lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <20221029123153.GW125525@dragon>
Date:   Sat, 29 Oct 2022 20:31:53 +0800
From:   Shawn Guo <shawnguo@...nel.org>
To:     Ioana Ciornei <ioana.ciornei@....com>
Cc:     leoyang.li@....com, robh+dt@...nel.org,
        krzysztof.kozlowski+dt@...aro.org, rmk+kernel@...linux.org.uk,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 0/3] arch: dts: specify the MDC frequency on Layerscape
 DPAA2 devices

On Tue, Oct 25, 2022 at 05:41:14PM +0300, Ioana Ciornei wrote:
> Up until now, the external MDIO controller frequency values relied
> either on the default ones out of reset or on those setup by u-boot.
> Let's just properly specify the MDC frequency in the DTS so that even
> without u-boot's intervention Linux can drive the MDIO bus.
> 
> This patch set adds the needed properties on all DPAA2 based SoCs.
> 
> Ioana Ciornei (3):
>   arm64: dts: lx2160a: specify clock frequencies for the MDIO
>     controllers
>   arm64: dts: ls1088a: specify clock frequencies for the MDIO
>     controllers
>   arm64: dts: ls208xa: specify clock frequencies for the MDIO
>     controllers

Applied all, thanks!

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