| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20221103080525.26885-2-cai.huoqing@linux.dev>
Date: Thu, 3 Nov 2022 16:05:10 +0800
From: Cai Huoqing <cai.huoqing@...ux.dev>
To: kuba@...nel.org
Cc: Cai Huoqing <cai.huoqing@...ux.dev>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Paolo Abeni <pabeni@...hat.com>,
Zhengchao Shao <shaozhengchao@...wei.com>,
Qiao Ma <mqaio@...ux.alibaba.com>,
Bin Chen <bin.chen@...igine.com>, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH net-next v4 2/3] net: hinic: Add control command support for VF PMD driver in DPDK
HINIC has a mailbox for PF-VF communication and the VF driver
could send port control command to PF driver via mailbox.
The control command only can be set to register in PF,
so add support in PF driver for VF PMD driver control
command when VF PMD driver work with linux PF driver.
Then, no need to add handlers to nic_vf_cmd_msg_handler[],
because the host driver just forwards it to the firmware.
Actually the firmware works on a coprocessor MGMT_CPU(inside the NIC)
which will recv and deal with these commands.
Signed-off-by: Cai Huoqing <cai.huoqing@...ux.dev>
---
v1->v2:
1.Update the commit messsage.
2.Add net-next prefix.
The comments link: https://lore.kernel.org/lkml/20221031195805.74e22089@kernel.org/
v2->v3:
1.Merge PATCH 3/3 to this series.
.../net/ethernet/huawei/hinic/hinic_hw_dev.h | 66 +++++++++++++++++++
.../net/ethernet/huawei/hinic/hinic_sriov.c | 18 +++++
2 files changed, 84 insertions(+)
diff --git a/drivers/net/ethernet/huawei/hinic/hinic_hw_dev.h b/drivers/net/ethernet/huawei/hinic/hinic_hw_dev.h
index 6dae116a11f8..6b5797e69781 100644
--- a/drivers/net/ethernet/huawei/hinic/hinic_hw_dev.h
+++ b/drivers/net/ethernet/huawei/hinic/hinic_hw_dev.h
@@ -51,6 +51,9 @@ enum hinic_port_cmd {
HINIC_PORT_CMD_ADD_VLAN = 0x3,
HINIC_PORT_CMD_DEL_VLAN = 0x4,
+ HINIC_PORT_CMD_SET_ETS = 0x7,
+ HINIC_PORT_CMD_GET_ETS = 0x8,
+
HINIC_PORT_CMD_SET_PFC = 0x5,
HINIC_PORT_CMD_SET_MAC = 0x9,
@@ -59,6 +62,8 @@ enum hinic_port_cmd {
HINIC_PORT_CMD_SET_RX_MODE = 0xC,
+ HINIC_PORT_CMD_SET_ANTI_ATTACK_RATE = 0xD,
+
HINIC_PORT_CMD_GET_PAUSE_INFO = 0x14,
HINIC_PORT_CMD_SET_PAUSE_INFO = 0x15,
@@ -81,6 +86,7 @@ enum hinic_port_cmd {
HINIC_PORT_CMD_GET_RSS_TEMPLATE_INDIR_TBL = 0x25,
HINIC_PORT_CMD_SET_PORT_STATE = 0x29,
+ HINIC_PORT_CMD_GET_PORT_STATE = 0x30,
HINIC_PORT_CMD_SET_RSS_TEMPLATE_TBL = 0x2B,
@@ -100,17 +106,29 @@ enum hinic_port_cmd {
HINIC_PORT_CMD_RSS_CFG = 0x42,
+ HINIC_PORT_CMD_GET_PHY_TYPE = 0x44,
+
HINIC_PORT_CMD_FWCTXT_INIT = 0x45,
HINIC_PORT_CMD_GET_LOOPBACK_MODE = 0x48,
HINIC_PORT_CMD_SET_LOOPBACK_MODE = 0x49,
+ HINIC_PORT_CMD_GET_JUMBO_FRAME_SIZE = 0x4A,
+ HINIC_PORT_CMD_SET_JUMBO_FRAME_SIZE = 0x4B,
+
HINIC_PORT_CMD_ENABLE_SPOOFCHK = 0x4E,
HINIC_PORT_CMD_GET_MGMT_VERSION = 0x58,
+ HINIC_PORT_CMD_GET_PORT_TYPE = 0x5B,
+
HINIC_PORT_CMD_SET_FUNC_STATE = 0x5D,
+ HINIC_PORT_CMD_GET_PORT_ID_BY_FUNC_ID = 0x5E,
+
+ HINIC_PORT_CMD_GET_DMA_CS = 0x64,
+ HINIC_PORT_CMD_SET_DMA_CS = 0x65,
+
HINIC_PORT_CMD_GET_GLOBAL_QPN = 0x66,
HINIC_PORT_CMD_SET_VF_RATE = 0x69,
