| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <8023f2f5-638d-e83f-ea27-d135202725f3@gpxsee.org>
Date: Fri, 4 Nov 2022 15:41:37 +0100
From: Martin Tůma <tumic@...see.org>
To: Hans Verkuil <hverkuil@...all.nl>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Michal Simek <michal.simek@...inx.com>
Cc: linux-media@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-i2c@...r.kernel.org, Lizhi Hou <lizhi.hou@....com>,
Martin Tůma <martin.tuma@...iteqautomotive.com>
Subject: Re: [PATCH v3 2/2] Added Digiteq Automotive MGB4 driver
On 04. 11. 22 12:14, Hans Verkuil wrote:
> On 18/10/2022 16:03, tumic@...see.org wrote:
>> From: Martin Tůma <martin.tuma@...iteqautomotive.com>
>>
>> Digiteq Automotive MGB4 is a modular frame grabber PCIe card for automotive
>> video interfaces. As for now, two modules - FPD-Link and GMSL - are
>> available and supported by the driver. The card has two inputs and two
>> outputs (FPD-Link only).
>>
>> In addition to the video interfaces it also provides a trigger signal
>> interface and a MTD interface for FPGA firmware upload.
>>
>> Signed-off-by: Martin Tůma <martin.tuma@...iteqautomotive.com>
>> ---
>> Documentation/admin-guide/media/mgb4.rst | 342 ++++++++
>> .../admin-guide/media/pci-cardlist.rst | 1 +
>> .../admin-guide/media/v4l-drivers.rst | 1 +
>> MAINTAINERS | 7 +
>> drivers/media/pci/Kconfig | 1 +
>> drivers/media/pci/Makefile | 1 +
>> drivers/media/pci/mgb4/Kconfig | 17 +
>> drivers/media/pci/mgb4/Makefile | 6 +
>> drivers/media/pci/mgb4/mgb4_cmt.c | 243 ++++++
>> drivers/media/pci/mgb4/mgb4_cmt.h | 16 +
>> drivers/media/pci/mgb4/mgb4_core.c | 628 +++++++++++++++
>> drivers/media/pci/mgb4/mgb4_core.h | 65 ++
>> drivers/media/pci/mgb4/mgb4_dma.c | 120 +++
>> drivers/media/pci/mgb4/mgb4_dma.h | 18 +
>> drivers/media/pci/mgb4/mgb4_i2c.c | 139 ++++
>> drivers/media/pci/mgb4/mgb4_i2c.h | 35 +
>> drivers/media/pci/mgb4/mgb4_io.h | 36 +
>> drivers/media/pci/mgb4/mgb4_regs.c | 30 +
>> drivers/media/pci/mgb4/mgb4_regs.h | 35 +
>> drivers/media/pci/mgb4/mgb4_sysfs.h | 18 +
>> drivers/media/pci/mgb4/mgb4_sysfs_in.c | 750 ++++++++++++++++++
>> drivers/media/pci/mgb4/mgb4_sysfs_out.c | 734 +++++++++++++++++
>> drivers/media/pci/mgb4/mgb4_sysfs_pci.c | 83 ++
>> drivers/media/pci/mgb4/mgb4_trigger.c | 203 +++++
>> drivers/media/pci/mgb4/mgb4_trigger.h | 8 +
>> drivers/media/pci/mgb4/mgb4_vin.c | 665 ++++++++++++++++
>> drivers/media/pci/mgb4/mgb4_vin.h | 64 ++
>> drivers/media/pci/mgb4/mgb4_vout.c | 507 ++++++++++++
>> drivers/media/pci/mgb4/mgb4_vout.h | 58 ++
>> 29 files changed, 4831 insertions(+)
>> create mode 100644 Documentation/admin-guide/media/mgb4.rst
>> create mode 100644 drivers/media/pci/mgb4/Kconfig
>> create mode 100644 drivers/media/pci/mgb4/Makefile
>> create mode 100644 drivers/media/pci/mgb4/mgb4_cmt.c
>> create mode 100644 drivers/media/pci/mgb4/mgb4_cmt.h
>> create mode 100644 drivers/media/pci/mgb4/mgb4_core.c
>> create mode 100644 drivers/media/pci/mgb4/mgb4_core.h
>> create mode 100644 drivers/media/pci/mgb4/mgb4_dma.c
>> create mode 100644 drivers/media/pci/mgb4/mgb4_dma.h
>> create mode 100644 drivers/media/pci/mgb4/mgb4_i2c.c
>> create mode 100644 drivers/media/pci/mgb4/mgb4_i2c.h
>> create mode 100644 drivers/media/pci/mgb4/mgb4_io.h
>> create mode 100644 drivers/media/pci/mgb4/mgb4_regs.c
>> create mode 100644 drivers/media/pci/mgb4/mgb4_regs.h
>> create mode 100644 drivers/media/pci/mgb4/mgb4_sysfs.h
>> create mode 100644 drivers/media/pci/mgb4/mgb4_sysfs_in.c
>> create mode 100644 drivers/media/pci/mgb4/mgb4_sysfs_out.c
>> create mode 100644 drivers/media/pci/mgb4/mgb4_sysfs_pci.c
>> create mode 100644 drivers/media/pci/mgb4/mgb4_trigger.c
>> create mode 100644 drivers/media/pci/mgb4/mgb4_trigger.h
>> create mode 100644 drivers/media/pci/mgb4/mgb4_vin.c
>> create mode 100644 drivers/media/pci/mgb4/mgb4_vin.h
>> create mode 100644 drivers/media/pci/mgb4/mgb4_vout.c
>> create mode 100644 drivers/media/pci/mgb4/mgb4_vout.h
>>
>> diff --git a/Documentation/admin-guide/media/mgb4.rst b/Documentation/admin-guide/media/mgb4.rst
>> new file mode 100644
>> index 000000000000..fa9966a53b96
>> --- /dev/null
>> +++ b/Documentation/admin-guide/media/mgb4.rst
>> @@ -0,0 +1,342 @@
>> +.. SPDX-License-Identifier: GPL-2.0
>> +
>> +====================
>> +mgb4 sysfs interface
>> +====================
>> +
>> +The mgb4 driver provides a sysfs interface, that is used to configure video
>> +stream related parameters (some of them must be set properly before the v4l2
>> +device can be opened) and obtain the video device/stream status.
>> +
>> +There are two types of parameters - global / PCI card related, found under
>> +``/sys/class/video4linux/videoX/device`` and module specific found under
>> +``/sys/class/video4linux/videoX``.
>> +
>> +
>> +Global (PCI card) parameters
>> +============================
>> +
>> +**module_type** (R):
>> + Module type.
>> +
>> + | 0 - No module present
>> + | 1 - FPDL3
>> + | 2 - GMSL
>> +
>> +**module_version** (R):
>> + Module version number. Zero in case of a missing module.
>> +
>> +**fw_type** (R):
>> + Firmware type.
>> +
>> + | 1 - FPDL3
>> + | 2 - GMSL
>> +
>> +**fw_version** (R):
>> + Firmware version number.
>> +
>> +**serial_number** (R):
>> + Card serial number. The format is::
>> +
>> + PRODUCT-REVISION-SERIES-SERIAL
>> +
>> + where each component is a 8b number.
>> +
>> +**temperature** (R):
>> + FPGA core temperature in Celsius degree.
>> +
>> +Common FPDL3/GMSL input parameters
>> +==================================
>> +
>> +**input_id** (R):
>> + Input number ID, zero based.
>> +
>> +**oldi_lane_width** (RW):
>> + Number of deserializer output lanes.
>> +
>> + | 0 - single
>> + | 1 - dual
>> +
>> +**color_mapping** (RW):
>> + Mapping of the incoming bits in the signal to the colour bits of the pixels.
>> +
>> + | 0 - OLDI/JEIDA
>> + | 1 - SPWG/VESA
>> +
>> +**link_status** (R):
>> + Video link status. If the link is locked, chips are properly connected and
>> + communicating at the same speed and protocol. The link can be locked without
>> + an active video stream.
>> +
>> + | 0 - unlocked
>> + | 1 - locked
>> +
>> +**stream_status** (R):
>> + Video stream status. A stream is detected if the link is locked, the input
>> + pixel clock is running and the DE signal is moving.
>> +
>> + | 0 - not detected
>> + | 1 - detected
>> +
>> +**vsync_status** (R):
>> + The type of VSYNC pulses as detected by the video format detector.
>> +
>> + | 0 - active low
>> + | 1 - active high
>> + | 2 - not available
>> +
>> +**hsync_status** (R):
>> + The type of HSYNC pulses as detected by the video format detector.
>> +
>> + | 0 - active low
>> + | 1 - active high
>> + | 2 - not available
>> +
>> +**vsync_gap_length** (RW):
>> + If the incoming video signal does not contain synchronization VSYNC and
>> + HSYNC pulses, these must be generated internally in the FPGA to achieve
>> + the correct frame ordering. This value indicates, how many "empty" pixels
>> + (pixels with deasserted Data Enable signal) are necessary to generate the
>> + internal VSYNC pulse.
>> +
>> +**hsync_gap_length** (RW):
>> + If the incoming video signal does not contain synchronization VSYNC and
>> + HSYNC pulses, these must be generated internally in the FPGA to achieve
>> + the correct frame ordering. This value indicates, how many "empty" pixels
>> + (pixels with deasserted Data Enable signal) are necessary to generate the
>> + internal HSYNC pulse. The value must be greater than 1 and smaller than
>> + vsync_gap_length.
>> +
>> +**pclk_frequency** (R):
>> + Input pixel clock frequency in kHz.
>> +
>> + *Note: The frequency_range parameter must be set properly first to get
>> + a valid frequency here.*
>> +
>> +**hsync_width** (R):
>> + Width of the HSYNC signal in PCLK clock ticks.
>> +
>> +**vsync_width** (R):
>> + Width of the VSYNC signal in PCLK clock ticks.
>> +
>> +**hback_porch** (R):
>> + Number of PCLK pulses between deassertion of the HSYNC signal and the first
>> + valid pixel in the video line (marked by DE=1).
>> +
>> +**hfront_porch** (R):
>> + Number of PCLK pulses between the end of the last valid pixel in the video
>> + line (marked by DE=1) and assertion of the HSYNC signal.
>> +
>> +**vback_porch** (R):
>> + Number of video lines between deassertion of the VSYNC signal and the video
>> + line with the first valid pixel (marked by DE=1).
>> +
>> +**vfront_porch** (R):
>> + Number of video lines between the end of the last valid pixel line (marked
>> + by DE=1) and assertion of the VSYNC signal.
>> +
>> +**frequency_range** (RW)
>> + PLL frequency range of the OLDI input clock generator. The PLL frequency is
>> + derived from the Pixel Clock Frequency (PCLK) and is equal to PCLK if
>> + oldi_lane_width is set to "single" and PCLK/2 if oldi_lane_width is set to
>> + "dual".
>> +
>> + | 0 - PLL < 50MHz
>> + | 1 - PLL >= 50MHz
>> +
>> + *Note: This parameter can not be changed while the input v4l2 device is
>> + open.*
>> +
>> +**alignment** (RW)
>> + Pixel line alignment. Sets the pixel line alignment in bytes of the frame
>> + buffers provided via the v4l2 interface. The number must be a power of 2.
>> +
>> + *Note: This parameter can not be changed while the input v4l2 device is
>> + open.*
>> +
>> +Common FPDL3/GMSL output parameters
>> +===================================
>> +
>> +**output_id** (R):
>> + Output number ID, zero based.
>> +
>> +**video_source** (RW):
>> + Output video source. If set to 0 or 1, the source is the corresponding card
>> + input and the v4l2 output devices are disabled. If set to 2 or 3, the source
>> + is the corresponding v4l2 video output device.
>> +
>> + | 0 - input 0
>> + | 1 - input 1
>> + | 2 - v4l2 output 0
>> + | 3 - v4l2 output 1
>> +
>> + *Note: This parameter can not be changed while ANY of the input/output v4l2
>> + devices is open.*
>> +
>> +**display_width** (RW):
>> + Display width. There is no autodetection of the connected display, so the
>> + propper value must be set before the start of streaming.
>> +
>> + *Note: This parameter can not be changed while the output v4l2 device is
>> + open.*
>> +
>> +**display_height** (RW):
>> + Display height. There is no autodetection of the connected display, so the
>> + propper value must be set before the start of streaming.
>> +
>> + *Note: This parameter can not be changed while the output v4l2 device is
>> + open.*
>> +
>> +**frame_rate** (RW):
>> + Output video frame rate in frames per second.
>> +
>> +**hsync_polarity** (RW):
>> + HSYNC signal polarity.
>> +
>> + | 0 - active low
>> + | 1 - active high
>> +
>> +**vsync_polarity** (RW):
>> + VSYNC signal polarity.
>> +
>> + | 0 - active low
>> + | 1 - active high
>> +
>> +**de_polarity** (RW):
>> + DE signal polarity.
>> +
>> + | 0 - active low
>> + | 1 - active high
>> +
>> +**pclk_frequency** (RW):
>> + Output pixel clock frequency. Allowed values are between 25000-190000(kHz)
>> + and there is a non-linear stepping between two consecutive allowed
>> + frequencies. The driver finds the nearest allowed frequency to the given
>> + value and sets it. When reading this property, you get the exact
>> + frequency set by the driver.
>> +
>> + *Note: This parameter can not be changed while the output v4l2 device is
>> + open.*
>> +
>> +**hsync_width** (RW):
>> + Width of the HSYNC signal in PCLK clock ticks.
>> +
>> +**vsync_width** (RW):
>> + Width of the VSYNC signal in PCLK clock ticks.
>> +
>> +**hback_porch** (RW):
>> + Number of PCLK pulses between deassertion of the HSYNC signal and the first
>> + valid pixel in the video line (marked by DE=1).
>> +
>> +**hfront_porch** (RW):
>> + Number of PCLK pulses between the end of the last valid pixel in the video
>> + line (marked by DE=1) and assertion of the HSYNC signal.
>> +
>> +**vback_porch** (RW):
>> + Number of video lines between deassertion of the VSYNC signal and the video
>> + line with the first valid pixel (marked by DE=1).
>> +
>> +**vfront_porch** (RW):
>> + Number of video lines between the end of the last valid pixel line (marked
>> + by DE=1) and assertion of the VSYNC signal.
>> +
>> +**alignment** (RW)
>> + Pixel line alignment. Sets the pixel line alignment in bytes of the frame
>> + buffers provided via the v4l2 interface. The number must be a power of 2.
>> +
>> + *Note: This parameter can not be changed while the output v4l2 device is
>> + open.*
>> +
>> + *Note: This parameter can not be changed when loopback mode is active
>> + (video_source is 0 or 1). When loopback mode is enabled, the alignment is
>> + automatically set to the alignment of the input device.*
>> +
>> +FPDL3 specific input parameters
>> +===============================
>> +
>> +**fpdl3_input_width** (RW):
>> + Number of deserializer input lines.
>> +
>> + | 0 - auto
>> + | 1 - single
>> + | 2 - dual
>> +
>> +FPDL3 specific output parameters
>> +================================
>> +
>> +**fpdl3_output_width** (RW):
>> + Number of serializer output lines.
>> +
>> + | 0 - auto
>> + | 1 - single
>> + | 2 - dual
>> +
>> +GMSL specific input parameters
>> +==============================
>> +
>> +**gmsl_mode** (RW):
>> + GMSL speed mode.
>> +
>> + | 0 - 12Gb/s
>> + | 1 - 6Gb/s
>> + | 2 - 3Gb/s
>> + | 3 - 1.5Gb/s
>> +
>> +**gmsl_stream_id** (RW):
>> + The GMSL multi-stream contains up to four video streams. This parameter
>> + selects which stream is captured by the video input. The value is the
>> + zero-based index of the stream.
>> +
>> + *Note: This parameter can not be changed while the input v4l2 device is
>> + open.*
>> +
>> +**gmsl_fec** (RW):
>> + GMSL Forward Error Correction (FEC).
>> +
>> + | 0 - disabled
>> + | 1 - enabled
>> +
>> +
>> +====================
>> +mgb4 mtd partitions
>> +====================
>> +
>> +The mgb4 driver creates a MTD device with two partitions:
>> + - mgb4-fw.X - FPGA firmware.
>> + - mgb4-data.X - Factory settings, e.g. card serial number.
>> +
>> +The *mgb4-fw* partition is writable and is used for FW updates, *mgb4-data* is
>> +read-only. The *X* attached to the partition name represents the card number.
>> +Depending on the CONFIG_MTD_PARTITIONED_MASTER kernel configuration, you may
>> +also have a third partition named *mgb4-flash* available in the system. This
>> +partition represents the whole, unpartitioned, card's FLASH memory and one should
>> +not fiddle with it...
>> +
>> +====================
>> +mgb4 iio (triggers)
>> +====================
>> +
>> +The mgb4 driver creates an Industrial I/O (IIO) device that provides trigger and
>> +signal level status capability. The following scan elements are available:
>> +
>> +**activity**:
>> + The trigger levels and pending status.
>> +
>> + | bit 1 - trigger 1 pending
>> + | bit 2 - trigger 2 pending
>> + | bit 5 - trigger 1 level
>> + | bit 6 - trigger 2 level
>> +
>> +**timestamp**:
>> + The trigger event timestamp.
>> +
>> +The iio device can operate either in "raw" mode where you can fetch the signal
>> +levels (activity bits 5 and 6) using sysfs access or in triggered buffer mode.
>> +In the triggered buffer mode you can follow the signal level changes (activity
>> +bits 1 and 2) using the iio device in /dev. If you enable the timestamps, you
>> +will also get the exact trigger event time that can be matched to a video frame
>> +(every mgb4 video frame has a timestamp with the same clock source).
>> +
>> +*Note: although the activity sample always contains all the status bits, it makes
>> +no sense to get the pending bits in raw mode or the level bits in the triggered
>> +buffer mode - the values do not represent valid data in such case.*
>> diff --git a/Documentation/admin-guide/media/pci-cardlist.rst b/Documentation/admin-guide/media/pci-cardlist.rst
>> index f4d670e632f8..220f12c0bc37 100644
>> --- a/Documentation/admin-guide/media/pci-cardlist.rst
>> +++ b/Documentation/admin-guide/media/pci-cardlist.rst
>> @@ -78,6 +78,7 @@ ivtv Conexant cx23416/cx23415 MPEG encoder/decoder
>> ivtvfb Conexant cx23415 framebuffer
>> mantis MANTIS based cards
>> meye Sony Vaio Picturebook Motion Eye
>> +mgb4 Digiteq Automotive MGB4 frame grabber
>> mxb Siemens-Nixdorf 'Multimedia eXtension Board'
>> netup-unidvb NetUP Universal DVB card
>> ngene Micronas nGene
>> diff --git a/Documentation/admin-guide/media/v4l-drivers.rst b/Documentation/admin-guide/media/v4l-drivers.rst
>> index 9c7ebe2ca3bd..96b2d662ace0 100644
>> --- a/Documentation/admin-guide/media/v4l-drivers.rst
>> +++ b/Documentation/admin-guide/media/v4l-drivers.rst
>> @@ -20,6 +20,7 @@ Video4Linux (V4L) driver-specific documentation
>> ipu3
>> ivtv
>> meye
>> + mgb4
>> omap3isp
>> omap4_camera
>> philips
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index 07938eab80dd..0e3564888649 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -6092,6 +6092,13 @@ L: linux-gpio@...r.kernel.org
>> S: Maintained
>> F: drivers/gpio/gpio-gpio-mm.c
>>
>> +DIGITEQ AUTOMOTIVE MGB4 V4L2 DRIVER
>> +M: Martin Tuma <martin.tuma@...iteqautomotive.com>
>> +L: linux-media@...r.kernel.org
>> +S: Maintained
>> +F: Documentation/admin-guide/media/mgb4.rst
>> +F: drivers/media/pci/mgb4/
>> +
>> DIOLAN U2C-12 I2C DRIVER
>> M: Guenter Roeck <linux@...ck-us.net>
>> L: linux-i2c@...r.kernel.org
>> diff --git a/drivers/media/pci/Kconfig b/drivers/media/pci/Kconfig
>> index dff0b450f387..072543b32337 100644
>> --- a/drivers/media/pci/Kconfig
>> +++ b/drivers/media/pci/Kconfig
>> @@ -13,6 +13,7 @@ if MEDIA_PCI_SUPPORT
>> if MEDIA_CAMERA_SUPPORT
>> comment "Media capture support"
>>
>> +source "drivers/media/pci/mgb4/Kconfig"
>> source "drivers/media/pci/solo6x10/Kconfig"
>> source "drivers/media/pci/sta2x11/Kconfig"
>> source "drivers/media/pci/tw5864/Kconfig"
>> diff --git a/drivers/media/pci/Makefile b/drivers/media/pci/Makefile
>> index 8f887a8a7f17..e2942a2ab2fc 100644
>> --- a/drivers/media/pci/Makefile
>> +++ b/drivers/media/pci/Makefile
>> @@ -30,6 +30,7 @@ obj-$(CONFIG_VIDEO_CX25821) += cx25821/
>> obj-$(CONFIG_VIDEO_CX88) += cx88/
>> obj-$(CONFIG_VIDEO_DT3155) += dt3155/
>> obj-$(CONFIG_VIDEO_IVTV) += ivtv/
>> +obj-$(CONFIG_VIDEO_MGB4) += mgb4/
>> obj-$(CONFIG_VIDEO_SAA7134) += saa7134/
>> obj-$(CONFIG_VIDEO_SAA7164) += saa7164/
>> obj-$(CONFIG_VIDEO_SOLO6X10) += solo6x10/
>> diff --git a/drivers/media/pci/mgb4/Kconfig b/drivers/media/pci/mgb4/Kconfig
>> new file mode 100644
>> index 000000000000..13fad15a434c
>> --- /dev/null
>> +++ b/drivers/media/pci/mgb4/Kconfig
>> @@ -0,0 +1,17 @@
>> +# SPDX-License-Identifier: GPL-2.0-only
>> +config VIDEO_MGB4
>> + tristate "Digiteq Automotive MGB4 support"
>> + depends on VIDEO_DEV && PCI && I2C && DMADEVICES && SPI && MTD && IIO
>> + select VIDEOBUF2_DMA_SG
>> + select IIO_BUFFER
>> + select IIO_TRIGGERED_BUFFER
>> + select I2C_XILINX
>> + select SPI_XILINX
>> + select MTD_SPI_NOR
>> + select XILINX_XDMA
>> + help
>> + This is a video4linux driver for Digiteq Automotive MGB4 grabber
>> + cards.
>> +
>> + To compile this driver as a module, choose M here: the
>> + module will be called mgb4.
>> diff --git a/drivers/media/pci/mgb4/Makefile b/drivers/media/pci/mgb4/Makefile
>> new file mode 100644
>> index 000000000000..e92ead18bed0
>> --- /dev/null
>> +++ b/drivers/media/pci/mgb4/Makefile
>> @@ -0,0 +1,6 @@
>> +# SPDX-License-Identifier: GPL-2.0
>> +mgb4-objs := mgb4_regs.o mgb4_core.o mgb4_vin.o mgb4_vout.o \
>> + mgb4_sysfs_pci.o mgb4_sysfs_in.o mgb4_sysfs_out.o \
>> + mgb4_i2c.o mgb4_cmt.o mgb4_trigger.o mgb4_dma.o
>> +
>> +obj-$(CONFIG_VIDEO_MGB4) += mgb4.o
>> diff --git a/drivers/media/pci/mgb4/mgb4_cmt.c b/drivers/media/pci/mgb4/mgb4_cmt.c
>> new file mode 100644
>> index 000000000000..3ec394e46bd0
>> --- /dev/null
>> +++ b/drivers/media/pci/mgb4/mgb4_cmt.c
>> @@ -0,0 +1,243 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (C) 2021-2022 Digiteq Automotive
>> + * author: Martin Tuma <martin.tuma@...iteqautomotive.com>
>> + */
>> +
>> +#include <linux/types.h>
>> +#include <linux/kernel.h>
>> +#include "mgb4_core.h"
>> +#include "mgb4_cmt.h"
>> +
>
> Erm, what is CMT and where do the values in the tables below come from?
>
The CMT table is used to set up some FPGA PLL related registers. For
different video signal frequencies (FPGA input signal frequencies), the
FPGA PLL stuff needs to be adjusted to work properly. The values are
precomputed based on some formulas given by Xilinx in their FPGA
documentation and those formulas are in turn full of some magic
values/tables. So the answer to your question is that no one (not even
our HW engineer writing the VHDL code...) really knows where these
values exactly come from, but they have to be set for the FPGA to work
properly with the given video signal.
