linux-kernel - Re: [PATCH v2 2/3] arm: dts: nuvoton: npcm7xx: add sgpio node

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <f2feffc1-2845-662b-b0ad-8f75e74edc03@linaro.org>
Date:   Tue, 8 Nov 2022 16:24:00 +0100
From:   Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To:     Jim Liu <jim.t90615@...il.com>, JJLIU0@...oton.com,
        KWLIU@...oton.com, linus.walleij@...aro.org, brgl@...ev.pl,
        robh+dt@...nel.org, krzysztof.kozlowski+dt@...aro.org
Cc:     devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, openbmc@...ts.ozlabs.org
Subject: Re: [PATCH v2 2/3] arm: dts: nuvoton: npcm7xx: add sgpio node

On 08/11/2022 10:28, Jim Liu wrote:
> Add the SGPIO controller to the NPCM750 devicetree
> 
> Signed-off-by: Jim Liu <JJLIU0@...oton.com>
> ---
> Changes for v2:
>    - modify dts node 
> ---
>  arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi | 30 +++++++++++++++++++
>  1 file changed, 30 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi b/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi
> index c7b5ef15b716..9cac60734b57 100644
> --- a/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi
> +++ b/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi
> @@ -330,6 +330,36 @@
>  				status = "disabled";
>  			};
>  
> +			sgpio1: sgpio@...000 {

Node names should be generic.
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation

> +				compatible = "nuvoton,npcm750-sgpio";
> +				reg = <0x101000 0x200>;
> +				clocks = <&clk NPCM7XX_CLK_APB3>;
> +				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
> +				bus-frequency = <16000000>;
> +				gpio-controller;
> +				#gpio-cells = <2>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&iox1_pins>;
> +				nin_gpios = <64>;
> +				nout_gpios = <64>;
> +				status = "disabled";

Why? What is missing from external resources?

> +			};
> +
> +			sgpio2: sgpio@...000 {

Node names should be generic.
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation

> +				compatible = "nuvoton,npcm750-sgpio";
> +				reg = <0x102000 0x200>;
> +				clocks = <&clk NPCM7XX_CLK_APB3>;
> +				interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
> +				bus-frequency = <16000000>;
> +				gpio-controller;
> +				#gpio-cells = <2>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&iox2_pins>;
> +				nin_gpios = <64>;
> +				nout_gpios = <64>;
> +				status = "disabled";

Why? What is missing from external resources?


Best regards,
Krzysztof