| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20221205060057.GA10297@pengutronix.de>
Date: Mon, 5 Dec 2022 07:00:57 +0100
From: Oleksij Rempel <o.rempel@...gutronix.de>
To: Piergiorgio Beruto <piergiorgio.beruto@...il.com>
Cc: Andrew Lunn <andrew@...n.ch>,
Heiner Kallweit <hkallweit1@...il.com>,
Russell King <linux@...linux.org.uk>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>, linux-kernel@...r.kernel.org,
netdev@...r.kernel.org
Subject: Re: [PATCH v2 net-next 1/4] net/ethtool: add netlink interface for
the PLCA RS
Hi Beruto,
On Mon, Dec 05, 2022 at 02:41:35AM +0100, Piergiorgio Beruto wrote:
> Add support for configuring the PLCA Reconciliation Sublayer on
> multi-drop PHYs that support IEEE802.3cg-2019 Clause 148 (e.g.,
> 10BASE-T1S). This patch adds the appropriate netlink interface
> to ethtool.
>
> Signed-off-by: Piergiorgio Beruto <piergiorgio.beruto@...il.com>
> ---
> MAINTAINERS | 6 +
> drivers/net/phy/phy.c | 34 ++++
> drivers/net/phy/phy_device.c | 3 +
> include/linux/ethtool.h | 11 +
> include/linux/phy.h | 64 ++++++
> include/uapi/linux/ethtool_netlink.h | 25 +++
> net/ethtool/Makefile | 2 +-
> net/ethtool/netlink.c | 30 +++
> net/ethtool/netlink.h | 6 +
> net/ethtool/plca.c | 290 +++++++++++++++++++++++++++
> 10 files changed, 470 insertions(+), 1 deletion(-)
> create mode 100644 net/ethtool/plca.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 955c1be1efb2..7952243e4b43 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -16396,6 +16396,12 @@ S: Maintained
> F: Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.yaml
> F: drivers/iio/chemical/pms7003.c
>
> +PLCA RECONCILIATION SUBLAYER (IEEE802.3 Clause 148)
> +M: Piergiorgio Beruto <piergiorgio.beruto@...il.com>
> +L: netdev@...r.kernel.org
> +S: Maintained
> +F: net/ethtool/plca.c
> +
> PLDMFW LIBRARY
> M: Jacob Keller <jacob.e.keller@...el.com>
> S: Maintained
> diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
> index e5b6cb1a77f9..99e3497b6aa1 100644
> --- a/drivers/net/phy/phy.c
> +++ b/drivers/net/phy/phy.c
> @@ -543,6 +543,40 @@ int phy_ethtool_get_stats(struct phy_device *phydev,
> }
> EXPORT_SYMBOL(phy_ethtool_get_stats);
>
> +/**
> + *
> + */
> +int phy_ethtool_get_plca_cfg(struct phy_device *dev,
> + struct phy_plca_cfg *plca_cfg)
> +{
> + // TODO
> + return 0;
> +}
> +EXPORT_SYMBOL(phy_ethtool_get_plca_cfg);
> +
> +/**
> + *
> + */
> +int phy_ethtool_set_plca_cfg(struct phy_device *dev,
> + struct netlink_ext_ack *extack,
> + const struct phy_plca_cfg *plca_cfg)
> +{
> + // TODO
> + return 0;
> +}
> +EXPORT_SYMBOL(phy_ethtool_set_plca_cfg);
> +
> +/**
> + *
> + */
> +int phy_ethtool_get_plca_status(struct phy_device *dev,
> + struct phy_plca_status *plca_st)
> +{
> + // TODO
> + return 0;
> +}
> +EXPORT_SYMBOL(phy_ethtool_get_plca_status);
> +
> /**
> * phy_start_cable_test - Start a cable test
> *
> diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
> index 716870a4499c..f248010c403d 100644
> --- a/drivers/net/phy/phy_device.c
> +++ b/drivers/net/phy/phy_device.c
> @@ -3262,6 +3262,9 @@ static const struct ethtool_phy_ops phy_ethtool_phy_ops = {
> .get_sset_count = phy_ethtool_get_sset_count,
> .get_strings = phy_ethtool_get_strings,
> .get_stats = phy_ethtool_get_stats,
> + .get_plca_cfg = phy_ethtool_get_plca_cfg,
> + .set_plca_cfg = phy_ethtool_set_plca_cfg,
> + .get_plca_status = phy_ethtool_get_plca_status,
> .start_cable_test = phy_start_cable_test,
> .start_cable_test_tdr = phy_start_cable_test_tdr,
> };
> diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
> index 9e0a76fc7de9..4bfe95ec1f0a 100644
> --- a/include/linux/ethtool.h
> +++ b/include/linux/ethtool.h
> @@ -802,12 +802,16 @@ int ethtool_virtdev_set_link_ksettings(struct net_device *dev,
>
> struct phy_device;
> struct phy_tdr_config;
> +struct phy_plca_cfg;
> +struct phy_plca_status;
>
> /**
> * struct ethtool_phy_ops - Optional PHY device options
> * @get_sset_count: Get number of strings that @get_strings will write.
