| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <33f04b06-dc00-b7ce-6a24-2282608b40dc@linaro.org>
Date: Wed, 26 Oct 2022 10:03:51 -0400
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Vadym Kochan <vadym.kochan@...ision.eu>,
Miquel Raynal <miquel.raynal@...tlin.com>,
Richard Weinberger <richard@....at>,
Vignesh Raghavendra <vigneshr@...com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Andrew Lunn <andrew@...n.ch>,
Gregory Clement <gregory.clement@...tlin.com>,
Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>,
linux-mtd@...ts.infradead.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org
Cc: Elad Nachman <enachman@...vell.com>,
Chris Packham <chris.packham@...iedtelesis.co.nz>
Subject: Re: [PATCH v5 1/2] dt-bindings: mtd: marvell-nand: Convert to YAML DT
scheme
On 26/10/2022 09:45, Vadym Kochan wrote:
> Switch the DT binding to a YAML schema to enable the DT validation.
>
> Dropped deprecated compatibles and properties described in txt file.
>
> Signed-off-by: Vadym Kochan <vadym.kochan@...ision.eu>
> ---
>
> v5:
> 1) Get back "label" and "partitions" properties but without
> ref to the "partition.yaml" which was wrongly used.
>
> 2) Add "additionalProperties: false" for nand@ because all possible
> properties are described.
>
> v4:
> 1) Remove "label" and "partitions" properties
>
> 2) Use 2 clocks for A7K/8K platform which is a requirement
>
> v3:
> 1) Remove txt version from the MAINTAINERS list
>
> 2) Use enum for some of compatible strings
>
> 3) Drop:
> #address-cells
> #size-cells:
>
> as they are inherited from the nand-controller.yaml
>
> 4) Add restriction to use 2 clocks for A8K SoC
>
> 5) Dropped description for clock-names and extend it with
> minItems: 1
>
> 6) Drop description for "dmas"
>
> 7) Use "unevalautedProperties: false"
>
> 8) Drop quites from yaml refs.
>
> 9) Use 4-space indentation for the example section
>
> v2:
> 1) Fixed warning by yamllint with incorrect indentation for compatible list
>
> .../bindings/mtd/marvell,nand-controller.yaml | 195 ++++++++++++++++++
> .../devicetree/bindings/mtd/marvell-nand.txt | 126 -----------
> MAINTAINERS | 1 -
> 3 files changed, 195 insertions(+), 127 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/mtd/marvell,nand-controller.yaml
> delete mode 100644 Documentation/devicetree/bindings/mtd/marvell-nand.txt
>
> diff --git a/Documentation/devicetree/bindings/mtd/marvell,nand-controller.yaml b/Documentation/devicetree/bindings/mtd/marvell,nand-controller.yaml
> new file mode 100644
> index 000000000000..544e98ed12bb
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mtd/marvell,nand-controller.yaml
> @@ -0,0 +1,195 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mtd/marvell,nand-controller.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Marvell NAND Flash Controller (NFC)
> +
> +maintainers:
> + - Miquel Raynal <miquel.raynal@...tlin.com>
> +
> +properties:
> + compatible:
> + oneOf:
> + - items:
> + - const: marvell,armada-8k-nand-controller
> + - const: marvell,armada370-nand-controller
> + - enum:
> + - marvell,armada370-nand-controller
> + - marvell,pxa3xx-nand-controller
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + clocks:
What happened to maxItems here? This is wrong. You keep changing random
things, again. V3 was correct.
> + description:
> + Shall reference the NAND controller clocks, the second one is
> + is only needed for the Armada 7K/8K SoCs
> +
> + clock-names:
> + items:
> + - const: core
> + - const: reg
> +
> + dmas:
> + maxItems: 1
> +
> + dma-names:
> + items:
> + - const: rxtx
> +
> + marvell,system-controller:
> + $ref: /schemas/types.yaml#/definitions/phandle
> + description: Syscon node that handles NAND controller related registers
> +
> +patternProperties:
> + "^nand@[0-3]$":
> + type: object
> + properties:
> + reg:
> + minimum: 0
> + maximum: 3
> +
> + nand-rb:
> + minimum: 0
> + maximum: 1
> +
> + nand-ecc-strength:
> + enum: [1, 4, 8]
> +
> + nand-on-flash-bbt: true
> +
> + nand-ecc-mode: true
> +
> + nand-ecc-algo:
> + description: |
> + This property is essentially useful when not using hardware ECC.
> + Howerver, it may be added when using hardware ECC for clarification
> + but will be ignored by the driver because ECC mode is chosen depending
> + on the page size and the strength required by the NAND chip.
> + This value may be overwritten with nand-ecc-strength property.
> +
> + nand-ecc-step-size:
> + description: |
> + Marvell's NAND flash controller does use fixed strength
> + (1-bit for Hamming, 16-bit for BCH), so the actual step size
> + will shrink or grow in order to fit the required strength.
> + Step sizes are not completely random for all and follow certain
> + patterns described in AN-379, "Marvell SoC NFC ECC".
> +
> + label:
> + $ref: /schemas/types.yaml#/definitions/string
> +
> + partitions:
> + type: object
That's not what I asked for. Like four times I asked you to add here
unevaluatedProperties: false and I never said that ref to partition.yaml
should be removed and you... instead remove that ref.
You need to define here children and specify their ref.
You must use unevaluatedProperties: false here. So this is fifth time I
am writing this feedback.
> +
> + marvell,nand-keep-config:
> + description: |
> + Orders the driver not to take the timings from the core and
> + leaving them completely untouched. Bootloader timings will then
> + be used.
> + $ref: /schemas/types.yaml#/definitions/flag
> +
> + marvell,nand-enable-arbiter:
> + description: |
> + To enable the arbiter, all boards blindly used it,
> + this bit was set by the bootloader for many boards and even if
> + it is marked reserved in several datasheets, it might be needed to set
> + it (otherwise it is harmless) so whether or not this property is set,
> + the bit is selected by the driver.
> + $ref: /schemas/types.yaml#/definitions/flag
> + deprecated: true
> +
> + additionalProperties: false
> +
> + required:
> + - reg
> + - nand-rb
> +
> +unevaluatedProperties: false
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - clocks
> +
> +allOf:
> + - $ref: nand-controller.yaml#
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: marvell,pxa3xx-nand-controller
> + then:
> + required:
> + - dmas
> + - dma-names
> + else:
> + properties:
> + dmas: false
> + dma-names: false
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: marvell,armada-8k-nand-controller
> + then:
> + required:
> + - marvell,system-controller
> + properties:
> + clocks:
> + minItems: 2
> + maxItems: 2
This does not make sense now...
Best regards,
Krzysztof
Powered by blists - more mailing lists