| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20221030113715.12067-1-paul@crapouillou.net>
Date: Sun, 30 Oct 2022 11:37:15 +0000
From: Paul Cercueil <paul@...pouillou.net>
To: Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>
Cc: linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
Paul Cercueil <paul@...pouillou.net>
Subject: [PATCH 1/1] dt-bindings: Convert active-semi PMIC docs to YAML schemas
Create YAML bindings for the Active-semi PMICs and remove the old text
files.
The bindings aren't perfect, for instance I couldn't find good
descriptions for the vendor properties in the "charger" node of the
ACT8945A because I am not familiar with the hardware and these
properties were not documented anywhere.
The YAML schemas are a bit different than what is described in the old
text files, because these were sometimes wrong or had missing
information. This is the case for the ACT8600 documentation, which
specified the valid node names for the regulators, while the driver was
expecting different names. This led to the current situation where we
have two different boards using different names for the regulators:
- arch/mips/boot/dts/ingenic/ci20.dts uses the names documented in the
text file,
- arch/mips/boot/dts/ingenic/gcw0.dts uses the names that the driver
expects.
In theory, the driver should be fixed to follow the documentation, and
accept both naming schemes. In practice though, when the PMIC node was
added to the ci20.dts board file, the names were already wrong in
regards to what the driver expected, so it never really worked
correctly and wasn't tested properly. Furthermore, in that board the
consumers of the regulators aren't working for various other reasons
(invalid GPIOs, etc.).
For that reason, for the ACT8600 bindings I decided to only use the node
names that the driver expects (and that gcw0.dts uses), instead of
accepting both old and new names. A follow-up patch will update the CI20
board to use the new regulator names.
Signed-off-by: Paul Cercueil <paul@...pouillou.net>
---
Note:
I set Liam Girdwood and Mark Brown as the maintainers by default, since
it doesn't appear that anybody is managing the Active-semi drivers, but
if anybody steps up I can update it.
Cheers,
-Paul
.../bindings/regulator/act8865-regulator.txt | 117 --------
.../bindings/regulator/act8945a-regulator.txt | 113 --------
.../regulator/active-semi,act8600.yaml | 143 ++++++++++
.../regulator/active-semi,act8846.yaml | 209 ++++++++++++++
.../regulator/active-semi,act8865.yaml | 162 +++++++++++
.../regulator/active-semi,act8945a.yaml | 263 ++++++++++++++++++
6 files changed, 777 insertions(+), 230 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/regulator/act8865-regulator.txt
delete mode 100644 Documentation/devicetree/bindings/regulator/act8945a-regulator.txt
create mode 100644 Documentation/devicetree/bindings/regulator/active-semi,act8600.yaml
create mode 100644 Documentation/devicetree/bindings/regulator/active-semi,act8846.yaml
create mode 100644 Documentation/devicetree/bindings/regulator/active-semi,act8865.yaml
create mode 100644 Documentation/devicetree/bindings/regulator/active-semi,act8945a.yaml
diff --git a/Documentation/devicetree/bindings/regulator/act8865-regulator.txt b/Documentation/devicetree/bindings/regulator/act8865-regulator.txt
deleted file mode 100644
index b9f58e480349..000000000000
--- a/Documentation/devicetree/bindings/regulator/act8865-regulator.txt
+++ /dev/null
@@ -1,117 +0,0 @@
-ACT88xx regulators
--------------------
-
-Required properties:
-- compatible: "active-semi,act8846" or "active-semi,act8865" or "active-semi,act8600"
-- reg: I2C slave address
-
-Optional properties:
-- system-power-controller: Telling whether or not this pmic is controlling
- the system power. See Documentation/devicetree/bindings/power/power-controller.txt .
-- active-semi,vsel-high: Indicates the VSEL pin is high.
- If this property is missing, assume the VSEL pin is low(0).
-
-Optional input supply properties:
-- for act8600:
- - vp1-supply: The input supply for DCDC_REG1
- - vp2-supply: The input supply for DCDC_REG2
- - vp3-supply: The input supply for DCDC_REG3
- - inl-supply: The input supply for LDO_REG5, LDO_REG6, LDO_REG7 and LDO_REG8
- SUDCDC_REG4, LDO_REG9 and LDO_REG10 do not have separate supplies.
