| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20221115-topic-sm8550-upstream-dts-remoteproc-v1-2-379eec11d841@linaro.org>
Date: Wed, 16 Nov 2022 11:43:11 +0100
From: Neil Armstrong <neil.armstrong@...aro.org>
To: Bjorn Andersson <andersson@...nel.org>,
Andy Gross <agross@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Konrad Dybcio <konrad.dybcio@...ainline.org>
Cc: linux-arm-msm@...r.kernel.org, Abel Vesa <abel.vesa@...aro.org>,
Neil Armstrong <neil.armstrong@...aro.org>,
linux-kernel@...r.kernel.org, devicetree@...r.kernel.org
Subject: [PATCH 2/3] arm64: dts: qcom: sm8550: add adsp, cdsp & mdss support nodes
This adds support for the aDSP, cDSP and MPSS Subsystems found in
the SM8550 SoC.
The aDSP, cDSP and MPSS needs:
- smp2p support nodes to get event back from the subsystems
- remoteproc nodes with glink-edge subnodes providing all needed
resources to start and run the subsystems
In addition, the MPSS Subsystem needs a rmtfs_mem dedicated
memory zone.
Signed-off-by: Neil Armstrong <neil.armstrong@...aro.org>
---
arch/arm64/boot/dts/qcom/sm8550.dtsi | 337 +++++++++++++++++++++++++++++++++++
1 file changed, 337 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
index 9e00778bb600..cac3adc4504f 100644
--- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
@@ -543,6 +543,15 @@ adspslpi_mem: adspslpi-region@...00000 {
/* Linux kernel image is loaded at 0xa8000000 */
+ rmtfs_mem: rmtfs-region@...80000 {
+ compatible = "qcom,rmtfs-mem";
+ reg = <0x0 0xd4a80000 0x0 0x280000>;
+ no-map;
+
+ qcom,client-id = <1>;
+ qcom,vmid = <15>;
+ };
+
mpss_dsm_mem: mpss-dsm-region@...00000 {
compatible = "qcom,mpss-dsm-mem";
reg = <0x0 0xd4d00000 0x0 0x3300000>;
@@ -635,6 +644,89 @@ hyp_ext_reserved_mem: hyp-ext-reserved-region@...00000 {
};
};
+ smp2p-adsp {
+ compatible = "qcom,smp2p";
+ qcom,smem = <443>, <429>;
+ interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+ IPCC_MPROC_SIGNAL_SMP2P
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_LPASS
+ IPCC_MPROC_SIGNAL_SMP2P>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <2>;
+
+ smp2p_adsp_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ smp2p_adsp_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ smp2p-cdsp {
+ compatible = "qcom,smp2p";
+ qcom,smem = <94>, <432>;
+ interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+ IPCC_MPROC_SIGNAL_SMP2P
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_CDSP
+ IPCC_MPROC_SIGNAL_SMP2P>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <5>;
+
+ smp2p_cdsp_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ smp2p_cdsp_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ smp2p-modem {
+ compatible = "qcom,smp2p";
+ qcom,smem = <435>, <428>;
+ interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
+ IPCC_MPROC_SIGNAL_SMP2P
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_MPSS
+ IPCC_MPROC_SIGNAL_SMP2P>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <1>;
+
+ smp2p_modem_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ smp2p_modem_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ ipa_smp2p_out: ipa-ap-to-modem {
+ qcom,entry-name = "ipa";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ ipa_smp2p_in: ipa-modem-to-ap {
+ qcom,entry-name = "ipa";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
soc: soc@0 {
#address-cells = <2>;
#size-cells = <2>;
@@ -1388,6 +1480,48 @@ tcsr: clock-controller@...0000 {
#reset-cells = <1>;
};
+ remoteproc_mpss: remoteproc@...0000 {
+ compatible = "qcom,sm8550-mpss-pas";
+ reg = <0x0 0x04080000 0x0 0x4040>;
+
+ interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_modem_in 7 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready", "handover",
+ "stop-ack", "shutdown-ack";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ power-domains = <&rpmhpd SM8550_CX>,
+ <&rpmhpd SM8550_MSS>;
+ power-domain-names = "cx", "mss";
+
+ interconnects = <&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>;
+
+ memory-region = <&mpss_mem &q6_mpss_dtb_mem>;
+
+ qcom,qmp = <&aoss_qmp>;
+
+ qcom,smem-states = <&smp2p_modem_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
+ IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_MPSS
+ IPCC_MPROC_SIGNAL_GLINK_QMP>;
+ label = "mpss";
+ qcom,remote-pid = <1>;
+ };
+ };
+
lpass_lpiaon_noc: interconnect@...0000 {
compatible = "qcom,sm8550-lpass-lpiaon-noc";