>> +static const uint16_t cmt_vals_out[][15] = {
>> + {0x1208, 0x0000, 0x171C, 0x0000, 0x1E38, 0x0000, 0x11C7, 0x0000, 0x1041, 0x01BC, 0x7C01, 0x7DE9, 0xFFFF, 0x9900, 0x8100, },
>> + {0x11C7, 0x0000, 0x1619, 0x0080, 0x1C71, 0x0000, 0x130D, 0x0080, 0x0041, 0x0090, 0x7C01, 0x7DE9, 0xFFFF, 0x1100, 0x9000, },
>> + {0x11C7, 0x0000, 0x1619, 0x0080, 0x1C71, 0x0000, 0x165A, 0x0080, 0x0082, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x1000, 0x9000, },
>> + {0x11C7, 0x0000, 0x1619, 0x0080, 0x1C71, 0x0000, 0x1187, 0x0080, 0x1041, 0x01EE, 0x7C01, 0x7DE9, 0xFFFF, 0x9900, 0x8100, },
>> + {0x1186, 0x0000, 0x1555, 0x0000, 0x1AAA, 0x0000, 0x1451, 0x0000, 0x0042, 0x0013, 0x7C01, 0x7DE9, 0xFFFF, 0x0900, 0x1000, },
>> + {0x11C7, 0x0000, 0x1619, 0x0080, 0x1C71, 0x0000, 0x134E, 0x0080, 0x0041, 0x005E, 0x7C01, 0x7DE9, 0xFFFF, 0x0900, 0x1000, },
>> + {0x1145, 0x0000, 0x1452, 0x0080, 0x18E3, 0x0000, 0x1619, 0x0080, 0x0083, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x1000, 0x9000, },
>> + {0x1145, 0x0000, 0x1452, 0x0080, 0x18E3, 0x0000, 0x179E, 0x0000, 0x00C3, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x0800, 0x1000, },
>> + {0x1145, 0x0000, 0x1452, 0x0080, 0x18E3, 0x0000, 0x179F, 0x0080, 0x00C3, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x0800, 0x1000, },
>> + {0x1145, 0x0000, 0x1452, 0x0080, 0x18E3, 0x0000, 0x17DF, 0x0000, 0x00C3, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x1000, 0x8800, },
>> + {0x1145, 0x0000, 0x1452, 0x0080, 0x18E3, 0x0000, 0x128B, 0x0080, 0x0041, 0x00DB, 0x7C01, 0x7DE9, 0xFFFF, 0x9000, 0x0100, },
>> + {0x1186, 0x0000, 0x1555, 0x0000, 0x1AAA, 0x0000, 0x1820, 0x0000, 0x0083, 0x00FA, 0x7DE9, 0x7DE8, 0xFFFF, 0x0900, 0x9000, },
>> + {0x1186, 0x0000, 0x1555, 0x0000, 0x1AAA, 0x0000, 0x1187, 0x0080, 0x1041, 0x01EE, 0x7C01, 0x7DE9, 0xFFFF, 0x9900, 0x8100, },
>> + {0x1104, 0x0000, 0x138E, 0x0000, 0x171C, 0x0000, 0x169B, 0x0080, 0x00C3, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x1800, 0x0100, },
>> + {0x1145, 0x0000, 0x1452, 0x0080, 0x18E3, 0x0000, 0x171C, 0x0000, 0x0083, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x1100, 0x1800, },
>> + {0x1186, 0x0000, 0x1555, 0x0000, 0x1AAA, 0x0000, 0x1515, 0x0080, 0x0042, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x0900, 0x1000, },
>> + {0x1104, 0x0000, 0x138E, 0x0000, 0x171C, 0x0000, 0x1493, 0x0080, 0x0082, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x0900, 0x1000, },
>> + {0x1145, 0x0000, 0x1452, 0x0080, 0x18E3, 0x0000, 0x15D8, 0x0080, 0x0082, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x1900, 0x0100, },
>> + {0x1104, 0x0000, 0x138E, 0x0000, 0x171C, 0x0000, 0x124A, 0x0080, 0x0041, 0x010D, 0x7C01, 0x7DE9, 0xFFFF, 0x9000, 0x0100, },
>> + {0x1104, 0x0000, 0x138E, 0x0000, 0x171C, 0x0000, 0x175D, 0x0000, 0x00C3, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x0800, 0x1000, },
>> + {0x1145, 0x0000, 0x1452, 0x0080, 0x18E3, 0x0000, 0x1619, 0x0080, 0x0082, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x1000, 0x9000, },
>> + {0x1145, 0x0000, 0x1452, 0x0080, 0x18E3, 0x0000, 0x17DF, 0x0000, 0x0083, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x1000, 0x8800, },
>> + {0x1145, 0x0000, 0x1452, 0x0080, 0x18E3, 0x0000, 0x17E0, 0x0080, 0x0083, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x0900, 0x9000, },
>> + {0x1145, 0x0000, 0x1452, 0x0080, 0x18E3, 0x0000, 0x1820, 0x0000, 0x0083, 0x00FA, 0x7DE9, 0x7DE8, 0xFFFF, 0x0900, 0x9000, },
>> + {0x1104, 0x0000, 0x138E, 0x0000, 0x171C, 0x0000, 0x13D0, 0x0080, 0x0042, 0x002C, 0x7C01, 0x7DE9, 0xFFFF, 0x0900, 0x1000, },
>> + {0x1104, 0x0000, 0x138E, 0x0000, 0x171C, 0x0000, 0x128B, 0x0080, 0x0041, 0x00DB, 0x7C01, 0x7DE9, 0xFFFF, 0x9000, 0x0100, },
>> + {0x1104, 0x0000, 0x138E, 0x0000, 0x171C, 0x0000, 0x1820, 0x0000, 0x00C3, 0x00FA, 0x7DE9, 0x7DE8, 0xFFFF, 0x0900, 0x9000, },
>> + {0x1145, 0x0000, 0x1452, 0x0080, 0x18E3, 0x0000, 0x134E, 0x0080, 0x0041, 0x005E, 0x7C01, 0x7DE9, 0xFFFF, 0x0900, 0x1000, },
>> + {0x1145, 0x0000, 0x1452, 0x0080, 0x18E3, 0x0000, 0x1515, 0x0080, 0x0042, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x0900, 0x1000, },
>> + {0x10C3, 0x0000, 0x128B, 0x0080, 0x1555, 0x0000, 0x175D, 0x0000, 0x00C4, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x0800, 0x1000, },
>> + {0x1145, 0x0000, 0x1452, 0x0080, 0x18E3, 0x0000, 0x11C7, 0x0000, 0x1041, 0x01BC, 0x7C01, 0x7DE9, 0xFFFF, 0x9900, 0x8100, },
>> + {0x10C3, 0x0000, 0x128B, 0x0080, 0x1555, 0x0000, 0x1209, 0x0080, 0x0041, 0x013F, 0x7C01, 0x7DE9, 0xFFFF, 0x9900, 0x1100, },
>> + {0x10C3, 0x0000, 0x128B, 0x0080, 0x1555, 0x0000, 0x1556, 0x0080, 0x0083, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x0800, 0x8000, },
>> + {0x10C3, 0x0000, 0x128B, 0x0080, 0x1555, 0x0000, 0x179F, 0x0080, 0x00C4, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x0800, 0x1000, },
>> + {0x1104, 0x0000, 0x138E, 0x0000, 0x171C, 0x0000, 0x15D8, 0x0080, 0x0082, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x1900, 0x0100, },
>> + {0x10C3, 0x0000, 0x128B, 0x0080, 0x1555, 0x0000, 0x1105, 0x0080, 0x1041, 0x01E8, 0x6401, 0x65E9, 0xFFFF, 0x9800, 0x1100, },
>> + {0x10C3, 0x0000, 0x128B, 0x0080, 0x1555, 0x0000, 0x1820, 0x0000, 0x00C4, 0x00FA, 0x7DE9, 0x7DE8, 0xFFFF, 0x0900, 0x9000, },
>> + {0x1104, 0x0000, 0x138E, 0x0000, 0x171C, 0x0000, 0x1493, 0x0080, 0x0042, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x0900, 0x1000, },
>> + {0x10C3, 0x0000, 0x128B, 0x0080, 0x1555, 0x0000, 0x138E, 0x0000, 0x0042, 0x005E, 0x7C01, 0x7DE9, 0xFFFF, 0x0900, 0x1000, },
>> + {0x1104, 0x0000, 0x138E, 0x0000, 0x171C, 0x0000, 0x17E0, 0x0080, 0x0083, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x0900, 0x9000, },
>> + {0x1104, 0x0000, 0x138E, 0x0000, 0x171C, 0x0000, 0x165A, 0x0080, 0x0082, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x1000, 0x9000, },
>> + {0x10C3, 0x0000, 0x128B, 0x0080, 0x1555, 0x0000, 0x175D, 0x0000, 0x00C3, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x0800, 0x1000, },
>> + {0x1104, 0x0000, 0x138E, 0x0000, 0x171C, 0x0000, 0x1187, 0x0080, 0x1041, 0x01EE, 0x7C01, 0x7DE9, 0xFFFF, 0x9900, 0x8100, },
>> + {0x10C3, 0x0000, 0x128B, 0x0080, 0x1555, 0x0000, 0x175E, 0x0080, 0x00C3, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x0800, 0x1000, },
>> + {0x10C3, 0x0000, 0x128B, 0x0080, 0x1555, 0x0000, 0x179E, 0x0000, 0x00C3, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x0800, 0x1000, },
>> + {0x1104, 0x0000, 0x138E, 0x0000, 0x171C, 0x0000, 0x134E, 0x0080, 0x0041, 0x005E, 0x7C01, 0x7DE9, 0xFFFF, 0x0900, 0x1000, },
>> + {0x10C3, 0x0000, 0x128B, 0x0080, 0x1555, 0x0000, 0x165A, 0x0080, 0x0083, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x1000, 0x9000, },
>> + {0x1104, 0x0000, 0x138E, 0x0000, 0x171C, 0x0000, 0x16DC, 0x0080, 0x0082, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x1100, 0x1800, },
>> + {0x10C3, 0x0000, 0x128B, 0x0080, 0x1555, 0x0000, 0x169A, 0x0000, 0x0083, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x1000, 0x9000, },
>> + {0x1104, 0x0000, 0x138E, 0x0000, 0x171C, 0x0000, 0x11C7, 0x0000, 0x1041, 0x01BC, 0x7C01, 0x7DE9, 0xFFFF, 0x9900, 0x8100, },
>> + {0x10C3, 0x0000, 0x128B, 0x0080, 0x1555, 0x0000, 0x169B, 0x0080, 0x0083, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x1800, 0x0100, },
>> + {0x1104, 0x0000, 0x138E, 0x0000, 0x171C, 0x0000, 0x171D, 0x0080, 0x0082, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x1100, 0x1800, },
>> + {0x10C3, 0x0000, 0x128B, 0x0080, 0x1555, 0x0000, 0x16DB, 0x0000, 0x0083, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x1800, 0x0100, },
>> + {0x10C3, 0x0000, 0x128B, 0x0080, 0x1555, 0x0000, 0x1146, 0x0080, 0x1041, 0x0184, 0x7C01, 0x7DE9, 0xFFFF, 0x9900, 0x8100, },
>> + {0x10C3, 0x0000, 0x128B, 0x0080, 0x1555, 0x0000, 0x171C, 0x0000, 0x0083, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x1100, 0x1800, },
>> + {0x10C3, 0x0000, 0x128B, 0x0080, 0x1555, 0x0000, 0x1451, 0x0000, 0x0042, 0x0013, 0x7C01, 0x7DE9, 0xFFFF, 0x0900, 0x1000, },
>> + {0x10C3, 0x0000, 0x128B, 0x0080, 0x1555, 0x0000, 0x171D, 0x0080, 0x0083, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x1100, 0x1800, },
>> + {0x10C3, 0x0000, 0x128B, 0x0080, 0x1555, 0x0000, 0x175D, 0x0000, 0x0083, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x0800, 0x1000, },
>> + {0x10C3, 0x0000, 0x128B, 0x0080, 0x1555, 0x0000, 0x1452, 0x0080, 0x0042, 0x0013, 0x7C01, 0x7DE9, 0xFFFF, 0x0900, 0x1000, },
>> + {0x10C3, 0x0000, 0x128B, 0x0080, 0x1555, 0x0000, 0x15D8, 0x0080, 0x0082, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x1900, 0x0100, },
>> + {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x1104, 0x0000, 0x1041, 0x01E8, 0x5801, 0x59E9, 0xFFFF, 0x9900, 0x0900, },
>> + {0x10C3, 0x0000, 0x128B, 0x0080, 0x1555, 0x0000, 0x179F, 0x0080, 0x0083, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x0800, 0x1000, },
>> + {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x1515, 0x0080, 0x0083, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x0900, 0x1000, },
>> + {0x10C3, 0x0000, 0x128B, 0x0080, 0x1555, 0x0000, 0x17DF, 0x0000, 0x0083, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x1000, 0x8800, },
>> + {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x1659, 0x0000, 0x00C3, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x1000, 0x9000, },
>> + {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x1555, 0x0000, 0x0083, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x0800, 0x8000, },
>> + {0x10C3, 0x0000, 0x128B, 0x0080, 0x1555, 0x0000, 0x14D3, 0x0000, 0x0042, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x0900, 0x1000, },
>> + {0x10C3, 0x0000, 0x128B, 0x0080, 0x1555, 0x0000, 0x1820, 0x0000, 0x0083, 0x00FA, 0x7DE9, 0x7DE8, 0xFFFF, 0x0900, 0x9000, },
>> + {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x1556, 0x0080, 0x0083, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x0800, 0x8000, },
>> + {0x10C3, 0x0000, 0x128B, 0x0080, 0x1555, 0x0000, 0x1187, 0x0080, 0x1041, 0x01EE, 0x7C01, 0x7DE9, 0xFFFF, 0x9900, 0x8100, },
>> + {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x1452, 0x0080, 0x0082, 0x0013, 0x7C01, 0x7DE9, 0xFFFF, 0x0900, 0x1000, },
>> + {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x169B, 0x0080, 0x00C3, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x1800, 0x0100, },
>> + {0x10C3, 0x0000, 0x128B, 0x0080, 0x1555, 0x0000, 0x1514, 0x0000, 0x0042, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x0900, 0x1000, },
>> + {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x17E0, 0x0080, 0x00C4, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x0900, 0x9000, },
>> + {0x10C3, 0x0000, 0x128B, 0x0080, 0x1555, 0x0000, 0x1515, 0x0080, 0x0042, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x0900, 0x1000, },
>> + {0x10C3, 0x0000, 0x128B, 0x0080, 0x1555, 0x0000, 0x16DC, 0x0080, 0x0082, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x1100, 0x1800, },
>> + {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x1493, 0x0080, 0x0082, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x0900, 0x1000, },
>> + {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x171C, 0x0000, 0x00C3, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x1100, 0x1800, },
>> + {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x15D8, 0x0080, 0x0083, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x1900, 0x0100, },
>> + {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x171D, 0x0080, 0x00C3, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x1100, 0x1800, },
>> + {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x1618, 0x0000, 0x0083, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x1900, 0x0100, },
>> + {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x175D, 0x0000, 0x00C3, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x0800, 0x1000, },
>> + {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x14D4, 0x0080, 0x0082, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x0900, 0x1000, },
>> + {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x1619, 0x0080, 0x0083, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x1000, 0x9000, },
>> + {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x179E, 0x0000, 0x00C3, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x0800, 0x1000, },
>> + {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x179F, 0x0080, 0x00C3, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x0800, 0x1000, },
>> + {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x1515, 0x0080, 0x0082, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x0900, 0x1000, },
>> + {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x13D0, 0x0080, 0x0042, 0x002C, 0x7C01, 0x7DE9, 0xFFFF, 0x0900, 0x1000, },
>> + {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x169A, 0x0000, 0x0083, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x1000, 0x9000, },
>> + {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x128B, 0x0080, 0x0041, 0x00DB, 0x7C01, 0x7DE9, 0xFFFF, 0x9000, 0x0100, },
>> + {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x169B, 0x0080, 0x0083, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x1800, 0x0100, },
>> + {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x1820, 0x0000, 0x00C3, 0x00FA, 0x7DE9, 0x7DE8, 0xFFFF, 0x0900, 0x9000, },
>> + {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x1556, 0x0080, 0x0082, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x0800, 0x8000, },
>> + {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x16DB, 0x0000, 0x0083, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x1800, 0x0100, },
>> + {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x1411, 0x0080, 0x0042, 0x002C, 0x7C01, 0x7DE9, 0xFFFF, 0x0900, 0x1000, },
>> + {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x171C, 0x0000, 0x0083, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x1100, 0x1800, },
>> + {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x1597, 0x0080, 0x0082, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x0800, 0x8000, },
>> + {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x1451, 0x0000, 0x0042, 0x0013, 0x7C01, 0x7DE9, 0xFFFF, 0x0900, 0x1000, },
>> + {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x171D, 0x0080, 0x0083, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x1100, 0x1800, },
>> + {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x12CC, 0x0080, 0x0041, 0x00A9, 0x7C01, 0x7DE9, 0xFFFF, 0x1100, 0x9000, },
>> + {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x175D, 0x0000, 0x0083, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x0800, 0x1000, },
>> + {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x1452, 0x0080, 0x0042, 0x0013, 0x7C01, 0x7DE9, 0xFFFF, 0x0900, 0x1000, },
>> + {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x15D8, 0x0080, 0x0082, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x1900, 0x0100, },
>> + {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x175E, 0x0080, 0x0083, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x0800, 0x1000, },
>> + {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x1492, 0x0000, 0x0042, 0x0013, 0x7C01, 0x7DE9, 0xFFFF, 0x0900, 0x1000, },
>> + {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x179F, 0x0080, 0x0083, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x0800, 0x1000, },
>> + {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x1619, 0x0080, 0x0082, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x1000, 0x9000, },
>> + {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x1493, 0x0080, 0x0042, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x0900, 0x1000, },
>> + {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x17DF, 0x0000, 0x0083, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x1000, 0x8800, },
>> + {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x130D, 0x0080, 0x0041, 0x0090, 0x7C01, 0x7DE9, 0xFFFF, 0x1100, 0x9000, },
>> + {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x17E0, 0x0080, 0x0083, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x0900, 0x9000, },
>> + {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x14D3, 0x0000, 0x0042, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x0900, 0x1000, },
>> + {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x165A, 0x0080, 0x0082, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x1000, 0x9000, },
>> + {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x1820, 0x0000, 0x0083, 0x00FA, 0x7DE9, 0x7DE8, 0xFFFF, 0x0900, 0x9000, },
>> + {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x14D4, 0x0080, 0x0042, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x0900, 0x1000, },
>> + {0x1082, 0x0000, 0x11C7, 0x0000, 0x138E, 0x0000, 0x169B, 0x0080, 0x0082, 0x00FA, 0x7C01, 0x7DE9, 0xFFFF, 0x1800, 0x0100, },
>> +};
>> +
>> +static const uint16_t cmt_vals_in[][13] = {
>> + {0x1082, 0x0000, 0x5104, 0x0000, 0x11C7, 0x0000, 0x1041, 0x02BC, 0x7C01, 0xFFE9, 0x9900, 0x9908, 0x8100},
>> + {0x1104, 0x0000, 0x9208, 0x0000, 0x138E, 0x0000, 0x1041, 0x015E, 0x7C01, 0xFFE9, 0x0100, 0x0908, 0x1000},
>> +};
>> +
>> +static const uint32_t cmt_addrs_out[][15] = {
>> + {0x420, 0x424, 0x428, 0x42C, 0x430, 0x434, 0x450, 0x454, 0x458, 0x460, 0x464, 0x468, 0x4A0, 0x538, 0x53C},
>> + {0x620, 0x624, 0x628, 0x62C, 0x630, 0x634, 0x650, 0x654, 0x658, 0x660, 0x664, 0x668, 0x6A0, 0x738, 0x73C},
>> +};
>> +
>> +static const uint32_t cmt_addrs_in[][13] = {
>> + {0x020, 0x024, 0x028, 0x02C, 0x050, 0x054, 0x058, 0x060, 0x064, 0x068, 0x0A0, 0x138, 0x13C},
>> + {0x220, 0x224, 0x228, 0x22C, 0x250, 0x254, 0x258, 0x260, 0x264, 0x268, 0x2A0, 0x338, 0x33C},
>> +};
>> +
>> +static const uint32_t cmt_freq[] = {
>> + 25000, 25510, 26020, 26530, 26983, 27551, 28000, 28570,
>> + 29046, 29522, 30000, 30476, 30952, 31546, 32000, 32539,
>> + 33035, 33571, 33928, 34522, 35000, 35428, 36000, 36571,
>> + 36904, 37500, 38093, 38571, 39047, 39453, 40000, 40476,
>> + 40952, 41494, 41964, 42857, 43535, 44047, 44444, 45000,
>> + 45535, 46029, 46428, 46823, 47617, 48214, 48571, 49107,
>> + 49523, 50000, 50476, 50892, 51428, 52380, 53333, 53967,
>> + 54285, 55238, 55555, 55952, 57142, 58095, 58571, 59047,
>> + 59521, 60000, 60316, 60952, 61428, 61904, 62500, 63092,
>> + 63491, 64282, 65078, 65476, 66071, 66664, 67142, 67854,
>> + 68571, 69044, 69642, 70000, 71425, 72616, 73214, 73808,
>> + 74285, 75000, 75714, 76187, 76785, 77142, 78570, 80000,
>> + 80357, 80951, 81428, 82142, 82857, 83332, 83928, 84285,
>> + 85713, 87142, 87500, 88094, 88571, 89285, 90000, 90475,
>> + 91071, 91428, 92856, 94642,
>> +};
>> +
>> +
>> +static size_t freq_srch(u32 key, const u32 *array, size_t size)
>> +{
>> + int l = 0;
>> + int r = size - 1;
>> + int m;
>> +
>> + while (l <= r) {
>> + m = (l + r) / 2;
>> + if (array[m] < key)
>> + l = m + 1;
>> + else if (array[m] > key)
>> + r = m - 1;
>> + else
>> + return m;
>> + }
>> +
>> + if (r < 0 || l > size - 1)
>> + return m;
>> + else
>> + return (abs(key - array[l]) < abs(key - array[r])) ? l : r;
>> +}
>> +
>> +
>> +u32 mgb4_cmt_set_vout(struct mgb4_vout_dev *voutdev, unsigned int freq)
>> +{
>> + const uint16_t *reg_set;
>> + const uint32_t *addr;
>> + u32 config;
>> + size_t i, index;
>> +
>> + index = freq_srch(freq, cmt_freq, ARRAY_SIZE(cmt_freq));
>> + addr = cmt_addrs_out[voutdev->config->id];
>> + reg_set = cmt_vals_out[index];
>> +
>> + config = mgb4_read_reg(&voutdev->mgbdev->video, voutdev->config->regs.config);
>> +
>> + mgb4_write_reg(&voutdev->mgbdev->video, voutdev->config->regs.config,
>> + 0x1 | (config & ~0x3));
>> +
>> + for (i = 0; i < ARRAY_SIZE(cmt_addrs_out[0]); i++)
>> + mgb4_write_reg(&voutdev->mgbdev->cmt, addr[i], reg_set[i]);
>> +
>> + mgb4_mask_reg(&voutdev->mgbdev->video, voutdev->config->regs.config,
>> + 0x100, 0x100);
>> + mgb4_mask_reg(&voutdev->mgbdev->video, voutdev->config->regs.config,
>> + 0x100, 0x0);
>> +
>> + mgb4_write_reg(&voutdev->mgbdev->video, voutdev->config->regs.config,
>> + config & ~0x1);
>> +
>> + return cmt_freq[index];
>> +}
>
> I'm pretty certain that you didn't run 'checkpatch.pl --strict' over this patch.
> Please do so for v4!
>
I have run 'checkpatch.pl' without '--strict' over this patch and
ignored all the "too long lines" warnings on the tables as I think they
are more clear this way, and all the "change name suggestion" warnings
as they are IMHO wrong in this case. Other warnings did not come up. I
will try it with '--strict' when I post v4 patch.
>> +
>> +void mgb4_cmt_set_vin(struct mgb4_vin_dev *vindev, unsigned int freq_range)
>> +{
>> + const uint16_t *reg_set;
>> + const uint32_t *addr;
>> + u32 config;
>> + size_t i;
>> +
>> + addr = cmt_addrs_in[vindev->config->id];
>> + reg_set = cmt_vals_in[freq_range];
>> +
>> + config = mgb4_read_reg(&vindev->mgbdev->video, vindev->config->regs.config);
>> +
>> + mgb4_write_reg(&vindev->mgbdev->video, vindev->config->regs.config,
>> + 0x1 | (config & ~0x3));
>> +
>> + for (i = 0; i < ARRAY_SIZE(cmt_addrs_in[0]); i++)
>> + mgb4_write_reg(&vindev->mgbdev->cmt, addr[i], reg_set[i]);
>> +
>> + mgb4_mask_reg(&vindev->mgbdev->video, vindev->config->regs.config,
>> + 0x1000, 0x1000);
>> + mgb4_mask_reg(&vindev->mgbdev->video, vindev->config->regs.config,
>> + 0x1000, 0x0);
>> +
>> + mgb4_write_reg(&vindev->mgbdev->video, vindev->config->regs.config,
>> + config & ~0x1);
>> +}
>> diff --git a/drivers/media/pci/mgb4/mgb4_cmt.h b/drivers/media/pci/mgb4/mgb4_cmt.h
>> new file mode 100644
>> index 000000000000..353966654c95
>> --- /dev/null
>> +++ b/drivers/media/pci/mgb4/mgb4_cmt.h
>> @@ -0,0 +1,16 @@
>> +/* SPDX-License-Identifier: GPL-2.0-only */
>> +/*
>> + * Copyright (C) 2021-2022 Digiteq Automotive
>> + * author: Martin Tuma <martin.tuma@...iteqautomotive.com>
>> + */
>> +
>> +#ifndef __MGB4_CMT_H__
>> +#define __MGB4_CMT_H__
>> +
>> +#include "mgb4_vout.h"
>> +#include "mgb4_vin.h"
>> +
>> +u32 mgb4_cmt_set_vout(struct mgb4_vout_dev *voutdev, unsigned int freq);
>> +void mgb4_cmt_set_vin(struct mgb4_vin_dev *vindev, unsigned int freq_range);
>> +
>> +#endif
>> diff --git a/drivers/media/pci/mgb4/mgb4_core.c b/drivers/media/pci/mgb4/mgb4_core.c
>> new file mode 100644
>> index 000000000000..8aa548c79f5f
>> --- /dev/null
>> +++ b/drivers/media/pci/mgb4/mgb4_core.c
>> @@ -0,0 +1,628 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * This is the driver for the MGB4 video grabber card by Digiteq Automotive.
