lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <Y7Mlf5a9jp42w73t@ravnborg.org>
Date:   Mon, 2 Jan 2023 19:42:07 +0100
From:   Sam Ravnborg <sam@...nborg.org>
To:     Javier Martinez Canillas <javierm@...hat.com>
Cc:     linux-kernel@...r.kernel.org, Ondrej Jirman <megous@...ous.com>,
        Purism Kernel Team <kernel@...i.sm>,
        Guido Günther <agx@...xcpu.org>,
        dri-devel@...ts.freedesktop.org,
        Thierry Reding <thierry.reding@...il.com>
Subject: Re: [PATCH 03/14] drm/panel-sitronix-st7703: Drop custom DSI write
 macros

Hi Javier,

On Wed, Dec 28, 2022 at 02:47:46AM +0100, Javier Martinez Canillas wrote:
> There are macros for these already in the <drm/drm_mipi_dsi.h> header, use
> that instead and delete the custom DSI write macros defined in the driver.
> 
> Signed-off-by: Javier Martinez Canillas <javierm@...hat.com>
> ---
> 
>  drivers/gpu/drm/panel/panel-sitronix-st7703.c | 83 ++++++++-----------
>  1 file changed, 33 insertions(+), 50 deletions(-)
> 
> diff --git a/drivers/gpu/drm/panel/panel-sitronix-st7703.c b/drivers/gpu/drm/panel/panel-sitronix-st7703.c
> index 86a472b01360..3e6655c2727e 100644
> --- a/drivers/gpu/drm/panel/panel-sitronix-st7703.c
> +++ b/drivers/gpu/drm/panel/panel-sitronix-st7703.c
> @@ -73,14 +73,6 @@ static inline struct st7703 *panel_to_st7703(struct drm_panel *panel)
>  	return container_of(panel, struct st7703, panel);
>  }
>  
> -#define dsi_generic_write_seq(dsi, seq...) do {				\
> -		static const u8 d[] = { seq };				\
> -		int ret;						\
> -		ret = mipi_dsi_generic_write(dsi, d, ARRAY_SIZE(d));	\
> -		if (ret < 0)						\
> -			return ret;					\
> -	} while (0)
> -
>  static int jh057n_init_sequence(struct st7703 *ctx)
>  {
>  	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
> @@ -90,27 +82,27 @@ static int jh057n_init_sequence(struct st7703 *ctx)
>  	 * resemble the ST7703 but the number of parameters often don't match
>  	 * so it's likely a clone.
>  	 */
> -	dsi_generic_write_seq(dsi, ST7703_CMD_SETEXTC,
> +	mipi_dsi_generic_write_seq(dsi, ST7703_CMD_SETEXTC,
>  			      0xF1, 0x12, 0x83);
Fix indent here, and in similar places below.
With that fixed:
Reviewed-by: Sam Ravnborg <sam@...nborg.org>

> -	dsi_generic_write_seq(dsi, ST7703_CMD_SETRGBIF,
> +	mipi_dsi_generic_write_seq(dsi, ST7703_CMD_SETRGBIF,
>  			      0x10, 0x10, 0x05, 0x05, 0x03, 0xFF, 0x00, 0x00,
>  			      0x00, 0x00);
> -	dsi_generic_write_seq(dsi, ST7703_CMD_SETSCR,
> +	mipi_dsi_generic_write_seq(dsi, ST7703_CMD_SETSCR,
>  			      0x73, 0x73, 0x50, 0x50, 0x00, 0x00, 0x08, 0x70,
>  			      0x00);
> -	dsi_generic_write_seq(dsi, ST7703_CMD_SETVDC, 0x4E);
> -	dsi_generic_write_seq(dsi, ST7703_CMD_SETPANEL, 0x0B);
> -	dsi_generic_write_seq(dsi, ST7703_CMD_SETCYC, 0x80);
> -	dsi_generic_write_seq(dsi, ST7703_CMD_SETDISP, 0xF0, 0x12, 0x30);
> -	dsi_generic_write_seq(dsi, ST7703_CMD_SETEQ,
> +	mipi_dsi_generic_write_seq(dsi, ST7703_CMD_SETVDC, 0x4E);