-- for act8846:
- - vp1-supply: The input supply for REG1
- - vp2-supply: The input supply for REG2
- - vp3-supply: The input supply for REG3
- - vp4-supply: The input supply for REG4
- - inl1-supply: The input supply for REG5, REG6 and REG7
- - inl2-supply: The input supply for REG8 and LDO_REG9
- - inl3-supply: The input supply for REG10, REG11 and REG12
-- for act8865:
- - vp1-supply: The input supply for DCDC_REG1
- - vp2-supply: The input supply for DCDC_REG2
- - vp3-supply: The input supply for DCDC_REG3
- - inl45-supply: The input supply for LDO_REG1 and LDO_REG2
- - inl67-supply: The input supply for LDO_REG3 and LDO_REG4
-
-Any standard regulator properties can be used to configure the single regulator.
-regulator-initial-mode, regulator-allowed-modes and regulator-mode could be specified
-for act8865 using mode values from dt-bindings/regulator/active-semi,8865-regulator.h
-file.
-
-The valid names for regulators are:
- - for act8846:
- REG1, REG2, REG3, REG4, REG5, REG6, REG7, REG8, REG9, REG10, REG11, REG12
- - for act8865:
- DCDC_REG1, DCDC_REG2, DCDC_REG3, LDO_REG1, LDO_REG2, LDO_REG3, LDO_REG4.
- - for act8600:
- DCDC_REG1, DCDC_REG2, DCDC_REG3, SUDCDC_REG4, LDO_REG5, LDO_REG6, LDO_REG7,
- LDO_REG8, LDO_REG9, LDO_REG10,
-
-Example:
---------
-
-#include <dt-bindings/regulator/active-semi,8865-regulator.h>
-
- i2c1: i2c@...18000 {
- pmic: act8865@5b {
- compatible = "active-semi,act8865";
- reg = <0x5b>;
- active-semi,vsel-high;
-
- regulators {
- vcc_1v8_reg: DCDC_REG1 {
- regulator-name = "VCC_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- vcc_1v2_reg: DCDC_REG2 {
- regulator-name = "VCC_1V2";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1300000>;
- regulator-always-on;
-
- regulator-allowed-modes = <ACT8865_REGULATOR_MODE_FIXED>,
- <ACT8865_REGULATOR_MODE_LOWPOWER>;
- regulator-initial-mode = <ACT8865_REGULATOR_MODE_FIXED>;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-min-microvolt = <1150000>;
- regulator-suspend-max-microvolt = <1150000>;
- regulator-changeable-in-suspend;
- regulator-mode = <ACT8865_REGULATOR_MODE_LOWPOWER>;
- };
- };
-
- vcc_3v3_reg: DCDC_REG3 {
- regulator-name = "VCC_3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- vddana_reg: LDO_REG1 {
- regulator-name = "VDDANA";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
-
- regulator-allowed-modes = <ACT8865_REGULATOR_MODE_NORMAL>,
- <ACT8865_REGULATOR_MODE_LOWPOWER>;
- regulator-initial-mode = <ACT8865_REGULATOR_MODE_NORMAL>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vddfuse_reg: LDO_REG2 {
- regulator-name = "FUSE_2V5";
- regulator-min-microvolt = <2500000>;
- regulator-max-microvolt = <2500000>;
- };
- };
- };
- };
diff --git a/Documentation/devicetree/bindings/regulator/act8945a-regulator.txt b/Documentation/devicetree/bindings/regulator/act8945a-regulator.txt
deleted file mode 100644
index 4017527619ab..000000000000
--- a/Documentation/devicetree/bindings/regulator/act8945a-regulator.txt
+++ /dev/null
@@ -1,113 +0,0 @@
-Device-Tree bindings for regulators of Active-semi ACT8945A Multi-Function Device
-
-Required properties:
- - compatible: "active-semi,act8945a", please refer to ../mfd/act8945a.txt.
-
-Optional properties:
-- active-semi,vsel-high: Indicates if the VSEL pin is set to logic-high.
- If this property is missing, assume the VSEL pin is set to logic-low.
-
-Optional input supply properties:
- - vp1-supply: The input supply for REG_DCDC1
- - vp2-supply: The input supply for REG_DCDC2
- - vp3-supply: The input supply for REG_DCDC3
- - inl45-supply: The input supply for REG_LDO1 and REG_LDO2
- - inl67-supply: The input supply for REG_LDO3 and REG_LDO4
-
-Any standard regulator properties can be used to configure the single regulator.