@@ -125,25 +143,73 @@ enum hinic_port_cmd {
HINIC_PORT_CMD_SET_RQ_IQ_MAP = 0x73,
+ HINIC_PORT_CMD_SET_PFC_THD = 0x75,
+
HINIC_PORT_CMD_LINK_STATUS_REPORT = 0xA0,
+ HINIC_PORT_CMD_SET_LOSSLESS_ETH = 0xA3,
+
HINIC_PORT_CMD_UPDATE_MAC = 0xA4,
HINIC_PORT_CMD_GET_CAP = 0xAA,
+ HINIC_PORT_CMD_UP_TC_ADD_FLOW = 0xAF,
+ HINIC_PORT_CMD_UP_TC_DEL_FLOW = 0xB0,
+ HINIC_PORT_CMD_UP_TC_GET_FLOW = 0xB1,
+
+ HINIC_PORT_CMD_UP_TC_FLUSH_TCAM = 0xB2,
+
+ HINIC_PORT_CMD_UP_TC_CTRL_TCAM_BLOCK = 0xB3,
+
+ HINIC_PORT_CMD_UP_TC_ENABLE = 0xB4,
+
+ HINIC_PORT_CMD_UP_TC_GET_TCAM_BLOCK = 0xB5,
+
+ HINIC_PORT_CMD_SET_IPSU_MAC = 0xCB,
+ HINIC_PORT_CMD_GET_IPSU_MAC = 0xCC,
+
+ HINIC_PORT_CMD_SET_XSFP_STATUS = 0xD4,
+
HINIC_PORT_CMD_GET_LINK_MODE = 0xD9,
HINIC_PORT_CMD_SET_SPEED = 0xDA,
HINIC_PORT_CMD_SET_AUTONEG = 0xDB,
+ HINIC_PORT_CMD_CLEAR_QP_RES = 0xDD,
+
+ HINIC_PORT_CMD_SET_SUPER_CQE = 0xDE,
+
+ HINIC_PORT_CMD_SET_VF_COS = 0xDF,
+ HINIC_PORT_CMD_GET_VF_COS = 0xE1,
+
+ HINIC_PORT_CMD_CABLE_PLUG_EVENT = 0xE5,
+
+ HINIC_PORT_CMD_LINK_ERR_EVENT = 0xE6,
+
+ HINIC_PORT_CMD_SET_COS_UP_MAP = 0xE8,
+
+ HINIC_PORT_CMD_RESET_LINK_CFG = 0xEB,
+
HINIC_PORT_CMD_GET_STD_SFP_INFO = 0xF0,
+ HINIC_PORT_CMD_FORCE_PKT_DROP = 0xF3,
+
HINIC_PORT_CMD_SET_LRO_TIMER = 0xF4,
+ HINIC_PORT_CMD_SET_VHD_CFG = 0xF7,
+
+ HINIC_PORT_CMD_SET_LINK_FOLLOW = 0xF8,
+
HINIC_PORT_CMD_SET_VF_MAX_MIN_RATE = 0xF9,
HINIC_PORT_CMD_GET_SFP_ABS = 0xFB,
+
+ HINIC_PORT_CMD_Q_FILTER = 0xFC,
+
+ HINIC_PORT_CMD_TCAM_FILTER = 0xFE,
+
+ HINIC_PORT_CMD_SET_VLAN_FILTER = 0xFF,
};
/* cmd of mgmt CPU message for HILINK module */
diff --git a/drivers/net/ethernet/huawei/hinic/hinic_sriov.c b/drivers/net/ethernet/huawei/hinic/hinic_sriov.c
index f7e05b41385b..ee357088d021 100644
--- a/drivers/net/ethernet/huawei/hinic/hinic_sriov.c
+++ b/drivers/net/ethernet/huawei/hinic/hinic_sriov.c
@@ -489,6 +489,24 @@ static struct vf_cmd_check_handle nic_cmd_support_vf[] = {
{HINIC_PORT_CMD_UPDATE_MAC, hinic_mbox_check_func_id_8B},
{HINIC_PORT_CMD_GET_CAP, hinic_mbox_check_func_id_8B},
{HINIC_PORT_CMD_GET_LINK_MODE, hinic_mbox_check_func_id_8B},
+ {HINIC_PORT_CMD_GET_VF_COS, NULL},
+ {HINIC_PORT_CMD_SET_VHD_CFG, hinic_mbox_check_func_id_8B},
+ {HINIC_PORT_CMD_SET_VLAN_FILTER, hinic_mbox_check_func_id_8B},
+ {HINIC_PORT_CMD_Q_FILTER, hinic_mbox_check_func_id_8B},
+ {HINIC_PORT_CMD_TCAM_FILTER, NULL},
+ {HINIC_PORT_CMD_UP_TC_ADD_FLOW, NULL},
+ {HINIC_PORT_CMD_UP_TC_DEL_FLOW, NULL},
+ {HINIC_PORT_CMD_UP_TC_FLUSH_TCAM, hinic_mbox_check_func_id_8B},
+ {HINIC_PORT_CMD_UP_TC_CTRL_TCAM_BLOCK, hinic_mbox_check_func_id_8B},
+ {HINIC_PORT_CMD_UP_TC_ENABLE, hinic_mbox_check_func_id_8B},
+ {HINIC_PORT_CMD_CABLE_PLUG_EVENT, NULL},
+ {HINIC_PORT_CMD_LINK_ERR_EVENT, NULL},
+ {HINIC_PORT_CMD_SET_PORT_STATE, hinic_mbox_check_func_id_8B},
+ {HINIC_PORT_CMD_SET_ETS, NULL},
+ {HINIC_PORT_CMD_SET_ANTI_ATTACK_RATE, NULL},
+ {HINIC_PORT_CMD_RESET_LINK_CFG, hinic_mbox_check_func_id_8B},
+ {HINIC_PORT_CMD_SET_LINK_FOLLOW, NULL},
+ {HINIC_PORT_CMD_CLEAR_QP_RES, NULL},
};
#define CHECK_IPSU_15BIT 0X8000
--
2.25.1
Powered by blists - more mailing lists