[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <78769cf4-84cc-5195-57b8-823d9fc33794@postmarketos.org>
Date: Thu, 15 Dec 2022 20:42:02 +0000
From: Caleb Connolly <kc@...tmarketos.org>
To: Arnaud Ferraris <arnaud.ferraris@...labora.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Heiko Stuebner <heiko@...ech.de>, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-rockchip@...ts.infradead.org, linux-kernel@...r.kernel.org
Cc: kernel@...labora.com
Subject: Re: [PATCH] arm64: dts: rockchip: fix input enable pinconf on rk3399
On 15/12/2022 10:19, Arnaud Ferraris wrote:
> When the input enable pinconf was introduced, a default drive-strength
> value of 2 was set for the pull up/down configs. However, this parameter
> is unneeded when configuring the pin as input, and having a single
> hardcoded value here is actually harmful: GPIOs on the RK3399 have
> various same drive-strength capabilities depending on the bank and port
> they belong to.
>
> As an example, trying to configure the GPIO4_PD3 pin as an input with
> pull-up enabled fails with the following output:
>
> [ 10.706542] rockchip-pinctrl pinctrl: unsupported driver strength 2
> [ 10.713661] rockchip-pinctrl pinctrl: pin_config_set op failed for pin 155
>
> (acceptable drive-strength values for this pin being 3, 6, 9 and 12)
>
> Let's drop the drive-strength property from all input pinconfs in order
> to solve this issue.
>
> Fixes: ec48c3e82ca3 ("arm64: dts: rockchip: add an input enable pinconf to rk3399")
> Signed-off-by: Arnaud Ferraris <arnaud.ferraris@...labora.com>
Reviewed-by: Caleb Connolly <kc@...tmarketos.org>
> ---
> arch/arm64/boot/dts/rockchip/rk3399.dtsi | 2 --
> 1 file changed, 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
> index 92c2207e686c..59858f2dc8b9 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
> @@ -2221,13 +2221,11 @@ pcfg_input_enable: pcfg-input-enable {
> pcfg_input_pull_up: pcfg-input-pull-up {
> input-enable;
> bias-pull-up;
> - drive-strength = <2>;
> };
>
> pcfg_input_pull_down: pcfg-input-pull-down {
> input-enable;
> bias-pull-down;
> - drive-strength = <2>;
> };
>
> clock {
--
Kind Regards,
Caleb (they/them)
Powered by blists - more mailing lists