-regulator-initial-mode, regulator-allowed-modes and regulator-mode could be
-specified using mode values from dt-bindings/regulator/active-semi,8945a-regulator.h
-file.
-
-The valid names for regulators are:
- REG_DCDC1, REG_DCDC2, REG_DCDC3, REG_LDO1, REG_LDO2, REG_LDO3, REG_LDO4.
-
-Example:
-
-#include <dt-bindings/regulator/active-semi,8945a-regulator.h>
-
- pmic@5b {
- compatible = "active-semi,act8945a";
- reg = <0x5b>;
-
- active-semi,vsel-high;
-
- regulators {
- vdd_1v35_reg: REG_DCDC1 {
- regulator-name = "VDD_1V35";
- regulator-min-microvolt = <1350000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
-
- regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>,
- <ACT8945A_REGULATOR_MODE_LOWPOWER>;
- regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-min-microvolt=<1400000>;
- regulator-suspend-max-microvolt=<1400000>;
- regulator-changeable-in-suspend;
- regulator-mode=<ACT8945A_REGULATOR_MODE_LOWPOWER>;
- };
- };
-
- vdd_1v2_reg: REG_DCDC2 {
- regulator-name = "VDD_1V2";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1300000>;
- regulator-always-on;
-
- regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>,
- <ACT8945A_REGULATOR_MODE_LOWPOWER>;
- regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_3v3_reg: REG_DCDC3 {
- regulator-name = "VDD_3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- vdd_fuse_reg: REG_LDO1 {
- regulator-name = "VDD_FUSE";
- regulator-min-microvolt = <2500000>;
- regulator-max-microvolt = <2500000>;
- regulator-always-on;
-
- regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>,
- <ACT8945A_REGULATOR_MODE_LOWPOWER>;
- regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_3v3_lp_reg: REG_LDO2 {
- regulator-name = "VDD_3V3_LP";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- vdd_led_reg: REG_LDO3 {
- regulator-name = "VDD_LED";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- vdd_sdhc_1v8_reg: REG_LDO4 {
- regulator-name = "VDD_SDHC_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
- };
- };
diff --git a/Documentation/devicetree/bindings/regulator/active-semi,act8600.yaml b/Documentation/devicetree/bindings/regulator/active-semi,act8600.yaml
new file mode 100644
index 000000000000..bf8c5145939e
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/active-semi,act8600.yaml
@@ -0,0 +1,143 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/active-semi,act8600.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Active-semi ACT8600 regulator
+
+maintainers:
+ - Liam Girdwood <lgirdwood@...il.com>
+ - Mark Brown <broonie@...nel.org>
+
+properties:
+ compatible:
+ const: active-semi,act8600
+
+ reg:
+ description: I2C address
+ maxItems: 1
+
+ system-power-controller:
+ description: |
+ Indicates that the ACT8600 is responsible for powering OFF
+ the system.
+ type: boolean
+
+ active-semi,vsel-high:
+ description: |
+ Indicates the VSEL pin is high. If this property is missing,
+ the VSEL pin is assumed to be low.
