linux-kernel - [PATCH 09/18] arm64: dts: qcom: sm6350: Pad addresses to 8 hex digits

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [day] [month] [year] [list]

Message-Id: <20221231125911.437599-10-konrad.dybcio@linaro.org>
Date:   Sat, 31 Dec 2022 13:59:02 +0100
From:   Konrad Dybcio <konrad.dybcio@...aro.org>
To:     linux-arm-msm@...r.kernel.org, andersson@...nel.org,
        agross@...nel.org, krzysztof.kozlowski@...aro.org
Cc:     marijn.suijten@...ainline.org,
        Konrad Dybcio <konrad.dybcio@...aro.org>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH 09/18] arm64: dts: qcom: sm6350: Pad addresses to 8 hex digits

Some addresses were 7-hex-digits long, or less. Fix that.

Signed-off-by: Konrad Dybcio <konrad.dybcio@...aro.org>
---
 arch/arm64/boot/dts/qcom/sm6350.dtsi | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
index 8944dcbbe3a2..e71ffc31d41e 100644
--- a/arch/arm64/boot/dts/qcom/sm6350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
@@ -557,7 +557,7 @@ gpi_dma0: dma-controller@...000 {
 
 		qupv3_id_0: geniqup@...000 {
 			compatible = "qcom,geni-se-qup";
-			reg = <0x0 0x8c0000 0x0 0x2000>;
+			reg = <0x0 0x008c0000 0x0 0x2000>;
 			clock-names = "m-ahb", "s-ahb";
 			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
 				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
@@ -630,7 +630,7 @@ gpi_dma1: dma-controller@...000 {
 
 		qupv3_id_1: geniqup@...000 {
 			compatible = "qcom,geni-se-qup";
-			reg = <0x0 0x9c0000 0x0 0x2000>;
+			reg = <0x0 0x009c0000 0x0 0x2000>;
 			clock-names = "m-ahb", "s-ahb";
 			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
 				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
@@ -702,7 +702,7 @@ i2c8: i2c@...000 {
 
 			uart9: serial@...000 {
 				compatible = "qcom,geni-debug-uart";
-				reg = <0 0x98c000 0 0x4000>;
+				reg = <0 0x0098c000 0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
 				pinctrl-names = "default";
@@ -1654,11 +1654,11 @@ aoss_qmp: power-controller@...0000 {
 
 		spmi_bus: spmi@...0000 {
 			compatible = "qcom,spmi-pmic-arb";
-			reg = <0 0xc440000 0 0x1100>,
-			      <0 0xc600000 0 0x2000000>,
-			      <0 0xe600000 0 0x100000>,
-			      <0 0xe700000 0 0xa0000>,
-			      <0 0xc40a000 0 0x26000>;
+			reg = <0 0x0c440000 0 0x1100>,
+			      <0 0x0c600000 0 0x2000000>,
+			      <0 0x0e600000 0 0x100000>,
+			      <0 0x0e700000 0 0xa0000>,
+			      <0 0x0c40a000 0 0x26000>;
 			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
 			interrupt-names = "periph_irq";
 			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
-- 
2.39.0