>> + *
>> + * Copyright (C) 2021-2022 Digiteq Automotive
>> + * author: Martin Tuma <martin.tuma@...iteqautomotive.com>
>> + */
>> +
>> +#include <linux/types.h>
>> +#include <linux/version.h>
>> +#include <linux/module.h>
>> +#include <linux/pci.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/clk.h>
>> +#include <linux/clk-provider.h>
>> +#include <linux/clkdev.h>
>> +#include <linux/i2c.h>
>> +#include <linux/delay.h>
>> +#include <linux/dma/amd_xdma.h>
>> +#include <linux/platform_data/amd_xdma.h>
>> +#include <linux/spi/xilinx_spi.h>
>> +#include <linux/mtd/mtd.h>
>> +#include "mgb4_dma.h"
>> +#include "mgb4_i2c.h"
>> +#include "mgb4_sysfs.h"
>> +#include "mgb4_vout.h"
>> +#include "mgb4_vin.h"
>> +#include "mgb4_trigger.h"
>> +#include "mgb4_core.h"
>> +
>> +
>> +#define MGB4_USER_IRQS 16
>> +
>> +static int flashid;
>> +
>> +static struct xdma_chan_info h2c_chan_info = {
>> + .dir = DMA_MEM_TO_DEV,
>> +};
>> +
>> +static struct xdma_chan_info c2h_chan_info = {
>> + .dir = DMA_DEV_TO_MEM,
>> +};
>> +
>> +static struct xspi_platform_data spi_platform_data = {
>> + .num_chipselect = 1,
>> + .bits_per_word = 8
>> +};
>> +
>> +static const struct i2c_board_info extender_info = {
>> + I2C_BOARD_INFO("extender", 0x21)
>> +};
>> +
>> +static int match_i2c_adap(struct device *dev, void *data)
>> +{
>> + return (i2c_verify_adapter(dev) != NULL);
>> +}
>> +
>> +static struct i2c_adapter *get_i2c_adap(struct platform_device *pdev)
>> +{
>> + struct device *dev;
>> + int i;
>> +
>> + for (i = 0; i < 10; i++) {
>> + msleep(100);
>> + mutex_lock(&pdev->dev.mutex);
>> + dev = device_find_child(&pdev->dev, NULL, match_i2c_adap);
>> + mutex_unlock(&pdev->dev.mutex);
>> + if (dev)
>> + return to_i2c_adapter(dev);
>> + }
>> +
>> + return NULL;
>> +}
>> +
>> +static int match_spi_adap(struct device *dev, void *data)
>> +{
>> + return (to_spi_device(dev) != NULL);
>> +}
>> +
>> +static struct spi_master *get_spi_adap(struct platform_device *pdev)
>> +{
>> + struct device *dev;
>> + int i;
>> +
>> + for (i = 0; i < 10; i++) {
>> + msleep(100);
>> + mutex_lock(&pdev->dev.mutex);
>> + dev = device_find_child(&pdev->dev, NULL, match_spi_adap);
>> + mutex_unlock(&pdev->dev.mutex);
>> + if (dev)
>> + return container_of(dev, struct spi_master, dev);
>> + }
>> +
>> + return NULL;
>> +}
>> +
>> +static int init_spi(struct mgb4_dev *mgbdev)
>> +{
>> + struct resource spi_resources[] = {
>> + {
>> + .start = 0x400,
>> + .end = 0x47f,
>> + .flags = IORESOURCE_MEM,
>> + .name = "io-memory",
>> + },
>> + {
>> + .start = 14,
>> + .end = 14,
>> + .flags = IORESOURCE_IRQ,
>> + .name = "irq",
>> + },
>> + };
>> + struct spi_board_info spi_info = {
>> + .max_speed_hz = 10000000,
>> + .modalias = "m25p80",
>> + .chip_select = 0,
>> + .mode = SPI_MODE_3,
>> + };
>> + struct pci_dev *pdev = mgbdev->pdev;
>> + struct device *dev = &pdev->dev;
>> + struct spi_master *master;
>> + struct spi_device *spi_dev;
>> + u32 irq;
>> + int rv, id;
>> + resource_size_t mapbase = pci_resource_start(pdev, MGB4_MGB4_BAR_ID);
>> +
>> + irq = xdma_get_user_irq(mgbdev->xdev, 14);
>> + xdma_enable_user_irq(mgbdev->xdev, irq);
>> +
>> + spi_resources[0].parent = &pdev->resource[MGB4_MGB4_BAR_ID];
>> + spi_resources[0].start += mapbase;
>> + spi_resources[0].end += mapbase;
>> + spi_resources[1].start = irq;
>> + spi_resources[1].end = irq;
>> +
>> + id = pci_dev_id(pdev);
>> + mgbdev->spi_pdev = platform_device_register_resndata(dev, "xilinx_spi",
>> + id, spi_resources, ARRAY_SIZE(spi_resources), &spi_platform_data,
>> + sizeof(spi_platform_data));
>> + if (IS_ERR(mgbdev->spi_pdev)) {
>> + dev_err(dev, "failed to register SPI device\n");
>> + return PTR_ERR(mgbdev->spi_pdev);
>> + }
>> +
>> + master = get_spi_adap(mgbdev->spi_pdev);
>> + if (!master) {
>> + dev_err(dev, "failed to get SPI adapter\n");
>> + rv = -EINVAL;
>> + goto err_pdev;
>> + }
>> +
>> + snprintf(mgbdev->fw_part_name, sizeof(mgbdev->fw_part_name), "mgb4-fw.%d",
>> + flashid);
>> + mgbdev->partitions[0].name = mgbdev->fw_part_name;
>> + mgbdev->partitions[0].size = 0x400000;
>> + mgbdev->partitions[0].offset = 0x400000;
>> + mgbdev->partitions[0].mask_flags = 0;
>> +
>> + snprintf(mgbdev->data_part_name, sizeof(mgbdev->data_part_name),
>> + "mgb4-data.%d", flashid);
>> + mgbdev->partitions[1].name = mgbdev->data_part_name;
>> + mgbdev->partitions[1].size = 0x10000;
>> + mgbdev->partitions[1].offset = 0xFF0000;
>> + mgbdev->partitions[1].mask_flags = MTD_CAP_NORFLASH;
>> +
>> + snprintf(mgbdev->flash_name, sizeof(mgbdev->flash_name), "mgb4-flash.%d",
>> + flashid);
>> + mgbdev->flash_data.name = mgbdev->flash_name;
>> + mgbdev->flash_data.parts = mgbdev->partitions;
>> + mgbdev->flash_data.nr_parts = ARRAY_SIZE(mgbdev->partitions);
>> + mgbdev->flash_data.type = "spi-nor";
>> +
>> + spi_info.platform_data = &(mgbdev->flash_data);
>> +
>> + spi_dev = spi_new_device(master, &spi_info);
>> + put_device(&master->dev);
>> + if (!spi_dev) {
>> + dev_err(dev, "failed to create MTD device\n");
>> + rv = -EINVAL;
>> + goto err_pdev;
>> + }
>> +
>> + return 0;
>> +
>> +err_pdev:
>> + platform_device_unregister(mgbdev->spi_pdev);
>> +
>> + return rv;
>> +}
>> +
>> +static void free_spi(struct mgb4_dev *mgbdev)
>> +{
>> + platform_device_unregister(mgbdev->spi_pdev);
>> +}
>> +
>> +static int init_i2c(struct mgb4_dev *mgbdev)
>> +{
>> + struct resource i2c_resources[] = {
>> + {
>> + .start = 0x200,
>> + .end = 0x3ff,
>> + .flags = IORESOURCE_MEM,
>> + .name = "io-memory",
>> + },
>> + {
>> + .start = 15,
>> + .end = 15,
>> + .flags = IORESOURCE_IRQ,
>> + .name = "irq",
>> + },
>> + };
>> + struct pci_dev *pdev = mgbdev->pdev;
>> + struct device *dev = &pdev->dev;
>> + char clk_name[16];
>> + u32 irq;
>> + int rv, id;
>> + resource_size_t mapbase = pci_resource_start(pdev, MGB4_MGB4_BAR_ID);
>> +
>> + irq = xdma_get_user_irq(mgbdev->xdev, 15);
>> + xdma_enable_user_irq(mgbdev->xdev, irq);
>> +
>> + i2c_resources[0].parent = &pdev->resource[MGB4_MGB4_BAR_ID];
>> + i2c_resources[0].start += mapbase;
>> + i2c_resources[0].end += mapbase;
>> + i2c_resources[1].start = irq;
>> + i2c_resources[1].end = irq;
>> +
>> + id = pci_dev_id(pdev);
>> +
>> + // create dummy clock required by the xiic-i2c adapter
>> + snprintf(clk_name, sizeof(clk_name), "xiic-i2c.%d", id);
>> + mgbdev->i2c_clk = clk_hw_register_fixed_rate(NULL, clk_name, NULL, 0, 125000000);
>> + if (IS_ERR(mgbdev->i2c_clk)) {
>> + dev_err(dev, "failed to register I2C clock\n");
>> + return PTR_ERR(mgbdev->i2c_clk);
>> + }
>> + mgbdev->i2c_cl = clkdev_hw_create(mgbdev->i2c_clk, NULL, "xiic-i2c.%d", id);
>> + if (!mgbdev->i2c_cl) {
>> + dev_err(dev, "failed to register I2C clockdev\n");
>> + rv = -ENOMEM;
>> + goto err_clk;
>> + }
>> +
>> + mgbdev->i2c_pdev = platform_device_register_resndata(dev, "xiic-i2c",
>> + id, i2c_resources, ARRAY_SIZE(i2c_resources), NULL, 0);
>> + if (IS_ERR(mgbdev->i2c_pdev)) {
>> + dev_err(dev, "failed to register I2C device\n");
>> + rv = PTR_ERR(mgbdev->i2c_pdev);
>> + goto err_clkdev;
>> + }
>> +
>> + mgbdev->i2c_adap = get_i2c_adap(mgbdev->i2c_pdev);
>> + if (!mgbdev->i2c_adap) {
>> + dev_err(dev, "failed to get I2C adapter\n");
>> + rv = -EINVAL;
>> + goto err_pdev;
>> + }
>> +
>> + mutex_init(&mgbdev->i2c_lock);
>> +
>> + return 0;
>> +
>> +err_pdev:
>> + platform_device_unregister(mgbdev->i2c_pdev);
>> +err_clkdev:
>> + clkdev_drop(mgbdev->i2c_cl);
>> +err_clk:
>> + clk_hw_unregister(mgbdev->i2c_clk);
>> +
>> + return rv;
>> +}
>> +
>> +static void free_i2c(struct mgb4_dev *mgbdev)
>> +{
>> + put_device(&mgbdev->i2c_adap->dev);
>> + platform_device_unregister(mgbdev->i2c_pdev);
>> + clkdev_drop(mgbdev->i2c_cl);
>> + clk_hw_unregister(mgbdev->i2c_clk);
>> +}
>> +
>> +static int init_sysfs(struct pci_dev *pdev)
>> +{
>> + struct device_attribute **attr, **eattr;
>> + int rv;
>> +
>> + for (attr = mgb4_pci_attrs; *attr; attr++) {
>> + rv = device_create_file(&pdev->dev, *attr);
>> + if (rv < 0)
>> + goto err_file;
>> + }
>> +
>> + return 0;
>> +
>> +err_file:
>> + for (eattr = mgb4_pci_attrs; eattr != attr; eattr++)
>> + device_remove_file(&pdev->dev, *eattr);
>> +
>> + return rv;
>> +}
>> +
>> +static void free_sysfs(struct pci_dev *pdev)
>> +{
>> + struct device_attribute **attr;
>> +
>> + for (attr = mgb4_pci_attrs; *attr; attr++)
>> + device_remove_file(&pdev->dev, *attr);
>> +}
>> +
>> +static int get_serial_number(struct mgb4_dev *mgbdev)
>> +{
>> + struct device *dev = &mgbdev->pdev->dev;
>> + struct mtd_info *mtd;
>> + size_t rs;
>> + int rv;
>> +
>> + mgbdev->serial_number = 0;
>> +
>> + mtd = get_mtd_device_nm(mgbdev->data_part_name);
>> + if (IS_ERR(mtd)) {
>> + dev_warn(dev, "failed to get data MTD device\n");
>> + return -ENOENT;
>> + }
>> + rv = mtd_read(mtd, 0, sizeof(mgbdev->serial_number), &rs,
>> + (u_char *)&mgbdev->serial_number);
>> + put_mtd_device(mtd);
>> + if (rv < 0 || rs != sizeof(mgbdev->serial_number)) {
>> + dev_warn(dev, "error reading MTD device\n");
>> + return -EIO;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static int get_module_version(struct mgb4_dev *mgbdev)
>> +{
>> + struct device *dev = &mgbdev->pdev->dev;
>> + struct mgb4_i2c_client extender;
>> + s32 version;
>> + u32 fw_version;
>> + int rv;
>> +
>> + rv = mgb4_i2c_init(&extender, mgbdev->i2c_adap, &extender_info, 8);
>> + if (rv < 0) {
>> + dev_err(dev, "failed to create extender I2C device\n");
>> + return rv;
>> + }
>> + version = mgb4_i2c_read_byte(&extender, 0x00);
>> + mgb4_i2c_free(&extender);
>> + if (version < 0) {
>> + dev_err(dev, "error reading module version\n");
>> + return -EIO;
>> + }
>> +
>> + mgbdev->module_version = ~((u32)version) & 0xff;
>> + if (!(MGB4_IS_FPDL3(mgbdev) || MGB4_IS_GMSL(mgbdev))) {
>> + dev_err(dev, "unknown module type\n");
>> + return -EINVAL;
>> + }
>> + fw_version = mgb4_read_reg(&mgbdev->video, 0xC4);
>> + if (fw_version >> 24 != mgbdev->module_version >> 4) {
>> + dev_err(dev, "module/firmware type mismatch\n");
>> + return -EINVAL;
>> + }
>> +
>> + dev_info(dev, "%s module detected\n",
>> + MGB4_IS_FPDL3(mgbdev) ? "FPDL3" : "GMSL");
>> +
>> + return 0;
>> +}
>> +
>> +static int map_regs(struct pci_dev *pdev, struct resource *res,
>> + struct mgb4_regs *regs)
>> +{
>> + int rv;
>> + resource_size_t mapbase = pci_resource_start(pdev, MGB4_MGB4_BAR_ID);
>> +
>> + res->start += mapbase;
>> + res->end += mapbase;
>> +
>> + rv = mgb4_regs_map(res, regs);
>> + if (rv < 0) {
>> + dev_err(&pdev->dev, "failed to map %s registers\n", res->name);
>> + return rv;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static int init_xdma(struct mgb4_dev *mgbdev)
>> +{
>> + struct xdma_platdata data;
>> + struct resource res[2] = { 0 };
>> + struct dma_slave_map *map;
>> + struct pci_dev *pdev = mgbdev->pdev;
>> + struct device *dev = &pdev->dev;
>> + int i;
>> +
>> + res[0].start = pci_resource_start(pdev, MGB4_XDMA_BAR_ID);
>> + res[0].end = pci_resource_end(pdev, MGB4_XDMA_BAR_ID);
>> + res[0].flags = IORESOURCE_MEM;
>> + res[0].parent = &pdev->resource[MGB4_XDMA_BAR_ID];
>> + res[1].start = pci_irq_vector(pdev, 0);
>> + res[1].end = res[1].start + MGB4_VIN_DEVICES + MGB4_VOUT_DEVICES
>> + + MGB4_USER_IRQS - 1;
>> + res[1].flags = IORESOURCE_IRQ;
>> +
>> + data.max_dma_channels = MGB4_VIN_DEVICES + MGB4_VOUT_DEVICES;
>> + data.device_map = mgbdev->slave_map;
>> + data.device_map_cnt = MGB4_VIN_DEVICES + MGB4_VOUT_DEVICES;
>> +
>> + for (i = 0; i < MGB4_VIN_DEVICES; i++) {
>> + sprintf(mgbdev->channel_names[i], "c2h%d", i);
>> + map = &data.device_map[i];
>> + map->slave = mgbdev->channel_names[i];
>> + map->devname = dev_name(dev);
>> + map->param = XDMA_FILTER_PARAM(&c2h_chan_info);
>> + }
>> + for (i = 0; i < MGB4_VOUT_DEVICES; i++) {
>> + sprintf(mgbdev->channel_names[i + MGB4_VIN_DEVICES], "h2c%d", i);
>> + map = &data.device_map[i + MGB4_VIN_DEVICES];
>> + map->slave = mgbdev->channel_names[i + MGB4_VIN_DEVICES];
>> + map->devname = dev_name(dev);
>> + map->param = XDMA_FILTER_PARAM(&h2c_chan_info);
>> + }
>> +
>> + mgbdev->xdev = platform_device_register_resndata(
>> + dev, "xdma", PLATFORM_DEVID_AUTO, res, 2, &data, sizeof(data));
>> + if (IS_ERR(mgbdev->xdev)) {
>> + dev_err(dev, "failed to register XDMA device\n");
>> + return PTR_ERR(mgbdev->xdev);
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static void free_xdma(struct mgb4_dev *mgbdev)
>> +{
>> + platform_device_unregister(mgbdev->xdev);
>> +}
>> +
>> +static int mgb4_probe(struct pci_dev *pdev, const struct pci_device_id *id)
>> +{
>> + int i, rv;
>> + struct mgb4_dev *mgbdev;
>> + struct resource video = {
>> + .start = 0x0,
>> + .end = 0x100,
>> + .flags = IORESOURCE_MEM,
>> + .name = "mgb4-video",
>> + };
>> + struct resource cmt = {
>> + .start = 0x1000,
>> + .end = 0x1800,
>> + .flags = IORESOURCE_MEM,
>> + .name = "mgb4-cmt",
>> + };
>> + int irqs = pci_msix_vec_count(pdev);
>> +
>> +
>> + mgbdev = kzalloc(sizeof(*mgbdev), GFP_KERNEL);
>> + if (!mgbdev)
>> + return -ENOMEM;
>> +
>> + mgbdev->pdev = pdev;
>> + pci_set_drvdata(pdev, mgbdev);
>> +
>> + /* PCIe related stuff */
>> + rv = pci_enable_device(pdev);
>> + if (rv) {
>> + dev_err(&pdev->dev, "error enabling PCI device\n");
>> + goto err_mgbdev;
>> + }
>> +
>> + rv = pcie_capability_set_word(pdev, PCI_EXP_DEVCTL, PCI_EXP_DEVCTL_RELAX_EN);
>> + if (rv)
>> + dev_warn(&pdev->dev, "error enabling PCIe relaxed ordering\n");
>> + rv = pcie_capability_set_word(pdev, PCI_EXP_DEVCTL, PCI_EXP_DEVCTL_EXT_TAG);
>> + if (rv)
>> + dev_warn(&pdev->dev, "error enabling PCIe extended tag field\n");
>> + rv = pcie_set_readrq(pdev, 512);
>> + if (rv)
>> + dev_warn(&pdev->dev, "error setting PCIe max. memory read size\n");
>> + pci_set_master(pdev);
>> +
>> + rv = pci_alloc_irq_vectors(pdev, irqs, irqs, PCI_IRQ_MSIX);
>> + if (rv < 0) {
>> + dev_err(&pdev->dev, "error allocating MSI-X IRQs\n");
>> + goto err_enable_pci;
>> + }
>> +
>> + rv = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
>> + if (rv) {
>> + dev_err(&pdev->dev, "error setting DMA mask\n");
>> + goto err_enable_pci;
>> + }
>> +
>> + /* DMA + IRQ engine */
>> + rv = init_xdma(mgbdev);
>> + if (rv)
>> + goto err_alloc_irq;
>> + rv = mgb4_dma_channel_init(mgbdev);
>> + if (rv)
>> + goto err_dma_chan;
>> +
>> + /* mgb4 video registers */
>> + rv = map_regs(pdev, &video, &mgbdev->video);
>> + if (rv < 0)
>> + goto err_dma_chan;
>> + /* mgb4 cmt registers */
>> + rv = map_regs(pdev, &cmt, &mgbdev->cmt);
>> + if (rv < 0)
>> + goto err_video_regs;
>> +
>> + /* SPI FLASH */
>> + rv = init_spi(mgbdev);
>> + if (rv < 0)
>> + goto err_cmt_regs;
>> +
>> + /* I2C controller */
>> + rv = init_i2c(mgbdev);
>> + if (rv < 0)
>> + goto err_spi;
>> +
>> + /* PCI card related sysfs attributes */
>> + rv = init_sysfs(pdev);
>> + if (rv < 0)
>> + goto err_i2c;
>> +
>> + /* Get card serial number. On systems without MTD flash support we may
>> + * get an error thus ignore the return value. An invalid serial number
>> + * should not break anything...
>> + */
>> + if (get_serial_number(mgbdev) < 0)
>> + dev_warn(&pdev->dev, "error reading card serial number\n");
>> +
>> + /* Get module type. If no valid module is found, skip the video device
>> + * creation part but do not exit with error to allow flashing the card.
>> + */
>> + rv = get_module_version(mgbdev);
>> + if (rv < 0)
>> + goto exit;
>> +
>> + /* Video input v4l2 devices */
>> + for (i = 0; i < MGB4_VIN_DEVICES; i++)
>> + mgbdev->vin[i] = mgb4_vin_create(mgbdev, i);
>> +
>> + /* Video output v4l2 devices */
>> + for (i = 0; i < MGB4_VOUT_DEVICES; i++)
>> + mgbdev->vout[i] = mgb4_vout_create(mgbdev, i);
>> +
>> + /* Triggers */
>> + mgbdev->indio_dev = mgb4_trigger_create(mgbdev);
>> +
>> +exit:
>> + flashid++;
>> +
>> + return 0;
>> +
>> +err_i2c:
>> + free_i2c(mgbdev);
>> +err_spi:
>> + free_spi(mgbdev);
>> +err_cmt_regs:
>> + mgb4_regs_free(&mgbdev->cmt);
>> +err_video_regs:
>> + mgb4_regs_free(&mgbdev->video);
>> +err_dma_chan:
>> + mgb4_dma_channel_free(mgbdev);
>> + free_xdma(mgbdev);
>> +err_alloc_irq:
>> + pci_disable_msix(pdev);
>> +err_enable_pci:
>> + pci_disable_device(pdev);
>> +err_mgbdev:
>> + kfree(mgbdev);
>> +
>> + return rv;
>> +}
>> +
>> +static void mgb4_remove(struct pci_dev *pdev)
>> +{
>> + struct mgb4_dev *mgbdev = pci_get_drvdata(pdev);
>> + int i;
>> +
>> + if (mgbdev->indio_dev)
>> + mgb4_trigger_free(mgbdev->indio_dev);
>> +
>> + for (i = 0; i < MGB4_VOUT_DEVICES; i++)
>> + if (mgbdev->vout[i])
>> + mgb4_vout_free(mgbdev->vout[i]);
>> + for (i = 0; i < MGB4_VIN_DEVICES; i++)
>> + if (mgbdev->vin[i])
>> + mgb4_vin_free(mgbdev->vin[i]);
>> +
>> + free_sysfs(mgbdev->pdev);
>> + free_spi(mgbdev);
>> + free_i2c(mgbdev);
>> + mgb4_regs_free(&mgbdev->video);
>> + mgb4_regs_free(&mgbdev->cmt);
>> +
>> + mgb4_dma_channel_free(mgbdev);
>> + free_xdma(mgbdev);
>> +
>> + pci_disable_msix(mgbdev->pdev);
>> + pci_disable_device(mgbdev->pdev);
>> +
>> + kfree(mgbdev);
>> +}
>> +
>> +static const struct pci_device_id mgb4_pci_ids[] = {
>> + { PCI_DEVICE(0x1ed8, 0x0101), },
>> + { 0, }
>> +};
>> +MODULE_DEVICE_TABLE(pci, mgb4_pci_ids);
>> +
>> +static struct pci_driver mgb4_pci_driver = {
>> + .name = KBUILD_MODNAME,
>> + .id_table = mgb4_pci_ids,
>> + .probe = mgb4_probe,
>> + .remove = mgb4_remove,
>> +};
>> +
>> +module_pci_driver(mgb4_pci_driver);
>> +
>> +MODULE_AUTHOR("Digiteq Automotive s.r.o.");
>> +MODULE_DESCRIPTION("Digiteq Automotive MGB4 Driver");
>> +MODULE_LICENSE("GPL");
>> +MODULE_SOFTDEP("pre: platform:xiic-i2c platform:xilinx_spi spi-nor");
>> diff --git a/drivers/media/pci/mgb4/mgb4_core.h b/drivers/media/pci/mgb4/mgb4_core.h
>> new file mode 100644
>> index 000000000000..9bd881c7e29d
>> --- /dev/null
>> +++ b/drivers/media/pci/mgb4/mgb4_core.h
>> @@ -0,0 +1,65 @@
>> +/* SPDX-License-Identifier: GPL-2.0-only */
>> +/*
>> + * Copyright (C) 2021-2022 Digiteq Automotive
>> + * author: Martin Tuma <martin.tuma@...iteqautomotive.com>
>> + */
>> +
>> +#ifndef __MGB4_CORE_H__
>> +#define __MGB4_CORE_H__
>> +
>> +#include <linux/spi/flash.h>
>> +#include <linux/mtd/partitions.h>
>> +#include <linux/mutex.h>
>> +#include <linux/dmaengine.h>
>> +#include "mgb4_regs.h"
>> +
>> +#define MGB4_VIN_DEVICES 2
>> +#define MGB4_VOUT_DEVICES 2
>> +
>> +#define MGB4_MGB4_BAR_ID 0
>> +#define MGB4_XDMA_BAR_ID 1
>> +
>> +#define MGB4_IS_GMSL(mgbdev) \
>> + ((mgbdev)->module_version >> 4 == 2)
>> +#define MGB4_IS_FPDL3(mgbdev) \
>> + ((mgbdev)->module_version >> 4 == 1)
>> +
>> +struct mgb4_dma_channel {
>> + struct dma_chan *chan;
>> + struct completion req_compl;
>> +};
>> +
>> +struct mgb4_dev {
>> + struct pci_dev *pdev;
>> + struct platform_device *xdev;
>> + struct mgb4_vin_dev *vin[MGB4_VIN_DEVICES];
>> + struct mgb4_vout_dev *vout[MGB4_VOUT_DEVICES];
>> +
>> + struct mgb4_dma_channel c2h_chan[MGB4_VIN_DEVICES];
>> + struct mgb4_dma_channel h2c_chan[MGB4_VOUT_DEVICES];
>> + struct dma_slave_map slave_map[MGB4_VIN_DEVICES + MGB4_VOUT_DEVICES];
>> +
>> + struct mgb4_regs video;
>> + struct mgb4_regs cmt;
>> +
>> + struct clk_hw *i2c_clk;
>> + struct clk_lookup *i2c_cl;
>> + struct platform_device *i2c_pdev;
>> + struct i2c_adapter *i2c_adap;
>> + struct mutex i2c_lock;
>> +
>> + struct platform_device *spi_pdev;
>> + struct flash_platform_data flash_data;
>> + struct mtd_partition partitions[2];
>> + char flash_name[16];
>> + char fw_part_name[16];
>> + char data_part_name[16];
>> + char channel_names[MGB4_VIN_DEVICES + MGB4_VOUT_DEVICES][16];
>> +
>> + struct iio_dev *indio_dev;
>> +
>> + u8 module_version;
>> + u32 serial_number;
>> +};
>> +
>> +#endif
>> diff --git a/drivers/media/pci/mgb4/mgb4_dma.c b/drivers/media/pci/mgb4/mgb4_dma.c
>> new file mode 100644
>> index 000000000000..b8ca7587747e
>> --- /dev/null
>> +++ b/drivers/media/pci/mgb4/mgb4_dma.c
>> @@ -0,0 +1,120 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (C) 2021-2022 Digiteq Automotive
>> + * author: Martin Tuma <martin.tuma@...iteqautomotive.com>
>> + */
>> +
>> +#include <linux/pci.h>
>> +#include <linux/dma-direction.h>
>> +#include "mgb4_core.h"
>> +#include "mgb4_dma.h"
>> +
>> +static void chan_irq(void *param)
>> +{
>> + struct mgb4_dma_channel *chan = param;
>> +
>> + complete(&chan->req_compl);
>> +}
>> +
>> +int mgb4_dma_transfer(struct mgb4_dev *mgbdev, u32 channel, bool write,
>> + u64 paddr, struct sg_table *sgt)
>> +{
>> + struct dma_slave_config cfg;
>> + struct mgb4_dma_channel *chan;
>> + struct dma_async_tx_descriptor *tx;
>> + struct pci_dev *pdev = mgbdev->pdev;
>> + int ret;
>> +
>> + memset(&cfg, 0, sizeof(cfg));
>> +
>> + if (write) {
>> + cfg.direction = DMA_MEM_TO_DEV;
>> + cfg.dst_addr = paddr;
>> + cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
>> + chan = &mgbdev->h2c_chan[channel];
>> + } else {
>> + cfg.direction = DMA_DEV_TO_MEM;
>> + cfg.src_addr = paddr;
>> + cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
>> + chan = &mgbdev->c2h_chan[channel];
>> + }
>> +
>> + ret = dmaengine_slave_config(chan->chan, &cfg);
>> + if (ret) {
>> + dev_err(&pdev->dev, "failed to config dma: %d\n", ret);
>> + return ret;
>> + }
>> +
>> + tx = dmaengine_prep_slave_sg(chan->chan, sgt->sgl, sgt->nents,
>> + cfg.direction, 0);
>> + if (!tx) {
>> + dev_err(&pdev->dev, "failed to prep slave sg\n");
>> + return -EIO;
>> + }
>> +
>> + tx->callback = chan_irq;
>> + tx->callback_param = chan;
>> +
>> + ret = dma_submit_error(dmaengine_submit(tx));
>> + if (ret) {
>> + dev_err(&pdev->dev, "failed to submit sg\n");
>> + return -EIO;
>> + }
>> +
>> + dma_async_issue_pending(chan->chan);
>> +
>> + if (!wait_for_completion_timeout(&chan->req_compl,
>> + msecs_to_jiffies(10000))) {
>> + dev_err(&pdev->dev, "dma timeout\n");
>> + dmaengine_terminate_sync(chan->chan);
>> + return -EIO;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +int mgb4_dma_channel_init(struct mgb4_dev *mgbdev)
>> +{
>> + int i, ret;
>> + char name[16];
>> + struct pci_dev *pdev = mgbdev->pdev;
>> +
>> + for (i = 0; i < MGB4_VIN_DEVICES; i++) {
>> + sprintf(name, "c2h%d", i);
>> + mgbdev->c2h_chan[i].chan = dma_request_chan(&pdev->dev, name);
>> + if (IS_ERR(mgbdev->c2h_chan[i].chan)) {
>> + dev_err(&pdev->dev, "failed to initialize %s", name);
>> + ret = PTR_ERR(mgbdev->c2h_chan[i].chan);
>> + mgbdev->c2h_chan[i].chan = NULL;
>> + return ret;
>> + }
>> + init_completion(&mgbdev->c2h_chan[i].req_compl);
>> + }
>> + for (i = 0; i < MGB4_VOUT_DEVICES; i++) {
>> + sprintf(name, "h2c%d", i);
>> + mgbdev->h2c_chan[i].chan = dma_request_chan(&pdev->dev, name);
>> + if (IS_ERR(mgbdev->h2c_chan[i].chan)) {
>> + dev_err(&pdev->dev, "failed to initialize %s", name);
>> + ret = PTR_ERR(mgbdev->h2c_chan[i].chan);
>> + mgbdev->h2c_chan[i].chan = NULL;
>> + return ret;
>> + }
>> + init_completion(&mgbdev->h2c_chan[i].req_compl);
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +void mgb4_dma_channel_free(struct mgb4_dev *mgbdev)
>> +{
>> + int i;
>> +
>> + for (i = 0; i < MGB4_VIN_DEVICES; i++) {
>> + if (mgbdev->c2h_chan[i].chan)
>> + dma_release_channel(mgbdev->c2h_chan[i].chan);
>> + }
>> + for (i = 0; i < MGB4_VOUT_DEVICES; i++) {
>> + if (mgbdev->h2c_chan[i].chan)
>> + dma_release_channel(mgbdev->h2c_chan[i].chan);
>> + }
>> +}
>> diff --git a/drivers/media/pci/mgb4/mgb4_dma.h b/drivers/media/pci/mgb4/mgb4_dma.h
>> new file mode 100644
>> index 000000000000..443e2a11b055
>> --- /dev/null
>> +++ b/drivers/media/pci/mgb4/mgb4_dma.h
>> @@ -0,0 +1,18 @@
>> +/* SPDX-License-Identifier: GPL-2.0-only */
>> +/*
>> + * Copyright (C) 2021-2022 Digiteq Automotive
>> + * author: Martin Tuma <martin.tuma@...iteqautomotive.com>
>> + */
>> +
>> +#ifndef __MGB4_DMA_H__
>> +#define __MGB4_DMA_H__
>> +
>> +#include "mgb4_core.h"
>> +
>> +extern int mgb4_dma_channel_init(struct mgb4_dev *mgbdev);
>> +extern void mgb4_dma_channel_free(struct mgb4_dev *mgbdev);
>> +
>> +extern int mgb4_dma_transfer(struct mgb4_dev *mgbdev, u32 channel, bool write,
>> + u64 paddr, struct sg_table *sgt);
>> +
>> +#endif
>> diff --git a/drivers/media/pci/mgb4/mgb4_i2c.c b/drivers/media/pci/mgb4/mgb4_i2c.c
>> new file mode 100644
>> index 000000000000..536dc34b7f82
>> --- /dev/null
>> +++ b/drivers/media/pci/mgb4/mgb4_i2c.c
>> @@ -0,0 +1,139 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (C) 2021-2022 Digiteq Automotive
>> + * author: Martin Tuma <martin.tuma@...iteqautomotive.com>
>> + */
>> +
>> +#include <linux/version.h>
>> +#include "mgb4_i2c.h"
>> +
>> +static int read_r16(struct i2c_client *client, u16 reg, u8 *val, int len)
>> +{
>> + int ret;
>> + u8 buf[2];
>> + struct i2c_msg msg[2] = {
>> + {
>> + .addr = client->addr,
>> + .flags = 0,
>> + .len = 2,
>> + .buf = buf,
>> + }, {
>> + .addr = client->addr,
>> + .flags = I2C_M_RD,
>> + .len = len,
>> + .buf = val,
>> + }
>> + };
>> +
>> + buf[0] = (reg >> 8) & 0xff;
>> + buf[1] = (reg >> 0) & 0xff;
>> +
>> + ret = i2c_transfer(client->adapter, msg, 2);
>> + if (ret < 0)
>> + return ret;
>> + else if (ret != 2)
>> + return -EREMOTEIO;
>> + else
>> + return 0;
>> +}
>> +
>> +static int write_r16(struct i2c_client *client, u16 reg, const u8 *val, int len)
>> +{
>> + int ret;
>> + u8 buf[4];
>> + struct i2c_msg msg[1] = {
>> + {
>> + .addr = client->addr,
>> + .flags = 0,
>> + .len = 2 + len,
>> + .buf = buf,
>> + }
>> + };
>> +
>> + if (2 + len > sizeof(buf))
>> + return -EINVAL;
>> +
>> + buf[0] = (reg >> 8) & 0xff;
>> + buf[1] = (reg >> 0) & 0xff;
>> + memcpy(&buf[2], val, len);
>> +
>> + ret = i2c_transfer(client->adapter, msg, 1);
>> + if (ret < 0)
>> + return ret;
>> + else if (ret != 1)
>> + return -EREMOTEIO;
>> + else
>> + return 0;
>> +}
>> +
>> +
>> +int mgb4_i2c_init(struct mgb4_i2c_client *client, struct i2c_adapter *adap,
>> + struct i2c_board_info const *info, int addr_size)
>> +{
>> + client->client = i2c_new_client_device(adap, info);
>> + if (IS_ERR(client->client))
>> + return PTR_ERR(client->client);
