linux-kernel - [PATCH v3] PCI: mvebu: switch to using gpiod API

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <Y5EAft42YiT66mVj@google.com>
Date:   Wed, 7 Dec 2022 13:07:10 -0800
From:   Dmitry Torokhov <dmitry.torokhov@...il.com>
To:     Bjorn Helgaas <bhelgaas@...gle.com>
Cc:     Thomas Petazzoni <thomas.petazzoni@...tlin.com>,
        Lorenzo Pieralisi <lpieralisi@...nel.org>,
        Pali Rohár <pali@...nel.org>,
        Rob Herring <robh@...nel.org>,
        Krzysztof Wilczyński <kw@...ux.com>,
        linux-pci@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-kernel@...r.kernel.org
Subject: [PATCH v3] PCI: mvebu: switch to using gpiod API

This patch switches the driver away from legacy gpio/of_gpio API to
gpiod API, and removes use of of_get_named_gpio_flags() which I want to
make private to gpiolib.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@...il.com>
---

v3:
 - add #include <linux/irqchip/chained_irq.h> to avoid compile errors.
   This was previously included indirectly via linux/of_gpio.h ->
   linux/gpio/driver.h

v2:
 - free port->reset_name when reset GPIO is not found (Pali)
 - remove stray tab (Pali)

This is the last user of of_get_named_gpio_flags() in the "next" tree.

Thanks!

 drivers/pci/controller/pci-mvebu.c | 51 ++++++++++--------------------
 1 file changed, 17 insertions(+), 34 deletions(-)

diff --git a/drivers/pci/controller/pci-mvebu.c b/drivers/pci/controller/pci-mvebu.c
index 73db99035c2b..600964ba174c 100644
--- a/drivers/pci/controller/pci-mvebu.c
+++ b/drivers/pci/controller/pci-mvebu.c
@@ -11,15 +11,15 @@
 #include <linux/bitfield.h>
 #include <linux/clk.h>
 #include <linux/delay.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/init.h>
 #include <linux/irqdomain.h>
+#include <linux/irqchip/chained_irq.h>
 #include <linux/mbus.h>
 #include <linux/slab.h>
 #include <linux/platform_device.h>
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
-#include <linux/of_gpio.h>
 #include <linux/of_pci.h>
 #include <linux/of_platform.h>
 
@@ -1262,9 +1262,8 @@ static int mvebu_pcie_parse_port(struct mvebu_pcie *pcie,
 	struct mvebu_pcie_port *port, struct device_node *child)
 {
 	struct device *dev = &pcie->pdev->dev;
-	enum of_gpio_flags flags;
 	u32 slot_power_limit;
-	int reset_gpio, ret;
+	int ret;
 	u32 num_lanes;
 
 	port->pcie = pcie;
@@ -1328,40 +1327,24 @@ static int mvebu_pcie_parse_port(struct mvebu_pcie *pcie,
 			 port->name, child);
 	}
 
-	reset_gpio = of_get_named_gpio_flags(child, "reset-gpios", 0, &flags);
-	if (reset_gpio == -EPROBE_DEFER) {
-		ret = reset_gpio;
+	port->reset_name = devm_kasprintf(dev, GFP_KERNEL, "%s-reset",
+					  port->name);
+	if (!port->reset_name) {
+		ret = -ENOMEM;
 		goto err;
 	}
 
-	if (gpio_is_valid(reset_gpio)) {
-		unsigned long gpio_flags;
-
-		port->reset_name = devm_kasprintf(dev, GFP_KERNEL, "%s-reset",
-						  port->name);
-		if (!port->reset_name) {
-			ret = -ENOMEM;
+	port->reset_gpio = devm_fwnode_gpiod_get(dev, of_fwnode_handle(child),
+						 "reset", GPIOD_OUT_HIGH,
+						 port->name);
+	ret = PTR_ERR_OR_ZERO(port->reset_gpio);
+	if (ret) {
+		if (ret != -ENOENT)
 			goto err;
-		}
-
-		if (flags & OF_GPIO_ACTIVE_LOW) {
-			dev_info(dev, "%pOF: reset gpio is active low\n",
-				 child);
-			gpio_flags = GPIOF_ACTIVE_LOW |
-				     GPIOF_OUT_INIT_LOW;
-		} else {
-			gpio_flags = GPIOF_OUT_INIT_HIGH;
-		}
-
-		ret = devm_gpio_request_one(dev, reset_gpio, gpio_flags,
-					    port->reset_name);
-		if (ret) {
-			if (ret == -EPROBE_DEFER)
-				goto err;
-			goto skip;
-		}
-
-		port->reset_gpio = gpio_to_desc(reset_gpio);
+		/* reset gpio is optional */
+		port->reset_gpio = NULL;
+		devm_kfree(dev, port->reset_name);
+		port->reset_name = NULL;
 	}
 
 	slot_power_limit = of_pci_get_slot_power_limit(child,
-- 
2.39.0.rc0.267.gcb52ba06e7-goog


-- 
Dmitry