> +	mipi_dsi_generic_write_seq(dsi, ST7703_CMD_SETPANEL, 0x0B);
> +	mipi_dsi_generic_write_seq(dsi, ST7703_CMD_SETCYC, 0x80);
> +	mipi_dsi_generic_write_seq(dsi, ST7703_CMD_SETDISP, 0xF0, 0x12, 0x30);
> +	mipi_dsi_generic_write_seq(dsi, ST7703_CMD_SETEQ,
>  			      0x07, 0x07, 0x0B, 0x0B, 0x03, 0x0B, 0x00, 0x00,
>  			      0x00, 0x00, 0xFF, 0x00, 0xC0, 0x10);
> -	dsi_generic_write_seq(dsi, ST7703_CMD_SETBGP, 0x08, 0x08);
> +	mipi_dsi_generic_write_seq(dsi, ST7703_CMD_SETBGP, 0x08, 0x08);
>  	msleep(20);
>  
> -	dsi_generic_write_seq(dsi, ST7703_CMD_SETVCOM, 0x3F, 0x3F);
> -	dsi_generic_write_seq(dsi, ST7703_CMD_UNKNOWN_BF, 0x02, 0x11, 0x00);
> -	dsi_generic_write_seq(dsi, ST7703_CMD_SETGIP1,
> +	mipi_dsi_generic_write_seq(dsi, ST7703_CMD_SETVCOM, 0x3F, 0x3F);
> +	mipi_dsi_generic_write_seq(dsi, ST7703_CMD_UNKNOWN_BF, 0x02, 0x11, 0x00);
> +	mipi_dsi_generic_write_seq(dsi, ST7703_CMD_SETGIP1,
>  			      0x82, 0x10, 0x06, 0x05, 0x9E, 0x0A, 0xA5, 0x12,
>  			      0x31, 0x23, 0x37, 0x83, 0x04, 0xBC, 0x27, 0x38,
>  			      0x0C, 0x00, 0x03, 0x00, 0x00, 0x00, 0x0C, 0x00,
> @@ -119,7 +111,7 @@ static int jh057n_init_sequence(struct st7703 *ctx)
>  			      0x64, 0x20, 0x88, 0x88, 0x88, 0x88, 0x88, 0x88,
>  			      0x02, 0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
>  			      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00);
> -	dsi_generic_write_seq(dsi, ST7703_CMD_SETGIP2,
> +	mipi_dsi_generic_write_seq(dsi, ST7703_CMD_SETGIP2,
>  			      0x02, 0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
>  			      0x00, 0x00, 0x00, 0x00, 0x02, 0x46, 0x02, 0x88,
>  			      0x88, 0x88, 0x88, 0x88, 0x88, 0x64, 0x88, 0x13,
> @@ -128,7 +120,7 @@ static int jh057n_init_sequence(struct st7703 *ctx)
>  			      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
>  			      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x0A,
>  			      0xA5, 0x00, 0x00, 0x00, 0x00);
> -	dsi_generic_write_seq(dsi, ST7703_CMD_SETGAMMA,
> +	mipi_dsi_generic_write_seq(dsi, ST7703_CMD_SETGAMMA,
>  			      0x00, 0x09, 0x0E, 0x29, 0x2D, 0x3C, 0x41, 0x37,
>  			      0x07, 0x0B, 0x0D, 0x10, 0x11, 0x0F, 0x10, 0x11,
>  			      0x18, 0x00, 0x09, 0x0E, 0x29, 0x2D, 0x3C, 0x41,
> @@ -162,15 +154,6 @@ static const struct st7703_panel_desc jh057n00900_panel_desc = {
>  	.init_sequence = jh057n_init_sequence,
>  };
>  
> -#define dsi_dcs_write_seq(dsi, cmd, seq...) do {			\
> -		static const u8 d[] = { seq };				\
> -		int ret;						\
> -		ret = mipi_dsi_dcs_write(dsi, cmd, d, ARRAY_SIZE(d));	\
> -		if (ret < 0)						\
> -			return ret;					\
> -	} while (0)
> -
> -
>  static int xbd599_init_sequence(struct st7703 *ctx)
>  {
>  	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
> @@ -180,9 +163,9 @@ static int xbd599_init_sequence(struct st7703 *ctx)
>  	 */
>  
>  	/* Magic sequence to unlock user commands below. */
> -	dsi_dcs_write_seq(dsi, ST7703_CMD_SETEXTC, 0xF1, 0x12, 0x83);