>> +
>> + client->addr_size = addr_size;
>> +
>> + return 0;
>> +}
>> +
>> +void mgb4_i2c_free(struct mgb4_i2c_client *client)
>> +{
>> + i2c_unregister_device(client->client);
>> +}
>> +
>> +
>> +s32 mgb4_i2c_read_byte(struct mgb4_i2c_client *client, u16 reg)
>> +{
>> + int ret;
>> + u8 b;
>> +
>> + if (client->addr_size == 8)
>> + return i2c_smbus_read_byte_data(client->client, reg);
>> +
>> + ret = read_r16(client->client, reg, &b, 1);
>> + if (ret < 0)
>> + return ret;
>> +
>> + return (s32)b;
>> +}
>> +
>> +s32 mgb4_i2c_write_byte(struct mgb4_i2c_client *client, u16 reg, u8 val)
>> +{
>> + if (client->addr_size == 8)
>> + return i2c_smbus_write_byte_data(client->client, reg, val);
>> + else
>> + return write_r16(client->client, reg, &val, 1);
>> +}
>> +
>> +s32 mgb4_i2c_mask_byte(struct mgb4_i2c_client *client, u16 reg, u8 mask, u8 val)
>> +{
>> + s32 ret;
>> +
>> + if (mask != 0xFF) {
>> + ret = mgb4_i2c_read_byte(client, reg);
>> + if (ret < 0)
>> + return ret;
>> + val |= (u8)ret & ~mask;
>> + }
>> +
>> + return mgb4_i2c_write_byte(client, reg, val);
>> +}
>> +
>> +int mgb4_i2c_configure(struct mgb4_i2c_client *client,
>> + const struct mgb4_i2c_kv *values, size_t count)
>> +{
>> + size_t i;
>> + s32 res;
>> +
>> + for (i = 0; i < count; i++) {
>> + res = mgb4_i2c_mask_byte(client, values[i].reg, values[i].mask,
>> + values[i].val);
>> + if (res < 0)
>> + return res;
>> + }
>> +
>> + return 0;
>> +}
>> diff --git a/drivers/media/pci/mgb4/mgb4_i2c.h b/drivers/media/pci/mgb4/mgb4_i2c.h
>> new file mode 100644
>> index 000000000000..e5003927509f
>> --- /dev/null
>> +++ b/drivers/media/pci/mgb4/mgb4_i2c.h
>> @@ -0,0 +1,35 @@
>> +/* SPDX-License-Identifier: GPL-2.0-only */
>> +/*
>> + * Copyright (C) 2021-2022 Digiteq Automotive
>> + * author: Martin Tuma <martin.tuma@...iteqautomotive.com>
>> + */
>> +
>> +#ifndef __MGB4_I2C_H__
>> +#define __MGB4_I2C_H__
>> +
>> +#include <linux/i2c.h>
>> +
>> +struct mgb4_i2c_client {
>> + struct i2c_client *client;
>> + int addr_size;
>> +};
>> +
>> +struct mgb4_i2c_kv {
>> + u16 reg;
>> + u8 mask;
>> + u8 val;
>> +};
>> +
>> +extern int mgb4_i2c_init(struct mgb4_i2c_client *client, struct i2c_adapter *adap,
>> + struct i2c_board_info const *info, int addr_size);
>> +extern void mgb4_i2c_free(struct mgb4_i2c_client *client);
>> +
>> +extern s32 mgb4_i2c_read_byte(struct mgb4_i2c_client *client, u16 reg);
>> +extern s32 mgb4_i2c_write_byte(struct mgb4_i2c_client *client, u16 reg, u8 val);
>> +extern s32 mgb4_i2c_mask_byte(struct mgb4_i2c_client *client, u16 reg, u8 mask,
>> + u8 val);
>> +
>> +extern int mgb4_i2c_configure(struct mgb4_i2c_client *client,
>> + const struct mgb4_i2c_kv *values, size_t count);
>> +
>> +#endif
>> diff --git a/drivers/media/pci/mgb4/mgb4_io.h b/drivers/media/pci/mgb4/mgb4_io.h
>> new file mode 100644
>> index 000000000000..dff92065f2c0
>> --- /dev/null
>> +++ b/drivers/media/pci/mgb4/mgb4_io.h
>> @@ -0,0 +1,36 @@
>> +/* SPDX-License-Identifier: GPL-2.0-only */
>> +/*
>> + * Copyright (C) 2021-2022 Digiteq Automotive
>> + * author: Martin Tuma <martin.tuma@...iteqautomotive.com>
>> + */
>> +
>> +#ifndef __MGB4_IO_H__
>> +#define __MGB4_IO_H__
>> +
>> +#include <media/v4l2-dev.h>
>> +
>> +#ifndef VFL_TYPE_GRABBER
>> +#define VFL_TYPE_GRABBER VFL_TYPE_VIDEO
>> +#endif
>> +
>> +#define ERR_NO_REG 0xFFFFFFFE
>> +#define ERR_QUEUE_TIMEOUT 0xFFFFFFFD
>> +#define ERR_QUEUE_EMPTY 0xFFFFFFFC
>> +#define ERR_QUEUE_FULL 0xFFFFFFFB
>> +
>> +#define BYTESPERLINE(width, alignment) \
>> + (((((width) * 4) - 1) | ((alignment) - 1)) + 1)
>> +#define PADDING(width, alignment) \
>> + ((BYTESPERLINE((width), (alignment)) - ((width) * 4)) / 4)
>> +
>> +struct frame_buffer {
>> + struct vb2_v4l2_buffer vb;
>> + struct list_head list;
>> +};
>> +
>> +extern inline struct frame_buffer *to_frame_buffer(struct vb2_v4l2_buffer *vbuf)
>> +{
>> + return container_of(vbuf, struct frame_buffer, vb);
>> +}
>> +
>> +#endif
>> diff --git a/drivers/media/pci/mgb4/mgb4_regs.c b/drivers/media/pci/mgb4/mgb4_regs.c
>> new file mode 100644
>> index 000000000000..53d4e4503a74
>> --- /dev/null
>> +++ b/drivers/media/pci/mgb4/mgb4_regs.c
>> @@ -0,0 +1,30 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (C) 2021-2022 Digiteq Automotive
>> + * author: Martin Tuma <martin.tuma@...iteqautomotive.com>
>> + */
>> +
>> +#include <linux/ioport.h>
>> +#include "mgb4_regs.h"
>> +
>> +int mgb4_regs_map(struct resource *res, struct mgb4_regs *regs)
>> +{
>> + regs->mapbase = res->start;
>> + regs->mapsize = res->end - res->start;
>> +
>> + if (!request_mem_region(regs->mapbase, regs->mapsize, res->name))
>> + return -EINVAL;
>> + regs->membase = ioremap(regs->mapbase, regs->mapsize);
>> + if (!regs->membase) {
>> + release_mem_region(regs->mapbase, regs->mapsize);
>> + return -EINVAL;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +void mgb4_regs_free(struct mgb4_regs *regs)
>> +{
>> + iounmap(regs->membase);
>> + release_mem_region(regs->mapbase, regs->mapsize);
>> +}
>> diff --git a/drivers/media/pci/mgb4/mgb4_regs.h b/drivers/media/pci/mgb4/mgb4_regs.h
>> new file mode 100644
>> index 000000000000..1cc16941ea45
>> --- /dev/null
>> +++ b/drivers/media/pci/mgb4/mgb4_regs.h
>> @@ -0,0 +1,35 @@
>> +/* SPDX-License-Identifier: GPL-2.0-only */
>> +/*
>> + * Copyright (C) 2021-2022 Digiteq Automotive
>> + * author: Martin Tuma <martin.tuma@...iteqautomotive.com>
>> + */
>> +
>> +#ifndef __MGB4_REGS_H__
>> +#define __MGB4_REGS_H__
>> +
>> +#include <linux/io.h>
>> +
>> +struct mgb4_regs {
>> + resource_size_t mapbase;
>> + resource_size_t mapsize;
>> + void __iomem *membase;
>> +};
>> +
>> +#define mgb4_write_reg(regs, offset, val) \
>> + iowrite32(val, (regs)->membase + (offset))
>> +#define mgb4_read_reg(regs, offset) \
>> + ioread32((regs)->membase + (offset))
>> +
>> +static inline void mgb4_mask_reg(struct mgb4_regs *regs, u32 reg, u32 mask,
>> + u32 val)
>> +{
>> + u32 ret = mgb4_read_reg(regs, reg);
>> +
>> + val |= ret & ~mask;
>> + mgb4_write_reg(regs, reg, val);
>> +}
>> +
>> +extern int mgb4_regs_map(struct resource *res, struct mgb4_regs *regs);
>> +extern void mgb4_regs_free(struct mgb4_regs *regs);
>> +
>> +#endif
>> diff --git a/drivers/media/pci/mgb4/mgb4_sysfs.h b/drivers/media/pci/mgb4/mgb4_sysfs.h
>> new file mode 100644
>> index 000000000000..2b42a8ba37f7
>> --- /dev/null
>> +++ b/drivers/media/pci/mgb4/mgb4_sysfs.h
>> @@ -0,0 +1,18 @@
>> +/* SPDX-License-Identifier: GPL-2.0-only */
>> +/*
>> + * Copyright (C) 2021-2022 Digiteq Automotive
>> + * author: Martin Tuma <martin.tuma@...iteqautomotive.com>
>> + */
>> +
>> +#ifndef __MGB4_SYSFS_H__
>> +#define __MGB4_SYSFS_H__
>> +
>> +#include <linux/sysfs.h>
>> +
>> +extern struct device_attribute *mgb4_pci_attrs[];
>> +extern struct device_attribute *mgb4_fpdl3_in_attrs[];
>> +extern struct device_attribute *mgb4_gmsl_in_attrs[];
>> +extern struct device_attribute *mgb4_fpdl3_out_attrs[];
>> +extern struct device_attribute *mgb4_gmsl_out_attrs[];
>> +
>> +#endif
>> diff --git a/drivers/media/pci/mgb4/mgb4_sysfs_in.c b/drivers/media/pci/mgb4/mgb4_sysfs_in.c
>> new file mode 100644
>> index 000000000000..fc024393c7ba
>> --- /dev/null
>> +++ b/drivers/media/pci/mgb4/mgb4_sysfs_in.c
>> @@ -0,0 +1,750 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (C) 2021-2022 Digiteq Automotive
>> + * author: Martin Tuma <martin.tuma@...iteqautomotive.com>
>> + */
>> +
>> +#include <linux/device.h>
>> +#include "mgb4_core.h"
>> +#include "mgb4_i2c.h"
>> +#include "mgb4_vin.h"
>> +#include "mgb4_cmt.h"
>> +#include "mgb4_sysfs.h"
>> +
>> +/* Common for both FPDL3 and GMSL */
>> +
>> +static ssize_t read_input_id(struct device *dev,
>> + struct device_attribute *attr, char *buf)
>> +{
>> + struct video_device *vdev = to_video_device(dev);
>> + struct mgb4_vin_dev *vindev = video_get_drvdata(vdev);
>> +
>> + return sprintf(buf, "%d\n", vindev->config->id);
>> +}
>> +
>> +static ssize_t read_oldi_lane_width(struct device *dev,
>> + struct device_attribute *attr, char *buf)
>> +{
>> + struct video_device *vdev = to_video_device(dev);
>> + struct mgb4_vin_dev *vindev = video_get_drvdata(vdev);
>> + u16 i2c_reg;
>> + u8 i2c_mask, i2c_single_val, i2c_dual_val;
>> + u32 config;
>> + int ret;
>> +
>> + i2c_reg = MGB4_IS_GMSL(vindev->mgbdev) ? 0x1CE : 0x49;
>> + i2c_mask = MGB4_IS_GMSL(vindev->mgbdev) ? 0x0E : 0x03;
>> + i2c_single_val = MGB4_IS_GMSL(vindev->mgbdev) ? 0x00 : 0x02;
>> + i2c_dual_val = MGB4_IS_GMSL(vindev->mgbdev) ? 0x0E : 0x00;
>> +
>> + mutex_lock(&vindev->mgbdev->i2c_lock);
>> + ret = mgb4_i2c_read_byte(&vindev->deser, i2c_reg);
>> + mutex_unlock(&vindev->mgbdev->i2c_lock);
>> + if (ret < 0)
>> + return -EIO;
>> +
>> + config = mgb4_read_reg(&vindev->mgbdev->video, vindev->config->regs.config);
>> +
>> + if (((config & (1U<<9)) && ((ret & i2c_mask) != i2c_dual_val))
>> + || (!(config & (1U<<9)) && ((ret & i2c_mask) != i2c_single_val))) {
>> + dev_err(dev, "I2C/FPGA register value mismatch\n");
>> + return -EINVAL;
>> + }
>> +
>> + return sprintf(buf, "%s\n", config & (1U<<9) ? "1" : "0");
>> +}
>> +
>> +static ssize_t write_oldi_lane_width(struct device *dev,
>> + struct device_attribute *attr,
>> + const char *buf, size_t count)
>> +{
>> + struct video_device *vdev = to_video_device(dev);
>> + struct mgb4_vin_dev *vindev = video_get_drvdata(vdev);
>> + u32 fpga_data;
>> + u16 i2c_reg;
>> + u8 i2c_mask, i2c_data;
>> + unsigned long val;
>> + int ret;
>> +
>> + ret = kstrtoul(buf, 10, &val);
>> + if (ret)
>> + return ret;
>> +
>> + switch (val) {
>> + case 0: /* single */
>> + fpga_data = 0;
>> + i2c_data = MGB4_IS_GMSL(vindev->mgbdev) ? 0x00 : 0x02;
>> + break;
>> + case 1: /* dual */
>> + fpga_data = 1U<<9;
>> + i2c_data = MGB4_IS_GMSL(vindev->mgbdev) ? 0x0E : 0x00;
>> + break;
>> + default:
>> + return -EINVAL;
>> + }
>> +
>> + i2c_reg = MGB4_IS_GMSL(vindev->mgbdev) ? 0x1CE : 0x49;
>> + i2c_mask = MGB4_IS_GMSL(vindev->mgbdev) ? 0x0E : 0x03;
>> +
>> + mutex_lock(&vindev->mgbdev->i2c_lock);
>> + ret = mgb4_i2c_mask_byte(&vindev->deser, i2c_reg, i2c_mask, i2c_data);
>> + mutex_unlock(&vindev->mgbdev->i2c_lock);
>> + if (ret < 0)
>> + return -EIO;
>> + mgb4_mask_reg(&vindev->mgbdev->video, vindev->config->regs.config, 1U<<9,
>> + fpga_data);
>> + if (MGB4_IS_GMSL(vindev->mgbdev)) {
>> + /* reset input link */
>> + mutex_lock(&vindev->mgbdev->i2c_lock);
>> + ret = mgb4_i2c_mask_byte(&vindev->deser, 0x10, 1U<<5, 1U<<5);
>> + mutex_unlock(&vindev->mgbdev->i2c_lock);
>> + if (ret < 0)
>> + return -EIO;
>> + }
>> +
>> + return count;
>> +}
>> +
>> +static ssize_t read_color_mapping(struct device *dev,
>> + struct device_attribute *attr, char *buf)
>> +{
>> + struct video_device *vdev = to_video_device(dev);
>> + struct mgb4_vin_dev *vindev = video_get_drvdata(vdev);
>> + u32 config = mgb4_read_reg(&vindev->mgbdev->video,
>> + vindev->config->regs.config);
>> +
>> + return sprintf(buf, "%s\n", config & (1U<<8) ? "0" : "1");
>> +}
>> +
>> +static ssize_t write_color_mapping(struct device *dev,
>> + struct device_attribute *attr,
>> + const char *buf, size_t count)
>> +{
>> + struct video_device *vdev = to_video_device(dev);
>> + struct mgb4_vin_dev *vindev = video_get_drvdata(vdev);
>> + u32 fpga_data;
>> + unsigned long val;
>> + int ret;
>> +
>> + ret = kstrtoul(buf, 10, &val);
>> + if (ret)
>> + return ret;
>> +
>> + switch (val) {
>> + case 0: /* OLDI/JEIDA */
>> + fpga_data = (1U<<8);
>> + break;
>> + case 1: /* SPWG/VESA */
>> + fpga_data = 0;
>> + break;
>> + default:
>> + return -EINVAL;
>> + }
>> +
>> + mgb4_mask_reg(&vindev->mgbdev->video, vindev->config->regs.config, 1U<<8,
>> + fpga_data);
>> +
>> + return count;
>> +}
>> +
>> +static ssize_t read_link_status(struct device *dev, struct device_attribute *attr,
>> + char *buf)
>> +{
>> + struct video_device *vdev = to_video_device(dev);
>> + struct mgb4_vin_dev *vindev = video_get_drvdata(vdev);
>> + u32 status = mgb4_read_reg(&vindev->mgbdev->video, vindev->config->regs.status);
>> +
>> + return sprintf(buf, "%s\n", status & (1U<<2) ? "1" : "0");
>> +}
>> +
>> +static ssize_t read_stream_status(struct device *dev, struct device_attribute *attr,
>> + char *buf)
>> +{
>> + struct video_device *vdev = to_video_device(dev);
>> + struct mgb4_vin_dev *vindev = video_get_drvdata(vdev);
>> + u32 status = mgb4_read_reg(&vindev->mgbdev->video, vindev->config->regs.status);
>> +
>> + return sprintf(buf, "%s\n", ((status & (1<<14)) && (status & (1<<2))
>> + && (status & (3<<9))) ? "1" : "0");
>> +}
>> +
>> +static ssize_t read_hsync_status(struct device *dev, struct device_attribute *attr,
>> + char *buf)
>> +{
>> + struct video_device *vdev = to_video_device(dev);
>> + struct mgb4_vin_dev *vindev = video_get_drvdata(vdev);
>> + u32 status = mgb4_read_reg(&vindev->mgbdev->video, vindev->config->regs.status);
>> + u32 res;
>> +
>> + if (!(status & (1U<<11)))
>> + res = 0x02; // not available
>> + else if (status & (1U<<12))
>> + res = 0x01; // active high
>> + else
>> + res = 0x00; // active low
>> +
>> + return sprintf(buf, "%u\n", res);
>> +}
>> +
>> +static ssize_t read_vsync_status(struct device *dev, struct device_attribute *attr,
>> + char *buf)
>> +{
>> + struct video_device *vdev = to_video_device(dev);
>> + struct mgb4_vin_dev *vindev = video_get_drvdata(vdev);
>> + u32 status = mgb4_read_reg(&vindev->mgbdev->video, vindev->config->regs.status);
>> + u32 res;
>> +
>> + if (!(status & (1U<<11)))
>> + res = 0x02; // not available
>> + else if (status & (1U<<13))
>> + res = 0x01; // active high
>> + else
>> + res = 0x00; // active low
>> +
>> + return sprintf(buf, "%u\n", res);
>> +}
>> +
>> +static ssize_t read_hsync_gap(struct device *dev, struct device_attribute *attr,
>> + char *buf)
>> +{
>> + struct video_device *vdev = to_video_device(dev);
>> + struct mgb4_vin_dev *vindev = video_get_drvdata(vdev);
>> + u32 sync = mgb4_read_reg(&vindev->mgbdev->video, vindev->config->regs.sync);
>> +
>> + return sprintf(buf, "%u\n", sync >> 16);
>> +}
>> +
>> +static ssize_t write_hsync_gap(struct device *dev,
>> + struct device_attribute *attr, const char *buf,
>> + size_t count)
>> +{
>> + struct video_device *vdev = to_video_device(dev);
>> + struct mgb4_vin_dev *vindev = video_get_drvdata(vdev);
>> + unsigned long val;
>> + int ret;
>> +
>> + ret = kstrtoul(buf, 10, &val);
>> + if (ret)
>> + return ret;
>> + if (val > 0xFFFF)
>> + return -EINVAL;
>> +
>> + mgb4_mask_reg(&vindev->mgbdev->video, vindev->config->regs.sync, 0xFFFF0000,
>> + val << 16);
>> +
>> + return count;
>> +}
>> +
>> +static ssize_t read_vsync_gap(struct device *dev, struct device_attribute *attr,
>> + char *buf)
>> +{
>> + struct video_device *vdev = to_video_device(dev);
>> + struct mgb4_vin_dev *vindev = video_get_drvdata(vdev);
>> + u32 sync = mgb4_read_reg(&vindev->mgbdev->video, vindev->config->regs.sync);
>> +
>> + return sprintf(buf, "%u\n", sync & 0xFFFF);
>> +}
>> +
>> +static ssize_t write_vsync_gap(struct device *dev,
>> + struct device_attribute *attr, const char *buf,
>> + size_t count)
>> +{
>> + struct video_device *vdev = to_video_device(dev);
>> + struct mgb4_vin_dev *vindev = video_get_drvdata(vdev);
>> + unsigned long val;
>> + int ret;
>> +
>> + ret = kstrtoul(buf, 10, &val);
>> + if (ret)
>> + return ret;
>> + if (val > 0xFFFF)
>> + return -EINVAL;
>> +
>> + mgb4_mask_reg(&vindev->mgbdev->video, vindev->config->regs.sync, 0xFFFF, val);
>> +
>> + return count;
>> +}
>> +
>> +static ssize_t read_pclk_frequency(struct device *dev,
>> + struct device_attribute *attr, char *buf)
>> +{
>> + struct video_device *vdev = to_video_device(dev);
>> + struct mgb4_vin_dev *vindev = video_get_drvdata(vdev);
>> + u32 freq = mgb4_read_reg(&vindev->mgbdev->video, vindev->config->regs.pclk);
>> +
>> + return sprintf(buf, "%u\n", freq);
>> +}
>> +
>> +static ssize_t read_hsync_width(struct device *dev,
>> + struct device_attribute *attr, char *buf)
>> +{
>> + struct video_device *vdev = to_video_device(dev);
>> + struct mgb4_vin_dev *vindev = video_get_drvdata(vdev);
>> + u32 sig = mgb4_read_reg(&vindev->mgbdev->video, vindev->config->regs.signal);
>> +
>> + return sprintf(buf, "%u\n", (sig & 0x00FF0000) >> 16);
>> +}
>> +
>> +static ssize_t read_vsync_width(struct device *dev,
>> + struct device_attribute *attr, char *buf)
>> +{
>> + struct video_device *vdev = to_video_device(dev);
>> + struct mgb4_vin_dev *vindev = video_get_drvdata(vdev);
>> + u32 sig = mgb4_read_reg(&vindev->mgbdev->video, vindev->config->regs.signal2);
>> +
>> + return sprintf(buf, "%u\n", (sig & 0x00FF0000) >> 16);
>> +}
>> +
>> +static ssize_t read_hback_porch(struct device *dev,
>> + struct device_attribute *attr, char *buf)
>> +{
>> + struct video_device *vdev = to_video_device(dev);
>> + struct mgb4_vin_dev *vindev = video_get_drvdata(vdev);
>> + u32 sig = mgb4_read_reg(&vindev->mgbdev->video, vindev->config->regs.signal);
>> +
>> + return sprintf(buf, "%u\n", (sig & 0x0000FF00) >> 8);
>> +}
>> +
>> +static ssize_t read_hfront_porch(struct device *dev,
>> + struct device_attribute *attr, char *buf)
>> +{
>> + struct video_device *vdev = to_video_device(dev);
>> + struct mgb4_vin_dev *vindev = video_get_drvdata(vdev);
>> + u32 sig = mgb4_read_reg(&vindev->mgbdev->video, vindev->config->regs.signal);
>> +
>> + return sprintf(buf, "%u\n", (sig & 0x000000FF));
>> +}
>> +
>> +static ssize_t read_vback_porch(struct device *dev,
>> + struct device_attribute *attr, char *buf)
>> +{
>> + struct video_device *vdev = to_video_device(dev);
>> + struct mgb4_vin_dev *vindev = video_get_drvdata(vdev);
>> + u32 sig = mgb4_read_reg(&vindev->mgbdev->video, vindev->config->regs.signal2);
>> +
>> + return sprintf(buf, "%u\n", (sig & 0x0000FF00) >> 8);
>> +}
>> +
>> +static ssize_t read_vfront_porch(struct device *dev,
>> + struct device_attribute *attr, char *buf)
>> +{
>> + struct video_device *vdev = to_video_device(dev);
>> + struct mgb4_vin_dev *vindev = video_get_drvdata(vdev);
>> + u32 sig = mgb4_read_reg(&vindev->mgbdev->video, vindev->config->regs.signal2);
>> +
>> + return sprintf(buf, "%u\n", (sig & 0x000000FF));
>> +}
>> +
>> +static ssize_t read_frequency_range(struct device *dev,
>> + struct device_attribute *attr, char *buf)
>> +{
>> + struct video_device *vdev = to_video_device(dev);
>> + struct mgb4_vin_dev *vindev = video_get_drvdata(vdev);
>> +
>> + return sprintf(buf, "%d\n", vindev->freq_range);
>> +}
>> +
>> +static ssize_t write_frequency_range(struct device *dev,
>> + struct device_attribute *attr,
>> + const char *buf, size_t count)
>> +{
>> + struct video_device *vdev = to_video_device(dev);
>> + struct mgb4_vin_dev *vindev = video_get_drvdata(vdev);
>> + unsigned long val, flags;
>> + int ret;
>> +
>> + ret = kstrtoul(buf, 10, &val);
>> + if (ret)
>> + return ret;
>> + if (val > 1)
>> + return -EINVAL;
>> +
>> + spin_lock_irqsave(&(vindev->vdev.fh_lock), flags);
>> + if (!list_empty(&(vindev->vdev.fh_list))) {
>> + spin_unlock_irqrestore(&(vindev->vdev.fh_lock), flags);
>> + return -EBUSY;
>> + }
>> +
>> + mgb4_cmt_set_vin(vindev, val);
>> + vindev->freq_range = val;
>> +
>> + spin_unlock_irqrestore(&(vindev->vdev.fh_lock), flags);
>> +
>> + return count;
>> +}
>> +
>> +static ssize_t read_alignment(struct device *dev,
>> + struct device_attribute *attr, char *buf)
>> +{
>> + struct video_device *vdev = to_video_device(dev);
>> + struct mgb4_vin_dev *vindev = video_get_drvdata(vdev);
>> +
>> + return sprintf(buf, "%d\n", vindev->alignment);
>> +}
>> +
>> +static ssize_t write_alignment(struct device *dev,
>> + struct device_attribute *attr, const char *buf,
>> + size_t count)
>> +{
>> + struct video_device *vdev = to_video_device(dev);
>> + struct mgb4_vin_dev *vindev = video_get_drvdata(vdev);
>> + unsigned long val, flags;
>> + int ret;
>> +
>> + ret = kstrtoul(buf, 10, &val);
>> + if (ret)
>> + return ret;
>> + if (!val || (val & (val - 1)))
>> + return -EINVAL;
>> +
>> + spin_lock_irqsave(&(vindev->vdev.fh_lock), flags);
>> + if (!list_empty(&(vindev->vdev.fh_list))) {
>> + spin_unlock_irqrestore(&(vindev->vdev.fh_lock), flags);
>> + return -EBUSY;
>> + }
>> +
>> + vindev->alignment = val;
>> +
>> + spin_unlock_irqrestore(&(vindev->vdev.fh_lock), flags);
>> +
>> + return count;
>> +}
>> +
>> +/* FPDL3 only */
>> +
>> +static ssize_t read_fpdl3_input_width(struct device *dev,
>> + struct device_attribute *attr, char *buf)
>> +{
>> + struct video_device *vdev = to_video_device(dev);
>> + struct mgb4_vin_dev *vindev = video_get_drvdata(vdev);
>> + s32 ret;
>> +
>> + mutex_lock(&vindev->mgbdev->i2c_lock);
>> + ret = mgb4_i2c_read_byte(&vindev->deser, 0x34);
>> + mutex_unlock(&vindev->mgbdev->i2c_lock);
>> + if (ret < 0)
>> + return -EIO;
>> +
>> + switch ((u8)ret & 0x18) {
>> + case 0:
>> + return sprintf(buf, "0\n");
>> + case 0x10:
>> + return sprintf(buf, "1\n");
>> + case 0x08:
>> + return sprintf(buf, "2\n");
>> + default:
>> + return -EINVAL;
>> + }
>> +}
>> +
>> +static ssize_t write_fpdl3_input_width(struct device *dev,
>> + struct device_attribute *attr,
>> + const char *buf, size_t count)
>> +{
>> + struct video_device *vdev = to_video_device(dev);
>> + struct mgb4_vin_dev *vindev = video_get_drvdata(vdev);
>> + u8 i2c_data;
>> + unsigned long val;
>> + int ret;
>> +
>> + ret = kstrtoul(buf, 10, &val);
>> + if (ret)
>> + return ret;
>> +
>> + switch (val) {
>> + case 0: /* auto */
>> + i2c_data = 0x00;
>> + break;
>> + case 1: /* single */
>> + i2c_data = 0x10;
>> + break;
>> + case 2: /* dual */
>> + i2c_data = 0x08;
>> + break;
>> + default:
>> + return -EINVAL;
>> + }
>> +
>> + mutex_lock(&vindev->mgbdev->i2c_lock);
>> + ret = mgb4_i2c_mask_byte(&vindev->deser, 0x34, 0x18, i2c_data);
>> + mutex_unlock(&vindev->mgbdev->i2c_lock);
>> + if (ret < 0)
>> + return -EIO;
>> +
>> + return count;
>> +}
>> +
>> +
>> +/* GMSL only */
>> +
>> +static ssize_t read_gmsl_mode(struct device *dev,
>> + struct device_attribute *attr, char *buf)
>> +{
>> + struct video_device *vdev = to_video_device(dev);
>> + struct mgb4_vin_dev *vindev = video_get_drvdata(vdev);
>> + s32 r1, r300, r3;
>> +
>> + mutex_lock(&vindev->mgbdev->i2c_lock);
>> + r1 = mgb4_i2c_read_byte(&vindev->deser, 0x01);
>> + r300 = mgb4_i2c_read_byte(&vindev->deser, 0x300);
>> + r3 = mgb4_i2c_read_byte(&vindev->deser, 0x03);
>> + mutex_unlock(&vindev->mgbdev->i2c_lock);
>> + if (r1 < 0 || r300 < 0 || r3 < 0)
>> + return -EIO;
>> +
>> + if ((r1 & 0x03) == 0x03 && (r300 & 0x0C) == 0x0C && (r3 & 0xC0) == 0xC0)
>> + return sprintf(buf, "0\n");
>> + else if ((r1 & 0x03) == 0x02 && (r300 & 0x0C) == 0x08 && (r3 & 0xC0) == 0x00)
>> + return sprintf(buf, "1\n");
>> + else if ((r1 & 0x03) == 0x01 && (r300 & 0x0C) == 0x04 && (r3 & 0xC0) == 0x00)
>> + return sprintf(buf, "2\n");
>> + else if ((r1 & 0x03) == 0x00 && (r300 & 0x0C) == 0x00 && (r3 & 0xC0) == 0x00)
>> + return sprintf(buf, "3\n");
>> + else
>> + return -EINVAL;
>> +}
>> +
>> +static ssize_t write_gmsl_mode(struct device *dev,
>> + struct device_attribute *attr, const char *buf,
>> + size_t count)
>> +{
>> + static const struct mgb4_i2c_kv G12[] = {
>> + {0x01, 0x03, 0x03}, {0x300, 0x0C, 0x0C}, {0x03, 0xC0, 0xC0}};
>> + static const struct mgb4_i2c_kv G6[] = {
>> + {0x01, 0x03, 0x02}, {0x300, 0x0C, 0x08}, {0x03, 0xC0, 0x00}};
>> + static const struct mgb4_i2c_kv G3[] = {
>> + {0x01, 0x03, 0x01}, {0x300, 0x0C, 0x04}, {0x03, 0xC0, 0x00}};
>> + static const struct mgb4_i2c_kv G1[] = {
>> + {0x01, 0x03, 0x00}, {0x300, 0x0C, 0x00}, {0x03, 0xC0, 0x00}};
>> + static const struct mgb4_i2c_kv reset[] = {
>> + {0x10, 1U<<5, 1U<<5}, {0x300, 1U<<6, 1U<<6}};
>> + struct video_device *vdev = to_video_device(dev);
>> + struct mgb4_vin_dev *vindev = video_get_drvdata(vdev);
>> + const struct mgb4_i2c_kv *values;
>> + unsigned long val;
>> + int ret;
>> +
>> + ret = kstrtoul(buf, 10, &val);
>> + if (ret)
>> + return ret;
>> +
>> + switch (val) {
>> + case 0: /* 12Gb/s */
>> + values = G12;
>> + break;
>> + case 1: /* 6Gb/s */
>> + values = G6;
>> + break;
>> + case 2: /* 3Gb/s */
>> + values = G3;
>> + break;
>> + case 3: /* 1.5Gb/s */
>> + values = G1;
>> + break;
>> + default:
>> + return -EINVAL;
>> + }
>> +
>> + mutex_lock(&vindev->mgbdev->i2c_lock);
>> + ret = mgb4_i2c_configure(&vindev->deser, values, 3);
>> + ret |= mgb4_i2c_configure(&vindev->deser, reset, 2);
>> + mutex_unlock(&vindev->mgbdev->i2c_lock);
>> + if (ret < 0)
>> + return -EIO;
>> +
>> + return count;
>> +}
>> +
>> +static ssize_t read_gmsl_stream_id(struct device *dev,
>> + struct device_attribute *attr, char *buf)
>> +{
>> + struct video_device *vdev = to_video_device(dev);
>> + struct mgb4_vin_dev *vindev = video_get_drvdata(vdev);
>> + s32 ret;
>> +
>> + mutex_lock(&vindev->mgbdev->i2c_lock);
>> + ret = mgb4_i2c_read_byte(&vindev->deser, 0xA0);
>> + mutex_unlock(&vindev->mgbdev->i2c_lock);
>> + if (ret < 0)
>> + return -EIO;
>> +
>> + return sprintf(buf, "%d\n", ret & 0x03);
>> +}
>> +
>> +static ssize_t write_gmsl_stream_id(struct device *dev,
>> + struct device_attribute *attr,
>> + const char *buf, size_t count)
>> +{
>> + struct video_device *vdev = to_video_device(dev);
>> + struct mgb4_vin_dev *vindev = video_get_drvdata(vdev);
>> + unsigned long val, flags;
>> + int ret;
>> +
>> + ret = kstrtoul(buf, 10, &val);
>> + if (ret)
>> + return ret;
>> + if (val > 3)
>> + return -EINVAL;
>> +
>> + spin_lock_irqsave(&(vindev->vdev.fh_lock), flags);
>> + ret = list_empty(&(vindev->vdev.fh_list));
>> + spin_unlock_irqrestore(&(vindev->vdev.fh_lock), flags);
>> + if (!ret)
>> + return -EBUSY;
>> +
>> + /* Formaly, there is a race condition here as the change should be formaly
>> + * done under the spinlock, but we only want to prevent a resolution change
>> + * where possible. However, resolution changes can happen anyway and the
>> + * driver can handle them (they only break the image, not the system).
