[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <Y5H3EH7kPOwGI2SQ@mail.local>
Date: Thu, 8 Dec 2022 15:39:12 +0100
From: Alexandre Belloni <alexandre.belloni@...tlin.com>
To: Claudiu Beznea <claudiu.beznea@...rochip.com>
Cc: mturquette@...libre.com, sboyd@...nel.org,
nicolas.ferre@...rochip.com, krzysztof.kozlowski@...aro.org,
linux-kernel@...r.kernel.org, linux-clk@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH 3/3] clk: at91: do not compile dt-compat.c for sama7g5
and sam9x60
On 08/12/2022 13:45:15+0200, Claudiu Beznea wrote:
> There is no need to have dt-compat.c compiled for SAMA7G5 and SAM9X60
> as there is no in kernel device tree that could use it. Thus avoid
> compiling dt-compat.c for them.
>
Isn't it time to drop dt-compat.c? I was going to send a patch after 6.1
is released
> Signed-off-by: Claudiu Beznea <claudiu.beznea@...rochip.com>
> ---
> drivers/clk/at91/Makefile | 16 ++++++++--------
> 1 file changed, 8 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/clk/at91/Makefile b/drivers/clk/at91/Makefile
> index 79301e1c1c36..89061b85e7d2 100644
> --- a/drivers/clk/at91/Makefile
> +++ b/drivers/clk/at91/Makefile
> @@ -3,7 +3,7 @@
> # Makefile for at91 specific clk
> #
>
> -obj-y += pmc.o sckc.o dt-compat.o
> +obj-y += pmc.o sckc.o
> obj-y += clk-slow.o clk-main.o clk-pll.o clk-plldiv.o clk-master.o
> obj-y += clk-system.o clk-peripheral.o clk-programmable.o
>
> @@ -15,12 +15,12 @@ obj-$(CONFIG_HAVE_AT91_H32MX) += clk-h32mx.o
> obj-$(CONFIG_HAVE_AT91_GENERATED_CLK) += clk-generated.o
> obj-$(CONFIG_HAVE_AT91_I2S_MUX_CLK) += clk-i2s-mux.o
> obj-$(CONFIG_HAVE_AT91_SAM9X60_PLL) += clk-sam9x60-pll.o
> -obj-$(CONFIG_SOC_AT91RM9200) += at91rm9200.o
> -obj-$(CONFIG_SOC_AT91SAM9) += at91sam9260.o at91sam9rl.o at91sam9x5.o
> -obj-$(CONFIG_SOC_AT91SAM9) += at91sam9g45.o
> -obj-$(CONFIG_SOC_AT91SAM9) += at91sam9n12.o at91sam9x5.o
> +obj-$(CONFIG_SOC_AT91RM9200) += at91rm9200.o dt-compat.o
> +obj-$(CONFIG_SOC_AT91SAM9) += at91sam9260.o at91sam9rl.o at91sam9x5.o dt-compat.o
> +obj-$(CONFIG_SOC_AT91SAM9) += at91sam9g45.o dt-compat.o
> +obj-$(CONFIG_SOC_AT91SAM9) += at91sam9n12.o at91sam9x5.o dt-compat.o
> obj-$(CONFIG_SOC_SAM9X60) += sam9x60.o
> -obj-$(CONFIG_SOC_SAMA5D3) += sama5d3.o
> -obj-$(CONFIG_SOC_SAMA5D4) += sama5d4.o
> -obj-$(CONFIG_SOC_SAMA5D2) += sama5d2.o
> +obj-$(CONFIG_SOC_SAMA5D3) += sama5d3.o dt-compat.o
> +obj-$(CONFIG_SOC_SAMA5D4) += sama5d4.o dt-compat.o
> +obj-$(CONFIG_SOC_SAMA5D2) += sama5d2.o dt-compat.o
> obj-$(CONFIG_SOC_SAMA7G5) += sama7g5.o
> --
> 2.34.1
>
--
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
Powered by blists - more mailing lists