+ type: boolean
+
+ regulators:
+ type: object
+ unevaluatedProperties: false
+
+ properties:
+ DCDC1:
+ type: object
+ $ref: /schemas/regulator/regulator.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ vp1-supply:
+ description: Handle to the VP1 input supply
+
+ DCDC2:
+ type: object
+ $ref: /schemas/regulator/regulator.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ vp2-supply:
+ description: Handle to the VP2 input supply
+
+ DCDC3:
+ type: object
+ $ref: /schemas/regulator/regulator.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ vp3-supply:
+ description: Handle to the VP3 input supply
+
+ patternProperties:
+ "^((SUDCDC_REG4)|(LDO_REG9)|(LDO_REG10))$":
+ type: object
+ $ref: /schemas/regulator/regulator.yaml#
+ unevaluatedProperties: false
+
+ "^LDO[5-8]$":
+ type: object
+ $ref: /schemas/regulator/regulator.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ inl-supply:
+ description: Handle to the INL input supply
+
+ additionalProperties: false
+
+additionalProperties: false
+
+required:
+ - reg
+ - compatible
+ - regulators
+
+examples:
+ - |
+ i2c3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ act8600: pmic@5a {
+ compatible = "active-semi,act8600";
+ reg = <0x5a>;
+
+ regulators {
+ SUDCDC_REG4 {
+ regulator-min-microvolt = <5300000>;
+ regulator-max-microvolt = <5300000>;
+ inl-supply = <&vcc>;
+ };
+
+ LDO5 {
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ inl-supply = <&vcc>;
+ };
+
+ LDO6 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ inl-supply = <&vcc>;
+ };
+
+ LDO7 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ inl-supply = <&vcc>;
+ };
+
+ LDO8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ inl-supply = <&vcc>;
+ };
+
+ LDO_REG9 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ inl-supply = <&vcc>;
+ };
+
+ LDO_REG10 {
+ inl-supply = <&vcc>;
+ };
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/regulator/active-semi,act8846.yaml b/Documentation/devicetree/bindings/regulator/active-semi,act8846.yaml
new file mode 100644
index 000000000000..7c3bd0f804e3
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/active-semi,act8846.yaml
@@ -0,0 +1,209 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/active-semi,act8846.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Active-semi ACT8846 regulator
+
+maintainers:
+ - Liam Girdwood <lgirdwood@...il.com>
+ - Mark Brown <broonie@...nel.org>
+
+properties:
+ compatible:
+ const: active-semi,act8846
+
+ reg:
+ description: I2C address
+ maxItems: 1
+
+ system-power-controller:
+ description: |
+ Indicates that the ACT8846 is responsible for powering OFF
+ the system.
+ type: boolean
+
+ active-semi,vsel-high:
+ description: |
+ Indicates the VSEL pin is high. If this property is missing,
+ the VSEL pin is assumed to be low.
+ type: boolean
+
+ regulators:
+ type: object
+ unevaluatedProperties: false
+
+ properties:
+ REG1:
+ type: object
+ $ref: /schemas/regulator/regulator.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ vp1-supply:
+ description: Handle to the VP1 input supply
+
+ REG2:
+ type: object
+ $ref: /schemas/regulator/regulator.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ vp2-supply:
+ description: Handle to the VP2 input supply
+
+ REG3:
+ type: object
+ $ref: /schemas/regulator/regulator.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ vp3-supply:
+ description: Handle to the VP3 input supply
+
+ REG4:
+ type: object
+ $ref: /schemas/regulator/regulator.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ vp4-supply:
+ description: Handle to the VP4 input supply
+
+ patternProperties:
+ "^REG[5-7]$":
+ type: object
+ $ref: /schemas/regulator/regulator.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ inl1-supply:
+ description: Handle to the INL1 input supply
+
+ "^REG[8-9]$":
+ type: object
+ $ref: /schemas/regulator/regulator.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ inl2-supply:
+ description: Handle to the INL2 input supply
+
+ "^REG1[0-2]$":
+ type: object
+ $ref: /schemas/regulator/regulator.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ inl3-supply:
+ description: Handle to the INL3 input supply
+
+ additionalProperties: false
+
+additionalProperties: false
+
+required:
+ - reg
+ - compatible
+ - regulators
+
+examples:
+ - |
+ i2c3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ act8846: pmic@5a {
+ compatible = "active-semi,act8846";
+ reg = <0x5a>;
+
+ system-power-controller;
+
+ regulators {
+ vcc_ddr: REG1 {
+ regulator-name = "VCC_DDR";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ vcc_io: REG2 {
+ regulator-name = "VCC_IO";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vdd_log: REG3 {
+ regulator-name = "VDD_LOG";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ vcc_20: REG4 {
+ regulator-name = "VCC_20";
+ regulator-min-microvolt = <2000000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-always-on;
+ };
+
+ vccio_sd: REG5 {
+ regulator-name = "VCCIO_SD";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vdd10_lcd: REG6 {
+ regulator-name = "VDD10_LCD";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ vcc_wl: REG7 {
+ regulator-name = "VCC_WL";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vcca_33: REG8 {
+ regulator-name = "VCCA_33";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vcc_lan: REG9 {
+ regulator-name = "VCC_LAN";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vdd_10: REG10 {
+ regulator-name = "VDD_10";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ vcc_18: REG11 {
+ regulator-name = "VCC_18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ vcc18_lcd: REG12 {
+ regulator-name = "VCC18_LCD";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/regulator/active-semi,act8865.yaml b/Documentation/devicetree/bindings/regulator/active-semi,act8865.yaml
new file mode 100644
index 000000000000..cf36ab7c82c4
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/active-semi,act8865.yaml
@@ -0,0 +1,162 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/active-semi,act8865.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Active-semi ACT8865 regulator
+
+maintainers:
+ - Liam Girdwood <lgirdwood@...il.com>
+ - Mark Brown <broonie@...nel.org>
+
+properties:
+ compatible:
+ const: active-semi,act8865
+
+ reg:
+ description: I2C address
+ maxItems: 1
+
+ system-power-controller:
+ description: |
+ Indicates that the ACT8865 is responsible for powering OFF
+ the system.
