[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAMRc=McPXjixgSJNDfFLRzR=OM2Q9SuAuCumqEpjb_s2fdYa-w@mail.gmail.com>
Date: Mon, 7 Nov 2022 11:29:35 +0100
From: Bartosz Golaszewski <brgl@...ev.pl>
To: Shenwei Wang <shenwei.wang@....com>
Cc: Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Linus Walleij <linus.walleij@...aro.org>,
Aisheng Dong <aisheng.dong@....com>,
Jacky Bai <ping.bai@....com>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>,
dl-linux-imx <linux-imx@....com>, Peng Fan <peng.fan@....com>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"imx@...ts.linux.dev" <imx@...ts.linux.dev>
Subject: Re: [PATCH v4 0/5] gpio: add suspend/resume support for i.mx8x SoCs
On Thu, Nov 3, 2022 at 11:01 PM Shenwei Wang <shenwei.wang@....com> wrote:
>
>
>
> > -----Original Message-----
> > Subject: [PATCH v4 0/5] gpio: add suspend/resume support for i.mx8x SoCs
> >
> > On i.MX8QM/QXP/DXL SoCs, even a GPIO is selected as the wakeup source, the
> > GPIO block will be powered off when system enters into suspend state. This can
> > greatly reduce the power consumption of suspend state because the whole
> > partition can be shutdown. This is called PAD wakeup feature on i.MX8x
> > platform.
> >
> > This series of patches enable this wakeup feature on i.MX8QM/QXP/DXL
> > platforms.
> >
> > Changes in v4:
> > - fixed the format issues reported by Peng Fan.
> > - change the return type of mxc_gpio_generic_config, and limit the
> > suspend/resume behavior changes only on i.MX8QM/QXP/DXL platform.
> >
>
> A soft ping. 😊
>
> Regards,
> Shenwei
>
> > Changes in v3:
> > - According to the feedback from Linus Walleij, the wakeup feature is
> > moved to pinctrl driver, and the array of gpio-pin mapping is moved
> > to gpio device node and initialized via gpio-ranges property.
> >
> > Shenwei Wang (5):
> > arm64: dts: imx8dxl-ss-lsio: add gpio-ranges property
> > arm64: dts: imx8qm-ss-lsio: add gpio-ranges property
> > arm64: dts: imx8qxp-ss-lsio: add gpio-ranges property
> > pinctrl: freescale: add pad wakeup config
> > gpio: mxc: enable pad wakeup on i.MX8x platforms
> >
> > .../boot/dts/freescale/imx8dxl-ss-lsio.dtsi | 41 +++++++++
> > .../boot/dts/freescale/imx8qm-ss-lsio.dtsi | 38 ++++++++
> > .../boot/dts/freescale/imx8qxp-ss-lsio.dtsi | 25 +++++
> > drivers/gpio/gpio-mxc.c | 92 ++++++++++++++++++-
> > drivers/pinctrl/freescale/pinctrl-scu.c | 30 ++++++
> > 5 files changed, 225 insertions(+), 1 deletion(-)
> >
> > --
> > 2.34.1
>
GPIO part looks good to me.
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@...aro.org>
Powered by blists - more mailing lists