| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <Y5G95OknX2dcBhDw@google.com>
Date: Thu, 8 Dec 2022 10:35:16 +0000
From: Lee Jones <lee@...nel.org>
To: Larry Lai <larry.lai@...jingtech.com>
Cc: "andriy.shevchenko@...ux.intel.com"
<andriy.shevchenko@...ux.intel.com>,
"linus.walleij@...aro.org" <linus.walleij@...aro.org>,
"pavel@....cz" <pavel@....cz>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-gpio@...r.kernel.org" <linux-gpio@...r.kernel.org>,
"linux-leds@...r.kernel.org" <linux-leds@...r.kernel.org>,
"GaryWang@...on.com.tw" <GaryWang@...on.com.tw>,
Musa Lin <musa.lin@...jingtech.com>,
Jack Chang <jack.chang@...jingtech.com>,
Noah Hung <noah.hung@...jingtech.com>,
Javier Arteaga <javier@...tex.com>,
Nicola Lunghi <nicola.lunghi@...tex.com>
Subject: Re: 回覆: [PATCH V3 1/3] mfd: Add
support for UP board CPLD/FPGA
On Wed, 07 Dec 2022, Larry Lai wrote:
> Dear Jones,
>
> Thank you for spending time to review this code, please kindly check the following comments with Larry (11/25) beginning .
> Some of issues we will fix in new RFC_1125, some may need you give us more examples or comments.
> We also explained more detail about the FPGA read and write protocol in RFC_1125.
>
> Best Regards,
> Larry Lai
>
> 寄件者: Lee Jones <lee@...nel.org>
> 日期: 星期三, 2022年11月16日 下午11:13
> 收件者: Larry Lai <larry.lai@...jingtech.com>
> 副本: andriy.shevchenko@...ux.intel.com <andriy.shevchenko@...ux.intel.com>, linus.walleij@...aro.org <linus.walleij@...aro.org>, pavel@....cz <pavel@....cz>, linux-kernel@...r.kernel.org <linux-kernel@...r.kernel.org>, linux-gpio@...r.kernel.org <linux-gpio@...r.kernel.org>, linux-leds@...r.kernel.org <linux-leds@...r.kernel.org>, GaryWang@...on.com.tw <GaryWang@...on.com.tw>, Musa Lin <musa.lin@...jingtech.com>, Jack Chang <jack.chang@...jingtech.com>, Noah Hung <noah.hung@...jingtech.com>, Javier Arteaga <javier@...tex.com>, Nicola Lunghi <nicola.lunghi@...tex.com>
> 主旨: Re: [PATCH V3 1/3] mfd: Add support for UP board CPLD/FPGA
Please fix your mailer so that these headers do not end up in the
email body.
> On Wed, 09 Nov 2022, chengwei wrote:
>
> > The UP Squared board <http://www.upboard.com> implements certain
> > features (pin control, onboard LEDs or CEC) through an on-board CPLD/FPGA.
> >
> > This mfd driver implements the line protocol to read and write registers
> > from the FPGA through regmap. The register address map is also included.
> >
> > The UP Boards provide a few I/O pin headers (for both GPIO and
> > functions), including a 40-pin Raspberry Pi compatible header.
> >
> > This patch implements support for the FPGA-based pin controller that
> > manages direction and enable state for those header pins.
> >
> > Partial support UP boards:
> > * UP core + CREX
> > * UP core + CRST02
> >
> > PATCH V3:
> > (1) fixed kernel test robot compiler warning
> >
> > PATCH V2:
> > (1) Synchronizing upboard github to rc2
> > (2) Refer 2022/10/31 Lee Jones review, fixed some of the issues.
>
> The change log should be below the '---' below.
Please fix your mailer to quote the message you're replying to.
Then you can omit the "Larry ..." tags.
> Larry (11/25) : We already fixed it on RFC 1125, thx.
You don't have to reply to comments if you agree with them.
> > Signed-off-by: Javier Arteaga <javier@...tex.com>
> > [merge various fixes]
>
> Drop this line please.