>> + *
>> + * So instead of trying to workaround the spinlock - mgb4_i2c_mask_byte()
>> + * does sleep - we simply let the rare race condition happen...
>> + */
>> + mutex_lock(&vindev->mgbdev->i2c_lock);
>> + ret = mgb4_i2c_mask_byte(&vindev->deser, 0xA0, 0x03, (u8)val);
>> + mutex_unlock(&vindev->mgbdev->i2c_lock);
>> + if (ret < 0)
>> + return -EIO;
>> +
>> + return count;
>> +}
>> +
>> +static ssize_t read_gmsl_fec(struct device *dev, struct device_attribute *attr,
>> + char *buf)
>> +{
>> + struct video_device *vdev = to_video_device(dev);
>> + struct mgb4_vin_dev *vindev = video_get_drvdata(vdev);
>> + s32 r3e0, r308;
>> +
>> + mutex_lock(&vindev->mgbdev->i2c_lock);
>> + r3e0 = mgb4_i2c_read_byte(&vindev->deser, 0x3E0);
>> + r308 = mgb4_i2c_read_byte(&vindev->deser, 0x308);
>> + mutex_unlock(&vindev->mgbdev->i2c_lock);
>> + if (r3e0 < 0 || r308 < 0)
>> + return -EIO;
>> +
>> + if ((r3e0 & 0x07) == 0x00 && (r308 & 0x01) == 0x00)
>> + return sprintf(buf, "0\n");
>> + else if ((r3e0 & 0x07) == 0x07 && (r308 & 0x01) == 0x01)
>> + return sprintf(buf, "1\n");
>> + else
>> + return -EINVAL;
>> +}
>> +
>> +static ssize_t write_gmsl_fec(struct device *dev, struct device_attribute *attr,
>> + const char *buf, size_t count)
>> +{
>> + struct video_device *vdev = to_video_device(dev);
>> + struct mgb4_vin_dev *vindev = video_get_drvdata(vdev);
>> + static const struct mgb4_i2c_kv enable[] = {
>> + {0x3E0, 0x07, 0x07}, {0x308, 0x01, 0x01}};
>> + static const struct mgb4_i2c_kv disable[] = {
>> + {0x3E0, 0x07, 0x00}, {0x308, 0x01, 0x00}};
>> + static const struct mgb4_i2c_kv reset[] = {
>> + {0x10, 1U<<5, 1U<<5}, {0x300, 1U<<6, 1U<<6}};
>> + const struct mgb4_i2c_kv *values;
>> + unsigned long val;
>> + int ret;
>> +
>> + ret = kstrtoul(buf, 10, &val);
>> + if (ret)
>> + return ret;
>> +
>> + switch (val) {
>> + case 0: /* disabled */
>> + values = disable;
>> + break;
>> + case 1: /* enabled */
>> + values = enable;
>> + break;
>> + default:
>> + return -EINVAL;
>> + }
>> +
>> + mutex_lock(&vindev->mgbdev->i2c_lock);
>> + ret = mgb4_i2c_configure(&vindev->deser, values, 2);
>> + ret |= mgb4_i2c_configure(&vindev->deser, reset, 2);
>> + mutex_unlock(&vindev->mgbdev->i2c_lock);
>> + if (ret < 0)
>> + return -EIO;
>> +
>> + return count;
>> +}
>> +
>> +static DEVICE_ATTR(input_id, 0444, read_input_id, NULL);
>> +static DEVICE_ATTR(oldi_lane_width, 0644, read_oldi_lane_width,
>> + write_oldi_lane_width);
>> +static DEVICE_ATTR(color_mapping, 0644, read_color_mapping,
>> + write_color_mapping);
>> +static DEVICE_ATTR(link_status, 0444, read_link_status, NULL);
>> +static DEVICE_ATTR(stream_status, 0444, read_stream_status, NULL);
>> +static DEVICE_ATTR(hsync_status, 0444, read_hsync_status, NULL);
>> +static DEVICE_ATTR(vsync_status, 0444, read_vsync_status, NULL);
>> +static DEVICE_ATTR(hsync_gap_length, 0644, read_hsync_gap, write_hsync_gap);
>> +static DEVICE_ATTR(vsync_gap_length, 0644, read_vsync_gap, write_vsync_gap);
>> +static DEVICE_ATTR(pclk_frequency, 0444, read_pclk_frequency, NULL);
>> +static DEVICE_ATTR(hsync_width, 0444, read_hsync_width, NULL);
>> +static DEVICE_ATTR(vsync_width, 0444, read_vsync_width, NULL);
>> +static DEVICE_ATTR(hback_porch, 0444, read_hback_porch, NULL);
>> +static DEVICE_ATTR(hfront_porch, 0444, read_hfront_porch, NULL);
>> +static DEVICE_ATTR(vback_porch, 0444, read_vback_porch, NULL);
>> +static DEVICE_ATTR(vfront_porch, 0444, read_vfront_porch, NULL);
>> +static DEVICE_ATTR(frequency_range, 0644, read_frequency_range,
>> + write_frequency_range);
>> +static DEVICE_ATTR(alignment, 0644, read_alignment, write_alignment);
>> +
>> +static DEVICE_ATTR(fpdl3_input_width, 0644, read_fpdl3_input_width,
>> + write_fpdl3_input_width);
>> +
>> +static DEVICE_ATTR(gmsl_mode, 0644, read_gmsl_mode, write_gmsl_mode);
>> +static DEVICE_ATTR(gmsl_stream_id, 0644, read_gmsl_stream_id,
>> + write_gmsl_stream_id);
>> +static DEVICE_ATTR(gmsl_fec, 0644, read_gmsl_fec, write_gmsl_fec);
>> +
>> +struct device_attribute *mgb4_fpdl3_in_attrs[] = {
>> + &dev_attr_input_id,
>> + &dev_attr_link_status,
>> + &dev_attr_stream_status,
>> + &dev_attr_hsync_status,
>> + &dev_attr_vsync_status,
>> + &dev_attr_oldi_lane_width,
>> + &dev_attr_color_mapping,
>> + &dev_attr_hsync_gap_length,
>> + &dev_attr_vsync_gap_length,
>> + &dev_attr_pclk_frequency,
>> + &dev_attr_hsync_width,
>> + &dev_attr_vsync_width,
>> + &dev_attr_hback_porch,
>> + &dev_attr_hfront_porch,
>> + &dev_attr_vback_porch,
>> + &dev_attr_vfront_porch,
>> + &dev_attr_frequency_range,
>> + &dev_attr_alignment,
>> + &dev_attr_fpdl3_input_width,
>> + NULL
>> +};
>> +
>> +struct device_attribute *mgb4_gmsl_in_attrs[] = {
>> + &dev_attr_input_id,
>> + &dev_attr_link_status,
>> + &dev_attr_stream_status,
>> + &dev_attr_hsync_status,
>> + &dev_attr_vsync_status,
>> + &dev_attr_oldi_lane_width,
>> + &dev_attr_color_mapping,
>> + &dev_attr_hsync_gap_length,
>> + &dev_attr_vsync_gap_length,
>> + &dev_attr_pclk_frequency,
>> + &dev_attr_hsync_width,
>> + &dev_attr_vsync_width,
>> + &dev_attr_hback_porch,
>> + &dev_attr_hfront_porch,
>> + &dev_attr_vback_porch,
>> + &dev_attr_vfront_porch,
>> + &dev_attr_frequency_range,
>> + &dev_attr_alignment,
>> + &dev_attr_gmsl_mode,
>> + &dev_attr_gmsl_stream_id,
>> + &dev_attr_gmsl_fec,
>> + NULL
>> +};
>> diff --git a/drivers/media/pci/mgb4/mgb4_sysfs_out.c b/drivers/media/pci/mgb4/mgb4_sysfs_out.c
>> new file mode 100644
>> index 000000000000..be80b635d1d7
>> --- /dev/null
>> +++ b/drivers/media/pci/mgb4/mgb4_sysfs_out.c
>> @@ -0,0 +1,734 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (C) 2021-2022 Digiteq Automotive
>> + * author: Martin Tuma <martin.tuma@...iteqautomotive.com>
>> + */
>> +
>> +#include <linux/device.h>
>> +#include "mgb4_core.h"
>> +#include "mgb4_i2c.h"
>> +#include "mgb4_vout.h"
>> +#include "mgb4_vin.h"
>> +#include "mgb4_cmt.h"
>> +#include "mgb4_sysfs.h"
>> +
>> +static int loopin_cnt(struct mgb4_vin_dev *vindev)
>> +{
>> + struct mgb4_vout_dev *voutdev;
>> + u32 config;
>> + int i, cnt = 0;
>> +
>> + for (i = 0; i < MGB4_VOUT_DEVICES; i++) {
>> + voutdev = vindev->mgbdev->vout[i];
>> + if (!voutdev)
>> + continue;
>> +
>> + config = mgb4_read_reg(&voutdev->mgbdev->video,
>> + voutdev->config->regs.config);
>> + if ((config & 0xc) >> 2 == vindev->config->id)
>> + cnt++;
>> + }
>> +
>> + return cnt;
>> +}
>> +
>> +
>> +/* Common for both FPDL3 and GMSL */
>> +
>> +static ssize_t read_output_id(struct device *dev,
>> + struct device_attribute *attr, char *buf)
>> +{
>> + struct video_device *vdev = to_video_device(dev);
>> + struct mgb4_vout_dev *voutdev = video_get_drvdata(vdev);
>> +
>> + return sprintf(buf, "%d\n", voutdev->config->id);
>> +}
>> +
>> +static ssize_t read_video_source(struct device *dev,
>> + struct device_attribute *attr, char *buf)
>> +{
>> + struct video_device *vdev = to_video_device(dev);
>> + struct mgb4_vout_dev *voutdev = video_get_drvdata(vdev);
>> + u32 config = mgb4_read_reg(&voutdev->mgbdev->video,
>> + voutdev->config->regs.config);
>> +
>> + return sprintf(buf, "%u\n", (config & 0xc) >> 2);
>> +}
>> +
>> +static ssize_t write_video_source(struct device *dev,
>> + struct device_attribute *attr,
>> + const char *buf, size_t count)
>> +{
>> + struct video_device *vdev = to_video_device(dev);
>> + struct mgb4_vout_dev *voutdev = video_get_drvdata(vdev);
>> + struct mgb4_dev *mgbdev = voutdev->mgbdev;
>> + struct mgb4_vin_dev *loopin_new = 0, *loopin_old = 0;
>> + unsigned long val;
>> + unsigned long flags_in[MGB4_VIN_DEVICES], flags_out[MGB4_VOUT_DEVICES];
>> + ssize_t ret;
>> + u32 config;
>> + int i;
>> +
>> +
>> + memset(flags_in, 0, sizeof(flags_in));
>> + memset(flags_out, 0, sizeof(flags_out));
>> +
>> + ret = kstrtoul(buf, 10, &val);
>> + if (ret)
>> + return ret;
>> + if (val > 3)
>> + return -EINVAL;
>> +
>> + for (i = 0; i < MGB4_VIN_DEVICES; i++)
>> + if (mgbdev->vin[i])
>> + spin_lock_irqsave(&(mgbdev->vin[i]->vdev.fh_lock), flags_in[i]);
>> + for (i = 0; i < MGB4_VOUT_DEVICES; i++)
>> + if (mgbdev->vout[i])
>> + spin_lock_irqsave(&(mgbdev->vout[i]->vdev.fh_lock), flags_out[i]);
>> +
>> + ret = -EBUSY;
>> + for (i = 0; i < MGB4_VIN_DEVICES; i++)
>> + if (mgbdev->vin[i] && !list_empty(&(mgbdev->vin[i]->vdev.fh_list)))
>> + goto error;
>> + for (i = 0; i < MGB4_VOUT_DEVICES; i++)
>> + if (mgbdev->vout[i] && !list_empty(&(mgbdev->vout[i]->vdev.fh_list)))
>> + goto error;
>> +
>> + config = mgb4_read_reg(&mgbdev->video, voutdev->config->regs.config);
>> +
>> + if (((config & 0xc) >> 2) < MGB4_VIN_DEVICES)
>> + loopin_old = mgbdev->vin[(config & 0xc) >> 2];
>> + if (val < MGB4_VIN_DEVICES)
>> + loopin_new = mgbdev->vin[val];
>> + if (loopin_old && loopin_cnt(loopin_old) == 1)
>> + mgb4_mask_reg(&mgbdev->video, loopin_old->config->regs.config, 0x2, 0x0);
>> + if (loopin_new)
>> + mgb4_mask_reg(&mgbdev->video, loopin_new->config->regs.config, 0x2, 0x2);
>> +
>> + if (val == voutdev->config->id + MGB4_VIN_DEVICES)
>> + mgb4_write_reg(&mgbdev->video, voutdev->config->regs.config,
>> + config & ~(1<<1));
>> + else
>> + mgb4_write_reg(&mgbdev->video, voutdev->config->regs.config,
>> + config | (1U<<1));
>> +
>> + mgb4_mask_reg(&mgbdev->video, voutdev->config->regs.config, 0xc, val << 2);
>> +
>> + ret = count;
>> +
>> +error:
>> + for (i = MGB4_VOUT_DEVICES - 1; i >= 0; i--)
>> + if (mgbdev->vout[i])
>> + spin_unlock_irqrestore(&(mgbdev->vout[i]->vdev.fh_lock), flags_out[i]);
>> + for (i = MGB4_VIN_DEVICES - 1; i >= 0; i--)
>> + if (mgbdev->vin[i])
>> + spin_unlock_irqrestore(&(mgbdev->vin[i]->vdev.fh_lock), flags_in[i]);
>> +
>> + return ret;
>> +}
>> +
>> +static ssize_t read_display_width(struct device *dev,
>> + struct device_attribute *attr, char *buf)
>> +{
>> + struct video_device *vdev = to_video_device(dev);
>> + struct mgb4_vout_dev *voutdev = video_get_drvdata(vdev);
>> + u32 config = mgb4_read_reg(&voutdev->mgbdev->video,
>> + voutdev->config->regs.resolution);
>> +
>> + return sprintf(buf, "%u\n", config >> 16);
>> +}
>> +
>> +static ssize_t write_display_width(struct device *dev,
>> + struct device_attribute *attr,
>> + const char *buf, size_t count)
>> +{
>> + struct video_device *vdev = to_video_device(dev);
>> + struct mgb4_vout_dev *voutdev = video_get_drvdata(vdev);
>> + unsigned long val, flags;
>> + int ret, busy;
>> +
>> + ret = kstrtoul(buf, 10, &val);
>> + if (ret)
>> + return ret;
>> + if (val > 0xFFFF)
>> + return -EINVAL;
>> +
>> + spin_lock_irqsave(&(voutdev->vdev.fh_lock), flags);
>> + busy = !list_empty(&(voutdev->vdev.fh_list));
>> + if (busy) {
>> + spin_unlock_irqrestore(&(voutdev->vdev.fh_lock), flags);
>> + return -EBUSY;
>> + }
>> +
>> + mgb4_mask_reg(&voutdev->mgbdev->video, voutdev->config->regs.resolution,
>> + 0xFFFF0000, val << 16);
>> +
>> + spin_unlock_irqrestore(&(voutdev->vdev.fh_lock), flags);
>> +
>> + return count;
>> +}
>> +
>> +static ssize_t read_display_height(struct device *dev,
>> + struct device_attribute *attr, char *buf)
>> +{
>> + struct video_device *vdev = to_video_device(dev);
>> + struct mgb4_vout_dev *voutdev = video_get_drvdata(vdev);
>> + u32 config = mgb4_read_reg(&voutdev->mgbdev->video,
>> + voutdev->config->regs.resolution);
>> +
>> + return sprintf(buf, "%u\n", config & 0xFFFF);
>> +}
>> +
>> +static ssize_t write_display_height(struct device *dev,
>> + struct device_attribute *attr,
>> + const char *buf, size_t count)
>> +{
>> + struct video_device *vdev = to_video_device(dev);
>> + struct mgb4_vout_dev *voutdev = video_get_drvdata(vdev);
>> + unsigned long val, flags;
>> + int ret, busy;
>> +
>> + ret = kstrtoul(buf, 10, &val);
>> + if (ret)
>> + return ret;
>> + if (val > 0xFFFF)
>> + return -EINVAL;
>> +
>> + spin_lock_irqsave(&(voutdev->vdev.fh_lock), flags);
>> + busy = !list_empty(&(voutdev->vdev.fh_list));
>> + if (busy) {
>> + spin_unlock_irqrestore(&(voutdev->vdev.fh_lock), flags);
>> + return -EBUSY;
>> + }
>> +
>> + mgb4_mask_reg(&voutdev->mgbdev->video, voutdev->config->regs.resolution,
>> + 0xFFFF, val);
>> +
>> + spin_unlock_irqrestore(&(voutdev->vdev.fh_lock), flags);
>> +
>> + return count;
>> +}
>> +
>> +static ssize_t read_frame_rate(struct device *dev,
>> + struct device_attribute *attr, char *buf)
>> +{
>> + struct video_device *vdev = to_video_device(dev);
>> + struct mgb4_vout_dev *voutdev = video_get_drvdata(vdev);
>> + u32 period = mgb4_read_reg(&voutdev->mgbdev->video,
>> + voutdev->config->regs.frame_period);
>> +
>> + return sprintf(buf, "%u\n", 125000000 / period);
>> +}
>> +
>> +static ssize_t write_frame_rate(struct device *dev,
>> + struct device_attribute *attr, const char *buf,
>> + size_t count)
>> +{
>> + struct video_device *vdev = to_video_device(dev);
>> + struct mgb4_vout_dev *voutdev = video_get_drvdata(vdev);
>> + unsigned long val;
>> + int ret;
>> +
>> + ret = kstrtoul(buf, 10, &val);
>> + if (ret)
>> + return ret;
>> +
>> + mgb4_write_reg(&voutdev->mgbdev->video, voutdev->config->regs.frame_period,
>> + 125000000 / val);
>> +
>> + return count;
>> +}
>> +
>> +static ssize_t read_hsync_width(struct device *dev,
>> + struct device_attribute *attr, char *buf)
>> +{
>> + struct video_device *vdev = to_video_device(dev);
>> + struct mgb4_vout_dev *voutdev = video_get_drvdata(vdev);
>> + u32 sig = mgb4_read_reg(&voutdev->mgbdev->video, voutdev->config->regs.hsync);
>> +
>> + return sprintf(buf, "%u\n", (sig & 0x00FF0000) >> 16);
>> +}
>> +
>> +static ssize_t write_hsync_width(struct device *dev,
>> + struct device_attribute *attr, const char *buf,
>> + size_t count)
>> +{
>> + struct video_device *vdev = to_video_device(dev);
>> + struct mgb4_vout_dev *voutdev = video_get_drvdata(vdev);
>> + unsigned long val;
>> + int ret;
>> +
>> + ret = kstrtoul(buf, 10, &val);
>> + if (ret)
>> + return ret;
>> + if (val > 0xFF)
>> + return -EINVAL;
>> +
>> + mgb4_mask_reg(&voutdev->mgbdev->video, voutdev->config->regs.hsync,
>> + 0x00FF0000, val << 16);
>> +
>> + return count;
>> +}
>> +
>> +static ssize_t read_vsync_width(struct device *dev,
>> + struct device_attribute *attr, char *buf)
>> +{
>> + struct video_device *vdev = to_video_device(dev);
>> + struct mgb4_vout_dev *voutdev = video_get_drvdata(vdev);
>> + u32 sig = mgb4_read_reg(&voutdev->mgbdev->video, voutdev->config->regs.vsync);
>> +
>> + return sprintf(buf, "%u\n", (sig & 0x00FF0000) >> 16);
>> +}
>> +
>> +static ssize_t write_vsync_width(struct device *dev,
>> + struct device_attribute *attr, const char *buf,
>> + size_t count)
>> +{
>> + struct video_device *vdev = to_video_device(dev);
>> + struct mgb4_vout_dev *voutdev = video_get_drvdata(vdev);
>> + unsigned long val;
>> + int ret;
>> +
>> + ret = kstrtoul(buf, 10, &val);
>> + if (ret)
>> + return ret;
>> + if (val > 0xFF)
>> + return -EINVAL;
>> +
>> + mgb4_mask_reg(&voutdev->mgbdev->video, voutdev->config->regs.vsync,
>> + 0x00FF0000, val << 16);
>> +
>> + return count;
>> +}
>> +
>> +static ssize_t read_hback_porch(struct device *dev,
>> + struct device_attribute *attr, char *buf)
>> +{
>> + struct video_device *vdev = to_video_device(dev);
>> + struct mgb4_vout_dev *voutdev = video_get_drvdata(vdev);
>> + u32 sig = mgb4_read_reg(&voutdev->mgbdev->video, voutdev->config->regs.hsync);
>> +
>> + return sprintf(buf, "%u\n", (sig & 0x0000FF00) >> 8);
>> +}
>> +
>> +static ssize_t write_hback_porch(struct device *dev,
>> + struct device_attribute *attr, const char *buf,
>> + size_t count)
>> +{
>> + struct video_device *vdev = to_video_device(dev);
>> + struct mgb4_vout_dev *voutdev = video_get_drvdata(vdev);
>> + unsigned long val;
>> + int ret;
>> +
>> + ret = kstrtoul(buf, 10, &val);
>> + if (ret)
>> + return ret;
>> + if (val > 0xFF)
>> + return -EINVAL;
>> +
>> + mgb4_mask_reg(&voutdev->mgbdev->video, voutdev->config->regs.hsync,
>> + 0x0000FF00, val << 8);
>> +
>> + return count;
>> +}
>> +
>> +static ssize_t read_vback_porch(struct device *dev,
>> + struct device_attribute *attr, char *buf)
>> +{
>> + struct video_device *vdev = to_video_device(dev);
>> + struct mgb4_vout_dev *voutdev = video_get_drvdata(vdev);
>> + u32 sig = mgb4_read_reg(&voutdev->mgbdev->video, voutdev->config->regs.vsync);
>> +
>> + return sprintf(buf, "%u\n", (sig & 0x0000FF00) >> 8);
>> +}
>> +
>> +static ssize_t write_vback_porch(struct device *dev,
>> + struct device_attribute *attr, const char *buf,
>> + size_t count)
>> +{
>> + struct video_device *vdev = to_video_device(dev);
>> + struct mgb4_vout_dev *voutdev = video_get_drvdata(vdev);
>> + unsigned long val;
>> + int ret;
>> +
>> + ret = kstrtoul(buf, 10, &val);
>> + if (ret)
>> + return ret;
>> + if (val > 0xFF)
>> + return -EINVAL;
>> +
>> + mgb4_mask_reg(&voutdev->mgbdev->video, voutdev->config->regs.vsync,
>> + 0x0000FF00, val << 8);
>> +
>> + return count;
>> +}
>> +
>> +static ssize_t read_hfront_porch(struct device *dev,
>> + struct device_attribute *attr, char *buf)
>> +{
>> + struct video_device *vdev = to_video_device(dev);
>> + struct mgb4_vout_dev *voutdev = video_get_drvdata(vdev);
>> + u32 sig = mgb4_read_reg(&voutdev->mgbdev->video, voutdev->config->regs.hsync);
>> +
>> + return sprintf(buf, "%u\n", (sig & 0x000000FF));
>> +}
>> +
>> +static ssize_t write_hfront_porch(struct device *dev,
>> + struct device_attribute *attr,
>> + const char *buf, size_t count)
>> +{
>> + struct video_device *vdev = to_video_device(dev);
>> + struct mgb4_vout_dev *voutdev = video_get_drvdata(vdev);
>> + unsigned long val;
>> + int ret;
>> +
>> + ret = kstrtoul(buf, 10, &val);
>> + if (ret)
>> + return ret;
>> + if (val > 0xFF)
>> + return -EINVAL;
>> +
>> + mgb4_mask_reg(&voutdev->mgbdev->video, voutdev->config->regs.hsync,
>> + 0x000000FF, val);
>> +
>> + return count;
>> +}
>> +
>> +static ssize_t read_vfront_porch(struct device *dev,
>> + struct device_attribute *attr, char *buf)
>> +{
>> + struct video_device *vdev = to_video_device(dev);
>> + struct mgb4_vout_dev *voutdev = video_get_drvdata(vdev);
>> + u32 sig = mgb4_read_reg(&voutdev->mgbdev->video, voutdev->config->regs.vsync);
>> +
>> + return sprintf(buf, "%u\n", (sig & 0x000000FF));
>> +}
>> +
>> +static ssize_t write_vfront_porch(struct device *dev,
>> + struct device_attribute *attr, const char *buf,
>> + size_t count)
>> +{
>> + struct video_device *vdev = to_video_device(dev);
>> + struct mgb4_vout_dev *voutdev = video_get_drvdata(vdev);
>> + unsigned long val;
>> + int ret;
>> +
>> + ret = kstrtoul(buf, 10, &val);
>> + if (ret)
>> + return ret;
>> + if (val > 0xFF)
>> + return -EINVAL;
>> +
>> + mgb4_mask_reg(&voutdev->mgbdev->video, voutdev->config->regs.vsync,
>> + 0x000000FF, val);
>> +
>> + return count;
>> +}
>> +
>> +static ssize_t read_alignment(struct device *dev,
>> + struct device_attribute *attr, char *buf)
>> +{
>> + struct video_device *vdev = to_video_device(dev);
>> + struct mgb4_vout_dev *voutdev = video_get_drvdata(vdev);
>> +
>> + return sprintf(buf, "%d\n", voutdev->alignment);
>> +}
>> +
>> +static ssize_t write_alignment(struct device *dev,
>> + struct device_attribute *attr, const char *buf,
>> + size_t count)
>> +{
>> + struct video_device *vdev = to_video_device(dev);
>> + struct mgb4_vout_dev *voutdev = video_get_drvdata(vdev);
>> + unsigned long val, flags;
>> + u32 config;
>> + int ret;
>> +
>> + ret = kstrtoul(buf, 10, &val);
>> + if (ret)
>> + return ret;
>> + if (!val || (val & (val - 1)))
>> + return -EINVAL;
>> +
>> + spin_lock_irqsave(&(voutdev->vdev.fh_lock), flags);
>> + if (!list_empty(&(voutdev->vdev.fh_list))) {
>> + spin_unlock_irqrestore(&(voutdev->vdev.fh_lock), flags);
>> + return -EBUSY;
>> + }
>> + /* Do not allow the change if loopback is active */
>> + config = mgb4_read_reg(&voutdev->mgbdev->video, voutdev->config->regs.config);
>> + if (((config & 0xc) >> 2) < 2) {
>> + spin_unlock_irqrestore(&(voutdev->vdev.fh_lock), flags);
>> + return -EPERM;
>> + }
>> +
>> + voutdev->alignment = val;
>> +
>> + spin_unlock_irqrestore(&(voutdev->vdev.fh_lock), flags);
>> +
>> + return count;
>> +}
>> +
>> +/* FPDL3 only */
>> +
>> +static ssize_t read_hsync_polarity(struct device *dev,
>> + struct device_attribute *attr, char *buf)
>> +{
>> + struct video_device *vdev = to_video_device(dev);
>> + struct mgb4_vout_dev *voutdev = video_get_drvdata(vdev);
>> + u32 config = mgb4_read_reg(&voutdev->mgbdev->video,
>> + voutdev->config->regs.hsync);
>> +
>> + return sprintf(buf, "%u\n", (config & (1<<31)) >> 31);
>> +}
>> +
>> +static ssize_t write_hsync_polarity(struct device *dev,
>> + struct device_attribute *attr,
>> + const char *buf, size_t count)
>> +{
>> + struct video_device *vdev = to_video_device(dev);
>> + struct mgb4_vout_dev *voutdev = video_get_drvdata(vdev);
>> + unsigned long val;
>> + int ret;
>> +
>> + ret = kstrtoul(buf, 10, &val);
>> + if (ret)
>> + return ret;
>> + if (val > 1)
>> + return -EINVAL;
>> +
>> + mgb4_mask_reg(&voutdev->mgbdev->video, voutdev->config->regs.hsync, (1<<31),
>> + val << 31);
>> +
>> + return count;
>> +}
>> +
>> +static ssize_t read_vsync_polarity(struct device *dev,
>> + struct device_attribute *attr, char *buf)
>> +{
>> + struct video_device *vdev = to_video_device(dev);
>> + struct mgb4_vout_dev *voutdev = video_get_drvdata(vdev);
>> + u32 config = mgb4_read_reg(&voutdev->mgbdev->video,
>> + voutdev->config->regs.vsync);
>> +
>> + return sprintf(buf, "%u\n", (config & (1<<31)) >> 31);
>> +}
>> +
>> +static ssize_t write_vsync_polarity(struct device *dev,
>> + struct device_attribute *attr,
>> + const char *buf, size_t count)
>> +{
>> + struct video_device *vdev = to_video_device(dev);
>> + struct mgb4_vout_dev *voutdev = video_get_drvdata(vdev);
>> + unsigned long val;
>> + int ret;
>> +
>> + ret = kstrtoul(buf, 10, &val);
>> + if (ret)