> +	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETEXTC, 0xF1, 0x12, 0x83);
>  
> -	dsi_dcs_write_seq(dsi, ST7703_CMD_SETMIPI,
> +	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETMIPI,
>  			  0x33, /* VC_main = 0, Lane_Number = 3 (4 lanes) */
>  			  0x81, /* DSI_LDO_SEL = 1.7V, RTERM = 90 Ohm */
>  			  0x05, /* IHSRX = x6 (Low High Speed driving ability) */
> @@ -194,14 +177,14 @@ static int xbd599_init_sequence(struct st7703 *ctx)
>  			  0x44, 0x25, 0x00, 0x91, 0x0a, 0x00, 0x00, 0x02,
>  			  0x4F, 0x11, 0x00, 0x00, 0x37);
>  
> -	dsi_dcs_write_seq(dsi, ST7703_CMD_SETPOWER_EXT,
> +	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETPOWER_EXT,
>  			  0x25, /* PCCS = 2, ECP_DC_DIV = 1/4 HSYNC */
>  			  0x22, /* DT = 15ms XDK_ECP = x2 */
>  			  0x20, /* PFM_DC_DIV = /1 */
>  			  0x03  /* ECP_SYNC_EN = 1, VGX_SYNC_EN = 1 */);
>  
>  	/* RGB I/F porch timing */
> -	dsi_dcs_write_seq(dsi, ST7703_CMD_SETRGBIF,
> +	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETRGBIF,
>  			  0x10, /* VBP_RGB_GEN */
>  			  0x10, /* VFP_RGB_GEN */
>  			  0x05, /* DE_BP_RGB_GEN */
> @@ -212,7 +195,7 @@ static int xbd599_init_sequence(struct st7703 *ctx)
>  			  0x00, 0x00);
>  
>  	/* Source driving settings. */
> -	dsi_dcs_write_seq(dsi, ST7703_CMD_SETSCR,
> +	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETSCR,
>  			  0x73, /* N_POPON */
>  			  0x73, /* N_NOPON */
>  			  0x50, /* I_POPON */
> @@ -224,19 +207,19 @@ static int xbd599_init_sequence(struct st7703 *ctx)
>  			  0x00  /* Undocumented */);
>  
>  	/* NVDDD_SEL = -1.8V, VDDD_SEL = out of range (possibly 1.9V?) */
> -	dsi_dcs_write_seq(dsi, ST7703_CMD_SETVDC, 0x4E);
> +	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETVDC, 0x4E);
>  
>  	/*
>  	 * SS_PANEL = 1 (reverse scan), GS_PANEL = 0 (normal scan)
>  	 * REV_PANEL = 1 (normally black panel), BGR_PANEL = 1 (BGR)
>  	 */
> -	dsi_dcs_write_seq(dsi, ST7703_CMD_SETPANEL, 0x0B);
> +	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETPANEL, 0x0B);
>  
>  	/* Zig-Zag Type C column inversion. */
> -	dsi_dcs_write_seq(dsi, ST7703_CMD_SETCYC, 0x80);
> +	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETCYC, 0x80);
>  
>  	/* Set display resolution. */
> -	dsi_dcs_write_seq(dsi, ST7703_CMD_SETDISP,
> +	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETDISP,
>  			  0xF0, /* NL = 240 */
>  			  0x12, /* RES_V_LSB = 0, BLK_CON = VSSD,
>  				 * RESO_SEL = 720RGB
> @@ -246,7 +229,7 @@ static int xbd599_init_sequence(struct st7703 *ctx)
>  				 * ISC = 0 frames
>  				 */);
>  
> -	dsi_dcs_write_seq(dsi, ST7703_CMD_SETEQ,
> +	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETEQ,
>  			  0x00, /* PNOEQ */
>  			  0x00, /* NNOEQ */
>  			  0x0B, /* PEQGND */
> @@ -267,9 +250,9 @@ static int xbd599_init_sequence(struct st7703 *ctx)
>  				 */);
>  
>  	/* Undocumented command. */
