| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20221121141406.3840561-5-ckeepax@opensource.cirrus.com>
Date: Mon, 21 Nov 2022 14:14:06 +0000
From: Charles Keepax <ckeepax@...nsource.cirrus.com>
To: <vkoul@...nel.org>
CC: <yung-chuan.liao@...ux.intel.com>,
<pierre-louis.bossart@...ux.intel.com>, <sanyog.r.kale@...el.com>,
<alsa-devel@...a-project.org>, <linux-kernel@...r.kernel.org>,
<patches@...nsource.cirrus.com>
Subject: [PATCH v3 4/4] soundwire: stream: Move remaining register accesses over to no_pm
There is no need to play with the runtime reference everytime a register
is accessed. All the remaining "pm" style register accesses trace back
to 4 functions:
sdw_prepare_stream
sdw_deprepare_stream
sdw_enable_stream
sdw_disable_stream
Any sensible implementation will need to hold a runtime reference
across all those functions, it makes no sense to be allowing the
device/bus to suspend whilst streams are being prepared/enabled. And
certainly in the case of the all existing users, they all call these
functions from hw_params/prepare/trigger/hw_free callbacks in ALSA,
which will have already runtime resumed all the audio devices
associated during the open callback.
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@...ux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@...nsource.cirrus.com>
---
No changes since v2.
drivers/soundwire/bus.c | 2 +-
drivers/soundwire/stream.c | 30 +++++++++++++++---------------
2 files changed, 16 insertions(+), 16 deletions(-)
diff --git a/drivers/soundwire/bus.c b/drivers/soundwire/bus.c
index ef4878258afad..d87a188fcce1e 100644
--- a/drivers/soundwire/bus.c
+++ b/drivers/soundwire/bus.c
@@ -1214,7 +1214,7 @@ int sdw_configure_dpn_intr(struct sdw_slave *slave,
val &= ~SDW_DPN_INT_PORT_READY;
}
- ret = sdw_update(slave, addr, (mask | SDW_DPN_INT_PORT_READY), val);
+ ret = sdw_update_no_pm(slave, addr, (mask | SDW_DPN_INT_PORT_READY), val);
if (ret < 0)
dev_err(&slave->dev,
"SDW_DPN_INTMASK write failed:%d\n", val);
diff --git a/drivers/soundwire/stream.c b/drivers/soundwire/stream.c
index bd502368339e5..df3b36670df4c 100644
--- a/drivers/soundwire/stream.c
+++ b/drivers/soundwire/stream.c
@@ -81,14 +81,14 @@ static int _sdw_program_slave_port_params(struct sdw_bus *bus,
}
/* Program DPN_OffsetCtrl2 registers */
- ret = sdw_write(slave, addr1, t_params->offset2);
+ ret = sdw_write_no_pm(slave, addr1, t_params->offset2);
if (ret < 0) {
dev_err(bus->dev, "DPN_OffsetCtrl2 register write failed\n");
return ret;
}
/* Program DPN_BlockCtrl3 register */
- ret = sdw_write(slave, addr2, t_params->blk_pkg_mode);
+ ret = sdw_write_no_pm(slave, addr2, t_params->blk_pkg_mode);
if (ret < 0) {
dev_err(bus->dev, "DPN_BlockCtrl3 register write failed\n");
return ret;
@@ -105,7 +105,7 @@ static int _sdw_program_slave_port_params(struct sdw_bus *bus,
/* Program DPN_SampleCtrl2 register */
wbuf = FIELD_GET(SDW_DPN_SAMPLECTRL_HIGH, t_params->sample_interval - 1);
- ret = sdw_write(slave, addr3, wbuf);
+ ret = sdw_write_no_pm(slave, addr3, wbuf);
if (ret < 0) {
dev_err(bus->dev, "DPN_SampleCtrl2 register write failed\n");
return ret;
@@ -115,7 +115,7 @@ static int _sdw_program_slave_port_params(struct sdw_bus *bus,
wbuf = FIELD_PREP(SDW_DPN_HCTRL_HSTART, t_params->hstart);
wbuf |= FIELD_PREP(SDW_DPN_HCTRL_HSTOP, t_params->hstop);
- ret = sdw_write(slave, addr4, wbuf);
+ ret = sdw_write_no_pm(slave, addr4, wbuf);
if (ret < 0)
dev_err(bus->dev, "DPN_HCtrl register write failed\n");