> * @get_strings: Return a set of strings that describe the requested objects
> * @get_stats: Return extended statistics about the PHY device.
> + * @get_plca_cfg: Return PLCA configuration.
> + * @set_plca_cfg: Set PLCA configuration.
> * @start_cable_test: Start a cable test
> * @start_cable_test_tdr: Start a Time Domain Reflectometry cable test
> *
> @@ -819,6 +823,13 @@ struct ethtool_phy_ops {
> int (*get_strings)(struct phy_device *dev, u8 *data);
> int (*get_stats)(struct phy_device *dev,
> struct ethtool_stats *stats, u64 *data);
> + int (*get_plca_cfg)(struct phy_device *dev,
> + struct phy_plca_cfg *plca_cfg);
> + int (*set_plca_cfg)(struct phy_device *dev,
> + struct netlink_ext_ack *extack,
> + const struct phy_plca_cfg *plca_cfg);
> + int (*get_plca_status)(struct phy_device *dev,
> + struct phy_plca_status *plca_st);
> int (*start_cable_test)(struct phy_device *phydev,
> struct netlink_ext_ack *extack);
> int (*start_cable_test_tdr)(struct phy_device *phydev,
> diff --git a/include/linux/phy.h b/include/linux/phy.h
> index 71eeb4e3b1fd..ab2c134d0a05 100644
> --- a/include/linux/phy.h
> +++ b/include/linux/phy.h
> @@ -765,6 +765,63 @@ struct phy_tdr_config {
> };
> #define PHY_PAIR_ALL -1
>
> +/**
> + * struct phy_plca_cfg - Configuration of the PLCA (Physical Layer Collision
> + * Avoidance) Reconciliation Sublayer.
> + *
> + * @version: read-only PLCA register map version. 0 = not available. Ignored
> + * when setting the configuration. Format is the same as reported by the PLCA
> + * IDVER register (31.CA00). -1 = not available.
> + * @enabled: PLCA configured mode (enabled/disabled). -1 = not available / don't
> + * set. 0 = disabled, anything else = enabled.
> + * @node_id: the PLCA local node identifier. -1 = not available / don't set.
> + * Allowed values [0 .. 254]. 255 = node disabled.
> + * @node_cnt: the PLCA node count (maximum number of nodes having a TO). Only
> + * meaningful for the coordinator (node_id = 0). -1 = not available / don't
> + * set. Allowed values [0 .. 255].
> + * @to_tmr: The value of the PLCA to_timer in bit-times, which determines the
> + * PLCA transmit opportunity window opening. See IEEE802.3 Clause 148 for
> + * more details. The to_timer shall be set equal over all nodes.
> + * -1 = not available / don't set. Allowed values [0 .. 255].
> + * @burst_cnt: controls how many additional frames a node is allowed to send in
> + * single transmit opportunity (TO). The default value of 0 means that the
> + * node is allowed exactly one frame per TO. A value of 1 allows two frames
> + * per TO, and so on. -1 = not available / don't set.
> + * Allowed values [0 .. 255].
> + * @burst_tmr: controls how many bit times to wait for the MAC to send a new
> + * frame before interrupting the burst. This value should be set to a value
> + * greater than the MAC inter-packet gap (which is typically 96 bits).
