[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230108162554.8375-3-dario.binacchi@amarulasolutions.com>
Date: Sun, 8 Jan 2023 17:25:51 +0100
From: Dario Binacchi <dario.binacchi@...rulasolutions.com>
To: linux-kernel@...r.kernel.org
Cc: Vincent Mailhol <mailhol.vincent@...adoo.fr>,
Amarula patchwork <linux-amarula@...rulasolutions.com>,
Alexandre Torgue <alexandre.torgue@...s.st.com>,
Marc Kleine-Budde <mkl@...gutronix.de>,
Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>,
Rob Herring <robh@...nel.org>, michael@...rulasolutions.com,
Dario Binacchi <dario.binacchi@...rulasolutions.com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
Paolo Abeni <pabeni@...hat.com>,
Rob Herring <robh+dt@...nel.org>,
Wolfgang Grandegger <wg@...ndegger.com>,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-can@...r.kernel.org,
linux-stm32@...md-mailman.stormreply.com, netdev@...r.kernel.org
Subject: [RESEND RFC PATCH v5 2/5] dt-bindings: net: can: add STM32 bxcan DT bindings
Add documentation of device tree bindings for the STM32 basic extended
CAN (bxcan) controller.
Signed-off-by: Dario Binacchi <dario.binacchi@...rulasolutions.com>
Reviewed-by: Rob Herring <robh@...nel.org>
---
Changes in v5:
- Add Rob Herring's Reviewed-by tag.
Changes in v4:
- Remove "st,stm32f4-bxcan-core" compatible. In this way the can nodes
(compatible "st,stm32f4-bxcan") are no longer children of a parent
node with compatible "st,stm32f4-bxcan-core".
- Add the "st,gcan" property (global can memory) to can nodes which
references a "syscon" node containing the shared clock and memory
addresses.
Changes in v3:
- Remove 'Dario Binacchi <dariobin@...ero.it>' SOB.
- Add description to the parent of the two child nodes.
- Move "patterProperties:" after "properties: in top level before "required".
- Add "clocks" to the "required:" list of the child nodes.
Changes in v2:
- Change the file name into 'st,stm32-bxcan-core.yaml'.
- Rename compatibles:
- st,stm32-bxcan-core -> st,stm32f4-bxcan-core
- st,stm32-bxcan -> st,stm32f4-bxcan
- Rename master property to st,can-master.
- Remove the status property from the example.
- Put the node child properties as required.
.../bindings/net/can/st,stm32-bxcan.yaml | 83 +++++++++++++++++++
1 file changed, 83 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/can/st,stm32-bxcan.yaml
diff --git a/Documentation/devicetree/bindings/net/can/st,stm32-bxcan.yaml b/Documentation/devicetree/bindings/net/can/st,stm32-bxcan.yaml
new file mode 100644
index 000000000000..c9194345d202
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/st,stm32-bxcan.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/can/st,stm32-bxcan.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics bxCAN controller
+
+description: STMicroelectronics BxCAN controller for CAN bus
+
+maintainers:
+ - Dario Binacchi <dario.binacchi@...rulasolutions.com>
+
+allOf:
+ - $ref: can-controller.yaml#
+
+properties:
+ compatible:
+ enum:
+ - st,stm32f4-bxcan
+
+ st,can-master:
+ description:
+ Master and slave mode of the bxCAN peripheral is only relevant
+ if the chip has two CAN peripherals. In that case they share
+ some of the required logic.
+ type: boolean
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ items:
+ - description: transmit interrupt
+ - description: FIFO 0 receive interrupt
+ - description: FIFO 1 receive interrupt
+ - description: status change error interrupt
+
+ interrupt-names:
+ items:
+ - const: tx
+ - const: rx0
+ - const: rx1
+ - const: sce
+
+ resets:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ st,gcan:
+ $ref: "/schemas/types.yaml#/definitions/phandle-array"
+ description:
+ The phandle to the gcan node which allows to access the 512-bytes
+ SRAM memory shared by the two bxCAN cells (CAN1 master and CAN2
+ slave) in dual CAN peripheral configuration.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - resets
+ - clocks
+ - st,gcan
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/stm32fx-clock.h>
+ #include <dt-bindings/mfd/stm32f4-rcc.h>
+
+ can1: can@...06400 {
+ compatible = "st,stm32f4-bxcan";
+ reg = <0x40006400 0x200>;
+ interrupts = <19>, <20>, <21>, <22>;
+ interrupt-names = "tx", "rx0", "rx1", "sce";
+ resets = <&rcc STM32F4_APB1_RESET(CAN1)>;
+ clocks = <&rcc 0 STM32F4_APB1_CLOCK(CAN1)>;
+ st,can-master;
+ st,gcan = <&gcan>;
+ };
--
2.32.0
Powered by blists - more mailing lists