[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <87edtksb20.fsf@baylibre.com>
Date: Wed, 30 Nov 2022 16:43:03 +0100
From: Mattijs Korpershoek <mkorpershoek@...libre.com>
To: "Lin, Meng-Bo" <linmengbo0689@...tonmail.com>,
linux-kernel@...r.kernel.org
Cc: Markuss Broks <markuss.broks@...il.com>,
Dmitry Torokhov <dmitry.torokhov@...il.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Henrik Rydberg <rydberg@...math.org>,
Stephan Gerhold <stephan@...hold.net>,
Nikita Travkin <nikita@...n.ru>, linux-input@...r.kernel.org,
devicetree@...r.kernel.org, ~postmarketos/upstreaming@...ts.sr.ht
Subject: Re: [PATCH v2 3/3] input/touchscreen: imagis: Add supports for
Imagis IST3038
On Fri, Nov 18, 2022 at 18:21, "Lin, Meng-Bo" <linmengbo0689@...tonmail.com> wrote:
> From: Markuss Broks <markuss.broks@...il.com>
>
> Imagis IST3038 is another variant of Imagis IST3038 IC, which has
> a different register interface from IST3038C (possibly firmware defined).
>
> This should also work for IST3044B (though untested), however other
> variants using this interface/protocol(IST3026, IST3032, IST3026B,
> IST3032B) have a different format for coordinates, and they'd need
> additional effort to be supported by this driver.
>
> Signed-off-by: Markuss Broks <markuss.broks@...il.com>
> [Use IST3038C_REG_CHIPID_BASE]
> Signed-off-by: Lin, Meng-Bo <linmengbo0689@...tonmail.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@...libre.com>
> ---
> drivers/input/touchscreen/imagis.c | 62 ++++++++++++++++++++++++------
> 1 file changed, 51 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/input/touchscreen/imagis.c b/drivers/input/touchscreen/imagis.c
> index b667914a44f1..eb3b0684817f 100644
> --- a/drivers/input/touchscreen/imagis.c
> +++ b/drivers/input/touchscreen/imagis.c
> @@ -13,7 +13,8 @@
>
> #define IST3038C_HIB_ACCESS (0x800B << 16)
> #define IST3038C_DIRECT_ACCESS BIT(31)
> -#define IST3038C_REG_CHIPID 0x40001000
> +#define IST3038C_REG_CHIPID_BASE 0x40001000
> +#define IST3038C_REG_CHIPID(base) (base | IST3038C_DIRECT_ACCESS)
> #define IST3038C_REG_HIB_BASE 0x30000100
> #define IST3038C_REG_TOUCH_STATUS (IST3038C_REG_HIB_BASE | IST3038C_HIB_ACCESS)
> #define IST3038C_REG_TOUCH_COORD (IST3038C_REG_HIB_BASE | IST3038C_HIB_ACCESS | 0x8)
> @@ -31,8 +32,24 @@
> #define IST3038C_FINGER_COUNT_SHIFT 12
> #define IST3038C_FINGER_STATUS_MASK GENMASK(9, 0)
>
> +#define IST30XX_REG_STATUS 0x20
> +#define IST30XXB_REG_CHIPID_BASE 0x40000000
> +#define IST30XX_WHOAMI 0x30003000
> +#define IST30XXA_WHOAMI 0x300a300a
> +#define IST30XXB_WHOAMI 0x300b300b
> +#define IST3038_WHOAMI 0x30383038
> +
> +struct imagis_properties {
> + unsigned int interrupt_msg_cmd;
> + unsigned int touch_coord_cmd;
> + unsigned int chipid_base;
> + unsigned int whoami_val;
> + bool protocol_b;
> +};
> +
> struct imagis_ts {
> struct i2c_client *client;
> + const struct imagis_properties *tdata;
> struct input_dev *input_dev;