> + * -1 = not available / don't set. Allowed values [0 .. 255].
> + *
> + * A structure containing configuration parameters for setting/getting the PLCA
> + * RS configuration. The driver does not need to implement all the parameters,
> + * but should report what is actually used.
> + */
> +struct phy_plca_cfg {
> + s32 version;
> + s16 enabled;
> + s16 node_id;
> + s16 node_cnt;
> + s16 to_tmr;
> + s16 burst_cnt;
> + s16 burst_tmr;
> +};
> +
> +/**
> + * struct phy_plca_status - Status of the PLCA (Physical Layer Collision
> + * Avoidance) Reconciliation Sublayer.
> + *
> + * @pst: The PLCA status as reported by the PST bit in the PLCA STATUS
> + * register(31.CA03), indicating BEACON activity.
> + *
> + * A structure containing status information of the PLCA RS configuration.
> + * The driver does not need to implement all the parameters, but should report
> + * what is actually used.
> + */
> +struct phy_plca_status {
> + bool pst;
> +};
> +
> /**
> * struct phy_driver - Driver structure for a particular PHY type
> *
> @@ -1775,6 +1832,13 @@ int phy_ethtool_get_strings(struct phy_device *phydev, u8 *data);
> int phy_ethtool_get_sset_count(struct phy_device *phydev);
> int phy_ethtool_get_stats(struct phy_device *phydev,
> struct ethtool_stats *stats, u64 *data);
> +int phy_ethtool_get_plca_cfg(struct phy_device *dev,
> + struct phy_plca_cfg *plca_cfg);
> +int phy_ethtool_set_plca_cfg(struct phy_device *dev,
> + struct netlink_ext_ack *extack,
> + const struct phy_plca_cfg *plca_cfg);
> +int phy_ethtool_get_plca_status(struct phy_device *dev,
> + struct phy_plca_status *plca_st);
>
> static inline int phy_package_read(struct phy_device *phydev, u32 regnum)
> {
> diff --git a/include/uapi/linux/ethtool_netlink.h b/include/uapi/linux/ethtool_netlink.h
> index aaf7c6963d61..81e3d7b42d0f 100644
> --- a/include/uapi/linux/ethtool_netlink.h
> +++ b/include/uapi/linux/ethtool_netlink.h
> @@ -51,6 +51,9 @@ enum {
> ETHTOOL_MSG_MODULE_SET,
> ETHTOOL_MSG_PSE_GET,
> ETHTOOL_MSG_PSE_SET,
> + ETHTOOL_MSG_PLCA_GET_CFG,
> + ETHTOOL_MSG_PLCA_SET_CFG,
> + ETHTOOL_MSG_PLCA_GET_STATUS,
>
> /* add new constants above here */
> __ETHTOOL_MSG_USER_CNT,
> @@ -97,6 +100,9 @@ enum {
> ETHTOOL_MSG_MODULE_GET_REPLY,
> ETHTOOL_MSG_MODULE_NTF,
> ETHTOOL_MSG_PSE_GET_REPLY,
> + ETHTOOL_MSG_PLCA_GET_CFG_REPLY,
> + ETHTOOL_MSG_PLCA_GET_STATUS_REPLY,
> + ETHTOOL_MSG_PLCA_NTF,
>
> /* add new constants above here */
> __ETHTOOL_MSG_KERNEL_CNT,
> @@ -880,6 +886,25 @@ enum {
> ETHTOOL_A_PSE_MAX = (__ETHTOOL_A_PSE_CNT - 1)
> };
>
> +/* PLCA */
> +
Please use names used in the specification as close as possible and
document in comments real specification names.
