hansson <ulf.hansson@...aro.org>
Cc: Shawn Lin <shawn.lin@...k-chips.com>,
Adrian Hunter <adrian.hunter@...el.com>,
Shawn Guo <shawnguo@...nel.org>,
Fabio Estevam <festevam@...il.com>,
Faiz Abbas <faiz_abbas@...com>,
NXP Linux Team <linux-imx@....com>,
Haibo Chen <haibo.chen@....com>,
Al Cooper <alcooperx@...il.com>, linux-mmc@...r.kernel.org,
Pengutronix Kernel Team <kernel@...gutronix.de>,
linux-kernel@...r.kernel.org,
Florian Fainelli <f.fainelli@...il.com>,
Sascha Hauer <s.hauer@...gutronix.de>,
Thierry Reding <thierry.reding@...il.com>,
Michal Simek <michal.simek@...inx.com>,
Jonathan Hunter <jonathanh@...dia.com>,
Sowjanya Komatineni <skomatineni@...dia.com>,
linux-arm-kernel@...ts.infradead.org,
Broadcom internal kernel review list
<bcm-kernel-feedback-list@...adcom.com>,
Brian Norris <briannorris@...omium.org>, stable@...r.kernel.org
Subject: [PATCH 1/5] mmc: sdhci-of-arasan: Fix SDHCI_RESET_ALL for CQHCI
SDHCI_RESET_ALL resets will reset the hardware CQE state, but we aren't
tracking that properly in software. When out of sync, we may trigger
various timeouts.
It's not typical to perform resets while CQE is enabled, but one
particular case I hit commonly enough: mmc_suspend() -> mmc_power_off().
Typically we will eventually deactivate CQE (cqhci_suspend() ->
cqhci_deactivate()), but that's not guaranteed -- in particular, if
we perform a partial (e.g., interrupted) system suspend.
The same bug was already found and fixed for two other drivers, in v5.7
and v5.9:
5cf583f1fb9c mmc: sdhci-msm: Deactivate CQE during SDHC reset
df57d73276b8 mmc: sdhci-pci: Fix SDHCI_RESET_ALL for CQHCI for Intel GLK-based controllers
The latter is especially prescient, saying "other drivers using CQHCI
might benefit from a similar change, if they also have CQHCI reset by
SDHCI_RESET_ALL."
So like these other patches, deactivate CQHCI when resetting the
controller. Also, move around the DT/caps handling, because
sdhci_setup_host() performs resets before we've initialized CQHCI. This
is the pattern followed in other SDHCI/CQHCI drivers.
Fixes: 84362d79f436 ("mmc: sdhci-of-arasan: Add CQHCI support for arasan,sdhci-5.1")
Cc: <stable@...r.kernel.org>
Signed-off-by: Brian Norris <briannorris@...omium.org>
---
drivers/mmc/host/sdhci-of-arasan.c | 17 +++++++++++------
1 file changed, 11 insertions(+), 6 deletions(-)
diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c
index 3997cad1f793..1988a703781a 100644
--- a/drivers/mmc/host/sdhci-of-arasan.c
+++ b/drivers/mmc/host/sdhci-of-arasan.c
@@ -366,6 +366,10 @@ static void sdhci_arasan_reset(struct sdhci_host *host, u8 mask)
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct sdhci_arasan_data *sdhci_arasan = sdhci_pltfm_priv(pltfm_host);
+ if ((host->mmc->caps2 & MMC_CAP2_CQE) && (mask & SDHCI_RESET_ALL) &&
+ sdhci_arasan->has_cqe)
+ cqhci_deactivate(host->mmc);
+
sdhci_reset(host, mask);
if (sdhci_arasan->quirks & SDHCI_ARASAN_QUIRK_FORCE_CDTEST) {
@@ -1521,7 +1525,8 @@ static int sdhci_arasan_register_sdclk(struct sdhci_arasan_data *sdhci_arasan,
return 0;
}
-static int sdhci_arasan_add_host(struct sdhci_arasan_data *sdhci_arasan)
+static int sdhci_arasan_add_host(struct sdhci_arasan_data *sdhci_arasan,
+ struct device_node *np)
{
struct sdhci_host *host = sdhci_arasan->host;
struct cqhci_host *cq_host;
@@ -1549,6 +1554,10 @@ static int sdhci_arasan_add_host(struct sdhci_arasan_data *sdhci_arasan)
if (dma64)
cq_host->caps |= CQHCI_TASK_DESC_SZ_128;
+ host->mmc->caps2 |= MMC_CAP2_CQE;
+ if (!of_property_read_bool(np, "disable-cqe-dcmd"))
+ host->mmc->caps2 |= MMC_CAP2_CQE_DCMD;
+
ret = cqhci_init(cq_host, host->mmc, dma64);
if (ret)
goto cleanup;
@@ -1705,13 +1714,9 @@ static int sdhci_arasan_probe(struct platform_device *pdev)
host->mmc_host_ops.start_signal_voltage_switch =
sdhci_arasan_voltage_switch;
sdhci_arasan->has_cqe = true;
- host->mmc->caps2 |= MMC_CAP2_CQE;
-
- if (!of_property_read_bool(np, "disable-cqe-dcmd"))
- host->mmc->caps2 |= MMC_CAP2_CQE_DCMD;
}
- ret = sdhci_arasan_add_host(sdhci_arasan);
+ ret = sdhci_arasan_add_host(sdhci_arasan, np);
if (ret)
goto err_add_host;
--
2.38.0.413.g74048e4d9e-goog
Powered by blists - more mailing lists