[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <2aafa6cc-a7de-0b7a-571f-04593ad53787@linaro.org>
Date: Fri, 21 Oct 2022 21:59:56 +0200
From: Daniel Lezcano <daniel.lezcano@...aro.org>
To: Sebastian Reichel <sebastian.reichel@...labora.com>,
Heiko Stuebner <heiko@...ech.de>,
"Rafael J. Wysocki" <rafael@...nel.org>,
Amit Kucheria <amitk@...nel.org>,
Zhang Rui <rui.zhang@...el.com>
Cc: Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
linux-pm@...r.kernel.org, linux-rockchip@...ts.infradead.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
Finley Xiao <finley.xiao@...k-chips.com>, kernel@...labora.com
Subject: Re: [PATCH 1/2] thermal: rockchip: Support RK3588 SoC in the thermal
driver
On 21/10/2022 19:47, Sebastian Reichel wrote:
> From: Finley Xiao <finley.xiao@...k-chips.com>
>
> The RK3588 SoC has seven channels TS-ADC(TOP, BIG_CORE0, BIG_CORE1,
> LITTEL_CORE, CENTER, GPU, and NPU).
Is possible to give a more elaborate description of those sensors?
What is TOP and CENTER ?
There are 4 Bigs on this platform but two sensors ?
> Signed-off-by: Finley Xiao <finley.xiao@...k-chips.com>
> [rebase, squash fixes]
> Signed-off-by: Sebastian Reichel <sebastian.reichel@...labora.com>
> ---
> drivers/thermal/rockchip_thermal.c | 182 ++++++++++++++++++++++++++++-
> 1 file changed, 179 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c
> index 819e059cde71..82f475a6448f 100644
> --- a/drivers/thermal/rockchip_thermal.c
> +++ b/drivers/thermal/rockchip_thermal.c
> @@ -61,10 +61,9 @@ enum adc_sort_mode {
> #include "thermal_hwmon.h"
>
> /**
> - * The max sensors is two in rockchip SoCs.
> - * Two sensors: CPU and GPU sensor.
> + * The max sensors is seven in rockchip SoCs.
> */
> -#define SOC_MAX_SENSORS 2
> +#define SOC_MAX_SENSORS 7
You may get rid of this and replace the sensors array to an dyn
allocation based on chn_num
[ ... ]
> +static const struct rockchip_tsadc_chip rk3588_tsadc_data = {
> + /* top, big_core0, big_core1, little_core, center, gpu, npu */
> + .chn_id = {0, 1, 2, 3, 4, 5, 6},
You may want to revisit that. Actually, chn_id is not useful and can be
removed everywhere as there is no hole. Otherwise a bit mask could be
used. By removing it, SENSOR_CPU and SENSOR_GPU can be removed too.
> + .chn_num = 7, /* seven channels for tsadc
> + .tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
> + .tshut_polarity = TSHUT_LOW_ACTIVE, /* default TSHUT LOW ACTIVE */
> + .tshut_temp = 95000,
> + .initialize = rk_tsadcv8_initialize,
> + .irq_ack = rk_tsadcv4_irq_ack,
> + .control = rk_tsadcv4_control,
> + .get_temp = rk_tsadcv4_get_temp,
> + .set_alarm_temp = rk_tsadcv3_alarm_temp,
> + .set_tshut_temp = rk_tsadcv3_tshut_temp,
> + .set_tshut_mode = rk_tsadcv3_tshut_mode,
> + .table = {
> + .id = rk3588_code_table,
> + .length = ARRAY_SIZE(rk3588_code_table),
> + .data_mask = TSADCV4_DATA_MASK,
> + .mode = ADC_INCREMENT,
> + },
> +};
> +
> static const struct of_device_id of_rockchip_thermal_match[] = {
> { .compatible = "rockchip,px30-tsadc",
> .data = (void *)&px30_tsadc_data,
> @@ -1180,6 +1352,10 @@ static const struct of_device_id of_rockchip_thermal_match[] = {
> .compatible = "rockchip,rk3568-tsadc",
> .data = (void *)&rk3568_tsadc_data,
> },
> + {
> + .compatible = "rockchip,rk3588-tsadc",
> + .data = (void *)&rk3588_tsadc_data,
> + },
> { /* end */ },
> };
> MODULE_DEVICE_TABLE(of, of_rockchip_thermal_match);
--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
Powered by blists - more mailing lists