> +enum {
> + ETHTOOL_A_PLCA_UNSPEC,
> + ETHTOOL_A_PLCA_HEADER, /* nest - _A_HEADER_* */
> + ETHTOOL_A_PLCA_VERSION, /* u16 */
> + ETHTOOL_A_PLCA_ENABLED, /* u8 */
30.16.1.1.1 aPLCAAdminState / 30.16.1.2.1 acPLCAAdminControl
> + ETHTOOL_A_PLCA_STATUS, /* u8 */
30.16.1.1.2 aPLCAStatus
> + ETHTOOL_A_PLCA_NODE_CNT, /* u8 */
30.16.1.1.3 aPLCANodeCount
> + ETHTOOL_A_PLCA_NODE_ID, /* u8 */
30.16.1.1.4 aPLCALocalNodeID
> + ETHTOOL_A_PLCA_TO_TMR, /* u8 */
30.16.1.1.5 aPLCATransmitOpportunityTimer
> + ETHTOOL_A_PLCA_BURST_CNT, /* u8 */
30.16.1.1.6 aPLCAMaxBurstCount
> + ETHTOOL_A_PLCA_BURST_TMR, /* u8 */
30.16.1.1.7 aPLCABurstTimer
> +
> + /* add new constants above here */
> + __ETHTOOL_A_PLCA_CNT,
> + ETHTOOL_A_PLCA_MAX = (__ETHTOOL_A_PLCA_CNT - 1)
> +};
Should we have access to 30.16.1.2.2 acPLCAReset in user space?
> +
> /* generic netlink info */
> #define ETHTOOL_GENL_NAME "ethtool"
> #define ETHTOOL_GENL_VERSION 1
> diff --git a/net/ethtool/Makefile b/net/ethtool/Makefile
> index 72ab0944262a..b18930e2ce9a 100644
> --- a/net/ethtool/Makefile
> +++ b/net/ethtool/Makefile
> @@ -8,4 +8,4 @@ ethtool_nl-y := netlink.o bitset.o strset.o linkinfo.o linkmodes.o \
> linkstate.o debug.o wol.o features.o privflags.o rings.o \
> channels.o coalesce.o pause.o eee.o tsinfo.o cabletest.o \
> tunnels.o fec.o eeprom.o stats.o phc_vclocks.o module.o \
> - pse-pd.o
> + pse-pd.o plca.o
> diff --git a/net/ethtool/netlink.c b/net/ethtool/netlink.c
> index 1a4c11356c96..eb044f48cb24 100644
> --- a/net/ethtool/netlink.c
> +++ b/net/ethtool/netlink.c
> @@ -287,6 +287,8 @@ ethnl_default_requests[__ETHTOOL_MSG_USER_CNT] = {
> [ETHTOOL_MSG_PHC_VCLOCKS_GET] = ðnl_phc_vclocks_request_ops,
> [ETHTOOL_MSG_MODULE_GET] = ðnl_module_request_ops,
> [ETHTOOL_MSG_PSE_GET] = ðnl_pse_request_ops,
> + [ETHTOOL_MSG_PLCA_GET_CFG] = ðnl_plca_cfg_request_ops,
> + [ETHTOOL_MSG_PLCA_GET_STATUS] = ðnl_plca_status_request_ops,
> };
>
> static struct ethnl_dump_ctx *ethnl_dump_context(struct netlink_callback *cb)
> @@ -602,6 +604,7 @@ ethnl_default_notify_ops[ETHTOOL_MSG_KERNEL_MAX + 1] = {
> [ETHTOOL_MSG_EEE_NTF] = ðnl_eee_request_ops,
> [ETHTOOL_MSG_FEC_NTF] = ðnl_fec_request_ops,
> [ETHTOOL_MSG_MODULE_NTF] = ðnl_module_request_ops,
> + [ETHTOOL_MSG_PLCA_NTF] = ðnl_plca_cfg_request_ops,
> };
>
> /* default notification handler */
> @@ -695,6 +698,7 @@ static const ethnl_notify_handler_t ethnl_notify_handlers[] = {
> [ETHTOOL_MSG_EEE_NTF] = ethnl_default_notify,
> [ETHTOOL_MSG_FEC_NTF] = ethnl_default_notify,
> [ETHTOOL_MSG_MODULE_NTF] = ethnl_default_notify,
> + [ETHTOOL_MSG_PLCA_NTF] = ethnl_default_notify,
> };
>
> void ethtool_notify(struct net_device *dev, unsigned int cmd, const void *data)
> @@ -1040,6 +1044,32 @@ static const struct genl_ops ethtool_genl_ops[] = {
> .policy = ethnl_pse_set_policy,
> .maxattr = ARRAY_SIZE(ethnl_pse_set_policy) - 1,
> },
> + {
