lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Fri, 11 Nov 2022 16:01:15 +0100
From:   Lorenzo Pieralisi <lpieralisi@...nel.org>
To:     Dmitry Torokhov <dmitry.torokhov@...il.com>
Cc:     Shawn Guo <shawn.guo@...aro.org>,
        Thomas Petazzoni <thomas.petazzoni@...tlin.com>,
        Pali Rohár <pali@...nel.org>,
        Bjorn Helgaas <bhelgaas@...gle.com>,
        Rob Herring <robh@...nel.org>,
        Krzysztof Wilczyński <kw@...ux.com>,
        Linus Walleij <linus.walleij@...aro.org>,
        Bartosz Golaszewski <brgl@...ev.pl>, linux-pci@...r.kernel.org,
        linux-kernel@...r.kernel.org
Subject: Re: [PATCH 1/2] PCI: histb: switch to using gpiod API

On Tue, Sep 06, 2022 at 01:43:00PM -0700, Dmitry Torokhov wrote:
> This patch switches the driver away from legacy gpio/of_gpio API to
> gpiod API, and removes use of of_get_named_gpio_flags() which I want to
> make private to gpiolib.
> 
> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@...il.com>

Should I pick this up ? On patch (2/2) I am not sure we reached
a consensus - please let me know.

Thanks,
Lorenzo

> ---
>  drivers/pci/controller/dwc/pcie-histb.c | 39 ++++++++++++-------------
>  1 file changed, 19 insertions(+), 20 deletions(-)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-histb.c b/drivers/pci/controller/dwc/pcie-histb.c
> index e2b80f10030d..43c27812dd6d 100644
> --- a/drivers/pci/controller/dwc/pcie-histb.c
> +++ b/drivers/pci/controller/dwc/pcie-histb.c
> @@ -10,11 +10,11 @@
>  
>  #include <linux/clk.h>
>  #include <linux/delay.h>
> +#include <linux/gpio/consumer.h>
>  #include <linux/interrupt.h>
>  #include <linux/kernel.h>
>  #include <linux/module.h>
>  #include <linux/of.h>
> -#include <linux/of_gpio.h>
>  #include <linux/pci.h>
>  #include <linux/phy/phy.h>
>  #include <linux/platform_device.h>
> @@ -60,7 +60,7 @@ struct histb_pcie {
>  	struct reset_control *sys_reset;
>  	struct reset_control *bus_reset;
>  	void __iomem *ctrl;
> -	int reset_gpio;
> +	struct gpio_desc *reset_gpio;
>  	struct regulator *vpcie;
>  };
>  
> @@ -212,8 +212,8 @@ static void histb_pcie_host_disable(struct histb_pcie *hipcie)
>  	clk_disable_unprepare(hipcie->sys_clk);
>  	clk_disable_unprepare(hipcie->bus_clk);
>  
> -	if (gpio_is_valid(hipcie->reset_gpio))
> -		gpio_set_value_cansleep(hipcie->reset_gpio, 0);
> +	if (hipcie->reset_gpio)
> +		gpiod_set_value_cansleep(hipcie->reset_gpio, 1);
>  
>  	if (hipcie->vpcie)
>  		regulator_disable(hipcie->vpcie);
> @@ -235,8 +235,8 @@ static int histb_pcie_host_enable(struct dw_pcie_rp *pp)
>  		}
>  	}
>  
> -	if (gpio_is_valid(hipcie->reset_gpio))
> -		gpio_set_value_cansleep(hipcie->reset_gpio, 1);
> +	if (hipcie->reset_gpio)
> +		gpiod_set_value_cansleep(hipcie->reset_gpio, 0);
>  
>  	ret = clk_prepare_enable(hipcie->bus_clk);
>  	if (ret) {
> @@ -298,10 +298,7 @@ static int histb_pcie_probe(struct platform_device *pdev)
>  	struct histb_pcie *hipcie;
>  	struct dw_pcie *pci;
>  	struct dw_pcie_rp *pp;
> -	struct device_node *np = pdev->dev.of_node;
>  	struct device *dev = &pdev->dev;
> -	enum of_gpio_flags of_flags;
> -	unsigned long flag = GPIOF_DIR_OUT;
>  	int ret;
>  
>  	hipcie = devm_kzalloc(dev, sizeof(*hipcie), GFP_KERNEL);
> @@ -336,17 +333,19 @@ static int histb_pcie_probe(struct platform_device *pdev)
>  		hipcie->vpcie = NULL;
>  	}
>  
> -	hipcie->reset_gpio = of_get_named_gpio_flags(np,
> -				"reset-gpios", 0, &of_flags);
> -	if (of_flags & OF_GPIO_ACTIVE_LOW)
> -		flag |= GPIOF_ACTIVE_LOW;
> -	if (gpio_is_valid(hipcie->reset_gpio)) {
> -		ret = devm_gpio_request_one(dev, hipcie->reset_gpio,
> -				flag, "PCIe device power control");
> -		if (ret) {
> -			dev_err(dev, "unable to request gpio\n");
> -			return ret;
> -		}
> +	hipcie->reset_gpio = devm_gpiod_get_optional(dev, "reset",
> +						     GPIOD_OUT_HIGH);
> +	ret = PTR_ERR_OR_ZERO(hipcie->reset_gpio);
> +	if (ret) {
> +		dev_err(dev, "unable to request reset gpio: %d\n", ret);
> +		return ret;
> +	}
> +
> +	ret = gpiod_set_consumer_name(hipcie->reset_gpio,
> +				      "PCIe device power control");
> +	if (ret) {
> +		dev_err(dev, "unable to set reset gpio name: %d\n", ret);
> +		return ret;
>  	}
>  
>  	hipcie->aux_clk = devm_clk_get(dev, "aux");
> -- 
> 2.37.2.789.g6183377224-goog
> 

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