>> + return ret;
>> + if (val > 1)
>> + return -EINVAL;
>> +
>> + mgb4_mask_reg(&voutdev->mgbdev->video, voutdev->config->regs.vsync, (1<<31),
>> + val << 31);
>> +
>> + return count;
>> +}
>> +
>> +static ssize_t read_de_polarity(struct device *dev,
>> + struct device_attribute *attr, char *buf)
>> +{
>> + struct video_device *vdev = to_video_device(dev);
>> + struct mgb4_vout_dev *voutdev = video_get_drvdata(vdev);
>> + u32 config = mgb4_read_reg(&voutdev->mgbdev->video,
>> + voutdev->config->regs.vsync);
>> +
>> + return sprintf(buf, "%u\n", (config & (1<<30)) >> 30);
>> +}
>> +
>> +static ssize_t write_de_polarity(struct device *dev,
>> + struct device_attribute *attr, const char *buf,
>> + size_t count)
>> +{
>> + struct video_device *vdev = to_video_device(dev);
>> + struct mgb4_vout_dev *voutdev = video_get_drvdata(vdev);
>> + unsigned long val;
>> + int ret;
>> +
>> + ret = kstrtoul(buf, 10, &val);
>> + if (ret)
>> + return ret;
>> + if (val > 1)
>> + return -EINVAL;
>> +
>> + mgb4_mask_reg(&voutdev->mgbdev->video, voutdev->config->regs.vsync, (1<<30),
>> + val << 30);
>> +
>> + return count;
>> +}
>> +
>> +static ssize_t read_fpdl3_output_width(struct device *dev,
>> + struct device_attribute *attr, char *buf)
>> +{
>> + struct video_device *vdev = to_video_device(dev);
>> + struct mgb4_vout_dev *voutdev = video_get_drvdata(vdev);
>> + s32 ret;
>> +
>> + mutex_lock(&voutdev->mgbdev->i2c_lock);
>> + ret = mgb4_i2c_read_byte(&voutdev->ser, 0x5B);
>> + mutex_unlock(&voutdev->mgbdev->i2c_lock);
>> + if (ret < 0)
>> + return -EIO;
>> +
>> + switch ((u8)ret & 0x03) {
>> + case 0:
>> + return sprintf(buf, "0\n");
>> + case 1:
>> + return sprintf(buf, "1\n");
>> + case 3:
>> + return sprintf(buf, "2\n");
>> + default:
>> + return -EINVAL;
>> + }
>> +}
>> +
>> +static ssize_t write_fpdl3_output_width(struct device *dev,
>> + struct device_attribute *attr,
>> + const char *buf, size_t count)
>> +{
>> + struct video_device *vdev = to_video_device(dev);
>> + struct mgb4_vout_dev *voutdev = video_get_drvdata(vdev);
>> + u8 i2c_data;
>> + unsigned long val;
>> + int ret;
>> +
>> + ret = kstrtoul(buf, 10, &val);
>> + if (ret)
>> + return ret;
>> +
>> + switch (val) {
>> + case 0: /* auto */
>> + i2c_data = 0x00;
>> + break;
>> + case 1: /* single */
>> + i2c_data = 0x01;
>> + break;
>> + case 2: /* dual */
>> + i2c_data = 0x03;
>> + break;
>> + default:
>> + return -EINVAL;
>> + }
>> +
>> + mutex_lock(&voutdev->mgbdev->i2c_lock);
>> + ret = mgb4_i2c_mask_byte(&voutdev->ser, 0x5B, 0x03, i2c_data);
>> + mutex_unlock(&voutdev->mgbdev->i2c_lock);
>> + if (ret < 0)
>> + return -EIO;
>> +
>> + return count;
>> +}
>> +
>> +static ssize_t read_pclk_frequency(struct device *dev,
>> + struct device_attribute *attr, char *buf)
>> +{
>> + struct video_device *vdev = to_video_device(dev);
>> + struct mgb4_vout_dev *voutdev = video_get_drvdata(vdev);
>> +
>> + return sprintf(buf, "%u\n", voutdev->freq);
>> +}
>> +
>> +static ssize_t write_pclk_frequency(struct device *dev,
>> + struct device_attribute *attr,
>> + const char *buf, size_t count)
>> +{
>> + struct video_device *vdev = to_video_device(dev);
>> + struct mgb4_vout_dev *voutdev = video_get_drvdata(vdev);
>> + unsigned long val, flags;
>> + int ret, busy;
>> + unsigned int dp;
>> +
>> + ret = kstrtoul(buf, 10, &val);
>> + if (ret)
>> + return ret;
>> +
>> + spin_lock_irqsave(&(voutdev->vdev.fh_lock), flags);
>> + busy = !list_empty(&(voutdev->vdev.fh_list));
>> + if (busy) {
>> + spin_unlock_irqrestore(&(voutdev->vdev.fh_lock), flags);
>> + return -EBUSY;
>> + }
>> +
>> + dp = (val > 50000) ? 1 : 0;
>> + voutdev->freq = mgb4_cmt_set_vout(voutdev, val >> dp) << dp;
>> +
>> + spin_unlock_irqrestore(&(voutdev->vdev.fh_lock), flags);
>> +
>> + mgb4_mask_reg(&voutdev->mgbdev->video, voutdev->config->regs.config,
>> + 0x10, dp << 4);
>> + mutex_lock(&voutdev->mgbdev->i2c_lock);
>> + ret = mgb4_i2c_mask_byte(&voutdev->ser, 0x4F, 1<<6, ((~dp)&1)<<6);
>> + mutex_unlock(&voutdev->mgbdev->i2c_lock);
>> + if (ret < 0)
>> + return -EIO;
>> +
>> + return count;
>> +}
>> +
>> +
>> +static DEVICE_ATTR(output_id, 0444, read_output_id, NULL);
>> +static DEVICE_ATTR(video_source, 0644, read_video_source, write_video_source);
>> +static DEVICE_ATTR(display_width, 0644, read_display_width,
>> + write_display_width);
>> +static DEVICE_ATTR(display_height, 0644, read_display_height,
>> + write_display_height);
>> +static DEVICE_ATTR(frame_rate, 0644, read_frame_rate, write_frame_rate);
>> +static DEVICE_ATTR(hsync_polarity, 0644, read_hsync_polarity,
>> + write_hsync_polarity);
>> +static DEVICE_ATTR(vsync_polarity, 0644, read_vsync_polarity,
>> + write_vsync_polarity);
>> +static DEVICE_ATTR(de_polarity, 0644, read_de_polarity,
>> + write_de_polarity);
>> +static DEVICE_ATTR(pclk_frequency, 0644, read_pclk_frequency,
>> + write_pclk_frequency);
>> +static DEVICE_ATTR(hsync_width, 0644, read_hsync_width, write_hsync_width);
>> +static DEVICE_ATTR(vsync_width, 0644, read_vsync_width, write_vsync_width);
>> +static DEVICE_ATTR(hback_porch, 0644, read_hback_porch, write_hback_porch);
>> +static DEVICE_ATTR(hfront_porch, 0644, read_hfront_porch, write_hfront_porch);
>> +static DEVICE_ATTR(vback_porch, 0644, read_vback_porch, write_vback_porch);
>> +static DEVICE_ATTR(vfront_porch, 0644, read_vfront_porch, write_vfront_porch);
>> +static DEVICE_ATTR(alignment, 0644, read_alignment, write_alignment);
>> +
>> +static DEVICE_ATTR(fpdl3_output_width, 0644, read_fpdl3_output_width,
>> + write_fpdl3_output_width);
>> +
>> +
>> +struct device_attribute *mgb4_fpdl3_out_attrs[] = {
>> + &dev_attr_output_id,
>> + &dev_attr_video_source,
>> + &dev_attr_display_width,
>> + &dev_attr_display_height,
>> + &dev_attr_frame_rate,
>> + &dev_attr_hsync_polarity,
>> + &dev_attr_vsync_polarity,
>> + &dev_attr_de_polarity,
>> + &dev_attr_pclk_frequency,
>> + &dev_attr_hsync_width,
>> + &dev_attr_vsync_width,
>> + &dev_attr_hback_porch,
>> + &dev_attr_hfront_porch,
>> + &dev_attr_vback_porch,
>> + &dev_attr_vfront_porch,
>> + &dev_attr_alignment,
>> + &dev_attr_fpdl3_output_width,
>> + NULL
>> +};
>> +
>> +struct device_attribute *mgb4_gmsl_out_attrs[] = {
>> + &dev_attr_output_id,
>> + &dev_attr_video_source,
>> + &dev_attr_display_width,
>> + &dev_attr_display_height,
>> + &dev_attr_frame_rate,
>> + NULL
>> +};
>> diff --git a/drivers/media/pci/mgb4/mgb4_sysfs_pci.c b/drivers/media/pci/mgb4/mgb4_sysfs_pci.c
>> new file mode 100644
>> index 000000000000..a7f59cd9cfc9
>> --- /dev/null
>> +++ b/drivers/media/pci/mgb4/mgb4_sysfs_pci.c
>> @@ -0,0 +1,83 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (C) 2021-2022 Digiteq Automotive
>> + * author: Martin Tuma <martin.tuma@...iteqautomotive.com>
>> + */
>> +
>> +#include <linux/device.h>
>> +#include "mgb4_core.h"
>> +#include "mgb4_sysfs.h"
>> +
>> +static ssize_t read_module_version(struct device *dev,
>> + struct device_attribute *attr, char *buf)
>> +{
>> + struct mgb4_dev *mgbdev = dev_get_drvdata(dev);
>> +
>> + return sprintf(buf, "%u\n", mgbdev->module_version & 0x0F);
>> +}
>> +
>> +static ssize_t read_module_type(struct device *dev,
>> + struct device_attribute *attr, char *buf)
>> +{
>> + struct mgb4_dev *mgbdev = dev_get_drvdata(dev);
>> +
>> + return sprintf(buf, "%u\n", mgbdev->module_version >> 4);
>> +}
>> +
>> +static ssize_t read_fw_version(struct device *dev,
>> + struct device_attribute *attr, char *buf)
>> +{
>> + struct mgb4_dev *mgbdev = dev_get_drvdata(dev);
>> + u32 config = mgb4_read_reg(&mgbdev->video, 0xC4);
>> +
>> + return sprintf(buf, "%u\n", config & 0xFFFF);
>> +}
>> +
>> +static ssize_t read_fw_type(struct device *dev,
>> + struct device_attribute *attr, char *buf)
>> +{
>> + struct mgb4_dev *mgbdev = dev_get_drvdata(dev);
>> + u32 config = mgb4_read_reg(&mgbdev->video, 0xC4);
>> +
>> + return sprintf(buf, "%u\n", config >> 24);
>> +}
>> +
>> +static ssize_t read_serial_number(struct device *dev,
>> + struct device_attribute *attr, char *buf)
>> +{
>> + struct mgb4_dev *mgbdev = dev_get_drvdata(dev);
>> + u32 sn = mgbdev->serial_number;
>> +
>> + return sprintf(buf, "%03d-%03d-%03d-%03d\n", sn >> 24, (sn >> 16) & 0xFF,
>> + (sn >> 8) & 0xFF, sn & 0xFF);
>> +}
>> +
>> +static ssize_t read_temperature(struct device *dev,
>> + struct device_attribute *attr, char *buf)
>> +{
>> + struct mgb4_dev *mgbdev = dev_get_drvdata(dev);
>> + u32 val10, val;
>> +
>> + val = mgb4_read_reg(&mgbdev->video, 0xD0);
>> + val10 = ((((val >> 20) & 0xFFF) * 503975) - 1118822400) / 409600;
>> +
>> + return sprintf(buf, "%u\n", ((val10 % 10) > 4)
>> + ? (val10 / 10) + 1 : val10 / 10);
>> +}
>> +
>> +static DEVICE_ATTR(module_version, 0444, read_module_version, NULL);
>> +static DEVICE_ATTR(module_type, 0444, read_module_type, NULL);
>> +static DEVICE_ATTR(fw_version, 0444, read_fw_version, NULL);
>> +static DEVICE_ATTR(fw_type, 0444, read_fw_type, NULL);
>> +static DEVICE_ATTR(serial_number, 0444, read_serial_number, NULL);
>> +static DEVICE_ATTR(temperature, 0444, read_temperature, NULL);
>> +
>> +struct device_attribute *mgb4_pci_attrs[] = {
>> + &dev_attr_module_type,
>> + &dev_attr_module_version,
>> + &dev_attr_fw_type,
>> + &dev_attr_fw_version,
>> + &dev_attr_serial_number,
>> + &dev_attr_temperature,
>> + NULL
>> +};
>> diff --git a/drivers/media/pci/mgb4/mgb4_trigger.c b/drivers/media/pci/mgb4/mgb4_trigger.c
>> new file mode 100644
>> index 000000000000..607ca33104c2
>> --- /dev/null
>> +++ b/drivers/media/pci/mgb4/mgb4_trigger.c
>> @@ -0,0 +1,203 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (C) 2021-2022 Digiteq Automotive
>> + * author: Martin Tuma <martin.tuma@...iteqautomotive.com>
>> + */
>> +
>> +#include <linux/version.h>
>> +#include <linux/iio/iio.h>
>> +#include <linux/iio/buffer.h>
>> +#include <linux/iio/trigger.h>
>> +#include <linux/iio/trigger_consumer.h>
>> +#include <linux/iio/triggered_buffer.h>
>> +#include <linux/pci.h>
>> +#include <linux/dma/amd_xdma.h>
>> +#include "mgb4_core.h"
>> +#include "mgb4_trigger.h"
>> +
>> +struct trigger_data {
>> + struct mgb4_dev *mgbdev;
>> + struct iio_trigger *trig;
>> +};
>> +
>> +static int trigger_read_raw(struct iio_dev *indio_dev,
>> + struct iio_chan_spec const *chan, int *val,
>> + int *val2, long mask)
>> +{
>> + struct trigger_data *st = iio_priv(indio_dev);
>> +
>> + switch (mask) {
>> + case IIO_CHAN_INFO_RAW:
>> + if (iio_buffer_enabled(indio_dev))
>> + return -EBUSY;
>> + *val = mgb4_read_reg(&st->mgbdev->video, 0xA0);
>> +
>> + return IIO_VAL_INT;
>> + }
>> +
>> + return -EINVAL;
>> +}
>> +
>> +static int trigger_set_state(struct iio_trigger *trig, bool state)
>> +{
>> + struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
>> + struct trigger_data *st = iio_priv(indio_dev);
>> + int irq = xdma_get_user_irq(st->mgbdev->xdev, 11);
>> +
>> + if (state)
>> + xdma_enable_user_irq(st->mgbdev->xdev, irq);
>> + else
>> + xdma_disable_user_irq(st->mgbdev->xdev, irq);
>> +
>> + return 0;
>> +}
>> +
>> +static const struct iio_trigger_ops trigger_ops = {
>> + .set_trigger_state = &trigger_set_state,
>> +};
>> +
>> +static const struct iio_info trigger_info = {
>> + .read_raw = trigger_read_raw,
>> +};
>> +
>> +#define TRIGGER_CHANNEL(_si) { \
>> + .type = IIO_ACTIVITY, \
>> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
>> + .scan_index = _si, \
>> + .scan_type = { \
>> + .sign = 'u', \
>> + .realbits = 32, \
>> + .storagebits = 32, \
>> + .shift = 0, \
>> + .endianness = IIO_CPU \
>> + }, \
>> +}
>> +
>> +static const struct iio_chan_spec trigger_channels[] = {
>> + TRIGGER_CHANNEL(0),
>> + IIO_CHAN_SOFT_TIMESTAMP(1),
>> +};
>> +
>> +static irqreturn_t trigger_handler(int irq, void *p)
>> +{
>> + struct iio_poll_func *pf = p;
>> + struct iio_dev *indio_dev = pf->indio_dev;
>> + struct trigger_data *st = iio_priv(indio_dev);
>> + struct {
>> + u32 data;
>> + s64 ts __aligned(8);
>> + } scan;
>> +
>> + scan.data = mgb4_read_reg(&st->mgbdev->video, 0xA0);
>> + mgb4_write_reg(&st->mgbdev->video, 0xA0, scan.data);
>> +
>> + iio_push_to_buffers_with_timestamp(indio_dev, &scan, pf->timestamp);
>> + iio_trigger_notify_done(indio_dev->trig);
>> +
>> + mgb4_write_reg(&st->mgbdev->video, 0xB4, 1U<<11);
>> +
>> + return IRQ_HANDLED;
>> +}
>> +
>> +static int probe_trigger(struct iio_dev *indio_dev, int irq)
>> +{
>> + int ret;
>> + struct trigger_data *st = iio_priv(indio_dev);
>> +
>> + st->trig = iio_trigger_alloc(&st->mgbdev->pdev->dev, "%s-dev%d",
>> + indio_dev->name, iio_device_id(indio_dev));
>> + if (!st->trig)
>> + return -ENOMEM;
>> +
>> + ret = request_irq(irq, &iio_trigger_generic_data_rdy_poll,
>> + 0, "mgb4-trigger", st->trig);
>> + if (ret)
>> + goto error_free_trig;
>> +
>> + st->trig->ops = &trigger_ops;
>> + iio_trigger_set_drvdata(st->trig, indio_dev);
>> + ret = iio_trigger_register(st->trig);
>> + if (ret)
>> + goto error_free_irq;
>> +
>> + indio_dev->trig = iio_trigger_get(st->trig);
>> +
>> + return 0;
>> +
>> +error_free_irq:
>> + free_irq(irq, st->trig);
>> +error_free_trig:
>> + iio_trigger_free(st->trig);
>> +
>> + return ret;
>> +}
>> +
>> +static void remove_trigger(struct iio_dev *indio_dev, int irq)
>> +{
>> + struct trigger_data *st = iio_priv(indio_dev);
>> +
>> + iio_trigger_unregister(st->trig);
>> + free_irq(irq, st->trig);
>> + iio_trigger_free(st->trig);
>> +}
>> +
>> +struct iio_dev *mgb4_trigger_create(struct mgb4_dev *mgbdev)
>> +{
>> + struct iio_dev *indio_dev;
>> + struct trigger_data *data;
>> + struct pci_dev *pdev = mgbdev->pdev;
>> + struct device *dev = &pdev->dev;
>> + int rv, irq;
>> +
>> + indio_dev = iio_device_alloc(dev, sizeof(*data));
>> + if (!indio_dev)
>> + return NULL;
>> +
>> + indio_dev->info = &trigger_info;
>> + indio_dev->name = "mgb4";
>> + indio_dev->modes = INDIO_DIRECT_MODE;
>> + indio_dev->channels = trigger_channels;
>> + indio_dev->num_channels = ARRAY_SIZE(trigger_channels);
>> +
>> + data = iio_priv(indio_dev);
>> + data->mgbdev = mgbdev;
>> +
>> + irq = xdma_get_user_irq(mgbdev->xdev, 11);
>> + rv = probe_trigger(indio_dev, irq);
>> + if (rv < 0) {
>> + dev_err(dev, "iio triggered setup failed\n");
>> + goto error_alloc;
>> + }
>> + rv = iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
>> + trigger_handler, NULL);
>> + if (rv < 0) {
>> + dev_err(dev, "iio triggered buffer setup failed\n");
>> + goto error_trigger;
>> + }
>> + rv = iio_device_register(indio_dev);
>> + if (rv < 0) {
>> + dev_err(dev, "iio device register failed\n");
>> + goto error_buffer;
>> + }
>> +
>> + return indio_dev;
>> +
>> +error_buffer:
>> + iio_triggered_buffer_cleanup(indio_dev);
>> +error_trigger:
>> + remove_trigger(indio_dev, irq);
>> +error_alloc:
>> + iio_device_free(indio_dev);
>> +
>> + return NULL;
>> +}
>> +
>> +void mgb4_trigger_free(struct iio_dev *indio_dev)
>> +{
>> + struct trigger_data *st = iio_priv(indio_dev);
>> +
>> + iio_device_unregister(indio_dev);
>> + iio_triggered_buffer_cleanup(indio_dev);
>> + remove_trigger(indio_dev, xdma_get_user_irq(st->mgbdev->xdev, 11));
>> + iio_device_free(indio_dev);
>> +}
>> diff --git a/drivers/media/pci/mgb4/mgb4_trigger.h b/drivers/media/pci/mgb4/mgb4_trigger.h
>> new file mode 100644
>> index 000000000000..9e6a651817d5
>> --- /dev/null
>> +++ b/drivers/media/pci/mgb4/mgb4_trigger.h
>> @@ -0,0 +1,8 @@
>> +/* SPDX-License-Identifier: GPL-2.0-only */
>> +/*
>> + * Copyright (C) 2021-2022 Digiteq Automotive
>> + * author: Martin Tuma <martin.tuma@...iteqautomotive.com>
>> + */
>> +
>> +extern struct iio_dev *mgb4_trigger_create(struct mgb4_dev *mgbdev);
>> +extern void mgb4_trigger_free(struct iio_dev *indio_dev);
>> diff --git a/drivers/media/pci/mgb4/mgb4_vin.c b/drivers/media/pci/mgb4/mgb4_vin.c
>> new file mode 100644
>> index 000000000000..82aa656d21ea
>> --- /dev/null
>> +++ b/drivers/media/pci/mgb4/mgb4_vin.c
>> @@ -0,0 +1,665 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (C) 2021-2022 Digiteq Automotive
>> + * author: Martin Tuma <martin.tuma@...iteqautomotive.com>
>> + */
>> +
>> +#include <linux/pci.h>
>> +#include <linux/workqueue.h>
>> +#include <media/v4l2-ioctl.h>
>> +#include <media/videobuf2-v4l2.h>
>> +#include <media/videobuf2-dma-sg.h>
>> +#include <linux/dma/amd_xdma.h>
>> +#include "mgb4_core.h"
>> +#include "mgb4_dma.h"
>> +#include "mgb4_sysfs.h"
>> +#include "mgb4_io.h"
>> +#include "mgb4_vout.h"
>> +#include "mgb4_vin.h"
>> +
>> +static const struct mgb4_vin_config vin_cfg[] = {
>> + {0, 0, 0, 6, {0x10, 0x00, 0x04, 0x08, 0x1C, 0x14, 0x18, 0x20, 0x24, 0x28}},
>> + {1, 1, 1, 7, {0x40, 0x30, 0x34, 0x38, 0x4C, 0x44, 0x48, 0x50, 0x54, 0x58}}
>> +};
>> +
>> +static const struct i2c_board_info fpdl3_deser_info[] = {
>> + {I2C_BOARD_INFO("deserializer1", 0x36)},
>> + {I2C_BOARD_INFO("deserializer2", 0x38)},
>> +};
>> +static const struct i2c_board_info gmsl_deser_info[] = {
>> + {I2C_BOARD_INFO("deserializer1", 0x4C)},
>> + {I2C_BOARD_INFO("deserializer2", 0x2A)},
>> +};
>> +
>> +static const struct mgb4_i2c_kv fpdl3_i2c[] = {
>> + {0x06, 0xFF, 0x04}, {0x07, 0xFF, 0x01}, {0x45, 0xFF, 0xE8},
>> + {0x49, 0xFF, 0x00}, {0x34, 0xFF, 0x00}, {0x23, 0xFF, 0x00}
>> +};
>> +
>> +static const struct mgb4_i2c_kv gmsl_i2c[] = {
>> + {0x01, 0x03, 0x03}, {0x300, 0x0C, 0x0C}, {0x03, 0xC0, 0xC0},
>> + {0x1CE, 0x0E, 0x0E}, {0x11, 0x05, 0x00}, {0x05, 0xC0, 0x40},
>> + {0x307, 0x0F, 0x00}, {0xA0, 0x03, 0x00}, {0x3E0, 0x07, 0x07},
>> + {0x308, 0x01, 0x01}, {0x10, 0x20, 0x20}, {0x300, 0x40, 0x40}
>> +};
>> +
>> +
>> +static struct mgb4_vout_dev *loopback_dev(struct mgb4_vin_dev *vindev, int i)
>> +{
>> + struct mgb4_vout_dev *voutdev;
>> + u32 config;
>> +
>> + voutdev = vindev->mgbdev->vout[i];
>> + if (!voutdev)
>> + return NULL;
>> +
>> + config = mgb4_read_reg(&voutdev->mgbdev->video, voutdev->config->regs.config);
>> + if ((config & 0xc) >> 2 == vindev->config->id)
>> + return voutdev;
>> +
>> + return NULL;
>> +}
>> +
>> +static int loopback_active(struct mgb4_vin_dev *vindev)
>> +{
>> + int i;
>> +
>> + for (i = 0; i < MGB4_VOUT_DEVICES; i++)
>> + if (loopback_dev(vindev, i))
>> + return 1;
>> +
>> + return 0;
>> +}
>> +
>> +static void set_loopback_padding(struct mgb4_vin_dev *vindev, u32 padding)
>> +{
>> + struct mgb4_regs *video = &vindev->mgbdev->video;
>> + struct mgb4_vout_dev *voutdev;
>> + int i;
>> +
>> + for (i = 0; i < MGB4_VOUT_DEVICES; i++) {
>> + voutdev = loopback_dev(vindev, i);
>> + if (voutdev)
>> + mgb4_write_reg(video, voutdev->config->regs.padding, padding);
>> + }
>> +}
>> +
>> +static void return_all_buffers(struct mgb4_vin_dev *vindev,
>> + enum vb2_buffer_state state)
>> +{
>> + struct frame_buffer *buf, *node;
>> + unsigned long flags;
>> +
>> + spin_lock_irqsave(&vindev->qlock, flags);
>> + list_for_each_entry_safe(buf, node, &vindev->buf_list, list) {
>> + vb2_buffer_done(&buf->vb.vb2_buf, state);
>> + list_del(&buf->list);
>> + }
>> + spin_unlock_irqrestore(&vindev->qlock, flags);
>> +}
>> +
>> +static int queue_setup(struct vb2_queue *q, unsigned int *nbuffers,
>> + unsigned int *nplanes, unsigned int sizes[],
>> + struct device *alloc_devs[])
>> +{
>> + struct mgb4_vin_dev *vindev = vb2_get_drv_priv(q);
>> + unsigned int size = BYTESPERLINE(vindev->width, vindev->alignment)
>> + * vindev->height;
>> +
>> + if (*nbuffers < 2)
>> + *nbuffers = 2;
>> +
>> + if (*nplanes)
>> + return sizes[0] < size ? -EINVAL : 0;
>> + *nplanes = 1;
>> + sizes[0] = size;
>> +
>> + return 0;
>> +}
>> +
>> +static int buffer_init(struct vb2_buffer *vb)
>> +{
>> + struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
>> + struct frame_buffer *buf = to_frame_buffer(vbuf);
>> +
>> + INIT_LIST_HEAD(&buf->list);
>> +
>> + return 0;
>> +}
>> +
>> +static int buffer_prepare(struct vb2_buffer *vb)
>> +{
>> + struct mgb4_vin_dev *vindev = vb2_get_drv_priv(vb->vb2_queue);
>> + struct device *dev = &vindev->mgbdev->pdev->dev;
>> + unsigned int size = BYTESPERLINE(vindev->width, vindev->alignment)
>> + * vindev->height;
>> +
>> + if (vb2_plane_size(vb, 0) < size) {
>> + dev_err(dev, "buffer too small (%lu < %u)\n",
>> + vb2_plane_size(vb, 0), size);
>> + return -EINVAL;
>> + }
>> +
>> + vb2_set_plane_payload(vb, 0, size);
>> +
>> + return 0;
>> +}
>> +
>> +static void buffer_queue(struct vb2_buffer *vb)
>> +{
>> + struct mgb4_vin_dev *vindev = vb2_get_drv_priv(vb->vb2_queue);
>> + struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
>> + struct frame_buffer *buf = to_frame_buffer(vbuf);
>> + unsigned long flags;
>> +
>> + spin_lock_irqsave(&vindev->qlock, flags);
>> + list_add_tail(&buf->list, &vindev->buf_list);
>> + spin_unlock_irqrestore(&vindev->qlock, flags);
>> +}
>> +
>> +static void stop_streaming(struct vb2_queue *vq)
>> +{
>> + struct mgb4_vin_dev *vindev = vb2_get_drv_priv(vq);
>> + int irq = xdma_get_user_irq(vindev->mgbdev->xdev, vindev->config->vin_irq);
>> +
>> + xdma_disable_user_irq(vindev->mgbdev->xdev, irq);
>> +
>> + if (!loopback_active(vindev))
>> + mgb4_mask_reg(&vindev->mgbdev->video, vindev->config->regs.config,
>> + 0x2, 0x0);
>> +
>> + cancel_work_sync(&vindev->dma_work);
>> + return_all_buffers(vindev, VB2_BUF_STATE_ERROR);
>> +}
>> +
>> +static int start_streaming(struct vb2_queue *vq, unsigned int count)
>> +{
>> + struct mgb4_vin_dev *vindev = vb2_get_drv_priv(vq);
>> + u32 resolution = mgb4_read_reg(&vindev->mgbdev->video,
>> + vindev->config->regs.resolution);
>> + int irq = xdma_get_user_irq(vindev->mgbdev->xdev, vindev->config->vin_irq);
>> +
>> + if ((vindev->width != (resolution >> 16))
>> + || (vindev->height != (resolution & 0xFFFF))) {
>> + return_all_buffers(vindev, VB2_BUF_STATE_ERROR);
>
> If start_streaming fails, then all buffers need to be returned to STATE_QUEUED,
> not STATE_ERROR.