> + .cmd = ETHTOOL_MSG_PLCA_GET_CFG,
> + .doit = ethnl_default_doit,
> + .start = ethnl_default_start,
> + .dumpit = ethnl_default_dumpit,
> + .done = ethnl_default_done,
> + .policy = ethnl_plca_get_cfg_policy,
> + .maxattr = ARRAY_SIZE(ethnl_plca_get_cfg_policy) - 1,
> + },
> + {
> + .cmd = ETHTOOL_MSG_PLCA_SET_CFG,
> + .flags = GENL_UNS_ADMIN_PERM,
> + .doit = ethnl_set_plca_cfg,
> + .policy = ethnl_plca_set_cfg_policy,
> + .maxattr = ARRAY_SIZE(ethnl_plca_set_cfg_policy) - 1,
> + },
> + {
> + .cmd = ETHTOOL_MSG_PLCA_GET_STATUS,
> + .doit = ethnl_default_doit,
> + .start = ethnl_default_start,
> + .dumpit = ethnl_default_dumpit,
> + .done = ethnl_default_done,
> + .policy = ethnl_plca_get_status_policy,
> + .maxattr = ARRAY_SIZE(ethnl_plca_get_status_policy) - 1,
> + },
> +
> };
>
> static const struct genl_multicast_group ethtool_nl_mcgrps[] = {
> diff --git a/net/ethtool/netlink.h b/net/ethtool/netlink.h
> index 1bfd374f9718..c0ed1a6d0833 100644
> --- a/net/ethtool/netlink.h
> +++ b/net/ethtool/netlink.h
> @@ -346,6 +346,8 @@ extern const struct ethnl_request_ops ethnl_stats_request_ops;
> extern const struct ethnl_request_ops ethnl_phc_vclocks_request_ops;
> extern const struct ethnl_request_ops ethnl_module_request_ops;
> extern const struct ethnl_request_ops ethnl_pse_request_ops;
> +extern const struct ethnl_request_ops ethnl_plca_cfg_request_ops;
> +extern const struct ethnl_request_ops ethnl_plca_status_request_ops;
>
> extern const struct nla_policy ethnl_header_policy[ETHTOOL_A_HEADER_FLAGS + 1];
> extern const struct nla_policy ethnl_header_policy_stats[ETHTOOL_A_HEADER_FLAGS + 1];
> @@ -386,6 +388,9 @@ extern const struct nla_policy ethnl_module_get_policy[ETHTOOL_A_MODULE_HEADER +
> extern const struct nla_policy ethnl_module_set_policy[ETHTOOL_A_MODULE_POWER_MODE_POLICY + 1];
> extern const struct nla_policy ethnl_pse_get_policy[ETHTOOL_A_PSE_HEADER + 1];
> extern const struct nla_policy ethnl_pse_set_policy[ETHTOOL_A_PSE_MAX + 1];
> +extern const struct nla_policy ethnl_plca_get_cfg_policy[ETHTOOL_A_PLCA_HEADER + 1];
> +extern const struct nla_policy ethnl_plca_set_cfg_policy[ETHTOOL_A_PLCA_MAX + 1];
> +extern const struct nla_policy ethnl_plca_get_status_policy[ETHTOOL_A_PLCA_HEADER + 1];
>
> int ethnl_set_linkinfo(struct sk_buff *skb, struct genl_info *info);
> int ethnl_set_linkmodes(struct sk_buff *skb, struct genl_info *info);
> @@ -406,6 +411,7 @@ int ethnl_tunnel_info_dumpit(struct sk_buff *skb, struct netlink_callback *cb);
> int ethnl_set_fec(struct sk_buff *skb, struct genl_info *info);
> int ethnl_set_module(struct sk_buff *skb, struct genl_info *info);
> int ethnl_set_pse(struct sk_buff *skb, struct genl_info *info);
> +int ethnl_set_plca_cfg(struct sk_buff *skb, struct genl_info *info);
>
> extern const char stats_std_names[__ETHTOOL_STATS_CNT][ETH_GSTRING_LEN];