reg = <0x0 0x07400000 0x0 0x19080>;
@@ -2865,12 +2999,215 @@ system-cache-controller@...00000 {
interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
};
+ remoteproc_adsp: remoteproc@...00000 {
+ compatible = "qcom,sm8550-adsp-pas";
+ reg = <0x0 0x30000000 0x0 0x100>;
+
+ interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ power-domains = <&rpmhpd SM8550_LCX>,
+ <&rpmhpd SM8550_LMX>;
+ power-domain-names = "lcx", "lmx";
+
+ interconnects = <&lpass_lpicx_noc MASTER_LPASS_PROC 0 &mc_virt SLAVE_EBI1 0>;
+
+ memory-region = <&adspslpi_mem &q6_adsp_dtb_mem>;
+
+ qcom,qmp = <&aoss_qmp>;
+
+ qcom,smem-states = <&smp2p_adsp_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ remoteproc_adsp_glink: glink-edge {
+ interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+ IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_LPASS
+ IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+ label = "lpass";
+ qcom,remote-pid = <2>;
+
+ fastrpc {
+ compatible = "qcom,fastrpc";
+ qcom,glink-channels = "fastrpcglink-apps-dsp";
+ label = "adsp";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ compute-cb@3 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <3>;
+ iommus = <&apps_smmu 0x1003 0x80>,
+ <&apps_smmu 0x1063 0x0>;
+ };
+
+ compute-cb@4 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <4>;
+ iommus = <&apps_smmu 0x1004 0x80>,
+ <&apps_smmu 0x1064 0x0>;
+ };
+
+ compute-cb@5 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <5>;
+ iommus = <&apps_smmu 0x1005 0x80>,
+ <&apps_smmu 0x1065 0x0>;
+ };
+
+ compute-cb@6 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <6>;
+ iommus = <&apps_smmu 0x1006 0x80>,
+ <&apps_smmu 0x1066 0x0>;
+ };
+
+ compute-cb@7 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <7>;
+ iommus = <&apps_smmu 0x1007 0x80>,
+ <&apps_smmu 0x1067 0x0>;
+ };
+ };
+ };
+ };
+
nsp_noc: interconnect@...c0000 {
compatible = "qcom,sm8550-nsp-noc";
reg = <0x0 0x320C0000 0x0 0xE080>;
#interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
+
+ remoteproc_cdsp: remoteproc@...00000 {
+ compatible = "qcom,sm8550-cdsp-pas";
+ reg = <0x0 0x32300000 0x0 0x1400000>;
+
+ interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ power-domains = <&rpmhpd SM8550_CX>,
+ <&rpmhpd SM8550_MXC>,
+ <&rpmhpd SM8550_NSP>;
+ power-domain-names = "cx", "mxc", "nsp";
+
+ interconnects = <&nsp_noc MASTER_CDSP_PROC 0 &mc_virt SLAVE_EBI1 0>;
+
+ memory-region = <&cdsp_mem &q6_cdsp_dtb_mem>;
+
+ qcom,qmp = <&aoss_qmp>;
+
+ qcom,smem-states = <&smp2p_cdsp_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+ IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_CDSP
+ IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+ label = "cdsp";
+ qcom,remote-pid = <5>;
+
+ fastrpc {
+ compatible = "qcom,fastrpc";
+ qcom,glink-channels = "fastrpcglink-apps-dsp";
+ label = "cdsp";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+
+ compute-cb@1 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <1>;
+ iommus = <&apps_smmu 0x1961 0x0>,
+ <&apps_smmu 0x0c01 0x20>,
+ <&apps_smmu 0x19c1 0x10>;
+ };
+
+ compute-cb@2 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <2>;
+ iommus = <&apps_smmu 0x1962 0x0>,
+ <&apps_smmu 0x0c02 0x20>,
+ <&apps_smmu 0x19c2 0x10>;
+ };
+
+ compute-cb@3 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <3>;
+ iommus = <&apps_smmu 0x1963 0x0>,
+ <&apps_smmu 0x0c03 0x20>,
+ <&apps_smmu 0x19c3 0x10>;
+ };
+
+ compute-cb@4 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <4>;
+ iommus = <&apps_smmu 0x1964 0x0>,
+ <&apps_smmu 0x0c04 0x20>,
+ <&apps_smmu 0x19c4 0x10>;
+ };
+
+ compute-cb@5 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <5>;
+ iommus = <&apps_smmu 0x1965 0x0>,
+ <&apps_smmu 0x0c05 0x20>,
+ <&apps_smmu 0x19c5 0x10>;
+ };
+
+ compute-cb@6 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <6>;
+ iommus = <&apps_smmu 0x1966 0x0>,
+ <&apps_smmu 0x0c06 0x20>,
+ <&apps_smmu 0x19c6 0x10>;
+ };
+
+ compute-cb@7 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <7>;
+ iommus = <&apps_smmu 0x1967 0x0>,
+ <&apps_smmu 0x0c07 0x20>,
+ <&apps_smmu 0x19c7 0x10>;
+ };
+
+ compute-cb@8 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <8>;
+ iommus = <&apps_smmu 0x1968 0x0>,
+ <&apps_smmu 0x0c08 0x20>,
+ <&apps_smmu 0x19c8 0x10>;
+ };
+
+ /* note: secure cb9 in downstream */
+ };
+ };
+ };
};
thermal-zones {
--
b4 0.10.1
Powered by blists - more mailing lists