>
> > Signed-off-by: Nicola Lunghi <nicola.lunghi@...tex.com>
> > Signed-off-by: chengwei <larry.lai@...jingtech.com>
>
> Full name?
> Larry (11/25) : We already fixed it on RFC 1125, thx.
>
> > ---
> > drivers/mfd/Kconfig | 12 +
> > drivers/mfd/Makefile | 1 +
> > drivers/mfd/upboard-fpga.c | 620 +++++++++++++++++++++++++++++++
> > include/linux/mfd/upboard-fpga.h | 56 +++
> > 4 files changed, 689 insertions(+)
> > create mode 100644 drivers/mfd/upboard-fpga.c
> > create mode 100644 include/linux/mfd/upboard-fpga.h
> >
> > diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> > index abb58ab1a1a4..c1d72a70e5f2 100644
> > --- a/drivers/mfd/Kconfig
> > +++ b/drivers/mfd/Kconfig
[...]
> > +#define UPBOARD_DEVID 0
>
> No, that's not what this means.
>
> Please use the defines already provided for you.
> Larry (11/25) : please refer https://www.kernel.org/doc/htmldocs/writing_musb_glue_layer/device-platform-data.html
> The id field could be set to -1 (equivalent to PLATFORM_DEVID_NONE),
> -2 (equivalent to PLATFORM_DEVID_AUTO) or start with 0 for the first
> device of this kind if we want a specific id number.
Just use '0' in-place.
[...]
> > +static struct upboard_led_data upboard_up2_led_data[] = {
> > + { .bit = 0, .colour = "blue" },
> > + { .bit = 1, .colour = "yellow" },
> > + { .bit = 2, .colour = "green" },
> > + { .bit = 3, .colour = "red" },
> > +};
> > +
> > +static const struct mfd_cell upboard_up2_mfd_cells[] = {
> > + { .name = "upboard-pinctrl" },
> > + UPBOARD_LED_CELL(upboard_up2_led_data, 0),
> > + UPBOARD_LED_CELL(upboard_up2_led_data, 1),
> > + UPBOARD_LED_CELL(upboard_up2_led_data, 2),
> > + UPBOARD_LED_CELL(upboard_up2_led_data, 3),
> > +};
> > +
> > +static const struct upboard_fpga_data upboard_up2_fpga_data = {
> > + .regmapconf = &upboard_up2_regmap_config,
> > + .cells = upboard_up2_mfd_cells,
> > + .ncells = ARRAY_SIZE(upboard_up2_mfd_cells),
> > +};
>
> You'd be better off getting rid of 'struct upboard_fpga_data'
> altogether.
> Larry (11/25) : we cannot understand it clearly. could you kindly give us more examples, thanks.
You shouldn't mix platform initialisation strategies. Doing so gets
messy real quick. So no passing MFD data through ACPI or DT
match-data please. Pass device IDs though, then match on those
instead.
[...]
> > +static void upboard_led_gpio_init(struct upboard_fpga *fpga)
>
> Should this all live in drivers/led?
> Larry (11/25) : MFD upboard-fpga is acpi driver and can recognize the AANT ID from different kind of upboards.
> We get the led gpio initialized information from this then add led-upboard driver.
MFD doesn't know (or want to know) about LEDs.
Please place all LED initialisation inside the LED driver.
