lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Message-Id: <20221126191636.6673-1-samuel@sholland.org> Date: Sat, 26 Nov 2022 13:16:36 -0600 From: Samuel Holland <samuel@...lland.org> To: Chen-Yu Tsai <wens@...e.org>, Jernej Skrabec <jernej.skrabec@...il.com>, Linus Walleij <linus.walleij@...aro.org> Cc: Fabien Poussin <fabien.poussin@...il.com>, Samuel Holland <samuel@...lland.org>, linux-arm-kernel@...ts.infradead.org, linux-gpio@...r.kernel.org, linux-kernel@...r.kernel.org, linux-sunxi@...ts.linux.dev Subject: [PATCH] pinctrl: sunxi: d1: Add CAN bus pinmuxes From: Fabien Poussin <fabien.poussin@...il.com> The D1 pin controller contains muxes for two CAN buses. While the CAN bus controllers are only documented for the T113 SoC, the pin controller is the same across all SoC variants. Signed-off-by: Fabien Poussin <fabien.poussin@...il.com> Signed-off-by: Samuel Holland <samuel@...lland.org> --- drivers/pinctrl/sunxi/pinctrl-sun20i-d1.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/pinctrl/sunxi/pinctrl-sun20i-d1.c b/drivers/pinctrl/sunxi/pinctrl-sun20i-d1.c index 40858b881298..9cc94be1046d 100644 --- a/drivers/pinctrl/sunxi/pinctrl-sun20i-d1.c +++ b/drivers/pinctrl/sunxi/pinctrl-sun20i-d1.c @@ -47,6 +47,7 @@ static const struct sunxi_desc_pin d1_pins[] = { SUNXI_FUNCTION(0x5, "i2s2_din"), /* DIN2 */ SUNXI_FUNCTION(0x6, "lcd0"), /* D18 */ SUNXI_FUNCTION(0x7, "uart4"), /* TX */ + SUNXI_FUNCTION(0x8, "can0"), /* TX */ SUNXI_FUNCTION_IRQ_BANK(0xe, 0, 2)), SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 3), SUNXI_FUNCTION(0x0, "gpio_in"), @@ -57,6 +58,7 @@ static const struct sunxi_desc_pin d1_pins[] = { SUNXI_FUNCTION(0x5, "i2s2_din"), /* DIN0 */ SUNXI_FUNCTION(0x6, "lcd0"), /* D19 */ SUNXI_FUNCTION(0x7, "uart4"), /* RX */ + SUNXI_FUNCTION(0x8, "can0"), /* RX */ SUNXI_FUNCTION_IRQ_BANK(0xe, 0, 3)), SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 4), SUNXI_FUNCTION(0x0, "gpio_in"), @@ -67,6 +69,7 @@ static const struct sunxi_desc_pin d1_pins[] = { SUNXI_FUNCTION(0x5, "i2s2_din"), /* DIN1 */ SUNXI_FUNCTION(0x6, "lcd0"), /* D20 */ SUNXI_FUNCTION(0x7, "uart5"), /* TX */ + SUNXI_FUNCTION(0x8, "can1"), /* TX */ SUNXI_FUNCTION_IRQ_BANK(0xe, 0, 4)), SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 5), SUNXI_FUNCTION(0x0, "gpio_in"), @@ -77,6 +80,7 @@ static const struct sunxi_desc_pin d1_pins[] = { SUNXI_FUNCTION(0x5, "pwm0"), SUNXI_FUNCTION(0x6, "lcd0"), /* D21 */ SUNXI_FUNCTION(0x7, "uart5"), /* RX */ + SUNXI_FUNCTION(0x8, "can1"), /* RX */ SUNXI_FUNCTION_IRQ_BANK(0xe, 0, 5)), SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 6), SUNXI_FUNCTION(0x0, "gpio_in"), -- 2.37.4
Powered by blists - more mailing lists