>
Ok.
>> + return -EIO;
>> + }
>> +
>> + vindev->sequence = 0;
>> +
>> + if (!loopback_active(vindev))
>> + mgb4_mask_reg(&vindev->mgbdev->video, vindev->config->regs.config,
>> + 0x2, 0x2);
>> +
>> + xdma_enable_user_irq(vindev->mgbdev->xdev, irq);
>> +
>> + return 0;
>> +}
>> +
>> +static const struct vb2_ops queue_ops = {
>> + .queue_setup = queue_setup,
>> + .buf_init = buffer_init,
>> + .buf_prepare = buffer_prepare,
>> + .buf_queue = buffer_queue,
>> + .start_streaming = start_streaming,
>> + .stop_streaming = stop_streaming,
>> + .wait_prepare = vb2_ops_wait_prepare,
>> + .wait_finish = vb2_ops_wait_finish
>> +};
>> +
>> +static int fh_open(struct file *file)
>> +{
>> + struct mgb4_vin_dev *vindev = video_drvdata(file);
>> + struct mgb4_regs *video = &vindev->mgbdev->video;
>> + u32 resolution, padding;
>> + int ret, irq;
>> +
>> + ret = v4l2_fh_open(file);
>> + if (ret)
>> + return ret;
>> +
>> + resolution = mgb4_read_reg(video, vindev->config->regs.resolution);
>> + if (resolution >= ERR_NO_REG)
>> + goto error;
>> +
>> + vindev->width = resolution >> 16;
>> + vindev->height = resolution & 0xFFFF;
>> + if (!vindev->width || !vindev->height)
>> + goto error;
>> +
>> + irq = xdma_get_user_irq(vindev->mgbdev->xdev, vindev->config->err_irq);
>> + xdma_enable_user_irq(vindev->mgbdev->xdev, irq);
>> +
>> + vindev->period = mgb4_read_reg(video, vindev->config->regs.frame_period);
>> +
>> + padding = PADDING(vindev->width, vindev->alignment);
>> + mgb4_write_reg(video, vindev->config->regs.padding, padding);
>> + set_loopback_padding(vindev, padding);
>
> This doesn't look right. Just opening a video device shouldn't cause
> any state changes, and that's what it looks is happening here.
>
> I.e., if I just want to query the device (v4l2-ctl --all), then that
> shouldn't not change anything.
>
The MGB4 card is quiet special in this case. Unlike in "normal" cameras,
the video signal may change over time as the user can connect different
video sources to the card. This is why I set up some video signal
related stuff in the open() call. When you open the device, you
"configure" it for the current video signal and the signal is then
expected not to change until the device is closed (such change will not
break the driver, but will break the image). Additionally, the open()
call must fail, when there is no signal connected to the card.
If you have some suggestions how to handle this "dynamic" behaviour in a
different way (properly?) then I'm open to them. But the fact, that even
the video resolution can change at any arbitrary time will IMHO always
lead to some "workarounds" like this one in the open() call.
>> +
>> + return 0;
>> +
>> +error:
>> + v4l2_fh_release(file);
>> + return -EIO;
>> +}
>> +
>> +static int fh_release(struct file *file)
>> +{
>> + struct mgb4_vin_dev *vindev = video_drvdata(file);
>> + struct mgb4_regs *video = &vindev->mgbdev->video;
>> + int irq = xdma_get_user_irq(vindev->mgbdev->xdev, vindev->config->err_irq);
>> +
>> + xdma_disable_user_irq(vindev->mgbdev->xdev, irq);
>> +
>> + mgb4_write_reg(video, vindev->config->regs.padding, 0);
>> + set_loopback_padding(vindev, 0);
>> +
>> + return vb2_fop_release(file);
>> +}
>
> This looks wrong too: if I am streaming video, then in another shell
> I call 'v4l2-ctl -D' then when v4l2-ctl closes the video device this will disable
> the user irq, presumably stopping the video streaming.
>
Maybe there is some "is_streaming()" check missing. I will rethink the
open/close logic. There may be some better solution, but due to the
"dynamic" video signal, there will IMHO still be some constrains...
>> +
>> +static const struct v4l2_file_operations video_fops = {
>> + .owner = THIS_MODULE,
>> + .open = fh_open,
>> + .release = fh_release,
>> + .unlocked_ioctl = video_ioctl2,
>> + .read = vb2_fop_read,
>> + .mmap = vb2_fop_mmap,
>> + .poll = vb2_fop_poll,
>> +};
>> +
>> +static int vidioc_querycap(struct file *file, void *priv,
>> + struct v4l2_capability *cap)
>> +{
>> + struct mgb4_vin_dev *vindev = video_drvdata(file);
>> +
>> + strscpy(cap->driver, KBUILD_MODNAME, sizeof(cap->driver));
>> + strscpy(cap->card, "MGB4 PCIe Card", sizeof(cap->card));
>> + snprintf(cap->bus_info, sizeof(cap->bus_info), "PCI:%s",
>> + pci_name(vindev->mgbdev->pdev));
>
> No need to set bus_info, recently the v4l2-core added support for
> that. See v4l_querycap in v4l2-ioctl.c.
>
Ok.
>> +
>> + return 0;
>> +}
>> +
>> +static int vidioc_enum_fmt(struct file *file, void *priv,
>> + struct v4l2_fmtdesc *f)
>> +{
>> + if (f->index != 0)
>> + return -EINVAL;
>> +
>> + f->pixelformat = V4L2_PIX_FMT_ABGR32;
>> +
>> + return 0;
>> +}
>> +
>> +static int vidioc_enum_frameintervals(struct file *file, void *priv,
>> + struct v4l2_frmivalenum *ival)
>> +{
>> + struct mgb4_vin_dev *vindev = video_drvdata(file);
>> +
>> + if (ival->index != 0)
>> + return -EINVAL;
>> + if (ival->pixel_format != V4L2_PIX_FMT_ABGR32)
>> + return -EINVAL;
>> + if (ival->width != vindev->width || ival->height != vindev->height)
>> + return -EINVAL;
>> +
>> + ival->type = V4L2_FRMIVAL_TYPE_DISCRETE;
>> + ival->discrete.numerator = vindev->period;
>> + ival->discrete.denominator = 125000000;
>> +
>> + return 0;
>> +}
>> +
>> +static int vidioc_fmt(struct file *file, void *priv, struct v4l2_format *f)
>> +{
>> + struct mgb4_vin_dev *vindev = video_drvdata(file);
>> +
>> + f->fmt.pix.pixelformat = V4L2_PIX_FMT_ABGR32;
>> + f->fmt.pix.width = vindev->width;
>> + f->fmt.pix.height = vindev->height;
>> + f->fmt.pix.field = V4L2_FIELD_NONE;
>> + f->fmt.pix.colorspace = V4L2_COLORSPACE_RAW;
>> + f->fmt.pix.bytesperline = BYTESPERLINE(vindev->width, vindev->alignment);
>> + f->fmt.pix.sizeimage = f->fmt.pix.bytesperline * f->fmt.pix.height;
>> +
>> + return 0;
>> +}
>> +
>> +static int vidioc_enum_input(struct file *file, void *priv,
>> + struct v4l2_input *i)
>> +{
>> + if (i->index != 0)
>> + return -EINVAL;
>> +
>> + i->type = V4L2_INPUT_TYPE_CAMERA;
>> + strscpy(i->name, "MGB4", sizeof(i->name));
>> +
>> + return 0;
>> +}
>> +
>> +static int vidioc_enum_framesizes(struct file *file, void *fh,
>> + struct v4l2_frmsizeenum *fsize)
>> +{
>> + struct mgb4_vin_dev *vindev = video_drvdata(file);
>> +
>> + if (fsize->index != 0 || fsize->pixel_format != V4L2_PIX_FMT_ABGR32)
>> + return -EINVAL;
>> +
>> + fsize->discrete.width = vindev->width;
>> + fsize->discrete.height = vindev->height;
>> + fsize->type = V4L2_FRMSIZE_TYPE_DISCRETE;
>> +
>> + return 0;
>> +}
>> +
>> +static int vidioc_s_input(struct file *file, void *priv, unsigned int i)
>> +{
>> + return (i == 0) ? 0 : -EINVAL;
>> +}
>> +
>> +static int vidioc_g_input(struct file *file, void *priv, unsigned int *i)
>> +{
>> + *i = 0;
>> + return 0;
>> +}
>> +
>> +static int vidioc_queryctrl(struct file *file, void *priv,
>> + struct v4l2_queryctrl *qc)
>> +{
>> + return -EINVAL;
>> +}
>
> Huh? Why is this needed?
>
I think this was required to "silence" some v4l2-compliance tool
warnings/errors. I will recheck this.
>> +
>> +static int vidioc_parm(struct file *file, void *priv,
>> + struct v4l2_streamparm *parm)
>> +{
>> + struct mgb4_vin_dev *vindev = video_drvdata(file);
>> + struct v4l2_fract timeperframe = {
>> + .numerator = vindev->period,
>> + .denominator = 125000000,
>> + };
>> +
>> + if (parm->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
>> + return -EINVAL;
>> +
>> + parm->parm.capture.readbuffers = 2;
>> + parm->parm.capture.capability = V4L2_CAP_TIMEPERFRAME;
>> + parm->parm.capture.timeperframe = timeperframe;
>> +
>> + return 0;
>> +}
>> +
>> +static const struct v4l2_ioctl_ops video_ioctl_ops = {
>> + .vidioc_querycap = vidioc_querycap,
>> + .vidioc_enum_fmt_vid_cap = vidioc_enum_fmt,
>> + .vidioc_try_fmt_vid_cap = vidioc_fmt,
>> + .vidioc_s_fmt_vid_cap = vidioc_fmt,
>> + .vidioc_g_fmt_vid_cap = vidioc_fmt,
>> + .vidioc_enum_framesizes = vidioc_enum_framesizes,
>> + .vidioc_enum_frameintervals = vidioc_enum_frameintervals,
>> + .vidioc_enum_input = vidioc_enum_input,
>> + .vidioc_g_input = vidioc_g_input,
>> + .vidioc_s_input = vidioc_s_input,
>> + .vidioc_queryctrl = vidioc_queryctrl,
>> + .vidioc_reqbufs = vb2_ioctl_reqbufs,
>> + .vidioc_create_bufs = vb2_ioctl_create_bufs,
>> + .vidioc_querybuf = vb2_ioctl_querybuf,
>> + .vidioc_qbuf = vb2_ioctl_qbuf,
>> + .vidioc_dqbuf = vb2_ioctl_dqbuf,
>
> I'm missing vidioc_prepare_buf.
>
Ok, will add it.
>> + .vidioc_expbuf = vb2_ioctl_expbuf,
>> + .vidioc_streamon = vb2_ioctl_streamon,
>> + .vidioc_streamoff = vb2_ioctl_streamoff,
>> + .vidioc_g_parm = vidioc_parm,
>> + .vidioc_s_parm = vidioc_parm
>> +};
>> +
>> +static void dma_transfer(struct work_struct *work)
>> +{
>> + struct mgb4_vin_dev *vindev = container_of(work, struct mgb4_vin_dev, dma_work);
>> + struct device *dev = &vindev->mgbdev->pdev->dev;
>> + struct frame_buffer *buf = 0;
>> + unsigned long flags;
>> + u32 addr;
>> +
>> +
>> + spin_lock_irqsave(&vindev->qlock, flags);
>> + if (!list_empty(&vindev->buf_list)) {
>> + buf = list_first_entry(&vindev->buf_list, struct frame_buffer, list);
>> + list_del_init(vindev->buf_list.next);
>> + }
>> + spin_unlock_irqrestore(&vindev->qlock, flags);
>> +
>> + if (!buf)
>> + return;
>> +
>> +
>> + addr = mgb4_read_reg(&vindev->mgbdev->video, vindev->config->regs.address);
>> + if (addr >= ERR_QUEUE_FULL) {
>> + dev_warn(dev, "frame queue error (%d)\n", (int)addr);
>> + vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
>> + return;
>> + }
>> +
>> + if (mgb4_dma_transfer(vindev->mgbdev, vindev->config->dma_channel,
>> + false, addr, vb2_dma_sg_plane_desc(&buf->vb.vb2_buf, 0)) < 0) {
>> + dev_warn(dev, "DMA transfer error\n");
>> + vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
>> + } else {
>> + buf->vb.vb2_buf.timestamp = ktime_get_ns();
>> + buf->vb.sequence = vindev->sequence++;
>> + buf->vb.field = V4L2_FIELD_NONE;
>> + vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_DONE);
>> + }
>> +}
>> +
>> +static irqreturn_t vin_handler(int irq, void *ctx)
>> +{
>> + struct mgb4_vin_dev *vindev = (struct mgb4_vin_dev *)ctx;
>> +
>> + schedule_work(&vindev->dma_work);
>> +
>> + mgb4_write_reg(&vindev->mgbdev->video, 0xB4, 1U<<vindev->config->vin_irq);
>> +
>> + return IRQ_HANDLED;
>> +}
>> +
>> +static irqreturn_t err_handler(int irq, void *ctx)
>> +{
>> + struct mgb4_vin_dev *vindev = (struct mgb4_vin_dev *)ctx;
>> + struct device *dev = &vindev->mgbdev->pdev->dev;
>> + struct vb2_queue *vq = &(vindev->queue);
>> +
>> + u32 resolution = mgb4_read_reg(&vindev->mgbdev->video,
>> + vindev->config->regs.resolution);
>> +
>> + if ((vindev->width != (resolution >> 16))
>> + || (vindev->height != (resolution & 0xFFFF))) {
>> + dev_warn(dev, "stream changed (%ux%u -> %ux%u)\n",
>> + vindev->width, vindev->height, resolution>>16,
>> + resolution & 0xFFFF);
>> +
>> + if (vb2_is_streaming(vq)) {
>> + return_all_buffers(vindev, VB2_BUF_STATE_ERROR);
>> + vb2_queue_error(vq);
>> + }
>> + }
>> +
>> + mgb4_write_reg(&vindev->mgbdev->video, 0xB4, 1U<<vindev->config->err_irq);
>> +
>> + return IRQ_HANDLED;
>> +}
>> +
>> +static int deser_init(struct mgb4_vin_dev *vindev, int id)
>> +{
>> + int rv, addr_size;
>> + size_t values_count;
>> + const struct mgb4_i2c_kv *values;
>> + const struct i2c_board_info *info;
>> + struct device *dev = &vindev->mgbdev->pdev->dev;
>> +
>> +
>> + if (MGB4_IS_GMSL(vindev->mgbdev)) {
>> + info = &gmsl_deser_info[id];
>> + addr_size = 16;
>> + values = gmsl_i2c;
>> + values_count = ARRAY_SIZE(gmsl_i2c);
>> + } else {
>> + info = &fpdl3_deser_info[id];
>> + addr_size = 8;
>> + values = fpdl3_i2c;
>> + values_count = ARRAY_SIZE(fpdl3_i2c);
>> + }
>> +
>> + rv = mgb4_i2c_init(&vindev->deser, vindev->mgbdev->i2c_adap, info, addr_size);
>> + if (rv < 0) {
>> + dev_err(dev, "failed to create deserializer\n");
>> + return rv;
>> + }
>> + rv = mgb4_i2c_configure(&vindev->deser, values, values_count);
>> + if (rv < 0) {
>> + dev_err(dev, "failed to configure deserializer\n");
>> + goto err_i2c_dev;
>> + }
>> +
>> + return 0;
>> +
>> +err_i2c_dev:
>> + mgb4_i2c_free(&vindev->deser);
>> +
>> + return rv;
>> +}
>> +
>> +struct mgb4_vin_dev *mgb4_vin_create(struct mgb4_dev *mgbdev, int id)
>> +{
>> + int rv;
>> + struct device_attribute **attr, **module_attr;
>> + struct mgb4_vin_dev *vindev;
>> + struct pci_dev *pdev = mgbdev->pdev;
>> + struct device *dev = &pdev->dev;
>> + int vin_irq, err_irq;
>> +
>> + vindev = kzalloc(sizeof(struct mgb4_vin_dev), GFP_KERNEL);
>> + if (!vindev)
>> + return NULL;
>> +
>> + vindev->mgbdev = mgbdev;
>> + vindev->config = &(vin_cfg[id]);
>> +
>> + /* Frame queue*/
>> + INIT_LIST_HEAD(&vindev->buf_list);
>> + spin_lock_init(&vindev->qlock);
>> +
>> + /* DMA transfer stuff */
>> + INIT_WORK(&vindev->dma_work, dma_transfer);
>> +
>> + /* IRQ callback */
>> + vin_irq = xdma_get_user_irq(mgbdev->xdev, vindev->config->vin_irq);
>> + rv = request_irq(vin_irq, vin_handler, 0, "mgb4-vin", vindev);
>> + if (rv) {
>> + dev_err(dev, "failed to register vin irq handler\n");
>> + goto err_alloc;
>> + }
>> + /* Error IRQ callback */
>> + err_irq = xdma_get_user_irq(mgbdev->xdev, vindev->config->err_irq);
>> + rv = request_irq(err_irq, err_handler, 0, "mgb4-err", vindev);
>> + if (rv) {
>> + dev_err(dev, "failed to register err irq handler\n");
>> + goto err_vin_irq;
>> + }
>> +
>> + /* V4L2 */
>> + rv = v4l2_device_register(dev, &vindev->v4l2dev);
>> + if (rv) {
>> + dev_err(dev, "failed to register v4l2 device\n");
>> + goto err_err_irq;
>> + }
>> +
>> + mutex_init(&vindev->lock);
>> +
>> + vindev->queue.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
>> + vindev->queue.io_modes = VB2_MMAP | VB2_USERPTR | VB2_DMABUF | VB2_READ;
>
> Please drop USERPTR: it's not something modern drivers should enable.
Ok.
>
>> + vindev->queue.buf_struct_size = sizeof(struct frame_buffer);
>> + vindev->queue.ops = &queue_ops;
>> + vindev->queue.mem_ops = &vb2_dma_sg_memops;
>> + vindev->queue.gfp_flags = GFP_DMA32;
>
> Is the DMA indeed only 32 bits? It's a bit unexpected.
>
The addresses used by the card are 32b. But maybe this is not what this
constraint means and it can be removed. I will check this.