> -	dsi_dcs_write_seq(dsi, ST7703_CMD_UNKNOWN_C6, 0x01, 0x00, 0xFF, 0xFF, 0x00);
> +	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_UNKNOWN_C6, 0x01, 0x00, 0xFF, 0xFF, 0x00);
>  
> -	dsi_dcs_write_seq(dsi, ST7703_CMD_SETPOWER,
> +	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETPOWER,
>  			  0x74, /* VBTHS, VBTLS: VGH = 17V, VBL = -11V */
>  			  0x00, /* FBOFF_VGH = 0, FBOFF_VGL = 0 */
>  			  0x32, /* VRP  */
> @@ -287,20 +270,20 @@ static int xbd599_init_sequence(struct st7703 *ctx)
>  			  0x77  /* VGH3_R_DIV, VGL3_R_DIV (4.5MHz) */);
>  
>  	/* Reference voltage. */
> -	dsi_dcs_write_seq(dsi, ST7703_CMD_SETBGP,
> +	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETBGP,
>  			  0x07, /* VREF_SEL = 4.2V */
>  			  0x07  /* NVREF_SEL = 4.2V */);
>  	msleep(20);
>  
> -	dsi_dcs_write_seq(dsi, ST7703_CMD_SETVCOM,
> +	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETVCOM,
>  			  0x2C, /* VCOMDC_F = -0.67V */
>  			  0x2C  /* VCOMDC_B = -0.67V */);
>  
>  	/* Undocumented command. */
> -	dsi_dcs_write_seq(dsi, ST7703_CMD_UNKNOWN_BF, 0x02, 0x11, 0x00);
> +	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_UNKNOWN_BF, 0x02, 0x11, 0x00);
>  
>  	/* This command is to set forward GIP timing. */
> -	dsi_dcs_write_seq(dsi, ST7703_CMD_SETGIP1,
> +	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETGIP1,
>  			  0x82, 0x10, 0x06, 0x05, 0xA2, 0x0A, 0xA5, 0x12,
>  			  0x31, 0x23, 0x37, 0x83, 0x04, 0xBC, 0x27, 0x38,
>  			  0x0C, 0x00, 0x03, 0x00, 0x00, 0x00, 0x0C, 0x00,
> @@ -311,7 +294,7 @@ static int xbd599_init_sequence(struct st7703 *ctx)
>  			  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00);
>  
>  	/* This command is to set backward GIP timing. */
> -	dsi_dcs_write_seq(dsi, ST7703_CMD_SETGIP2,
> +	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETGIP2,
>  			  0x02, 0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
>  			  0x00, 0x00, 0x00, 0x00, 0x02, 0x46, 0x02, 0x88,
>  			  0x88, 0x88, 0x88, 0x88, 0x88, 0x64, 0x88, 0x13,
> @@ -322,7 +305,7 @@ static int xbd599_init_sequence(struct st7703 *ctx)
>  			  0xA5, 0x00, 0x00, 0x00, 0x00);
>  
>  	/* Adjust the gamma characteristics of the panel. */
> -	dsi_dcs_write_seq(dsi, ST7703_CMD_SETGAMMA,
> +	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETGAMMA,
>  			  0x00, 0x09, 0x0D, 0x23, 0x27, 0x3C, 0x41, 0x35,
>  			  0x07, 0x0D, 0x0E, 0x12, 0x13, 0x10, 0x12, 0x12,
>  			  0x18, 0x00, 0x09, 0x0D, 0x23, 0x27, 0x3C, 0x41,
> @@ -499,7 +482,7 @@ static int allpixelson_set(void *data, u64 val)
>  	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
>  
>  	dev_dbg(ctx->dev, "Setting all pixels on\n");
> -	dsi_generic_write_seq(dsi, ST7703_CMD_ALL_PIXEL_ON);
> +	mipi_dsi_generic_write_seq(dsi, ST7703_CMD_ALL_PIXEL_ON);
>  	msleep(val * 1000);
>  	/* Reset the panel to get video back */
>  	drm_panel_disable(&ctx->panel);
> -- 
> 2.38.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