+ type: boolean
+
+ active-semi,vsel-high:
+ description: |
+ Indicates the VSEL pin is high. If this property is missing,
+ the VSEL pin is assumed to be low.
+ type: boolean
+
+ regulators:
+ type: object
+ unevaluatedProperties: false
+
+ properties:
+ DCDC_REG1:
+ type: object
+ $ref: /schemas/regulator/regulator.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ vp1-supply:
+ description: Handle to the VP1 input supply
+
+ DCDC_REG2:
+ type: object
+ $ref: /schemas/regulator/regulator.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ vp2-supply:
+ description: Handle to the VP2 input supply
+
+ DCDC_REG3:
+ type: object
+ $ref: /schemas/regulator/regulator.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ vp3-supply:
+ description: Handle to the VP3 input supply
+
+ patternProperties:
+ "^LDO_REG[1-2]$":
+ type: object
+ $ref: /schemas/regulator/regulator.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ inl45-supply:
+ description: Handle to the INL45 input supply
+
+ "^LDO_REG[3-4]$":
+ type: object
+ $ref: /schemas/regulator/regulator.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ inl67-supply:
+ description: Handle to the INL67 input supply
+
+ additionalProperties: false
+
+additionalProperties: false
+
+required:
+ - reg
+ - compatible
+ - regulators
+
+examples:
+ - |
+ #include <dt-bindings/regulator/active-semi,8865-regulator.h>
+
+ i2c1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmic: act8865@5b {
+ compatible = "active-semi,act8865";
+ reg = <0x5b>;
+ active-semi,vsel-high;
+
+ regulators {
+ vcc_1v8_reg: DCDC_REG1 {
+ regulator-name = "VCC_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ vcc_1v2_reg: DCDC_REG2 {
+ regulator-name = "VCC_1V2";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+
+ regulator-allowed-modes = <ACT8865_REGULATOR_MODE_FIXED>,
+ <ACT8865_REGULATOR_MODE_LOWPOWER>;
+ regulator-initial-mode = <ACT8865_REGULATOR_MODE_FIXED>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-min-microvolt = <1150000>;
+ regulator-suspend-max-microvolt = <1150000>;
+ regulator-changeable-in-suspend;
+ regulator-mode = <ACT8865_REGULATOR_MODE_LOWPOWER>;
+ };
+ };
+
+ vcc_3v3_reg: DCDC_REG3 {
+ regulator-name = "VCC_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vddana_reg: LDO_REG1 {
+ regulator-name = "VDDANA";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+
+ regulator-allowed-modes = <ACT8865_REGULATOR_MODE_NORMAL>,
+ <ACT8865_REGULATOR_MODE_LOWPOWER>;
+ regulator-initial-mode = <ACT8865_REGULATOR_MODE_NORMAL>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vddfuse_reg: LDO_REG2 {
+ regulator-name = "FUSE_2V5";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ };
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/regulator/active-semi,act8945a.yaml b/Documentation/devicetree/bindings/regulator/active-semi,act8945a.yaml
new file mode 100644
index 000000000000..fcaaa4885aeb
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/active-semi,act8945a.yaml
@@ -0,0 +1,263 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/active-semi,act8945a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Active-semi ACT8945a regulator
+
+maintainers:
+ - Liam Girdwood <lgirdwood@...il.com>
+ - Mark Brown <broonie@...nel.org>
+
+properties:
+ compatible:
+ const: active-semi,act8945a
+
+ reg:
+ description: I2C address
+ maxItems: 1
+
+ system-power-controller:
+ description: |
+ Indicates that the ACT8945a is responsible for powering OFF
+ the system.
