linux-kernel - Re: [PATCH v4 4/4] arm64: dts: qcom: sm6125: Initial support for xiaomi-laurel-sprout

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Sun, 18 Dec 2022 11:26:22 -0300
From:   Lux Aliaga <they@...t.lgbt>
To:     Konrad Dybcio <konrad.dybcio@...aro.org>,
        Andy Gross <agross@...nel.org>,
        Bjorn Andersson <andersson@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Kees Cook <keescook@...omium.org>,
        Tony Luck <tony.luck@...el.com>,
        "Guilherme G. Piccoli" <gpiccoli@...lia.com>
Cc:     linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-hardening@...r.kernel.org
Subject: Re: [PATCH v4 4/4] arm64: dts: qcom: sm6125: Initial support for
 xiaomi-laurel-sprout


On 17/12/2022 11:23, Konrad Dybcio wrote:
> On 16.12.2022 21:27, Lux Aliaga wrote:
>> On 16/12/2022 08:32, Konrad Dybcio wrote:
>>> On 15.12.2022 20:04, Lux Aliaga wrote:
>>>> Adds support for the Xiaomi Mi A3 (xiaomi-laurel-sprout). Here's a
>>>> summary on what's working.
>>>>
>>>> - dmesg output to bootloader preconfigured display
>>>> - USB
>>>> - UFS
>>>> - SMD RPM regulators
>>>>
>>>> Signed-off-by: Lux Aliaga <they@...t.lgbt>
>>>> ---
>>>>    arch/arm64/boot/dts/qcom/Makefile             |   1 +
>>>>    .../dts/qcom/sm6125-xiaomi-laurel-sprout.dts  | 254 ++++++++++++++++++
>>>>    2 files changed, 255 insertions(+)
>>>>    create mode 100644 arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts
>>>>
>>>> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
>>>> index 3e79496292e7..2b2a0170db14 100644
>>>> --- a/arch/arm64/boot/dts/qcom/Makefile
>>>> +++ b/arch/arm64/boot/dts/qcom/Makefile
>>>> @@ -157,6 +157,7 @@ dtb-$(CONFIG_ARCH_QCOM)    += sdm850-lenovo-yoga-c630.dtb
>>>>    dtb-$(CONFIG_ARCH_QCOM)    += sdm850-samsung-w737.dtb
>>>>    dtb-$(CONFIG_ARCH_QCOM)    += sm4250-oneplus-billie2.dtb
>>>>    dtb-$(CONFIG_ARCH_QCOM)    += sm6125-sony-xperia-seine-pdx201.dtb
>>>> +dtb-$(CONFIG_ARCH_QCOM)    += sm6125-xiaomi-laurel-sprout.dtb
>>>>    dtb-$(CONFIG_ARCH_QCOM)    += sm6350-sony-xperia-lena-pdx213.dtb
>>>>    dtb-$(CONFIG_ARCH_QCOM)    += sm6375-sony-xperia-murray-pdx225.dtb
>>>>    dtb-$(CONFIG_ARCH_QCOM)    += sm7225-fairphone-fp4.dtb
>>>> diff --git a/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts
>>>> new file mode 100644
>>>> index 000000000000..86e1ec47bf5e
>>>> --- /dev/null
>>>> +++ b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts
>>>> @@ -0,0 +1,254 @@
>>>> +// SPDX-License-Identifier: BSD-3-Clause
>>>> +/*
>>>> + * Copyright (c) 2022, Lux Aliaga <they@...t.lgbt>
>>>> + */
>>>> +
>>>> +/dts-v1/;
>>>> +
>>>> +#include <dt-bindings/gpio/gpio.h>
>>>> +#include <dt-bindings/input/input.h>
>>>> +#include <dt-bindings/input/gpio-keys.h>
>>>> +#include "sm6125.dtsi"
>>>> +
>>>> +/ {
>>>> +    model = "Xiaomi Mi A3";
>>>> +    compatible = "xiaomi,laurel-sprout", "qcom,sm6125";
>>>> +    chassis-type = "handset";
>>>> +
>>>> +    /* required for bootloader to select correct board */
>>>> +    qcom,msm-id = <394 0>; /* sm6125 v0 */
>>> Unless you have a prototype device, this is not correct.
>>>
>>> Please run `cat /sys/bus/soc/devices/soc0/revision` and confirm
>>> which revision is used on your phone.
>> This segment has already been cross-referenced from downstream, and the device boots up successfully when using this ID, unless you're referring to the comment next to it, in which case I can recheck later, since currently I'm away from my device.
> The device boots fine, because the DTB selection works on a "best match"
> basis. If it can't find one for the exact version of the SoC, it may
> try to boot the closest one.
>
> Konrad

Confirmed it. It's an sm6125 v1. Will fix.

-- 
Lux Aliaga
https://nixgoat.me/