> > +{
> > + struct gpio_led blue_led, yellow_led, green_led, red_led;
> > + struct gpio_desc *desc;
> > + int blue_gpio = -1, yellow_gpio = -1, green_gpio = -1, red_gpio = -1;
> > + int leds = 0;
> > + static struct gpio_led upboard_gpio_leds[8];
> > + static struct gpio_led_platform_data upboard_gpio_led_platform_data;
> > + static const struct mfd_cell upboard_gpio_led_cells[] = {
> > + MFD_CELL_BASIC("leds-gpio", NULL,
> > + &upboard_gpio_led_platform_data,
> > + sizeof(upboard_gpio_led_platform_data), 0)
> > + };
> > +
> > + desc = devm_gpiod_get(fpga->dev, "blue", GPIOD_OUT_LOW);
> > +
> > + if (!IS_ERR(desc)) {
> > + blue_gpio = desc_to_gpio(desc);
> > + leds++;
> > + devm_gpiod_put(fpga->dev, desc);
> > + }
> > + desc = devm_gpiod_get(fpga->dev, "yellow", GPIOD_OUT_LOW);
> > + if (!IS_ERR(desc)) {
> > + yellow_gpio = desc_to_gpio(desc);
> > + leds++;
> > + devm_gpiod_put(fpga->dev, desc);
> > + }
> > + desc = devm_gpiod_get(fpga->dev, "green", GPIOD_OUT_LOW);
> > + if (!IS_ERR(desc)) {
> > + green_gpio = desc_to_gpio(desc);
> > + leds++;
> > + devm_gpiod_put(fpga->dev, desc);
> > + }
> > + desc = devm_gpiod_get(fpga->dev, "red", GPIOD_OUT_LOW);
> > + if (!IS_ERR(desc)) {
> > + red_gpio = desc_to_gpio(desc);
> > + leds++;
> > + devm_gpiod_put(fpga->dev, desc);
> > + }
> > +
> > + if (leds == 0) //no leds
> > + return;
> > +
> > + leds = 0;
> > + if (blue_gpio > -1) {
> > + blue_led.name = "upboard:blue:";
> > + blue_led.gpio = blue_gpio;
> > + blue_led.default_state = LEDS_GPIO_DEFSTATE_KEEP;
> > + upboard_gpio_leds[leds++] = blue_led;
> > + }
> > + if (yellow_gpio > -1) {
> > + yellow_led.name = "upboard:yellow:";
> > + yellow_led.gpio = yellow_gpio;
> > + yellow_led.default_state = LEDS_GPIO_DEFSTATE_KEEP;
> > + upboard_gpio_leds[leds++] = yellow_led;
> > + }
> > + if (green_gpio > -1) {
> > + green_led.name = "upboard:green:";
> > + green_led.gpio = green_gpio;
> > + green_led.default_state = LEDS_GPIO_DEFSTATE_KEEP;
> > + upboard_gpio_leds[leds++] = green_led;
> > + }
> > + if (red_gpio > -1) {
> > + red_led.name = "upboard:red:";
> > + red_led.gpio = red_gpio;
> > + red_led.default_state = LEDS_GPIO_DEFSTATE_KEEP;
> > + upboard_gpio_leds[leds++] = red_led;
> > + }
> > +
> > + upboard_gpio_led_platform_data.num_leds = leds;
> > + upboard_gpio_led_platform_data.leds = upboard_gpio_leds;
> > +
> > + if (devm_mfd_add_devices(fpga->dev, UPBOARD_DEVID,
> > + upboard_gpio_led_cells,
> > + ARRAY_SIZE(upboard_gpio_led_cells),
> > + NULL, 0, NULL)) {
> > + dev_info(fpga->dev, "Failed to add GPIO leds");
> > + }
> > +}
> > +
> > +static const struct acpi_device_id upboard_fpga_acpi_match[] = {
> > + { "AANT0000", (kernel_ulong_t)&upboard_pinctrl_data },
> > + { "AANT0F00", (kernel_ulong_t)&upboard_up_fpga_data },
> > + { "AANT0F01", (kernel_ulong_t)&upboard_up2_fpga_data },
> > + { "AANT0F02", (kernel_ulong_t)&upboard_upcore_crex_fpga_data },
> > + { "AANT0F03", (kernel_ulong_t)&upboard_upcore_crst02_fpga_data },
> > + { "AANT0F04", (kernel_ulong_t)&upboard_up_fpga_data },
> > + { }
> > +};
> > +MODULE_DEVICE_TABLE(acpi, upboard_fpga_acpi_match);
>
> Please don't push MFD configuration data through the ACPI API.
Ah look, I already said this.
> Larry (11/25) : we cannot understand it clearly. could you kindly give us more examples, thanks.
All of these point to MFD cell initialisation structs. Please don't
do that. Assign each platform with an ID, then pull that ID out of
the ACPI match-data and assign local 'cells', 'ncells', etc based on
the ID.
[...]
--
Lee Jones [李琼斯]
Powered by blists - more mailing lists