lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAGXv+5H3B33cTJ7mxd11D3WALHo90fCdTXKXZRfnaK4GATnPMA@mail.gmail.com>
Date:   Thu, 27 Oct 2022 13:42:01 -0700
From:   Chen-Yu Tsai <wenst@...omium.org>
To:     Nícolas F. R. A. Prado 
        <nfraprado@...labora.com>
Cc:     Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Brown <broonie@...nel.org>, devicetree@...r.kernel.org,
        alsa-devel@...a-project.org, Liam Girdwood <lgirdwood@...il.com>,
        linux-kernel@...r.kernel.org, Derek Fang <derek.fang@...ltek.com>,
        kernel@...labora.com,
        AngeloGioacchino Del Regno 
        <angelogioacchino.delregno@...labora.com>
Subject: Re: [PATCH v2 2/4] ASoC: dt-bindings: realtek, rt5682s: Add AVDD and
 MICVDD supplies

On Thu, Oct 27, 2022 at 12:20 PM Nícolas F. R. A. Prado
<nfraprado@...labora.com> wrote:
>
> On Thu, Oct 27, 2022 at 11:11:08AM -0700, Chen-Yu Tsai wrote:
> > On Thu, Oct 27, 2022 at 10:48 AM Chen-Yu Tsai <wenst@...omium.org> wrote:
> > >
> > > On Thu, Oct 27, 2022 at 7:36 AM Nícolas F. R. A. Prado
> > > <nfraprado@...labora.com> wrote:
> > > >
> > > > On Tue, Oct 25, 2022 at 01:12:49PM -0700, Chen-Yu Tsai wrote:
> > > > > On Mon, Oct 24, 2022 at 3:01 PM Nícolas F. R. A. Prado
> > > > > <nfraprado@...labora.com> wrote:
> > > > > >
> > > > > > The rt5682s codec can have two supplies: AVDD and MICVDD. They are
> > > > >
> > > > > The actual chip also has LDO1_IN (for digital core and charge pump)
> > > > > and DBVDD (for I/O). However in the Chromebook designs these two
> > > > > and AVDD are all provided from the same power rail, through separate
> > > > > filter banks.
> > > >
> > > > What about rt5682 (no s), does that chip also have these same supplies?
> >
> > (Missed this question)
> >
> > The RT5682 has the same supplies, plus the VBAT one.
> >
> > ChenYu
> >
> > > > Also, since you already gave the purpose of these other supplies, could you also
> > > > tell the purpose of AVDD, MICVDD and (for rt5682) VBAT? That way I could add
> > > > some description for them in the binding.
> > >
> > > As Mark mentioned in his reply, these are quite standard names.
> > >
> > > AVDD is for the analog bits. MICVDD is for the microphone bias.
> > > VBAT is called battery power in the datasheet. The block diagram
> > > shows it going through an internal controllable LDO whose output
> > > then powers MICVDD. This could be used in designs that don't
> > > include a suitable external supply for MICVDD. If MICVDD is provided,
> > > then one would turn the internal LDO off.
> > >
> > > So either VBAT or MICVDD has to be provided.
>
> So if I get this right we should be making the following supplies required:
> AVDD
> VBAT or MICVDD (on rt5682s there's no VBAT so just MICVDD)

That's right.

> And for LDO1_ON and DBVDD what would be the best way to model? Should we make
> them required in the binding as well and add them pointing to the same regulator
> from AVDD in the chromebook DT or just leave them as optional?

They should be required. And we then describe them to match the board.

ChenYu

> Thanks,
> Nícolas
>
> > >
> > > ChenYu
> > >
> > > > Thanks,
> > > > Nícolas
> > > >
> > > > >
> > > > > Neither does the datasheet specify the ordering of AVDD, DBVDD, and
> > > > > LDO1_IN for power sequencing, just that three should be toggled together.
> > > > >
> > > > > Should we model these? Or wait until some design actually splits these?
> > > > [..]

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