> extern const char stats_eth_phy_names[__ETHTOOL_A_STATS_ETH_PHY_CNT][ETH_GSTRING_LEN];
> diff --git a/net/ethtool/plca.c b/net/ethtool/plca.c
> new file mode 100644
> index 000000000000..ab50d8b48bd6
> --- /dev/null
> +++ b/net/ethtool/plca.c
> @@ -0,0 +1,290 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +
> +#include <linux/phy.h>
> +#include <linux/ethtool_netlink.h>
> +
> +#include "netlink.h"
> +#include "common.h"
> +
> +struct plca_req_info {
> + struct ethnl_req_info base;
> +};
> +
> +struct plca_reply_data {
> + struct ethnl_reply_data base;
> + struct phy_plca_cfg plca_cfg;
> + struct phy_plca_status plca_st;
> +};
> +
> +#define PLCA_REPDATA(__reply_base) \
> + container_of(__reply_base, struct plca_reply_data, base)
> +
> +// PLCA get configuration message ------------------------------------------- //
> +
> +const struct nla_policy ethnl_plca_get_cfg_policy[] = {
> + [ETHTOOL_A_PLCA_HEADER] =
> + NLA_POLICY_NESTED(ethnl_header_policy),
> +};
> +
> +static int plca_get_cfg_prepare_data(const struct ethnl_req_info *req_base,
> + struct ethnl_reply_data *reply_base,
> + struct genl_info *info)
> +{
> + struct plca_reply_data *data = PLCA_REPDATA(reply_base);
> + struct net_device *dev = reply_base->dev;
> + const struct ethtool_phy_ops *ops;
> + int ret;
> +
> + // check that the PHY device is available and connected
> + if (!dev->phydev) {
> + ret = -EOPNOTSUPP;
> + goto out;
> + }
> +
> + // note: rtnl_lock is held already by ethnl_default_doit
> + ops = ethtool_phy_ops;
> + if (!ops || !ops->get_plca_cfg) {
> + ret = -EOPNOTSUPP;
> + goto out;
> + }
> +
> + ret = ethnl_ops_begin(dev);
> + if (ret < 0)
> + goto out;
> +
> + ret = ops->get_plca_cfg(dev->phydev, &data->plca_cfg);
> + if (ret < 0)
> + goto out;
> +
> + ethnl_ops_complete(dev);
> +
> +out:
> + return ret;
> +}
> +
> +static int plca_get_cfg_reply_size(const struct ethnl_req_info *req_base,
> + const struct ethnl_reply_data *reply_base)
> +{
> + return nla_total_size(sizeof(u16)) + /* _VERSION */
> + nla_total_size(sizeof(u8)) + /* _ENABLED */
> + nla_total_size(sizeof(u8)) + /* _STATUS */
> + nla_total_size(sizeof(u8)) + /* _NODE_CNT */
> + nla_total_size(sizeof(u8)) + /* _NODE_ID */
> + nla_total_size(sizeof(u8)) + /* _TO_TIMER */
> + nla_total_size(sizeof(u8)) + /* _BURST_COUNT */
> + nla_total_size(sizeof(u8)); /* _BURST_TIMER */
> +}
> +
> +static int plca_get_cfg_fill_reply(struct sk_buff *skb,
> + const struct ethnl_req_info *req_base,
> + const struct ethnl_reply_data *reply_base)
> +{
> + const struct plca_reply_data *data = PLCA_REPDATA(reply_base);
> + const struct phy_plca_cfg *plca = &data->plca_cfg;
> +
> + if ((plca->version >= 0 &&
> + nla_put_u16(skb, ETHTOOL_A_PLCA_VERSION, (u16)plca->version)) ||
> + (plca->enabled >= 0 &&
> + nla_put_u8(skb, ETHTOOL_A_PLCA_ENABLED, !!plca->enabled)) ||
> + (plca->node_id >= 0 &&
