[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20221208192006.1070898-1-dianders@chromium.org>
Date: Thu, 8 Dec 2022 11:20:01 -0800
From: Douglas Anderson <dianders@...omium.org>
To: Bjorn Andersson <andersson@...nel.org>,
Dmitry Torokhov <dmitry.torokhov@...il.com>
Cc: mka@...omium.org, swboyd@...omium.org,
linux-arm-msm@...r.kernel.org, linux-input@...r.kernel.org,
Yunlong Jia <ecs.beijing2022@...il.com>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Douglas Anderson <dianders@...omium.org>,
Andy Gross <agross@...nel.org>,
Johnny Chuang <johnny.chuang.emc@...il.com>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Rob Herring <robh+dt@...nel.org>, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH 0/5] arm64: dts: qcom: sc7180: Make pazquel360's touchscreen work
This series of patches adds / fixes problems with pazquel360's
touchscreen. A few notes here:
1. Originally the touchscreen was supposed to be added as part of the
first landing of the pazquel360 device tree. ...but the fact that
Yunlong changed email addresses seems to have messed up Bjorn's
scripts. What landed was v3 [1] instead of v5 [2]. The pazquel360 part
of this series is that diff.
2. We delayed sending the fixup till now because soon after the series
landed upstream we found that some laptops were having trouble
initting the touchscreen in cases where the eDP/touchscreen regulator
was left on by the bootloader. We've been struggling to make sense of
all of this. As part of this investigation we landed a85fbd649844
("Input: elants_i2c - properly handle the reset GPIO when power is
off") but that wasn't enough. That fix, together with the fixes in
this series, is enough though.
3. This series is mostly device tree changes with one more change to
the Elan driver. They are fine to land in separate trees. It turns out
that with _just_ the device tree changes things are actually working
OK but the timing is tight, so getting a little extra breathing room
from the Linux driver is nice.
4. Despite the fact that we did debugging here on pazquel360, many of
the changes here are made in general for trogdor devices. I believe
that this will make the timing more correct on those devices even if
we weren't actually seeing problems.
[1] https://lore.kernel.org/r/20220901024827.v3.2.Iea2d2918adfff2825b87d428b5732717425c196f@changeid
[2] https://lore.kernel.org/r/20220923083657.v5.3.Iea2d2918adfff2825b87d428b5732717425c196f@changeid
Douglas Anderson (5):
arm64: dts: qcom: sc7180: Bump up trogdor ts_reset_l drive strength
arm64: dts: qcom: sc7180: Add trogdor eDP/touchscreen regulator
off-on-time
arm64: dts: qcom: sc7180: Start the trogdor eDP/touchscreen regulator
on
arm64: dts: qcom: sc7180: Add pazquel360 touschreen
Input: elants_i2c: Delay longer with reset asserted
.../dts/qcom/sc7180-trogdor-homestar.dtsi | 18 ++++++++++++++++
.../qcom/sc7180-trogdor-parade-ps8640.dtsi | 20 ++++++++++++++++++
.../dts/qcom/sc7180-trogdor-pazquel360.dtsi | 21 +++++++++++++++++++
.../dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi | 20 ++++++++++++++++++
arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 10 ++++++++-
drivers/input/touchscreen/elants_i2c.c | 2 +-
6 files changed, 89 insertions(+), 2 deletions(-)
--
2.39.0.rc1.256.g54fd8350bd-goog
Powered by blists - more mailing lists