> struct touchscreen_properties prop;
> struct regulator_bulk_data supplies[2];
> @@ -84,8 +101,7 @@ static irqreturn_t imagis_interrupt(int irq, void *dev_id)
> int i;
> int error;
>
> - error = imagis_i2c_read_reg(ts, IST3038C_REG_INTR_MESSAGE,
> - &intr_message);
> + error = imagis_i2c_read_reg(ts, ts->tdata->interrupt_msg_cmd, &intr_message);
> if (error) {
> dev_err(&ts->client->dev,
> "failed to read the interrupt message: %d\n", error);
> @@ -104,9 +120,13 @@ static irqreturn_t imagis_interrupt(int irq, void *dev_id)
> finger_pressed = intr_message & IST3038C_FINGER_STATUS_MASK;
>
> for (i = 0; i < finger_count; i++) {
> - error = imagis_i2c_read_reg(ts,
> - IST3038C_REG_TOUCH_COORD + (i * 4),
> - &finger_status);
> + if (ts->tdata->protocol_b)
> + error = imagis_i2c_read_reg(ts,
> + ts->tdata->touch_coord_cmd, &finger_status);
> + else
> + error = imagis_i2c_read_reg(ts,
> + ts->tdata->touch_coord_cmd + (i * 4),
> + &finger_status);
> if (error) {
> dev_err(&ts->client->dev,
> "failed to read coordinates for finger %d: %d\n",
> @@ -261,6 +281,12 @@ static int imagis_probe(struct i2c_client *i2c)
>
> ts->client = i2c;
>
> + ts->tdata = device_get_match_data(dev);
> + if (!ts->tdata) {
> + dev_err(dev, "missing chip data\n");
> + return -EINVAL;
> + }
> +
> error = imagis_init_regulators(ts);
> if (error) {
> dev_err(dev, "regulator init error: %d\n", error);
> @@ -279,15 +305,13 @@ static int imagis_probe(struct i2c_client *i2c)
> return error;
> }
>
> - error = imagis_i2c_read_reg(ts,
> - IST3038C_REG_CHIPID | IST3038C_DIRECT_ACCESS,
> - &chip_id);
> + error = imagis_i2c_read_reg(ts, IST3038C_REG_CHIPID(ts->tdata->chipid_base), &chip_id);
> if (error) {
> dev_err(dev, "chip ID read failure: %d\n", error);
> return error;
> }
>
> - if (chip_id != IST3038C_WHOAMI) {
> + if (chip_id != ts->tdata->whoami_val) {
> dev_err(dev, "unknown chip ID: 0x%x\n", chip_id);
> return -EINVAL;
> }
> @@ -343,9 +367,25 @@ static int __maybe_unused imagis_resume(struct device *dev)
>
> static SIMPLE_DEV_PM_OPS(imagis_pm_ops, imagis_suspend, imagis_resume);
>
> +static const struct imagis_properties imagis_3038_data = {
> + .interrupt_msg_cmd = IST30XX_REG_STATUS,
> + .touch_coord_cmd = IST30XX_REG_STATUS,
> + .chipid_base = IST30XXB_REG_CHIPID_BASE,
> + .whoami_val = IST3038_WHOAMI,
> + .protocol_b = true,
> +};
> +
> +static const struct imagis_properties imagis_3038c_data = {
> + .interrupt_msg_cmd = IST3038C_REG_INTR_MESSAGE,
> + .touch_coord_cmd = IST3038C_REG_TOUCH_COORD,
> + .chipid_base = IST3038C_REG_CHIPID_BASE,
> + .whoami_val = IST3038C_WHOAMI,
> +};
> +
> #ifdef CONFIG_OF
> static const struct of_device_id imagis_of_match[] = {
> - { .compatible = "imagis,ist3038c", },
> + { .compatible = "imagis,ist3038", .data = &imagis_3038_data },
> + { .compatible = "imagis,ist3038c", .data = &imagis_3038c_data },
> { },
> };
> MODULE_DEVICE_TABLE(of, imagis_of_match);
> --
> 2.30.2
Powered by blists - more mailing lists