> + nla_put_u8(skb, ETHTOOL_A_PLCA_NODE_ID, (u8)plca->node_id)) ||
> + (plca->node_cnt >= 0 &&
> + nla_put_u8(skb, ETHTOOL_A_PLCA_NODE_CNT, (u8)plca->node_cnt)) ||
> + (plca->to_tmr >= 0 &&
> + nla_put_u8(skb, ETHTOOL_A_PLCA_TO_TMR, (u8)plca->to_tmr)) ||
> + (plca->burst_cnt >= 0 &&
> + nla_put_u8(skb, ETHTOOL_A_PLCA_BURST_CNT, (u8)plca->burst_cnt)) ||
> + (plca->burst_tmr >= 0 &&
> + nla_put_u8(skb, ETHTOOL_A_PLCA_BURST_TMR, (u8)plca->burst_tmr)))
> + return -EMSGSIZE;
> +
> + return 0;
> +};
> +
> +const struct ethnl_request_ops ethnl_plca_cfg_request_ops = {
> + .request_cmd = ETHTOOL_MSG_PLCA_GET_CFG,
> + .reply_cmd = ETHTOOL_MSG_PLCA_GET_CFG_REPLY,
> + .hdr_attr = ETHTOOL_A_PLCA_HEADER,
> + .req_info_size = sizeof(struct plca_req_info),
> + .reply_data_size = sizeof(struct plca_reply_data),
> +
> + .prepare_data = plca_get_cfg_prepare_data,
> + .reply_size = plca_get_cfg_reply_size,
> + .fill_reply = plca_get_cfg_fill_reply,
> +};
> +
> +// PLCA set configuration message ------------------------------------------- //
> +
> +const struct nla_policy ethnl_plca_set_cfg_policy[] = {
> + [ETHTOOL_A_PLCA_HEADER] =
> + NLA_POLICY_NESTED(ethnl_header_policy),
> + [ETHTOOL_A_PLCA_ENABLED] = { .type = NLA_U8 },
> + [ETHTOOL_A_PLCA_NODE_ID] = { .type = NLA_U8 },
> + [ETHTOOL_A_PLCA_NODE_CNT] = { .type = NLA_U8 },
> + [ETHTOOL_A_PLCA_TO_TMR] = { .type = NLA_U8 },
> + [ETHTOOL_A_PLCA_BURST_CNT] = { .type = NLA_U8 },
> + [ETHTOOL_A_PLCA_BURST_TMR] = { .type = NLA_U8 },
> +};
> +
> +int ethnl_set_plca_cfg(struct sk_buff *skb, struct genl_info *info)
> +{
> + struct ethnl_req_info req_info = {};
> + struct nlattr **tb = info->attrs;
> + const struct ethtool_phy_ops *ops;
> + struct phy_plca_cfg plca_cfg;
> + struct net_device *dev;
> +
> + bool mod = false;
> + int ret;
> +
> + ret = ethnl_parse_header_dev_get(&req_info,
> + tb[ETHTOOL_A_PLCA_HEADER],
> + genl_info_net(info), info->extack,
> + true);
> + if (ret < 0)
> + return ret;
> +
> + dev = req_info.dev;
> +
> + // check that the PHY device is available and connected
> + if (!dev->phydev) {
> + ret = -EOPNOTSUPP;
> + goto out;
> + }
> +
> + rtnl_lock();
> +
> + ops = ethtool_phy_ops;
> + if (!ops || !ops->set_plca_cfg) {
> + ret = -EOPNOTSUPP;
> + goto out_rtnl;
> + }
> +
> + ret = ethnl_ops_begin(dev);
> + if (ret < 0)
> + goto out_rtnl;
> +
> + memset(&plca_cfg, 0xFF, sizeof(plca_cfg));
> +
> + if (tb[ETHTOOL_A_PLCA_ENABLED]) {
> + plca_cfg.enabled = !!nla_get_u8(tb[ETHTOOL_A_PLCA_ENABLED]);
> + mod = true;
> + }
> +
> + if (tb[ETHTOOL_A_PLCA_NODE_ID]) {
> + plca_cfg.node_id = nla_get_u8(tb[ETHTOOL_A_PLCA_NODE_ID]);
> + mod = true;
> + }
> +
> + if (tb[ETHTOOL_A_PLCA_NODE_CNT]) {
> + plca_cfg.node_cnt = nla_get_u8(tb[ETHTOOL_A_PLCA_NODE_CNT]);
> + mod = true;
> + }
> +
> + if (tb[ETHTOOL_A_PLCA_TO_TMR]) {
> + plca_cfg.to_tmr = nla_get_u8(tb[ETHTOOL_A_PLCA_TO_TMR]);
> + mod = true;
> + }