@@ -163,7 +163,7 @@ static int sdw_program_slave_port_params(struct sdw_bus *bus,
wbuf = FIELD_PREP(SDW_DPN_PORTCTRL_DATAMODE, p_params->data_mode);
wbuf |= FIELD_PREP(SDW_DPN_PORTCTRL_FLOWMODE, p_params->flow_mode);
- ret = sdw_update(s_rt->slave, addr1, 0xF, wbuf);
+ ret = sdw_update_no_pm(s_rt->slave, addr1, 0xF, wbuf);
if (ret < 0) {
dev_err(&s_rt->slave->dev,
"DPN_PortCtrl register write failed for port %d\n",
@@ -173,7 +173,7 @@ static int sdw_program_slave_port_params(struct sdw_bus *bus,
if (!dpn_prop->read_only_wordlength) {
/* Program DPN_BlockCtrl1 register */
- ret = sdw_write(s_rt->slave, addr2, (p_params->bps - 1));
+ ret = sdw_write_no_pm(s_rt->slave, addr2, (p_params->bps - 1));
if (ret < 0) {
dev_err(&s_rt->slave->dev,
"DPN_BlockCtrl1 register write failed for port %d\n",
@@ -184,7 +184,7 @@ static int sdw_program_slave_port_params(struct sdw_bus *bus,
/* Program DPN_SampleCtrl1 register */
wbuf = (t_params->sample_interval - 1) & SDW_DPN_SAMPLECTRL_LOW;
- ret = sdw_write(s_rt->slave, addr3, wbuf);
+ ret = sdw_write_no_pm(s_rt->slave, addr3, wbuf);
if (ret < 0) {
dev_err(&s_rt->slave->dev,
"DPN_SampleCtrl1 register write failed for port %d\n",
@@ -193,7 +193,7 @@ static int sdw_program_slave_port_params(struct sdw_bus *bus,
}
/* Program DPN_OffsetCtrl1 registers */
- ret = sdw_write(s_rt->slave, addr4, t_params->offset1);
+ ret = sdw_write_no_pm(s_rt->slave, addr4, t_params->offset1);
if (ret < 0) {
dev_err(&s_rt->slave->dev,
"DPN_OffsetCtrl1 register write failed for port %d\n",
@@ -203,7 +203,7 @@ static int sdw_program_slave_port_params(struct sdw_bus *bus,
/* Program DPN_BlockCtrl2 register*/
if (t_params->blk_grp_ctrl_valid) {
- ret = sdw_write(s_rt->slave, addr5, t_params->blk_grp_ctrl);
+ ret = sdw_write_no_pm(s_rt->slave, addr5, t_params->blk_grp_ctrl);
if (ret < 0) {
dev_err(&s_rt->slave->dev,
"DPN_BlockCtrl2 reg write failed for port %d\n",
@@ -214,7 +214,7 @@ static int sdw_program_slave_port_params(struct sdw_bus *bus,
/* program DPN_LaneCtrl register */
if (slave_prop->lane_control_support) {
- ret = sdw_write(s_rt->slave, addr6, t_params->lane_ctrl);
+ ret = sdw_write_no_pm(s_rt->slave, addr6, t_params->lane_ctrl);
if (ret < 0) {
dev_err(&s_rt->slave->dev,
"DPN_LaneCtrl register write failed for port %d\n",
@@ -319,9 +319,9 @@ static int sdw_enable_disable_slave_ports(struct sdw_bus *bus,
* it is safe to reset this register
*/
if (en)
- ret = sdw_write(s_rt->slave, addr, p_rt->ch_mask);
+ ret = sdw_write_no_pm(s_rt->slave, addr, p_rt->ch_mask);
else
- ret = sdw_write(s_rt->slave, addr, 0x0);
+ ret = sdw_write_no_pm(s_rt->slave, addr, 0x0);
if (ret < 0)
dev_err(&s_rt->slave->dev,
@@ -476,9 +476,9 @@ static int sdw_prep_deprep_slave_ports(struct sdw_bus *bus,
addr = SDW_DPN_PREPARECTRL(p_rt->num);
if (prep)
- ret = sdw_write(s_rt->slave, addr, p_rt->ch_mask);
+ ret = sdw_write_no_pm(s_rt->slave, addr, p_rt->ch_mask);
else
- ret = sdw_write(s_rt->slave, addr, 0x0);
+ ret = sdw_write_no_pm(s_rt->slave, addr, 0x0);
if (ret < 0) {
dev_err(&s_rt->slave->dev,
@@ -491,7 +491,7 @@ static int sdw_prep_deprep_slave_ports(struct sdw_bus *bus,
wait_for_completion_timeout(port_ready,
msecs_to_jiffies(dpn_prop->ch_prep_timeout));
- val = sdw_read(s_rt->slave, SDW_DPN_PREPARESTATUS(p_rt->num));
+ val = sdw_read_no_pm(s_rt->slave, SDW_DPN_PREPARESTATUS(p_rt->num));
if ((val < 0) || (val & p_rt->ch_mask)) {
ret = (val < 0) ? val : -ETIMEDOUT;
dev_err(&s_rt->slave->dev,
--
2.30.2
Powered by blists - more mailing lists