linux-kernel - Re: [PATCH 05/11] arm64: dts: qcom: sc8280xp-pmics: Add PMK8280 ADC7 block

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <f86157a8-cdcf-00e9-e065-a6d64899300a@linaro.org>
Date:   Thu, 27 Oct 2022 09:54:35 -0400
From:   Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To:     Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>,
        andersson@...nel.org
Cc:     konrad.dybcio@...ainline.org, robh+dt@...nel.org,
        krzysztof.kozlowski+dt@...aro.org, johan+linaro@...nel.org,
        quic_jprakash@...cinc.com, linux-arm-msm@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 05/11] arm64: dts: qcom: sc8280xp-pmics: Add PMK8280 ADC7
 block

On 27/10/2022 02:30, Manivannan Sadhasivam wrote:
> Add support for ADC7 block available in PMK8280 for reading the
> temperature via the AMUX pins.
> 
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
> ---
>  arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi | 11 +++++++++++
>  1 file changed, 11 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi
> index 4a3464f5e6e9..32086d5edd0d 100644
> --- a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi
> @@ -75,6 +75,17 @@ pmk8280_pon_resin: resin {
>  				status = "disabled";
>  			};
>  		};
> +
> +		pmk8280_vadc: adc@...0 {
> +			compatible = "qcom,spmi-adc7";
> +			reg = <0x3100>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
> +			interrupt-names = "eoc-int-en-set";

Schema does not accept this. Be sure `make dtbs_check` passes.

Best regards,
Krzysztof