lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <20221207220850.GA1479029@bhelgaas>
Date:   Wed, 7 Dec 2022 16:08:50 -0600
From:   Bjorn Helgaas <helgaas@...nel.org>
To:     Dmitry Torokhov <dmitry.torokhov@...il.com>
Cc:     Bjorn Helgaas <bhelgaas@...gle.com>,
        Thomas Petazzoni <thomas.petazzoni@...tlin.com>,
        Lorenzo Pieralisi <lpieralisi@...nel.org>,
        Pali Rohár <pali@...nel.org>,
        Rob Herring <robh@...nel.org>,
        Krzysztof Wilczyński <kw@...ux.com>,
        linux-pci@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-kernel@...r.kernel.org
Subject: Re: [PATCH v3] PCI: mvebu: switch to using gpiod API

On Wed, Dec 07, 2022 at 01:07:10PM -0800, Dmitry Torokhov wrote:
> This patch switches the driver away from legacy gpio/of_gpio API to
> gpiod API, and removes use of of_get_named_gpio_flags() which I want to
> make private to gpiolib.
> 
> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@...il.com>

Applied to pci/ctrl/mvebu for v6.2, thanks, Dmitry!

> ---
> 
> v3:
>  - add #include <linux/irqchip/chained_irq.h> to avoid compile errors.
>    This was previously included indirectly via linux/of_gpio.h ->
>    linux/gpio/driver.h
> 
> v2:
>  - free port->reset_name when reset GPIO is not found (Pali)
>  - remove stray tab (Pali)
> 
> This is the last user of of_get_named_gpio_flags() in the "next" tree.
> 
> Thanks!
> 
>  drivers/pci/controller/pci-mvebu.c | 51 ++++++++++--------------------
>  1 file changed, 17 insertions(+), 34 deletions(-)
> 
> diff --git a/drivers/pci/controller/pci-mvebu.c b/drivers/pci/controller/pci-mvebu.c
> index 73db99035c2b..600964ba174c 100644
> --- a/drivers/pci/controller/pci-mvebu.c
> +++ b/drivers/pci/controller/pci-mvebu.c
> @@ -11,15 +11,15 @@
>  #include <linux/bitfield.h>
>  #include <linux/clk.h>
>  #include <linux/delay.h>
> -#include <linux/gpio.h>
> +#include <linux/gpio/consumer.h>
>  #include <linux/init.h>
>  #include <linux/irqdomain.h>
> +#include <linux/irqchip/chained_irq.h>
>  #include <linux/mbus.h>
>  #include <linux/slab.h>
>  #include <linux/platform_device.h>
>  #include <linux/of_address.h>
>  #include <linux/of_irq.h>
> -#include <linux/of_gpio.h>
>  #include <linux/of_pci.h>
>  #include <linux/of_platform.h>
>  
> @@ -1262,9 +1262,8 @@ static int mvebu_pcie_parse_port(struct mvebu_pcie *pcie,
>  	struct mvebu_pcie_port *port, struct device_node *child)
>  {
>  	struct device *dev = &pcie->pdev->dev;
> -	enum of_gpio_flags flags;
>  	u32 slot_power_limit;
> -	int reset_gpio, ret;
> +	int ret;
>  	u32 num_lanes;
>  
>  	port->pcie = pcie;
> @@ -1328,40 +1327,24 @@ static int mvebu_pcie_parse_port(struct mvebu_pcie *pcie,
>  			 port->name, child);
>  	}
>  
> -	reset_gpio = of_get_named_gpio_flags(child, "reset-gpios", 0, &flags);
> -	if (reset_gpio == -EPROBE_DEFER) {
> -		ret = reset_gpio;
> +	port->reset_name = devm_kasprintf(dev, GFP_KERNEL, "%s-reset",
> +					  port->name);
> +	if (!port->reset_name) {
> +		ret = -ENOMEM;
>  		goto err;
>  	}
>  
> -	if (gpio_is_valid(reset_gpio)) {
> -		unsigned long gpio_flags;
> -
> -		port->reset_name = devm_kasprintf(dev, GFP_KERNEL, "%s-reset",
> -						  port->name);
> -		if (!port->reset_name) {
> -			ret = -ENOMEM;
> +	port->reset_gpio = devm_fwnode_gpiod_get(dev, of_fwnode_handle(child),
> +						 "reset", GPIOD_OUT_HIGH,
> +						 port->name);
> +	ret = PTR_ERR_OR_ZERO(port->reset_gpio);
> +	if (ret) {
> +		if (ret != -ENOENT)
>  			goto err;
> -		}
> -
> -		if (flags & OF_GPIO_ACTIVE_LOW) {
> -			dev_info(dev, "%pOF: reset gpio is active low\n",
> -				 child);
> -			gpio_flags = GPIOF_ACTIVE_LOW |
> -				     GPIOF_OUT_INIT_LOW;
> -		} else {
> -			gpio_flags = GPIOF_OUT_INIT_HIGH;
> -		}
> -
> -		ret = devm_gpio_request_one(dev, reset_gpio, gpio_flags,
> -					    port->reset_name);
> -		if (ret) {
> -			if (ret == -EPROBE_DEFER)
> -				goto err;
> -			goto skip;
> -		}
> -
> -		port->reset_gpio = gpio_to_desc(reset_gpio);
> +		/* reset gpio is optional */
> +		port->reset_gpio = NULL;
> +		devm_kfree(dev, port->reset_name);
> +		port->reset_name = NULL;
>  	}
>  
>  	slot_power_limit = of_pci_get_slot_power_limit(child,
> -- 
> 2.39.0.rc0.267.gcb52ba06e7-goog
> 
> 
> -- 
> Dmitry
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@...ts.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