+ type: boolean
+
+ active-semi,vsel-high:
+ description: |
+ Indicates the VSEL pin is high. If this property is missing,
+ the VSEL pin is assumed to be low.
+ type: boolean
+
+ regulators:
+ type: object
+ unevaluatedProperties: false
+
+ properties:
+ REG_DCDC1:
+ type: object
+ $ref: /schemas/regulator/regulator.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ vp1-supply:
+ description: Handle to the VP1 input supply
+
+ REG_DCDC2:
+ type: object
+ $ref: /schemas/regulator/regulator.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ vp2-supply:
+ description: Handle to the VP2 input supply
+
+ REG_DCDC3:
+ type: object
+ $ref: /schemas/regulator/regulator.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ vp3-supply:
+ description: Handle to the VP3 input supply
+
+ patternProperties:
+ "^REG_LDO[1-2]$":
+ type: object
+ $ref: /schemas/regulator/regulator.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ inl45-supply:
+ description: Handle to the INL45 input supply
+
+ "^REG_LDO[3-4]$":
+ type: object
+ $ref: /schemas/regulator/regulator.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ inl67-supply:
+ description: Handle to the INL67 input supply
+
+ additionalProperties: false
+
+ charger:
+ type: object
+ additionalProperties: false
+
+ properties:
+ compatible:
+ const: active-semi,act8945a-charger
+
+ interrupts:
+ maxItems: 1
+
+ active-semi,chglev-gpios:
+ description: CGHLEV GPIO
+ maxItems: 1
+
+ active-semi,lbo-gpios:
+ description: LBO GPIO
+ maxItems: 1
+
+ active-semi,input-voltage-threshold-microvolt:
+ description: Input voltage threshold
+ maxItems: 1
+
+ active-semi,precondition-timeout:
+ description: Precondition timeout
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ active-semi,total-timeout:
+ description: Total timeout
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ required:
+ - compatible
+ - interrupts
+
+additionalProperties: false
+
+required:
+ - reg
+ - compatible
+ - regulators
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/mfd/atmel-flexcom.h>
+ #include <dt-bindings/regulator/active-semi,8945a-regulator.h>
+
+ i2c1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmic@5b {
+ compatible = "active-semi,act8945a";
+ reg = <0x5b>;
+ active-semi,vsel-high;
+
+ regulators {
+ vdd_1v35_reg: REG_DCDC1 {
+ regulator-name = "VDD_1V35";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>,
+ <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+ regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>;
+ regulator-always-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-min-microvolt = <1400000>;
+ regulator-suspend-max-microvolt = <1400000>;
+ regulator-changeable-in-suspend;
+ regulator-mode = <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+ };
+ };
+
+ vdd_1v2_reg: REG_DCDC2 {
+ regulator-name = "VDD_1V2";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>,
+ <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+ regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>;
+ regulator-always-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_3v3_reg: REG_DCDC3 {
+ regulator-name = "VDD_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>,
+ <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+ regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>;
+ regulator-always-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_fuse_reg: REG_LDO1 {
+ regulator-name = "VDD_FUSE";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>,
+ <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+ regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>;
+ regulator-always-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_3v3_lp_reg: REG_LDO2 {
+ regulator-name = "VDD_3V3_LP";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>,
+ <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+ regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>;
+ regulator-always-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_led_reg: REG_LDO3 {
+ regulator-name = "VDD_LED";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>,
+ <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+ regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>;
+ regulator-always-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_sdhc_1v8_reg: REG_LDO4 {
+ regulator-name = "VDD_SDHC_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>,
+ <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+ regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>;
+ regulator-always-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+
+ charger {
+ compatible = "active-semi,act8945a-charger";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>;
+ interrupt-parent = <&pioA>;
+ interrupts = <45 IRQ_TYPE_EDGE_RISING>;
+
+ active-semi,chglev-gpios = <&pioA 12 GPIO_ACTIVE_HIGH>;
+ active-semi,lbo-gpios = <&pioA 72 GPIO_ACTIVE_LOW>;
+ active-semi,input-voltage-threshold-microvolt = <6600>;
+ active-semi,precondition-timeout = <40>;
+ active-semi,total-timeout = <3>;
+ status = "okay";
+ };
+ };
+ };
--
2.35.1
Powered by blists - more mailing lists