>> + vindev->queue.timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
>> + vindev->queue.min_buffers_needed = 2;
>> + vindev->queue.drv_priv = vindev;
>> + vindev->queue.lock = &vindev->lock;
>> + vindev->queue.dev = dev;
>> + rv = vb2_queue_init(&vindev->queue);
>> + if (rv) {
>> + dev_err(dev, "failed to initialize vb2 queue\n");
>> + goto err_v4l2_dev;
>> + }
>> +
>> + snprintf(vindev->vdev.name, sizeof(vindev->vdev.name), "mgb4-in%d", id+1);
>> + vindev->vdev.device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE
>> + | V4L2_CAP_STREAMING;
>> + vindev->vdev.fops = &video_fops;
>> + vindev->vdev.ioctl_ops = &video_ioctl_ops;
>> + vindev->vdev.release = video_device_release_empty;
>> + vindev->vdev.v4l2_dev = &vindev->v4l2dev;
>> + vindev->vdev.lock = &vindev->lock;
>> + vindev->vdev.queue = &vindev->queue;
>> + video_set_drvdata(&vindev->vdev, vindev);
>> +
>> + rv = video_register_device(&vindev->vdev, VFL_TYPE_GRABBER, -1);
>> + if (rv) {
>> + dev_err(dev, "failed to register video device\n");
>> + goto err_v4l2_dev;
>> + }
>> +
>> + /* Deserializer */
>> + rv = deser_init(vindev, id);
>> + if (rv)
>> + goto err_video_dev;
>> +
>> + /* Set FPGA regs to comply with the deserializer state */
>> + mgb4_mask_reg(&vindev->mgbdev->video, vindev->config->regs.config,
>> + 1U<<9, 1U<<9);
>> +
>> + /* Module sysfs attributes */
>> + vindev->alignment = 1;
>> + module_attr = MGB4_IS_GMSL(mgbdev)
>> + ? mgb4_gmsl_in_attrs : mgb4_fpdl3_in_attrs;
>> + for (attr = module_attr; *attr; attr++)
>> + device_create_file(&vindev->vdev.dev, *attr);
>> +
>> + return vindev;
>> +
>> +err_video_dev:
>> + video_unregister_device(&vindev->vdev);
>> +err_v4l2_dev:
>> + v4l2_device_unregister(&vindev->v4l2dev);
>> +err_err_irq:
>> + free_irq(err_irq, vindev);
>> +err_vin_irq:
>> + free_irq(vin_irq, vindev);
>> +err_alloc:
>> + kfree(vindev);
>> +
>> + return NULL;
>> +}
>> +
>> +void mgb4_vin_free(struct mgb4_vin_dev *vindev)
>> +{
>> + struct device_attribute **attr, **module_attr;
>> + int vin_irq = xdma_get_user_irq(vindev->mgbdev->xdev,
>> + vindev->config->vin_irq);
>> + int err_irq = xdma_get_user_irq(vindev->mgbdev->xdev,
>> + vindev->config->err_irq);
>> +
>> + free_irq(vin_irq, vindev);
>> + free_irq(err_irq, vindev);
>> +
>> + module_attr = MGB4_IS_GMSL(vindev->mgbdev)
>> + ? mgb4_gmsl_in_attrs : mgb4_fpdl3_in_attrs;
>> + for (attr = module_attr; *attr; attr++)
>> + device_remove_file(&vindev->vdev.dev, *attr);
>> +
>> + mgb4_i2c_free(&vindev->deser);
>> + video_unregister_device(&vindev->vdev);
>> + v4l2_device_unregister(&vindev->v4l2dev);
>> +
>> + kfree(vindev);
>> +}
>> diff --git a/drivers/media/pci/mgb4/mgb4_vin.h b/drivers/media/pci/mgb4/mgb4_vin.h
>> new file mode 100644
>> index 000000000000..4b01b61c3f90
>> --- /dev/null
>> +++ b/drivers/media/pci/mgb4/mgb4_vin.h
>> @@ -0,0 +1,64 @@
>> +/* SPDX-License-Identifier: GPL-2.0-only */
>> +/*
>> + * Copyright (C) 2021-2022 Digiteq Automotive
>> + * author: Martin Tuma <martin.tuma@...iteqautomotive.com>
>> + */
>> +
>> +#ifndef __MGB4_VIN_H__
>> +#define __MGB4_VIN_H__
>> +
>> +#include <media/v4l2-device.h>
>> +#include <media/v4l2-dev.h>
>> +#include <media/v4l2-ctrls.h>
>> +#include <media/videobuf2-core.h>
>> +#include "mgb4_i2c.h"
>> +
>> +struct mgb4_vin_regs {
>> + u32 address;
>> + u32 config;
>> + u32 status;
>> + u32 resolution;
>> + u32 frame_period;
>> + u32 sync;
>> + u32 pclk;
>> + u32 signal;
>> + u32 signal2;
>> + u32 padding;
>> +};
>> +
>> +struct mgb4_vin_config {
>> + int id;
>> + int dma_channel;
>> + int vin_irq;
>> + int err_irq;
>> + struct mgb4_vin_regs regs;
>> +};
>> +
>> +struct mgb4_vin_dev {
>> + struct mgb4_dev *mgbdev;
>> + struct v4l2_device v4l2dev;
>> + struct video_device vdev;
>> + struct vb2_queue queue;
>> + struct mutex lock;
>> +
>> + spinlock_t qlock;
>> + struct list_head buf_list;
>> + struct work_struct dma_work;
>> +
>> + unsigned int sequence;
>> +
>> + u32 width;
>> + u32 height;
>> + u32 period;
>> + u32 freq_range;
>> + u32 alignment;
>> +
>> + struct mgb4_i2c_client deser;
>> +
>> + const struct mgb4_vin_config *config;
>> +};
>> +
>> +extern struct mgb4_vin_dev *mgb4_vin_create(struct mgb4_dev *mgbdev, int id);
>> +extern void mgb4_vin_free(struct mgb4_vin_dev *vindev);
>> +
>> +#endif
>> diff --git a/drivers/media/pci/mgb4/mgb4_vout.c b/drivers/media/pci/mgb4/mgb4_vout.c
>> new file mode 100644
>> index 000000000000..542ff059c67f
>> --- /dev/null
>> +++ b/drivers/media/pci/mgb4/mgb4_vout.c
>> @@ -0,0 +1,507 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (C) 2021-2022 Digiteq Automotive
>> + * author: Martin Tuma <martin.tuma@...iteqautomotive.com>
>> + */
>> +
>> +#include <linux/pci.h>
>> +#include <media/v4l2-ioctl.h>
>> +#include <media/videobuf2-v4l2.h>
>> +#include <media/videobuf2-dma-sg.h>
>> +#include <linux/dma/amd_xdma.h>
>> +#include "mgb4_core.h"
>> +#include "mgb4_dma.h"
>> +#include "mgb4_sysfs.h"
>> +#include "mgb4_io.h"
>> +#include "mgb4_vout.h"
>> +
>> +#define DEFAULT_WIDTH 1280
>> +#define DEFAULT_HEIGHT 640
>> +#define DEFAULT_PERIOD (125000000 / 60)
>> +
>> +static const struct mgb4_vout_config vout_cfg[] = {
>> + {0, 0, 8, {0x78, 0x60, 0x64, 0x68, 0x74, 0x6C, 0x70, 0x7c}},
>> + {1, 1, 9, {0x98, 0x80, 0x84, 0x88, 0x94, 0x8c, 0x90, 0x9c}}
>> +};
>> +
>> +static const struct i2c_board_info fpdl3_ser_info[] = {
>> + {I2C_BOARD_INFO("serializer1", 0x14)},
>> + {I2C_BOARD_INFO("serializer2", 0x16)},
>> +};
>> +
>> +static const struct mgb4_i2c_kv fpdl3_i2c[] = {
>> + {0x05, 0xFF, 0x04}, {0x06, 0xFF, 0x01}, {0xC2, 0xFF, 0x80}
>> +};
>> +
>> +static int queue_setup(struct vb2_queue *q, unsigned int *nbuffers,
>> + unsigned int *nplanes, unsigned int sizes[],
>> + struct device *alloc_devs[])
>> +{
>> + struct mgb4_vout_dev *voutdev = vb2_get_drv_priv(q);
>> + unsigned long size = BYTESPERLINE(voutdev->width, voutdev->alignment)
>> + * voutdev->height;
>> +
>> + if (*nbuffers < 2)
>> + *nbuffers = 2;
>> +
>> + if (*nplanes)
>> + return sizes[0] < size ? -EINVAL : 0;
>> + *nplanes = 1;
>> + sizes[0] = size;
>> +
>> + return 0;
>> +}
>> +
>> +static int buffer_init(struct vb2_buffer *vb)
>> +{
>> + struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
>> + struct frame_buffer *buf = to_frame_buffer(vbuf);
>> +
>> + INIT_LIST_HEAD(&buf->list);
>> +
>> + return 0;
>> +}
>> +
>> +static int buffer_prepare(struct vb2_buffer *vb)
>> +{
>> + struct mgb4_vout_dev *voutdev = vb2_get_drv_priv(vb->vb2_queue);
>> + struct device *dev = &voutdev->mgbdev->pdev->dev;
>> + unsigned long size = BYTESPERLINE(voutdev->width, voutdev->alignment)
>> + * voutdev->height;
>> +
>> + if (vb2_plane_size(vb, 0) < size) {
>> + dev_err(dev, "buffer too small (%lu < %lu)\n",
>> + vb2_plane_size(vb, 0), size);
>> + return -EINVAL;
>> + }
>> +
>> + vb2_set_plane_payload(vb, 0, size);
>> +
>> + return 0;
>> +}
>> +
>> +static void buffer_queue(struct vb2_buffer *vb)
>> +{
>> + struct mgb4_vout_dev *vindev = vb2_get_drv_priv(vb->vb2_queue);
>> + struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
>> + struct frame_buffer *buf = to_frame_buffer(vbuf);
>> + unsigned long flags;
>> +
>> + spin_lock_irqsave(&vindev->qlock, flags);
>> + list_add_tail(&buf->list, &vindev->buf_list);
>> + spin_unlock_irqrestore(&vindev->qlock, flags);
>> +}
>> +
>> +static void stop_streaming(struct vb2_queue *vq)
>> +{
>> + struct mgb4_vout_dev *voutdev = vb2_get_drv_priv(vq);
>> + struct frame_buffer *buf, *node;
>> + int irq = xdma_get_user_irq(voutdev->mgbdev->xdev, voutdev->config->irq);
>> + unsigned long flags;
>> +
>> + xdma_disable_user_irq(voutdev->mgbdev->xdev, irq);
>> +
>> + cancel_work_sync(&voutdev->dma_work);
>> +
>> + mgb4_mask_reg(&voutdev->mgbdev->video, voutdev->config->regs.config,
>> + 0x2, 0x0);
>> +
>> + spin_lock_irqsave(&voutdev->qlock, flags);
>> + list_for_each_entry_safe(buf, node, &voutdev->buf_list, list) {
>> + vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
>> + list_del(&buf->list);
>> + }
>> + spin_unlock_irqrestore(&voutdev->qlock, flags);
>> +}
>> +
>> +static int start_streaming(struct vb2_queue *vq, unsigned int count)
>> +{
>> + struct mgb4_vout_dev *voutdev = vb2_get_drv_priv(vq);
>> + struct device *dev = &voutdev->mgbdev->pdev->dev;
>> + struct frame_buffer *buf = 0;
>> + struct mgb4_regs *video = &voutdev->mgbdev->video;
>> + int irq = xdma_get_user_irq(voutdev->mgbdev->xdev, voutdev->config->irq);
>> + u32 addr;
>> +
>> + mgb4_mask_reg(video, voutdev->config->regs.config, 0x2, 0x2);
>> +
>> + addr = mgb4_read_reg(video, voutdev->config->regs.address);
>> + if (addr >= ERR_QUEUE_FULL) {
>> + dev_err(dev, "frame queue error (%d)\n", (int)addr);
>
> You must return queued buffers with STATE_QUEUED on error in start_streaming().
> Same as for the capture devices.
>
Ok.
>> + return -EIO;
>> + }
>> +
>> + if (!list_empty(&voutdev->buf_list)) {
>> + buf = list_first_entry(&voutdev->buf_list, struct frame_buffer, list);
>> + list_del_init(voutdev->buf_list.next);
>> + }
>> + if (!buf) {
>> + dev_err(dev, "empty v4l2 queue\n");
>
> You can set min_buffers_needed to 1 if you need at least one buffer before
> start_streaming should be called.
It is set to 2.
>
>> + return -EIO;
>> + }
>> +
>> + if (mgb4_dma_transfer(voutdev->mgbdev, voutdev->config->dma_channel,
>> + true, addr, vb2_dma_sg_plane_desc(&buf->vb.vb2_buf, 0)) < 0) {
>> + dev_warn(dev, "DMA transfer error\n");
>> + vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
>> + } else {
>> + vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_DONE);
>> + }
>> +
>> + xdma_enable_user_irq(voutdev->mgbdev->xdev, irq);
>> +
>> + return 0;
>> +}
>> +
>> +static const struct vb2_ops queue_ops = {
>> + .queue_setup = queue_setup,
>> + .buf_init = buffer_init,
>> + .buf_prepare = buffer_prepare,
>> + .buf_queue = buffer_queue,
>> + .start_streaming = start_streaming,
>> + .stop_streaming = stop_streaming,
>> + .wait_prepare = vb2_ops_wait_prepare,
>> + .wait_finish = vb2_ops_wait_finish
>> +};
>> +
>> +
>> +static int vidioc_querycap(struct file *file, void *priv,
>> + struct v4l2_capability *cap)
>> +{
>> + struct mgb4_vout_dev *voutdev = video_drvdata(file);
>> +
>> + strscpy(cap->driver, KBUILD_MODNAME, sizeof(cap->driver));
>> + strscpy(cap->card, "MGB4 PCIe Card", sizeof(cap->card));
>> + snprintf(cap->bus_info, sizeof(cap->bus_info), "PCI:%s",
>> + pci_name(voutdev->mgbdev->pdev));
>
> Can be dropped.
>
Ok.
>> +
>> + return 0;
>> +}
>> +
>> +
>> +static int vidioc_enum_fmt(struct file *file, void *priv,
>> + struct v4l2_fmtdesc *f)
>> +{
>> + if (f->index != 0)
>> + return -EINVAL;
>> +
>> + f->pixelformat = V4L2_PIX_FMT_ABGR32;
>> +
>> + return 0;
>> +}
>> +
>> +static int vidioc_fmt(struct file *file, void *priv, struct v4l2_format *f)
>> +{
>> + struct mgb4_vout_dev *voutdev = video_drvdata(file);
>> +
>> + f->fmt.pix.pixelformat = V4L2_PIX_FMT_ABGR32;
>> + f->fmt.pix.width = voutdev->width;
>> + f->fmt.pix.height = voutdev->height;
>> + f->fmt.pix.field = V4L2_FIELD_NONE;
>> + f->fmt.pix.colorspace = V4L2_COLORSPACE_RAW;
>> + f->fmt.pix.bytesperline = BYTESPERLINE(voutdev->width, voutdev->alignment);
>> + f->fmt.pix.sizeimage = f->fmt.pix.width * 4 * f->fmt.pix.height;
>> +
>> + return 0;
>> +}
>> +
>> +static int vidioc_g_output(struct file *file, void *priv, unsigned int *i)
>> +{
>> + *i = 0;
>> + return 0;
>> +}
>> +
>> +static int vidioc_s_output(struct file *file, void *priv, unsigned int i)
>> +{
>> + return i ? -EINVAL : 0;
>> +}
>> +
>> +static int vidioc_enum_output(struct file *file, void *priv, struct v4l2_output *out)
>> +{
>> + if (out->index != 0)
>> + return -EINVAL;
>> +
>> + out->type = V4L2_OUTPUT_TYPE_ANALOG;
>> + strscpy(out->name, "MGB4", sizeof(out->name));
>> +
>> + return 0;
>> +}
>> +
>> +static int vidioc_queryctrl(struct file *file, void *priv,
>> + struct v4l2_queryctrl *qc)
>> +{
>> + return -EINVAL;
>> +}
>
> Huh?
>
This is the same story as in the INPUT case.
>> +
>> +static const struct v4l2_ioctl_ops video_ioctl_ops = {
>> + .vidioc_querycap = vidioc_querycap,
>> + .vidioc_enum_fmt_vid_out = vidioc_enum_fmt,
>> + .vidioc_try_fmt_vid_out = vidioc_fmt,
>> + .vidioc_s_fmt_vid_out = vidioc_fmt,
>> + .vidioc_g_fmt_vid_out = vidioc_fmt,
>> + .vidioc_enum_output = vidioc_enum_output,
>> + .vidioc_g_output = vidioc_g_output,
>> + .vidioc_s_output = vidioc_s_output,
>> + .vidioc_queryctrl = vidioc_queryctrl,
>> + .vidioc_reqbufs = vb2_ioctl_reqbufs,
>> + .vidioc_create_bufs = vb2_ioctl_create_bufs,
>> + .vidioc_querybuf = vb2_ioctl_querybuf,
>> + .vidioc_qbuf = vb2_ioctl_qbuf,
>> + .vidioc_dqbuf = vb2_ioctl_dqbuf,
>
> Missing vidioc_prepare_buf.
>
>> + .vidioc_expbuf = vb2_ioctl_expbuf,
>> + .vidioc_streamon = vb2_ioctl_streamon,
>> + .vidioc_streamoff = vb2_ioctl_streamoff,
>> +};
>> +
>> +static int fh_open(struct file *file)
>> +{
>> + struct mgb4_vout_dev *voutdev = video_drvdata(file);
>> + struct mgb4_regs *video = &voutdev->mgbdev->video;
>> + u32 config, resolution;
>> + int ret;
>> +
>> + ret = v4l2_fh_open(file);
>> + if (ret)
>> + return ret;
>> +
>> + config = mgb4_read_reg(video, voutdev->config->regs.config);
>> + if ((config & 0xc) >> 2 != voutdev->config->id + MGB4_VIN_DEVICES)
>> + goto error;
>> +
>> + resolution = mgb4_read_reg(video, voutdev->config->regs.resolution);
>> + voutdev->width = resolution >> 16;
>> + voutdev->height = resolution & 0xFFFF;
>> +
>> + mgb4_write_reg(video, voutdev->config->regs.padding,
>> + PADDING(voutdev->width, voutdev->alignment));
>
> Same as for input: opening a video device appears to have a side-effect.
>
The same reason as in the input case. You can have different displays
with completely different video signals (even resolutions) connected to
the output at any arbitrary time.
>> +
>> + return 0;
>> +
>> +error:
>> + v4l2_fh_release(file);
>> + return -EBUSY;
>> +}
>> +
>> +static const struct v4l2_file_operations video_fops = {
>> + .owner = THIS_MODULE,
>> + .open = fh_open,
>> + .release = vb2_fop_release,
>> + .unlocked_ioctl = video_ioctl2,
>> + .write = vb2_fop_write,
>> + .mmap = vb2_fop_mmap,
>> + .poll = vb2_fop_poll,
>> +};
>> +
>> +static void dma_transfer(struct work_struct *work)
>> +{
>> + struct mgb4_vout_dev *voutdev = container_of(work, struct mgb4_vout_dev,
>> + dma_work);
>> + struct device *dev = &voutdev->mgbdev->pdev->dev;
>> + struct frame_buffer *buf = 0;
>> + unsigned long flags;
>> + u32 addr;
>> +
>> + spin_lock_irqsave(&voutdev->qlock, flags);
>> + if (!list_empty(&voutdev->buf_list)) {
>> + buf = list_first_entry(&voutdev->buf_list, struct frame_buffer, list);
>> + list_del_init(voutdev->buf_list.next);
>> + }
>> + spin_unlock_irqrestore(&voutdev->qlock, flags);
>> +
>> + if (!buf)
>> + return;
>> +
>> + addr = mgb4_read_reg(&voutdev->mgbdev->video, voutdev->config->regs.address);
>> + if (addr >= ERR_QUEUE_FULL) {
>> + dev_warn(dev, "frame queue error (%d)\n", (int)addr);
>> + vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
>> + return;
>> + }
>> +
>> + if (mgb4_dma_transfer(voutdev->mgbdev, voutdev->config->dma_channel,
>> + true, addr, vb2_dma_sg_plane_desc(&buf->vb.vb2_buf, 0)) < 0) {
>> + dev_warn(dev, "DMA transfer error\n");
>> + vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
>> + } else {
>> + vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_DONE);
>> + }
>> +}
>> +
>> +static irqreturn_t handler(int irq, void *ctx)
>> +{
>> + struct mgb4_vout_dev *voutdev = (struct mgb4_vout_dev *)ctx;
>> +
>> + schedule_work(&voutdev->dma_work);
>> +
>> + mgb4_write_reg(&voutdev->mgbdev->video, 0xB4, 1U<<voutdev->config->irq);
>> +
>> + return IRQ_HANDLED;
>> +}
>> +
>> +static int ser_init(struct mgb4_vout_dev *voutdev, int id)
>> +{
>> + int rv, addr_size;
>> + size_t values_count;
>> + const struct mgb4_i2c_kv *values;
>> + const struct i2c_board_info *info;
>> + struct device *dev = &voutdev->mgbdev->pdev->dev;
>> +
>> +
>> + if (MGB4_IS_GMSL(voutdev->mgbdev))
>> + return 0;
>> +
>> + info = &fpdl3_ser_info[id];
>> + addr_size = 8;
>> + values = fpdl3_i2c;
>> + values_count = ARRAY_SIZE(fpdl3_i2c);
>> +
>> + rv = mgb4_i2c_init(&voutdev->ser, voutdev->mgbdev->i2c_adap, info, addr_size);
>> + if (rv < 0) {
>> + dev_err(dev, "failed to create serializer\n");
>> + return rv;
>> + }
>> + rv = mgb4_i2c_configure(&voutdev->ser, values, values_count);
>> + if (rv < 0) {
>> + dev_err(dev, "failed to configure serializer\n");
>> + goto err_i2c_dev;
>> + }
>> +
>> + return 0;
>> +
>> +err_i2c_dev:
>> + mgb4_i2c_free(&voutdev->ser);
>> +
>> + return rv;
>> +}
>> +
>> +struct mgb4_vout_dev *mgb4_vout_create(struct mgb4_dev *mgbdev, int id)
>> +{
>> + int rv, irq;
>> + struct device_attribute **attr, **module_attr;
>> + struct mgb4_vout_dev *voutdev;
>> + struct mgb4_regs *video;
>> + struct pci_dev *pdev = mgbdev->pdev;
>> + struct device *dev = &pdev->dev;
>> +
>> + voutdev = kzalloc(sizeof(struct mgb4_vout_dev), GFP_KERNEL);
>> + if (!voutdev)
>> + return NULL;
>> +
>> + voutdev->mgbdev = mgbdev;
>> + voutdev->config = &(vout_cfg[id]);
>> + video = &voutdev->mgbdev->video;
>> +
>> + /* Frame queue*/
>> + INIT_LIST_HEAD(&voutdev->buf_list);
>> + spin_lock_init(&voutdev->qlock);
>> +
>> + /* DMA transfer stuff */
>> + INIT_WORK(&voutdev->dma_work, dma_transfer);
>> +
>> + /* IRQ callback */
>> + irq = xdma_get_user_irq(mgbdev->xdev, voutdev->config->irq);
>> + rv = request_irq(irq, handler, 0, "mgb4-vout", voutdev);
>> + if (rv) {
>> + dev_err(dev, "failed to register irq handler\n");
>> + goto err_alloc;
>> + }
>> +
>> + /* V4L2 */
>> + rv = v4l2_device_register(dev, &voutdev->v4l2dev);
>> + if (rv) {
>> + dev_err(dev, "failed to register v4l2 device\n");
>> + goto err_irq;
>> + }
>> +
>> + mutex_init(&voutdev->lock);
>> +
>> + voutdev->queue.type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
>> + voutdev->queue.io_modes = VB2_MMAP | VB2_USERPTR | VB2_DMABUF | VB2_WRITE;
>
> Drop USERPTR.
>
Ok.
> General note (both for video capture and output): while it does doesn't hurt to
> support read() or write(), it is unusual in modern drivers, and since read/write
> support involves a memcpy for each buffer, it is also quite inefficient.
>
> You might want to drop support for that.
>
I would let it there as I have seen code using it...
>> + voutdev->queue.buf_struct_size = sizeof(struct frame_buffer);
>> + voutdev->queue.ops = &queue_ops;
>> + voutdev->queue.mem_ops = &vb2_dma_sg_memops;
>> + voutdev->queue.gfp_flags = GFP_DMA32;
>> + voutdev->queue.timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
>> + voutdev->queue.min_buffers_needed = 2;
>
> Ah, you set this already. Then the check in start_streaming of whether there
> is a buffer queued can be dropped.
Ok.
>
>> + voutdev->queue.drv_priv = voutdev;
>> + voutdev->queue.lock = &voutdev->lock;
>> + voutdev->queue.dev = dev;
>> + rv = vb2_queue_init(&voutdev->queue);
>> + if (rv) {
>> + dev_err(dev, "failed to initialize vb2 queue\n");
>> + goto err_v4l2_dev;
>> + }
>> +
>> + snprintf(voutdev->vdev.name, sizeof(voutdev->vdev.name), "mgb4-out%d", id+1);
>> + voutdev->vdev.device_caps = V4L2_CAP_VIDEO_OUTPUT | V4L2_CAP_READWRITE
>> + | V4L2_CAP_STREAMING;
>> + voutdev->vdev.vfl_dir = VFL_DIR_TX;
>> + voutdev->vdev.fops = &video_fops;
>> + voutdev->vdev.ioctl_ops = &video_ioctl_ops;
>> + voutdev->vdev.release = video_device_release_empty;
>> + voutdev->vdev.v4l2_dev = &voutdev->v4l2dev;
>> + voutdev->vdev.lock = &voutdev->lock;
>> + voutdev->vdev.queue = &voutdev->queue;
>> + video_set_drvdata(&voutdev->vdev, voutdev);
>> +
>> + rv = video_register_device(&voutdev->vdev, VFL_TYPE_GRABBER, -1);
>> + if (rv) {
>> + dev_err(dev, "failed to register video device\n");
>> + goto err_v4l2_dev;
>> + }
>> +
>> + /* Serializer */
>> + rv = ser_init(voutdev, id);
>> + if (rv)
>> + goto err_video_dev;
>> +
>> + /* Set the FPGA registers default values */
>> + mgb4_mask_reg(video, voutdev->config->regs.config, 0xc,
>> + (voutdev->config->id + MGB4_VIN_DEVICES) << 2);
>> + mgb4_write_reg(video, voutdev->config->regs.resolution,
>> + (DEFAULT_WIDTH << 16) | DEFAULT_HEIGHT);
>> + mgb4_write_reg(video, voutdev->config->regs.frame_period,
>> + DEFAULT_PERIOD);
>> +
>> + /* Module sysfs attributes */
>> + voutdev->alignment = 1;
>> + module_attr = MGB4_IS_GMSL(mgbdev)
>> + ? mgb4_gmsl_out_attrs : mgb4_fpdl3_out_attrs;
>> + for (attr = module_attr; *attr; attr++)
>> + device_create_file(&voutdev->vdev.dev, *attr);
>> +
>> + /* Set the output frequency according to the FPGA defaults */
>> + voutdev->freq = 70000;
>> +
>> + return voutdev;
>> +
>> +err_video_dev:
>> + video_unregister_device(&voutdev->vdev);
>> +err_v4l2_dev:
>> + v4l2_device_unregister(&voutdev->v4l2dev);
>> +err_irq:
>> + free_irq(irq, voutdev);
>> +err_alloc:
>> + kfree(voutdev);
>> +
>> + return NULL;
>> +}
>> +
>> +void mgb4_vout_free(struct mgb4_vout_dev *voutdev)
>> +{
>> + struct device_attribute **attr, **module_attr;
>> + int irq = xdma_get_user_irq(voutdev->mgbdev->xdev, voutdev->config->irq);
>> +
>> + free_irq(irq, voutdev);
>> +
>> + module_attr = MGB4_IS_GMSL(voutdev->mgbdev)
>> + ? mgb4_gmsl_out_attrs : mgb4_fpdl3_out_attrs;
>> + for (attr = module_attr; *attr; attr++)
>> + device_remove_file(&voutdev->vdev.dev, *attr);
>> +
>> + mgb4_i2c_free(&voutdev->ser);
>> + video_unregister_device(&voutdev->vdev);
>> + v4l2_device_unregister(&voutdev->v4l2dev);
>> +
>> + kfree(voutdev);
>> +}
>> diff --git a/drivers/media/pci/mgb4/mgb4_vout.h b/drivers/media/pci/mgb4/mgb4_vout.h
>> new file mode 100644
>> index 000000000000..902b6b8deb21
>> --- /dev/null
>> +++ b/drivers/media/pci/mgb4/mgb4_vout.h
>> @@ -0,0 +1,58 @@
>> +/* SPDX-License-Identifier: GPL-2.0-only */
>> +/*
>> + * Copyright (C) 2021-2022 Digiteq Automotive
>> + * author: Martin Tuma <martin.tuma@...iteqautomotive.com>
>> + */
>> +
>> +#ifndef __MGB4_VOUT_H__
>> +#define __MGB4_VOUT_H__
>> +
>> +#include <media/v4l2-device.h>
>> +#include <media/v4l2-dev.h>
>> +#include <media/v4l2-ctrls.h>
>> +#include <media/videobuf2-core.h>
>> +#include "mgb4_i2c.h"
>> +
>> +struct mgb4_vout_regs {
>> + u32 address;
>> + u32 config;
>> + u32 status;
>> + u32 resolution;
>> + u32 frame_period;
>> + u32 hsync;
>> + u32 vsync;
>> + u32 padding;
>> +};
>> +
>> +struct mgb4_vout_config {
>> + int id;
>> + int dma_channel;
>> + int irq;
>> + struct mgb4_vout_regs regs;
>> +};
>> +
>> +struct mgb4_vout_dev {
>> + struct mgb4_dev *mgbdev;
>> + struct v4l2_device v4l2dev;
>> + struct video_device vdev;
>> + struct vb2_queue queue;
>> + struct mutex lock;
>> +
>> + spinlock_t qlock;
>> + struct list_head buf_list;
>> + struct work_struct dma_work;
>> +
>> + u32 width;
>> + u32 height;
>> + u32 freq;
>> + u32 alignment;
>> +
>> + struct mgb4_i2c_client ser;
>> +
>> + const struct mgb4_vout_config *config;
>> +};
>> +
>> +extern struct mgb4_vout_dev *mgb4_vout_create(struct mgb4_dev *mgbdev, int id);
>> +extern void mgb4_vout_free(struct mgb4_vout_dev *voutdev);
>> +
>> +#endif
>
> General note: add some comments at the top of each source explaining what
> it does.
>
I will do that, but except of the CMT module (where even I do not know
what exactly it does ;-) ) it should be clear from the source name. But
maybe in some cases some info that is clear to me can help to others.
> Regards,
>
> Hans
Thanks's for your time to review the driver. I will prepare a v4 soon
with the changes. Except the open/close logic it does not look as much
work to me at the moment.
M.
Powered by blists - more mailing lists