[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1c467305-15b2-5a0d-0312-f7241deae812@linaro.org>
Date: Thu, 15 Dec 2022 17:07:29 +0200
From: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
To: Melody Olvera <quic_molvera@...cinc.com>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>
Cc: linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v4 2/2] arm64: dts: qcom: Add base QDU1000/QRU1000 IDP DTs
On 22/11/2022 00:15, Melody Olvera wrote:
>
>
> On 11/21/2022 5:07 AM, Konrad Dybcio wrote:
>>
>> On 18.11.2022 20:22, Melody Olvera wrote:
>>> Add DTs for Qualcomm IDP platforms using the QDU1000 and QRU1000
>>> SoCs.
>>>
>>> Signed-off-by: Melody Olvera <quic_molvera@...cinc.com>
>>> ---
>>> arch/arm64/boot/dts/qcom/Makefile | 2 +
>>> arch/arm64/boot/dts/qcom/qdu1000-idp.dts | 266 +++++++++++++++++++++++
>>> arch/arm64/boot/dts/qcom/qru1000-idp.dts | 266 +++++++++++++++++++++++
>>> 3 files changed, 534 insertions(+)
>>> create mode 100644 arch/arm64/boot/dts/qcom/qdu1000-idp.dts
>>> create mode 100644 arch/arm64/boot/dts/qcom/qru1000-idp.dts
>>>
>>> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
>>> index afe496a93f94..da66d4a0a884 100644
>>> --- a/arch/arm64/boot/dts/qcom/Makefile
>>> +++ b/arch/arm64/boot/dts/qcom/Makefile
>>> @@ -53,7 +53,9 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-maple.dtb
>>> dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-poplar.dtb
>>> dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb
>>> dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb
>>> +dtb-$(CONFIG_ARCH_QCOM) += qdu1000-idp.dtb
>>> dtb-$(CONFIG_ARCH_QCOM) += qrb5165-rb5.dtb
>>> +dtb-$(CONFIG_ARCH_QCOM) += qru1000-idp.dtb
>>> dtb-$(CONFIG_ARCH_QCOM) += sa8155p-adp.dtb
>>> dtb-$(CONFIG_ARCH_QCOM) += sa8295p-adp.dtb
>>> dtb-$(CONFIG_ARCH_QCOM) += sc7180-idp.dtb
>>> diff --git a/arch/arm64/boot/dts/qcom/qdu1000-idp.dts b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts
>>> new file mode 100644
>>> index 000000000000..5aed483201fa
>>> --- /dev/null
>>> +++ b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts
>>> @@ -0,0 +1,266 @@
>>> +// SPDX-License-Identifier: BSD-3-Clause
>>> +/*
>>> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
>>> + */
>>> +
>>> +/dts-v1/;
>>> +
>>> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
>>> +#include "qdu1000.dtsi"
>>> +#include "pm8150.dtsi"
>>> +
>>> +/ {
>>> + model = "Qualcomm Technologies, Inc. QDU1000 IDP";
>>> + compatible = "qcom,qdu1000-idp", "qcom,qdu1000";
>> Missing chassis-type
>
> Sorry, not sure what you mean here... Do you mean like QRD, HDK, MTP, etc.?
> If so, then IDP is the chassis type.
>
>>
>>> +
>>> + aliases {
>>> + serial0 = &uart7;
>>> + };
>>> +
>>> + clocks {
>>> + xo_board: xo-board {
>>> + compatible = "fixed-clock";
>>> + clock-frequency = <19200000>;
>>> + clock-output-names = "xo_board";
>>> + #clock-cells = <0>;
>>> + };
>>> +
>>> + sleep_clk: sleep-clk {
>>> + compatible = "fixed-clock";
>>> + clock-frequency = <32000>;
>>> + #clock-cells = <0>;
>>> + };
>>> +
>>> + pcie_0_pipe_clk: pcie-0-pipe-clk {
>>> + compatible = "fixed-clock";
>>> + clock-frequency = <1000>;
>>> + clock-output-names = "pcie_0_pipe_clk";
>>> + #clock-cells = <0>;
>>> + };
>>> +
>>> + pcie_0_phy_aux_clk: pcie-0-phy-aux-clk {
>>> + compatible = "fixed-clock";
>>> + clock-frequency = <1000>;
>>> + clock-output-names = "pcie_0_phy_aux_clk";
>>> + #clock-cells = <0>;
>>> + };
>>> +
>>> + usb3_phy_wrapper_pipe_clk: usb3-phy-wrapper-pipe-clk {
>>> + compatible = "fixed-clock";
>>> + clock-frequency = <1000>;
>>> + clock-output-names = "usb3_phy_wrapper_pipe_clk";
>>> + #clock-cells = <0>;
>>> + };
>> Do these pipe clocks not come from QMPPHY?
>
> Yes they do; I just don't have those phys ready yet. I can put a TODO here to
> move them if necessary.
Just use <0> instead of adding a dummy fixed clock.
--
With best wishes
Dmitry
Powered by blists - more mailing lists