[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20221017205610.2.I6a715feab6d01f760455865e968ecf0d85036018@changeid>
Date: Mon, 17 Oct 2022 20:57:21 -0700
From: Brian Norris <briannorris@...omium.org>
To: Ulf Hansson <ulf.hansson@...aro.org>
Cc: Shawn Lin <shawn.lin@...k-chips.com>,
Adrian Hunter <adrian.hunter@...el.com>,
Shawn Guo <shawnguo@...nel.org>,
Fabio Estevam <festevam@...il.com>,
Faiz Abbas <faiz_abbas@...com>,
NXP Linux Team <linux-imx@....com>,
Haibo Chen <haibo.chen@....com>,
Al Cooper <alcooperx@...il.com>, linux-mmc@...r.kernel.org,
Pengutronix Kernel Team <kernel@...gutronix.de>,
linux-kernel@...r.kernel.org,
Florian Fainelli <f.fainelli@...il.com>,
Sascha Hauer <s.hauer@...gutronix.de>,
Thierry Reding <thierry.reding@...il.com>,
Michal Simek <michal.simek@...inx.com>,
Jonathan Hunter <jonathanh@...dia.com>,
Sowjanya Komatineni <skomatineni@...dia.com>,
linux-arm-kernel@...ts.infradead.org,
Broadcom internal kernel review list
<bcm-kernel-feedback-list@...adcom.com>,
Brian Norris <briannorris@...omium.org>
Subject: [PATCH 2/5] mmc: sdhci-brcmstb: Fix SDHCI_RESET_ALL for CQHCI
[[ NOTE: this is completely untested by the author, but included solely
because, as noted in commit df57d73276b8 ("mmc: sdhci-pci: Fix
SDHCI_RESET_ALL for CQHCI for Intel GLK-based controllers"), "other
drivers using CQHCI might benefit from a similar change, if they
also have CQHCI reset by SDHCI_RESET_ALL." We've now seen the same
bug on at least MSM, Arasan, and Intel hardware. ]]
SDHCI_RESET_ALL resets will reset the hardware CQE state, but we aren't
tracking that properly in software. When out of sync, we may trigger
various timeouts.
It's not typical to perform resets while CQE is enabled, but this may
occur in some suspend or error recovery scenarios.
Move around the CQE caps handling, because sdhci_setup_host() performs
resets before we've initialized CQHCI. This is the pattern followed in
other SDHCI/CQHCI drivers.
Fixes: d46ba2d17f90 ("mmc: sdhci-brcmstb: Add support for Command Queuing (CQE)")
Signed-off-by: Brian Norris <briannorris@...omium.org>
---
drivers/mmc/host/sdhci-brcmstb.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/host/sdhci-brcmstb.c b/drivers/mmc/host/sdhci-brcmstb.c
index aff36a933ebe..7f4bb362b923 100644
--- a/drivers/mmc/host/sdhci-brcmstb.c
+++ b/drivers/mmc/host/sdhci-brcmstb.c
@@ -55,6 +55,10 @@ static void brcmstb_reset(struct sdhci_host *host, u8 mask)
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct sdhci_brcmstb_priv *priv = sdhci_pltfm_priv(pltfm_host);
+ if ((host->mmc->caps2 & MMC_CAP2_CQE) && (mask & SDHCI_RESET_ALL) &&
+ (priv->flags & BRCMSTB_PRIV_FLAGS_HAS_CQE))
+ cqhci_deactivate(host->mmc);
+
sdhci_reset(host, mask);
/* Reset will clear this, so re-enable it */
@@ -209,7 +213,6 @@ static int sdhci_brcmstb_add_host(struct sdhci_host *host,
return sdhci_add_host(host);
dev_dbg(mmc_dev(host->mmc), "CQE is enabled\n");
- host->mmc->caps2 |= MMC_CAP2_CQE | MMC_CAP2_CQE_DCMD;
ret = sdhci_setup_host(host);
if (ret)
return ret;
@@ -230,6 +233,8 @@ static int sdhci_brcmstb_add_host(struct sdhci_host *host,
cq_host->caps |= CQHCI_TASK_DESC_SZ_128;
}
+ host->mmc->caps2 |= MMC_CAP2_CQE | MMC_CAP2_CQE_DCMD;
+
ret = cqhci_init(cq_host, host->mmc, dma64);
if (ret)
goto cleanup;
--
2.38.0.413.g74048e4d9e-goog
Powered by blists - more mailing lists