[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20221228145704.939801-1-w.egorov@phytec.de>
Date: Wed, 28 Dec 2022 15:57:04 +0100
From: Wadim Egorov <w.egorov@...tec.de>
To: <upstream@...ts.phytec.de>, <linux-kernel@...r.kernel.org>,
<dri-devel@...ts.freedesktop.org>
CC: <daniel@...ll.ch>, <airlied@...il.com>, <jernej.skrabec@...il.com>,
<jonas@...boo.se>, <Laurent.pinchart@...asonboard.com>,
<robert.foss@...aro.org>, <neil.armstrong@...aro.org>,
<andrzej.hajda@...el.com>
Subject: [PATCH] drm/bridge: sii902x: Allow reset line to be tied to a sleepy GPIO controller
Switch to gpiod_set_value_cansleep() in sii902x_reset().
This is relevant if the reset line is tied to a I2C GPIO
controller.
Signed-off-by: Wadim Egorov <w.egorov@...tec.de>
---
drivers/gpu/drm/bridge/sii902x.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/bridge/sii902x.c b/drivers/gpu/drm/bridge/sii902x.c
index 878fb7d3732b..980611aec2f6 100644
--- a/drivers/gpu/drm/bridge/sii902x.c
+++ b/drivers/gpu/drm/bridge/sii902x.c
@@ -240,12 +240,12 @@ static void sii902x_reset(struct sii902x *sii902x)
if (!sii902x->reset_gpio)
return;
- gpiod_set_value(sii902x->reset_gpio, 1);
+ gpiod_set_value_cansleep(sii902x->reset_gpio, 1);
/* The datasheet says treset-min = 100us. Make it 150us to be sure. */
usleep_range(150, 200);
- gpiod_set_value(sii902x->reset_gpio, 0);
+ gpiod_set_value_cansleep(sii902x->reset_gpio, 0);
}
static enum drm_connector_status sii902x_detect(struct sii902x *sii902x)
--
2.34.1
Powered by blists - more mailing lists