[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <PAXPR04MB9185E538798F83B3C03C70EA89389@PAXPR04MB9185.eurprd04.prod.outlook.com>
Date: Thu, 3 Nov 2022 22:00:58 +0000
From: Shenwei Wang <shenwei.wang@....com>
To: Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Linus Walleij <linus.walleij@...aro.org>,
Bartosz Golaszewski <brgl@...ev.pl>,
Aisheng Dong <aisheng.dong@....com>,
Jacky Bai <ping.bai@....com>
CC: Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>,
dl-linux-imx <linux-imx@....com>, Peng Fan <peng.fan@....com>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"imx@...ts.linux.dev" <imx@...ts.linux.dev>
Subject: RE: [PATCH v4 0/5] gpio: add suspend/resume support for i.mx8x SoCs
> -----Original Message-----
> Subject: [PATCH v4 0/5] gpio: add suspend/resume support for i.mx8x SoCs
>
> On i.MX8QM/QXP/DXL SoCs, even a GPIO is selected as the wakeup source, the
> GPIO block will be powered off when system enters into suspend state. This can
> greatly reduce the power consumption of suspend state because the whole
> partition can be shutdown. This is called PAD wakeup feature on i.MX8x
> platform.
>
> This series of patches enable this wakeup feature on i.MX8QM/QXP/DXL
> platforms.
>
> Changes in v4:
> - fixed the format issues reported by Peng Fan.
> - change the return type of mxc_gpio_generic_config, and limit the
> suspend/resume behavior changes only on i.MX8QM/QXP/DXL platform.
>
A soft ping. 😊
Regards,
Shenwei
> Changes in v3:
> - According to the feedback from Linus Walleij, the wakeup feature is
> moved to pinctrl driver, and the array of gpio-pin mapping is moved
> to gpio device node and initialized via gpio-ranges property.
>
> Shenwei Wang (5):
> arm64: dts: imx8dxl-ss-lsio: add gpio-ranges property
> arm64: dts: imx8qm-ss-lsio: add gpio-ranges property
> arm64: dts: imx8qxp-ss-lsio: add gpio-ranges property
> pinctrl: freescale: add pad wakeup config
> gpio: mxc: enable pad wakeup on i.MX8x platforms
>
> .../boot/dts/freescale/imx8dxl-ss-lsio.dtsi | 41 +++++++++
> .../boot/dts/freescale/imx8qm-ss-lsio.dtsi | 38 ++++++++
> .../boot/dts/freescale/imx8qxp-ss-lsio.dtsi | 25 +++++
> drivers/gpio/gpio-mxc.c | 92 ++++++++++++++++++-
> drivers/pinctrl/freescale/pinctrl-scu.c | 30 ++++++
> 5 files changed, 225 insertions(+), 1 deletion(-)
>
> --
> 2.34.1
Powered by blists - more mailing lists