linux-kernel - [PATCH] serial: tegra: Add missing clk_disable_unprepare() in tegra_uart_hw

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20221125101109.175394-1-yiyang13@huawei.com>
Date:   Fri, 25 Nov 2022 18:11:09 +0800
From:   Yi Yang <yiyang13@...wei.com>
To:     <ldewangan@...dia.com>, <gregkh@...uxfoundation.org>,
        <jirislaby@...nel.org>, <thierry.reding@...il.com>,
        <jonathanh@...dia.com>, <kyarlagadda@...dia.com>,
        <yiyang13@...wei.com>
CC:     <linux-serial@...r.kernel.org>, <linux-tegra@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>
Subject: [PATCH] serial: tegra: Add missing clk_disable_unprepare() in tegra_uart_hw_init()

Add the missing clk_disable_unprepare() before return from
tegra_uart_hw_init() in the error handling path.

Fixes: cc9ca4d95846 ("serial: tegra: Only print FIFO error message when an error occurs")
Fixes: d781ec21bae6 ("serial: tegra: report clk rate errors")
Signed-off-by: Yi Yang <yiyang13@...wei.com>
---
 drivers/tty/serial/serial-tegra.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c
index e5b9773db5e3..abc5039eb273 100644
--- a/drivers/tty/serial/serial-tegra.c
+++ b/drivers/tty/serial/serial-tegra.c
@@ -1046,6 +1046,7 @@ static int tegra_uart_hw_init(struct tegra_uart_port *tup)
 	if (tup->cdata->fifo_mode_enable_status) {
 		ret = tegra_uart_wait_fifo_mode_enabled(tup);
 		if (ret < 0) {
+			clk_disable_unprepare(tup->uart_clk);
 			dev_err(tup->uport.dev,
 				"Failed to enable FIFO mode: %d\n", ret);
 			return ret;
@@ -1067,6 +1068,7 @@ static int tegra_uart_hw_init(struct tegra_uart_port *tup)
 	 */
 	ret = tegra_set_baudrate(tup, TEGRA_UART_DEFAULT_BAUD);
 	if (ret < 0) {
+		clk_disable_unprepare(tup->uart_clk);
 		dev_err(tup->uport.dev, "Failed to set baud rate\n");
 		return ret;
 	}
-- 
2.17.1