> +
> + if (tb[ETHTOOL_A_PLCA_BURST_CNT]) {
> + plca_cfg.burst_cnt = nla_get_u8(tb[ETHTOOL_A_PLCA_BURST_CNT]);
> + mod = true;
> + }
> +
> + if (tb[ETHTOOL_A_PLCA_BURST_TMR]) {
> + plca_cfg.burst_tmr = nla_get_u8(tb[ETHTOOL_A_PLCA_BURST_TMR]);
> + mod = true;
> + }
> +
> + ret = 0;
> + if (!mod)
> + goto out_ops;
> +
> + ret = ops->set_plca_cfg(dev->phydev, info->extack, &plca_cfg);
> +
> + if (ret < 0)
> + goto out_ops;
> +
> + ethtool_notify(dev, ETHTOOL_MSG_PLCA_NTF, NULL);
> +
> +out_ops:
> + ethnl_ops_complete(dev);
> +out_rtnl:
> + rtnl_unlock();
> + ethnl_parse_header_dev_put(&req_info);
> +out:
> + return ret;
> +}
> +
> +// PLCA get status message -------------------------------------------------- //
> +
> +const struct nla_policy ethnl_plca_get_status_policy[] = {
> + [ETHTOOL_A_PLCA_HEADER] =
> + NLA_POLICY_NESTED(ethnl_header_policy),
> +};
> +
> +static int plca_get_status_prepare_data(const struct ethnl_req_info *req_base,
> + struct ethnl_reply_data *reply_base,
> + struct genl_info *info)
> +{
> + struct plca_reply_data *data = PLCA_REPDATA(reply_base);
> + struct net_device *dev = reply_base->dev;
> + const struct ethtool_phy_ops *ops;
> + int ret;
> +
> + // check that the PHY device is available and connected
> + if (!dev->phydev) {
> + ret = -EOPNOTSUPP;
> + goto out;
> + }
> +
> + // note: rtnl_lock is held already by ethnl_default_doit
> + ops = ethtool_phy_ops;
> + if (!ops || !ops->get_plca_status) {
> + ret = -EOPNOTSUPP;
> + goto out;
> + }
> +
> + ret = ethnl_ops_begin(dev);
> + if (ret < 0)
> + goto out;
> +
> + ret = ops->get_plca_status(dev->phydev, &data->plca_st);
> + if (ret < 0)
> + goto out;
> +
> + ethnl_ops_complete(dev);
> +out:
> + return ret;
> +}
> +
> +static int plca_get_status_reply_size(const struct ethnl_req_info *req_base,
> + const struct ethnl_reply_data *reply_base)
> +{
> + return nla_total_size(sizeof(u8)); /* _STATUS */
> +}
> +
> +static int plca_get_status_fill_reply(struct sk_buff *skb,
> + const struct ethnl_req_info *req_base,
> + const struct ethnl_reply_data *reply_base)
> +{
> + const struct plca_reply_data *data = PLCA_REPDATA(reply_base);
> + const u8 status = data->plca_st.pst;
> +
> + if (nla_put_u8(skb, ETHTOOL_A_PLCA_STATUS, !!status))
> + return -EMSGSIZE;
> +
> + return 0;
> +};
> +
> +const struct ethnl_request_ops ethnl_plca_status_request_ops = {
> + .request_cmd = ETHTOOL_MSG_PLCA_GET_STATUS,
> + .reply_cmd = ETHTOOL_MSG_PLCA_GET_STATUS_REPLY,
> + .hdr_attr = ETHTOOL_A_PLCA_HEADER,
> + .req_info_size = sizeof(struct plca_req_info),
> + .reply_data_size = sizeof(struct plca_reply_data),
> +
> + .prepare_data = plca_get_status_prepare_data,
> + .reply_size = plca_get_status_reply_size,
> + .fill_reply = plca_get_status_fill_reply,
> +};
> --
> 2.35.1
>
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
Powered by blists - more mailing lists